Family Members Subtype 2

Dear Experts.
I have the following issue:
When I update or create the subtype 2 in the service of Family Members in the portal ESS, the system replace the register that have the infotype for the employee.
My test is create a new child for the employee, but the system replace the register of the first child. And not created a new register for the new child without replace the register taht exist in the infotype.
V_T7XSSPERSUBTYP
Infotype: 0021
Subtype: 2 (Child)
Use Case: A3.
V_T591A
Infotype: 0021
Subtype: 2 (Child)
Time constraint : 2
Object identification permitted for subtype: The indicator is marked.
What is the cause of this?
Thank in advance for your help.
Regards

Dear Siddharth,
My configurations is the following:
V_T591A
Infotype        :0021
Subtype         :2
Name            :Child
Time constraint : 2
ObjIDallw       : X "The indicator all. objid is set.
What Time constraint need use for that the system work fine and not show the message of error when I want use other Use Case
V_T7XSSPERSUBTYP
Country         : 10
Infotype        : 0021
Subtype         : 2
Use Case        : B3.
You says the following:
For
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
zeitb = '3'
But in the table V_T591A for the infotype 0021 subtype 2, I have the zeitb with value 2, And in the table V_T7XSSPERSUBTYP the system not allow use the usecase A4 or B4 for hide the button delete.
When I press the button save the system show the message:
"There is an inconsistency in the usecase maintained for this record."
Regards

Similar Messages

Family Members Overview Screen

Hello :
We happen to use ESS family member iview for 'Emergency Contact'. When we implemented this, we only want 1 emergency contact. Therefore, in 'Family Members' overview iview, we somehow turned off repeating block (i.e. if multiple records coming back (more than 1 child), each record is displayed in a block). Unfortunately, I don't remember what we did.
Now, we need to have these blocks turned back on (as an ee can have several emergency contacts). We already config the proper use-case(T7XSSPERSUBTYPE) for this infotype on SAP back-end. However, I don't seem to find where to turn the repeating blocks back on on portal site. I thought it would be in 'Preview', but don't see other repeating blocks in there.
This causes ESS to error out when going to this iview, and there're more than 1 records to display).
Appreciate any help on this.
Rgds.

Hi,
in the table V_T7XSSPERSUBTYP
Try to give following entries
Cotunry
08
infotype
0006
Subtype
0
Use case
A1 or A2
Note : Please use your project specific country code .
and try
also you need to check the time contrarians for the same
by following was you can do it.
Go to SE16 and give the table name u201CT591Au201D
In the selection screen give INFTY = 0009 and Execute ( F8)
And check the time contrarian what is set for the subtype.
At the same table you can set the time contrarians also.

Family members dependent scenario

Hi all
i have got a problem.
The problem is related to IT 21.
Actually one of our application fetches the family dependents data from the IT21.
We need that if a daughter gets married there should be some meachanism or some flag ..that can tell the system that now the girl has married and she will be excluded from the family members.
How can i do this.
regards
nikki

Hi for your reference
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the Employee Infotype radio button.
4) Select the PS Structure Infotype.
5) Click on Create A separate table maintenance window appears
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on All push button. It takes a few moments.
10) Click on Technical Characteristics. Infotype list screen appears
11) Click on Change(pencil) button
12) Select your Infotype and click on Detail (magnifying glass) button
13) Give T591A as subtype table
14) Give T591S as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on Infotype Characteristics Infotype list screen appears
18) Click on Change (pencil) button
19) Click on New Entries
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypes infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement
25) In the PM01 initial screenSelect Screen radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select Layout Editor and click Change.
27) Screen default layout appearshere you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Dont forget to Activate at every level)

Question on Personalization - Family members and dependants iView

Hello experts,
I have a requirement to hide a fiew fields on Family members and dependants.
For example : I have to hide date of birth, gender etc.
Now, I was successful to hide the fields using CTRL+Right click.
But, the problem is, this kind of hides from all screens.
Like, the need is to hide the fields from Spouse entry, but when I change that in Edit spouse details screen, it hides from Edit Child entry screen as well.
How to achieve personalization such that the entry is removed from only one screen and not all?
Regards
Avik

Hello Avik
As siddarath told it is correct. You can't hide subtype level in one application using CTRL+Right Click.
You can do wrirte piece of code in EDIT and Review screen of WDModifyView method.
Get subtype value put condition.
example :
if ("1".equals (getSubtypeValue))
Create context Attribute of type Visible : set the value based on the condition bind UI element to context attributes.
This is only way you can do it
BR
SS

ESS Family Members

Hi
I got a problem in ESS Family members / dependents where the Header of the Subtype does not appear in the view. It is a funny situation where we find the 3rd record always gets this problem.
I raised a OSS with SAP they are still looking at our system but have not got a reply for very long time.
Please tell me if anyone has encountered/resolved this problem
regards
Pravin

