False Monitoring Message in SXMB_MONI

Dear All,
We are working on a simple File-XI-File scenario. The reciever communication channel is inactive and the file is not getting created at the required destination.
It is giving an error message in Adapter Monitoring but its showing a success message in SXMB_MONI.
I am really surprised seeing this.
I am using XI 3.0 with SP-15. Please tell me what might be the probllem in the scenario or in the server as i am getting a success message in SXMB_MONI.
Warm Regards,
N.Jain

Hi,
>>
when the receiver communication channel is inactive and the file has not got created at the target end then how it can show a success flag in SXMB_MONI?
It is showing success in sxmb_moni because in sxmb_moni ,you can monitor only the ABAP part of the pipeline. Whereas, if you goto message monitoring in RWB, you will find some error like "Waiting". also the adapter monitoring tracks the error as you see it
>>If I am doing Content Conversion at the receiver file adapter with some wrong parameters, it is showing error in the Adapter Monitoring (Red Status of Comm Channel) wheras it is showing a success message in SXMB_MONI.
Again, the concept remains the same. Errors related to the CC are not of a concern to SXMB_moni. At sxmb_moni, it shows the status of the message processed only until the message has been taken from the Outbound Queue. hence, you see success message in sxmb_moni
regards
krishna

Similar Messages

No message in SXMB_MONI

Hi People,
I can see my message being processed in communication channel monitoring for mail adapter, but cannot see any message in SXMB_MONI.
In what scenarios can it happen?
Thanks.

Hi,
Go to SXMB_ADM and select the integration engine configuration
then select Runtime as a parameter and click specific configuration data and there need to set the parameters
1. LOGGING value to 1
2. LOGGING_SYNC value to 1
3. TRACE_LEVEL value to 3
Check this sap help guide for more details
http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/frameset.htm
HTH
Rajesh

No messages in sxmb_moni in target machine

Hi,
I have file to proxy scenario; and i see http 200 code in PI sxmb_moni; it means it is sucessful, returned back; but i dont see any messages in sxmb_moni of target R3 system. i did check logging; everything is set in sxmb_adm. and also in channel i have sap/xi/engine?type=entry.
how do i check if the proxy is executed on target side?.
Thanks.
Prema

yes i did send another one. when i saw the sucessful message in sxmb_moni of PI i did not check proxy communication channel in channel monitoring; after little research; i went and checked, aha there was an error
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized
thats becuase the PIAPPLUSER was locked.

Urgent : not able to see any message on SXMB_MONI

Hi all ,
I have created a scenario XML->XI->SAP R3 for this i have cretaed data in integration repository and in along with interface object i have created 1 mesg maping( MT--->BAPI ) and and Interface Mapping using the same mesg mapping.
in integration directory i have created 2 communication channels one is of sender(adapter file) and other reciever ( adapter RFC ) and rest other things also .
but when i am checking in SXMB_MONI i am not getting any message i am unable to figure it out where i have done mistake . when i am checking in communication monitor Sender_File_Comm_channel is working fine and Receive_RFC_Comm_channel is showing this message in log :
Receiver channel 'RFC_Reciever' for party '', service 'BS_ACC_FLAT_R3' (internal name 'RfcClient[RFC_Reciever]')
Client data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
Current pool size: 0, maximum pool size : 1
is this communication channel is fine ?
please suggest how to check application is made correct or not ?
thanks in advance
Regards,
Praveen

Hello Praveen,
If I understand correctly the scenario is File -- XI -- RFC and you do not see any message in SXMB_MONI.
I would test the Sender File Adapter first before going to RFC. If the file is picked up and sent to Int Server you would see a corresponding message in SXMB_MONI.
I would first check the Sender File Comm Channel in Comm Channel Monitoring and ensure the file id being picked up.
In case this is not working you would get the exact error in the File Comm Channel. If this channel is working fine and you see a message id for the picked up file but the corresponding message Id is not available in SXMB_MONI, I would have a look at the queues if they are registered properly in SMQR or check if messages are stuck in any queue using SMQ1 and SMQ2 transactions. Please do the following steps and I am sure the scenario would work.
In case you find the problem and are not able to resolve it please post it here and I can suggest something.
Please award points if this post helps you.
Thanks and Best Regards,
Kanwal

How to monitor messages at BAPI side of integration scenario

Hi all,
In scenarios like Soap -> Abap proxy (XI Adapter), I can monitor both sender and receiver messages on sxmb_moni (on XI side and on ECC side). When the scenario is Soap -> BAPI (RFC Adapter), how can I see the messages in the ECC side?
thanks!
roberti

Hi,
If it is an RFC so it resides at JAVA STACK so u cant see the message at ECC end,Proxy and IDOC u can see there message at ECC side they are on ABAP Stack,u can only see message in SXMB_MONI and in RWB for RFC Adapter.
Regards,
Phani
Reward points if Helpful

XI messages in SXMB_MONI

Hi All,
We are not able to receive the messages in Integration engine, but we are able to see them in adapter engine. If we "resend" them manually into integration engine then we are able to see them and the files are being copied.
Also, one more scenario is running which is not there at all in ID nad getting error messages in SXMB_MONI. How to delete this from executing?
Please help us resolve the issue.
Regards,
Phani.

