False "new mail" indicator
Upgraded to Mavericks, now I'm getting a false "new mail" indicator on both my dock and Mac Mail program. It's only on one on of my three email accounts, and I've already tried a smart mailbox to search for any unread emails. Had this happen before on my MacBook Pro, no one at the Genius Bar could figure it out. Now I'm on my MacBook Air, less than a year old, it's making me NUTS!
Anyone have any ideas how to proceed?
UPDATED: the Mavericks 1.0 update just debugged the Gmail problem, so all good. Grateful to the nerds in Cupertino for handling their business.
Similar Messages
-
False New Mail Indicator in Dock
Hello,
This morning when I launched Mail it showed 3 new messages. Looking to my Mail folders I saw none. Sifting through my Mail folders I found 2 messages from back in March that had become unread. The 3rd mysterious new message is still un found.
Any ideas please.Create a smart mailbox in Mail > Mailbox > New smart mailbox...
That should point the the unread messages.
Regards,
Captfred -
New Mail Indicator in Title Bar
Anyone else think that a new mail indicator in the title bar (e.g. next to the battery indicator) would be a good idea? Is it even technically possible? I don't like audio mail notifications but I'd like to see if there was a new mail waiting while I'm browsing or suchlike.
Well, that's true though if you put the mail app in your tray on the bottom you can see it from all screens. But you have to exit an app to see it. What you're talking about is a good idea. When multitasking comes out this summer, maybe someone will write a mail notification app that operates in the background. Feed it back to Apple in the Feedback forum so they'll hear about it as they probably won't from here.
-
New mail indicator won't go away
My mail icon continuously says I have 1 new mail even though I don't -- once I access my inbox it says I have no new messages, but the icon won't go away.
Also, I have BCC turned off, but my gmail is still BCCing me all of my sent messages. How can I make it stop?Reset your phone(hold down home and sleep/wake buttons until the Apple logo comes up)
As for Gmail go to Settings>Mail>Select the Gmail account>Advanced> and make sure that in the Mailbox Behaviors the Sent Mailbox is set to <Sent Messages> -
Whenever I go to the sent or junk mail boxes, I get a red dot indicating I have new incoming mail when there is none.
In case it matters, I'm connected to two different mail servers.Hi Al,
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot. -
With IOS 6 the new mail indicator on the home screen defaults to the VIP mailbox. Is there a way to change it to show how many new messages are in the inbox?
I'm having the exact same issues here too, ever since upgrading to iOS4, before then it was working just fine. I have a hosted IMAP account from gandi.net as they are my domain registrar and host, so to confirm what I've been reading, it's definitely not an issue with a particular mail service, but the Mail app itself. Accessing it from Mail on my Macbook (10.6.4) works just fine, not one issue. I do find that restarting my iPod Touch (2nd generation) does seem to resolve the issue, or rather get the messages all caught up, but the issue comes right back again with new messages. I hope the next update expected from Apple this week or next will resolve the issue.
-
Email folder not showing "new mail" alert
I have several email folders on my blackberry. When I recieve an email it only shows up on the "messages" folder. My previous BB would show the new mail indicator in both "Messages" folder and the specific email folder it belonged in. If I go to the specific folder, the email is inside, it just will not alert me to this folder. Hope this makes sense.
Currently I have 4 specific email folders, a text folder, and a messages folder.
How can I fix this?
I have an 8310 that was just replaced by another 8310 thru insurance coverage.
Thank you very much!Not sure if this will work but try going into your email and hit bb menu key and choose message alerts and make sure you have a notification set for each one
Hope it helps
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue -
starting today, the mail icon in my doc has a red circle with the number 1. I do not have any new unread mail. I have check in my inbox, sent mail, trash, and junk mailboxes. I can't seem to get rid of the red circle. Any ideas?
I had the same problem, except that Mail was constantly adding 9 to the number of new mail count. Neither reindexing nor rebuilding the mailboxes solved the problem. Finally, I went into Mail preferences, and on the general tab, I set the new mail indicator option to "inbox only" and it's working fine now. Hope this helps.
-
Mail button erroneously indicating new mail
My inbox is indicating there is new mail when in fact there is not. There is also a button on the dock icon indicating new mail.
I have quit the program and restarted and it did not go away. Any suggestions?I recall I have a "ghost" email issue a while back. Mail's dock icon would say I had 2 unread mails, but when I'd look at the Inbox there was nothing to be seen, and the count mysterious went to zero .. only to go back to 2 some time later.