Hi
You see when i display the family members & dependents for each record like Father Mother Brother Sister there is a heading of the subtype and under this heading the details of the record appears like this example
Spouse
Last Name: Bhattacherjee
Name at Birth:
First Name: sanchit
Date of Birth: 4/1/1982
Father
Last Name: Bhattacherjee
Name at Birth:
First Name: Subir Kumar
Date of Birth: 11/20/1950
<----
here there is no heading
Last Name: Bhattacherjee
Name at Birth:
First Name: Mother
Date of Birth: 1/1/1955
Brother
karthika
Last Name: Bhattacherjee
Name at
You see I have noticed for every 3rd record the subtype heading does not appear
regards
Pravin

Service Family Members

Dear Experts.
I have the following doubt if This is posible:
I want that in the service of Family Members the system show only the last register in the ESS that have the backend for the subtype 1.
In this moment with the following image, the system in the backend have two register in the infotype 0021 for the subtype 1, and the standard service display the two register for edit. I want that the portal only display the last register.
[Family Member|http://www.freeimagehosting.net/uploads/2b438c9246.jpg]
Is posible this?
Thank a lot in advance
Regards

This is my configurations for the two tables:
V_T591A:
Subtype :1
Name : Sspouse
Time Constraint 2
V_T7XSSPERSUBTYP
Country:38
Infotype:0021
Subtype:1
Use Case:A2.
Regards

ESS Family Members iView - Change UI Elements

Hi guys,
On ESS Family Members iview, the subtypes (i.e. family members) appear as buttons on the page - 1 button for each family subtype. I'm trying to change it from family subtypes appearing as buttons to values in a dropdown list. However, when i do so, it keeps hitting error:
com.sap.tc.webdynpro.progmodel.context.ContextException: DataNodeInfo(BizCardsView): unknown child node
What I did was:
- Modify FcPersInfo.CreateOverview method
- comment off the buttons creation
- basically replace the code with:
IWDDropDownByIndex DDI = (IWDDropDownByIndex) view.createElement(IWDDropDownByIndex.class, "dd");
DDI.bindTexts(wdGetContext().nodeSubtypes_Info().getNodeInfo().getAttribute("Stext"));
container.addChild(DDI);
Has anyone met this error b4 and can share your resolution pls? Thank you.

K, issue solved. This is due to context node not existing in the view.
However, my context node contains the keys such as 1,2,3. How can i get it to display the subtype word itself, that the key map to? such as Child, Spouse,...

Duplicate labels in Personal Information- Family Members/Dependants

Hi Experts ,
We have implemenated the EHP4 and now we are getting the below errors in Family Members/Dependants in Detail page :
Parent
Parent <Duplicate SubType Text>
Family Data
Last Name
First Name
Family Data <Wrong Header Text as the below attributes belong to ID Information>
ID Number
Tax ID
ID Information <Wrong Header Text as below attributes belong to Address>
House No
Please help
Regards,
Ravi

Hi Ravi,
Were there any modifications/customizations done to the frontend FAM WD app?
Check the code and see if you are able to see the wrong header texts in the Edit view and in the Review view. Also check the corresponding language xlf files of Edit and Review views.
In case if you see wrong headings in the code or in xlf files, check with your team if they have done any changes and apply the fix. In case if your team has not made those changes then itu2019s a SAP defect, raise the ticket to the SAP and they will fix it.
In case if you donu2019t see wrong header in the code then, some one might have done changes from personalization.
From Content Admin, open the iView. Do the preview of iView and then use Ctrl + Right mouse click on the Edit button to display the web Dynpro personalization. Make the required changes.
Even if its SAP code defect, you can apply the fix from personalization. (Apply the fix and also raise the ticket to SAP)
Regards
Yugandhar Reddy

Why two "Define possible family members" config options?

There are two "Define possible familiy members" options when following this path:
IMG > Personnel Management > Personnel Administration > Personal Data > Family > Define possible family members.
I realize that when you click on the second one you're required to choose between the activities of "Infosubtype characteristic IT0021" or "...IT0138", but the IT0021 screen looks exactly the same as the first "Define possible..." link. The IT0138 screen looks slightly different. Can you explain what's going on? Is it better to change one "Define possible family members" link over the other?
Thanks!

Hi Patterson,
(First One) with Object Identification Permited for subtype
Object identification permitted for subtype
Using the indicator all objid (Object identification allowed for subtype)you can control whether the field Object ID (Object identification) can be used for a subtype.
If the indicator all. objid is set, then the Object ID field can be used. In this case you can create data records with the same infotype, subtype, blocking indicator, validity start date and end date. These records are differentiated by their object identification.
If the indicator all. objid is not set, you cannot use the Object ID field.
Example
The indicator is set for the "child" subtype (2) in the Family/ Related Person (0021) infotype. In this case theObject ID relates to the child number. The child number relates to the number of children - in this way, records with different keys are generated.
Best wishes
vellore sekar

How do multiple family members use iTunes.? One account or multiple?