hi
some time adapter engine works as a standalone and the message doesnot comes in IE
go to RWB and select the details of your message there you can get the log of the message processing steps
Also, one more scenario is running which is not there at all in ID nad getting error messages in SXMB_MONI. How to delete this from executing?
for this inside RWB- compnent monitoring - comunication channel and select the sender channel related to this scenario and stop that then it will not pick up the messages
regards
sandeep

I can not find the messages in sxmb_moni in http to rfc scenarion

hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help me

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Can not see messages in SXMB_MONI of ECC

Hi Friends,
             Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1.
when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded now BASIS is very confused about configuration.
             when I went through some blogs I came across some suggestions like configuration in SXMB_ADM. In ECC the integration engine configuration what I did is
               Role of Business System         : Application System.
               Corresponding Integ. Server    : dest://<HTTP DEST>
              One of my doubts:: Is <HTTP DEST> is the one which we are giving in XI/PI or the new one created for ECC. First BASIS set up <HTTP DEST> as the same one which was configured in PI. Then I went back to BASIS and tell them that ECC is having its own local Integration Engine, so we need to create <HTTP DEST> which connects to integration engine of ECC.
               Then they created one <HTTP DEST> for ECC. but when I am doing connection test, Http response is coming as 400 BAD HTTP Response :: protocol error. I have no idea why it is behaving like that.
               After when I go through some more blogs they are dealing with RFC destinations LCRSAPRFC and SAPSLDAPI. when I check it in ECC I didn't found RFC destination LCRSAPRFC but SAPSLDAPI is existing in ECC.
               more over some blogs deal with the configuration in Transaction SLDAPICUST. when I check it in ECC no configuration was done in SLDAPICUST.
               I already configured ENGINE_TYPE, IS_URL, LOGGING, LOGGING_PROPAGATION, LOGGING_SYNC under specific configuration data of SXMB_ADM of ECC.
               Please let me know what needs to be done and let me out of this confusion. As I am a PI developer I am unaware of all these configurations. expecting replies from gurus....
Regards,
DASARI

Hi Friends,
             Looking at some more blogs I got a doubt.
            Actually my scenario is File - XI - RFC.
            Now my doubt is whether we can see the messages which were going to ECC by RFC adapter ?
            Looking at a thread I got confused whether SXMB_MONI can capture messages only if they are coming from Proxy or IDOC . please clarify me.
Regards,
Dasari.

Message in sxmb_moni is getting cancelled in 3 mins

Hi Experts,
Few messages for synchronous interfaces are going in to error status in sxmb_moni after 3 minutes even when a timeout parameter of 5mins is maintained in the module tabe of receiver SOAP adapter. Sender is ECC system. Please help resolve the issue.
Thanks and Regards,
Krish

Hello Krish,
Can you check if you can implement the note #1899735 - XI runtime: Trace of HTTP timeouts. This then writes which configuration parameter determines the timeout within the trace of the message in SXMB_MONI.
Regards
Eoin Kierans

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
   I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP   = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE   = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Cancel processing of message in SXMB_MONI

Hi All,
Can anyone please let me know how to cancel the message when- Scheduled for Outbound Processing Message in SXMB_MONI.

Hi All,
I tried in smq2. The status i LUWs show as follows.
Number of Entries Displayed: 0
Number of Queues Displayed: 0
But in SXMB_MONI there 5000 'Scheduled Outbound Processing Messages'
when i am trying to Cancel the message following message popup
' You cannot cancel XML Message' - when status is in 'Scheduled Outbound Processing Messages'
Can any one please help me

Can not Cancel Processing of Message in SXMB_MONI

Hi all
I'd like to clean up some outstanding error messages in SXMB_MONI but when I try to 'Cancel processing with errors' I get a message stating 'Can not cancel XML message with this status/type' The status is 'System Error - Restart not possible' Message no. XMS_ADM108
Can someone tell me how to get around this?
Thanks, Dennis
A total newbie

Hi Dennis,
you can archive your messages.
Have a look at this links to understand how to do it:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/1dc877301a06f4e10000000a422035/frameset.htm">Deleting Process Data No Longer RequiredDeleting Process Data No Longer Required</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm">Archiving and Deleting</a>
Too many questions on Archive/Delete messages.
Kind Regards,
Sergio

No Messages en SXMB_MONI in R/3 WebAS 6.20 with Add on

Hello everybody,
My problem is as follows, I have a scenario with R/3 ABAP Proxy-> XI R/3 ABAP Proxy, the problem is that I can't see any XML messages in SXMB_MONI in the R/3 Receiver, not synchrnous, not asynchronous, not erroneous, not succesfull messages I can't see any type or kind of messages, the R/3 is a WebAS 6.20 with add on for integration engine so ABAP proxies could work, I've been reading some threads but I think are more for SXMB_MONI in XI than in an R/3 so tose threads talk about some parameters sucha as LOGGING and LOGGING_SYNC and TRACE_LEVEL category RUNTIME, I've read the blog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
from Michal but I can't fin these parameters in the R/3 they don't exist does anyone have any other suggestions? thanks in advance.
Regards,
Julio Cesar Ruiz

hi,
u have to do settings in sxmb_adm.
follow the links;
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
other links u can follow:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/499240ed38ce62e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/00143f011f4b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b714f55ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/dd0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/471241043ff06fe10000000a1550b0/frameset.htm
reward points if helpful
regards,
ujjwal kumar

False Monitoring Message in SXMB_MONI

Similar Messages

Maybe you are looking for