False backup / archive alerts after system refresh

We have implemented CCMS on our systems. We recently refreshed our QTS system with a backup of production (PTD). CCMS is now sending alerts for backups and archives. It tells us that the backup and archive did never run.
I checked DB12 and found that there is no data in DB12. This is probably due to the system refresh.
Is there any extra post refresh step that we can do to prevent these false alerts (other than running a full online backup as post refresh step)? Is it possible to export the backup information (tables used by DB12) as pre refresh step and re-import them after the refresh?

Kevin DK wrote:
Will it create issues if we do not delete tables SDBAH and SDBAD during the refresh?
No. BTW, tables are not to be deleted, just the table 'entries'.
Thanks

Similar Messages

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

Backup of background jobs after system refresh

Hi All,
I want to know that during the system refresh how can we take the backup of the background jobs which are in "Released" state so that we can schedule them the same way after the refresh is done. Presently we are taking the screen shot of "start condition" and "step" of each and every job and then using those screenshots we are scheduling them again after the refresh is completed. It would be really helpful and time saving for us if we come to know the tables where this information is stored and also if there is any other easier way for this.
Regards,
Lovneesh

Hello,
Check the below thread. It mentions all the tables that contain batch job information.
https://scn.sap.com/thread/1709175
" Check below mentioned tables
BTCCTL,
BTCDELAY
BTCEVTJOB
BTCH1000
BTCH1010
TBTCO
TBTCP
These have all the information you need regarding background jobs, you may export these tables at the source and import them "
Check and provide feedback.
Regards,
Mudasir

Portal down after system refresh

Hello all,
We have done a system refresh for QAS from PROD for BI with export import of the backup into test. Everything was ok and refreshed BI is working fine but the SAP BI PORTAL is down. Nothing it is working. I can`t acces the link of the portal nor the visual admin nor configtool. Can you help us making the test working. I know a solution of reinstalling the portal with sapinst but i do not belive that this is the only solution.
The Test Portal have nothing changed. It is the same like it was but the BIT has changed a lot. Can anybody give some ideas how to make it work?
I give you some information found in logs:
dev_jrfc.trc :    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Tue Aug 24 09:21:56,809<
RfcException:
    message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=11 GWHOST=localhost GWSERV=sapgw11 PCS=1
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '127.0.0.1:sapgw11' not reached
TIME        Tue Aug 24 09:21:56 201
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2513
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     8
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
default trace: #2#================================== Connection ==================================
ID                            502279030649651208
Type                          QueueConnection
Mode                          STOPPED
isClosed                      YES
com.sap.jms.server.SynchronousNetworkAdapter@32af32af isClosed = false waitTableSize = 0 conectionId = 8----
ConnectionMetaData -
JMSVersion                    Version 1.1
PorviderVersion               Version 1.0
SupportedJMSXProperties       JMSXGroupID, JMSXGroupSeqJMSXDeliveryCount
================================================================================
#javax.jms.JMSException: JMS Service is stopped
SO we can`t acces Visual Admin and configtool.
Thanks in advance

So i have open both files services / hosts.. and everything seems to be ok. On services i found
sapgw11       3311/tcp      # SAP System Gateway Port
The servers are AIX and the DB si Oracle. Nobody changed these files for more than 2 years and before refresh oh QAS the portal worked just fine. Practically the problem is that there is no connection between BI TST and TST portal. Nothing even at unix level. I think the problem is soewhere between DB and portal.. because he can`t find any connection.
Some other log files:
database.1.log :
#1.5 #001A64E912A200310000003B001570BE00048E8BC8337BDA#1282630917258#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectConnection#######SAPEngine_System_Thread[impl:5]_27##0#0#Error#1#com.sap.sql.jdbc.direct.DirectConnection#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection beta:BIT:SAPBIPDB: code=17,002, state="null", message="Io exception: Connection reset";
SQL statement is "ROLLBACK".#5#17002#<null>#Io exception: Connection reset#beta:BIT:SAPBIPDB#ROLLBACK#
server0.log : #1.5 #001A64E912A200450000082C001570BE00048E8BC83E8D97#1282630917983#/System/Server##com.sap.caf.eu.cc.content.svc.CCServiceFrame#######SAPEngine_System_Thread[impl:5]_75##0#0#Error#1#com.sap.caf.eu.cc.content.svc.CCServiceFrame#Plain###Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl
javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl. Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
     at java.lang.Class.forNameImpl(Native Method)
1.5 #001A64E912A200680000003B001570BE00048E8BC82CCE12#1282630916813#/System/Security#sap.com/com.sap.workflow.j2eemoni#com.sap.engine.services.security#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.engine.services.security#Java#security_3031#com.sap.engine.services.security.exceptions.SecurityResourceBundle#Cannot get run_as identity for the security role "".#1#MBeanCreator#
#1.5 #001A64E912A20009000006CF001570BE00048E8BC83BC936#1282630917802#/System/Security##com.sap.engine.services.userstore#######SAPEngine_System_Thread[impl:5]_64##0#0#Info#1#com.sap.engine.services.userstore#Plain###Service userstore stopped OK#
Thanks

SDCCN settings after system refresh

Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
Satya

Hi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani

TMS, profiles after System Refresh

Hi All,
I have done a system refresh from PD1(old prod) to PRD(new prod) on new server.
I faced following problem after the refresh.
1. The instance profile of PD1 had many parameter.., after copying that in PRD, sap wont start. So I have commented many of those parameter from the instance profile of PRD?
2. After the refresh, since PRD doesnt have the transport request of PD1, how do I put those request to PRD?
I have the backup of \trans folder of PD1.
Regards
Prash

Hi,
Rename the file from \trans\buffer\HD1 to PRD worked!!!
-> the only concern if transport buffer is clean up in between then some request was missing in import queue of PRD.
zcsa/installed_languages = DE
this should be ED
zcsa/system_language = E is OK.
install/codepage/appl_server = 1100 -> this is for codepage installed on your application server
I get message like PXA_NO_SHARED_MEMORY occured
and SYSTEM_NO_ROLL occured..
-> are you using 32 bit OS ?
check Note 103747 - Performance: Parameter recommendations as of Release 4.0
Note 88416 - Zero administration memory management as of 4.0A/ Windows
also consider Note 129813 - Windows: Problems due to address space fragmentation
regards,
kaushal

Unable to login in EP 6.0 after system refresh

After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.

Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish

Windows 8.1 will not activate on HP19-2113w after system refresh.

Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

Adding transports to import queue after System Refresh

Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
Ravi

Thanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Restore periodic batch job after system refresh

Hi all
I am going to do a system refresh and is there anyway to restore my periodic batch jobs after the system refresh or i need to reschedule all of them manually.Thanks in advance.

You'll need to do them manually.
Regards
Juan

False backup / archive alerts after system refresh

Similar Messages

Maybe you are looking for