How do multiple family members use iTunes. One account right now but apps gets added to all devices and iTunes messages go to all devices. Can multiple accounts be setup and still have ability to share purchased items?

Hey Ajtt!
I have an article for you that can help inform you about using Apple IDs in a variety of ways:
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using one Apple ID for iCloud and a different Apple ID for Store Purchases
You can use different Apple IDs for iCloud and Store purchases and still get all of the benefits of iCloud. Just follow these steps:
iPhone, iPad, or iPod touch:
When you first set up your device with iOS 5 or later, enter the Apple ID you want to use with iCloud. If you skipped the setup assistant, sign in to Settings > iCloud and enter the Apple ID you’d like to use with iCloud.
In Settings > iTunes and App Stores, sign in with the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match). You may need to sign out first to change the Apple ID.
Mac:
Enter the Apple ID you want to use for iCloud in Apple () menu > System Preferences > iCloud.
Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in Store > Sign In. In iTunes 11, you can also click iTunes Store > Quick Links: Account.
PC (Windows 8):
Enter the Apple ID you want to use for iCloud in the Control Panel. To access the iCloud Control Panel, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes. In iTunes 10, select Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
PC (Windows 7 and Vista):
Enter the Apple ID you want to use for iCloud in Control Panel > Network and Internet > iCloud.
Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes 10 in Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
Note: Once a device or computer is associated with your Apple ID for your iTunes Store account, you cannot associate that device or computer with another Apple ID for 90 days. Learn more about associating a device or computer to your Apple ID.
Thanks for using the Apple Support Communities!
Cheers,
Braden

Multiple iMacs, multiple family members -- so common, yet so hard?

I have a media-loving family of four. We're an Apple family. One shuffle, two touches, two iPhones (coming Friday), three AppleTVs, and two iMacs. We love them all.
I HATE the pain it seems to be to keep my media in synch, however.
It's not so hard keeping my account in synch with the AppleTVs and my Touch. Where I get into trouble is in wanting to allow my family members to leverage MY library as a basis for theirs. Moving and copying music and movies from my library to my daughter's, for example, just seems a lot harder than it should be. As does keeping my library on my upstairs iMac in synch with my downstairs iMac.
I've been unsuccessful in attempts to use iTunes Ranger.
What's the best way to move between accounts on an iMac?
And, is there an easy way to keep two iMac iTunes libraries in synch?
Also -- can anyone point me to some really good documentation that explains the finer points of media storage on a Mac. Everything Apple provides (unless I am missing the secret detailed manual with all of the crazy tips) seems so high level...
Many thanks in advance. Appreciate the support.
Jim

thejester77 wrote:
Also, latest news shows that Android only made $22million in revenues last year, and spend $20 billion acquiring Motorola. So I don't see Andriod being able to do much in the year 2012 to ramp things up to compete against Windows Phone 7/Nokia and Apple. What news are you reading? Android is not a company but a phone operating system. GOOGLE acquired Motorola, not Android. GOOGLE's 2011 revenues were 37.9 billion, NOT 22 million. Google acquired Motorola for 12.5 billion, NOT 20 billion.
Also, here's another suggestion... Do like AT&T has done and give users a early termination fee to get out of there contracts. I believe they charge $35 dollars or something higher if your not satisified and want to terminate your contract early.
Since you don't want to support or offer any more Windows Phone 7, why keep us as unhappy customers. Give us an option to pay a early termination fee and leave!!! Again, where are you getting this information? The AT&T ETF is $325 less $10 for each month of your contract which has been completed. It is NOT $35. Verizon has a similar, although slightly higher ETF of $350 less $10 for each month of your contract which has been completed.
Yes, we can hear you, but you are not making any sense!

Multiple Family Members using a MAC

Hello,
Can someone give me an overview of how family members all use 1 MAC and ICloud so that each person gets their own "stuff"? For example, I would like to get my calendar, my songs, my contacts, my apps synced with my devices--iphone and ipad. And my wife would like her own stuff synced. Seems pretty fundamental but I could not find any info from Apple. Is there a way to do this if each person has a separate Apple ID? What are other people doing?
Thanks,
Matt

If each person has a separate Apple ID, as you stated, it should be no problem. However, i'm not sure exactly how you have your computer set up, if you have separate User accounts set up, or if you just use one User account.
You should create a separate User account for each family member. Decide if you want those User accounts to be Administrator accounts, or if they are Standard accounts, and set your Parental Controls as desired. You can also find the Parental Controls settings in the System Preferences as well.
So once each User account is established, you can copy over only the information for them (i.e. contacts, iCal events, iTunes music, etc).
Set up to sync their iOS devices with iTunes with their information on their User accounts, with their own separate Apple IDs, and everything should work smoothly.

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Family Members Subtype 2

Similar Messages

Maybe you are looking for