I finally discovered that there were two messages which had been originated by my ISP's mail system administrator, but which were missing some headers or were corrupt in some other way. I could see them when I used the Web Mail system provided by my ISP, but they weren't visible in Mail. While in the Web Mail, I deleted these messages and the problem went away.
So, if you have some odd issues with Mail, it's always worth using your ISP's Web Mail system to see if there's something unusual in your Inbox.
Bob -
New mail not being indicated in nested folders
I have just noticed that new mail does not get indicated unless the folder in which it has been stored is opened. As I have a lot of mail folders, this isn't practical. It worked fine before I installed Leopard (said installation also rendering my computer unusable for about 6 hours incidentally until I could decipher command line instructions to rescue it), but now I have no way of knowing if I have new mail without opening every single folder I have.
Actually I didn't notice, I had a phone call from an irate client wanting to know why I hadn't responded to her email of 6 hours previous. On accessing her folder I found the emails, then opened up all the other folders to discover I had new mail all over the place, this instigating a pretty hectic period where I tried to cram a whole days email replying into 30 seconds.
So is this a bug, a preference setting or any idea what?
I must say that so far Leopard seem to be the most successful bug introduction Apple has ever pulled off. Maybe only 8.6 was more spectacular, what with it's hard disc destruction mode.
Bah!!!Glad to see that someone else has the same problem as me!!
I only have about 10 different folders with rules attached so I've taken to clicking on each folder when checking for new mail.
It's incredibly annoying though and is again a problem only since I upgraded to Leopard.
Anyone got any ideas or insight?!
As Sean put it perfectly - 'Bah'!! -
Mac Mail 6 is missing the "spinning wheel" indicator when checking for new mail
Before updating to Maountain Lion, when cheking for new mail in Mail, there was a little indicator ("spinning wheel") next to the Inbox to confirm it was actually working.
Since updating to Mountain Lion, the indicator isn't there. It's not that much of a big deal if it doesn't exist anymore, but it was good to have, and if it's just a setting I need to turn back on, then that would be cool, if I could find itfor who is "expected behavior"?????, if you have 6 mails account with different domain or private domains this is NOT an expected behavior... why? this missing indicator work to know if your site or email client is up or down or slow, ok maybe a lot of people don't use this but, don't take desicions like microsoft!!!... looks like some ex-employee from microsoft has a very cool job on apple right now
i don't know who did "This solved my questionRe: Mac Mail 6 is missing the "spinning wheel" indicator when checking for new mail"
you need to remove that... Take another bite to the apple an work on that!!! -
How can I create a new mail custom form shortcut ?
Hello everyone !
It's been three hard day of searching for such a simple question:
How can I add a button to Outlook's ribbon that select a new pre-define form to send ?
I already have the button but I miss an instruction like that:
Create new mail with the form located here
Thank you in advance for helping :D
(And sorry if there is a mistake, English is not my native language)Hello Dark,
private void CreateMailItem()
Outlook.MailItem mailItem = (Outlook.MailItem)
this.Application.CreateItem(Outlook.OlItemType.olMailItem);
mailItem.Subject = "This is the subject";
mailItem.To = "[email protected]";
mailItem.Body = "This is the message.";
mailItem.Importance = Outlook.OlImportance.olImportanceLow;
mailItem.Display(false);
Outlook forms are associated with items based on the message class values. To get a specific inspector window displayed you need to create an Outlook with the associated message class.
VSTO provides two different ways for customizing the Fluent UI:
1. Using the ribbon designer: Walkthrough: Creating a Custom Tab by Using the Ribbon Designer .
2. A raw XML markup: Walkthrough: Creating a Custom Tab by Using Ribbon XML -
2.2 fixed fetching for me, but 'new mail' sound/vibration remains an issue.
I'm interested in finding out how many of you have found that mail fetching is now perfectly reliable but you're still not getting the 'new mail' alert...
I did a full restore and found that when the mail account was first reinstated, it chimed/vibrated correctly. However, subsequent mail deliveries are silent.
So restoring, unfortunately, still doesn't make it work. The fact that the 'new mail' slider is set to 'on' and 'vibrate' doesn't make it work.
Anyone else? 2.2.1, maybe? Anyway, we're making progress, so I'm really happy about that!AndreTheGeek:
Yep, same here. I held off celebrating, but fetching/notifications worked great on Friday and Saturday, then Sunday afternoon, I noticed mail showing up on my phone without audible notifications. Turned it off, back on, no dice. Hard reset, no luck. Reset the network settings, and it fired back up again. Great!
This morning when I woke up, it had quit again, but seemingly due to a different problem. This time fetching was hung - when I would go to a particular mail account (I have 3: one push, one IMAP, one POP) the phone show "connecting" with the spinning wheel. Then it would show "updated" but the date was from last night, and the data transmitting indicator up at the top (to the right of the 3g) would keep on spinning forever. Turning off/on and hard resetting did not fix, resetting the network settings fixed it (again). So, give it a shot, just remember that when you do, it turns wifi back on, so you will need to turn that off if you do not want it chewing up your battery.
In the end, I would not worry too much - I am sure that this is just an isolated occurrence affecting only and handful of users. No doubt Apple is secretly working on a fix that they will release in two months, just as soon as the upgrade the iTunes store to allow you to upload custom photos of your neighborhood for use in streetview. The best part is this will only cost you 99 cents per upload.
I have reported this problem to http://www.apple.com/feedback/iphone.html anybody else having this problem should as well. -
STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.
I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionIntervalHi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK? -
Open a new mail item in Lotus notes with all names from table view..
HI
the requirement is like this .. There is a table view with checkboxes..
Now user will select the particular checkboxes and one mail should be created in Lotus Notes with all the user ids selected.
How do i achieve
1) Selecttion of either all ( Select ALl/deselect all ) or some users funtionality in table view
2) Opening a new mail item with all users selected.Hi Raja
The problem is this
I have 2 buttons mail to Selected and mail to all .
<htmlb:button id = "b_mailtosel"
text = "Mail to Selected"
onClick = "onInputProcessing(b_mailtosel)" />
<htmlb:button id = "b_mailtoall"
text = "Mail to all"
onClick = "onInputProcessing(b_mailtoall)" />
Table view below is having this value..
<htmlb:tableView id = "tab1_list"
table = "<%= i_list %>"
footerVisible = "false"
selectionMode = "MULTISELECT"
design = "ALTERNATING"
emptyTableText = "No data available"
width = "100%"
>
OninPut processing
WHEN 'b_mailtosel'.
application->s_flag = '1'.
l_tv ?= cl_htmlb_manager=>get_data( request = request
name = 'tableView'
id = 'tab1_list' ).
IF NOT l_tv IS INITIAL.
table_event = l_tv->data.
IF NOT table_event->PREVSELECTEDROWINDEXTABLE IS INITIAL.
i_selected_mail = table_event->PREVSELECTEDROWKEYTABLE.
ENDIF.
ENDIF.
table_event->PREVSELECTEDROWKEYTABLE is blank since there is no key column defined in the Tableview ( since this combination doesnt work with select all ) .
WHEN 'b_mailtoall'.
cl_htmlb_manager=>check_tableview_all_rows(
rowcount = rowcount
request = request
id = 'tab1_list'
check = 'X'
application->s_flag = '1'.
l_tv1 ?= cl_htmlb_manager=>get_data( request = request
name = 'tableView'
id = 'tab1_list' ).
IF NOT l_tv1 IS INITIAL.
table_event1 = l_tv1->data.
IF NOT table_event1->PREVSELECTEDROWINDEXTABLE IS INITIAL.
i_selected_mail = table_event1->PREVSELECTEDROWKEYTABLE.
ENDIF.
ENDIF.
NO DATA is coming in Select all too..
HOw do i frame my code to atleast get the values...
Maybe you are looking for
-
HP PhotoSmart 5520 - Airport Extreme - Airprint - "No AirPrint Printers Found"
Dear HP I used to be unable to print from my iPad Air, iPad Mini, iPhone 5c or iPhone 5 to my PhotoSmart 5520 using AirPrint. Not anymore. I can: 1. See and print from my Mac Pro and iMac 2. See and print from my brother's Android Nexus 4 3. See and
-
Please provide the steps to restore contacts to my Macbook 2.26 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3, OS X 10.9.5. I have back up G mini drive and iPhone 4. Thanks, Tracy
-
CPM-BSC - Java Application Error in BI 7.0. - CauseEffectApplet Not found
We have recently migrated from BW 3.5 to BI 7.0. We are making tests in our test system and we found an error executing a BSC via web. Trying to execute the balanced scorecard via web, with the UMB_LAUNCHPAD_WEB transaction, when you select an scorec
-
Library/startupitems/login server error messgae
Sorry if this is the wrong place to post this but I can't start a topic in an other forum. There is no "POST NEW TOPIC" at the top. I am gettin an error message "library/startupitems/login server security settings arre wrong" I get three choices. LAT
-
Esp when opening up files and when saving multiple files to .jpg