Famous error 404 in URL of QuickTime
Have looked at all previous questions on this issue but can't find an answer.
I have an mv4 file.
a) If viewed via File / Open - the file is on my hard disk, and the video displays without any problem
b) If viewed via File / URL - I get error 404 "an unknown error occurred". My mv4 file has been uploaded to our server and I am sure the path is correct
I am now desparate as I cannot find an answer to this problem. Thank you very much for help.
Thanks for helping me. I have done that by entering
http://www.netlearn-ch.com/fr/podcasts/02EB.m4v
The above URL is pointing to the m4v file on our server. I get the 404 error.
If I do simply File / Open in QuickTime and open the above m4v file stored on my hard drive, it works fine, showing that it is not a video problem per se.
There is something basic I obviously don't get. Thanks anyway for your help. Kind regards, Doris, Geneva, Switzerland
Similar Messages
-
How can I fix error 404 no URL I deleated it ! Help!
I downloaded firefox and everything was fine . I wanted to load Spockholm to improve my Mafia ward game. While trying to install SH i was fumbeling aroung and erounisly eraces the URL, when I called firefox Brouser up agen the screen was blank with a message there was no URL error 404. Im a senior citizen with little experance. Would appreciate any and all help. ty The URL you have requested could not be found. (404)
You get this error when trying to buy/download items from an itunes store that is not in the same country as your device is currently in.
-
Error 47: invalid url AND QUICKTIME PRO
I'M WANTING TO WATCH OLD STREAMING BROADCASTS FROM OHIO WESLEYAN WEBSITE. UPGRADED TO QUICKTIME PRO LAST NIGHT. CAN'T GET THESE ARCHIVED EVENTS TO OPEN IN PRO(WANT TO WATCH A FULL SCREEN). I PASTE THE URL ON THE PRO PLAYER AND GET THE INVALID URL MESSAGE. ALSO WONDERING IF I CAN WATCH LIVE STREAM OF FOOTBALL GAME TODAY OR IF THE INVALID URL WILL POP UP? WONDERING WHY THE QUICKTIME WHICH OPENS UP THE ARCHIVED EVENTS ISN'T IN SYNCH WITH MY DOWNLOAD
Turn off caps lock.
I couldn't get the "archives" pages to load any QuickTime content but was able to view the page source code to find the URL.
rtsp://streaming.owu.edu/070210_mbb.mov
To open any file directly in the Player requires a "direct" link to the file (not the Web page that holds it). -
Err 404 The URL could not be found on the server
I attempted to purchase a song and got this error message, error 404 the URL could not be found on the server. Now every time I download any song, it attempts to find the song and gives me the same error message. I don't care if I lose the song. I would just like to make it stop trying to download it.
Any ideas?I've the same problem, and I've reported for the problem, but I received an non-reply, such as "do you have a good internet connection?", etc...
When I start iTunes, it ask me for my iTunes Store password, then it try to download the missing file I have buyed, but always with the same error message: There was a problem downloading "Fool to Cry / Sucking In the Seventies / The Rolling Stones". The URL "http://a438.phobos.apple.com/r10/Music/y1969/m12/d31/s06.dwrnogas.a.mp4" could not be found on the server. -
Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites -
I have a MacBook Air OS X, Version 10.7.5 and when open my Apple Calendar, I get the alert "encountered HTTP error 404. Make sure the URL is correct. Anyone? The error message comes very often but my calendar DOES still work.
I went to System Preferences; Mail, Contacts, Calendars; Under my mail address I unchecked "Calendars and Reminders" then rebooted the system. When it restarted I went back and checked "Calendars and Reminders" again and now it is working again.
-
Error 404 when accessing website by traffic manger URL
So here's the case...
I have 2 azure websites that are available by custom domains let's say eu.somecustomdomainhere.com and us.somecustomdomainhere.com.
Also there is a traffic manager say myglobal.trafficmanager.net with custom domain www.somecustomdomainhere.com
Load balancing method: Performance
Once I add 2 endpoints using custom URLs on open custom or .trafficmanager.net URL I get Error 404 blue page. When I run NSLOOKUP I get records that point to the right endpoints and IP. When I try to open IP in webbrowser I get the sam 404 error page.
Here's an interesting part: when I add custom domain to one of the websties in management portal that corresponds to traffic manager URL or www.somecustomdomainhere.com in azure portal it start redirecting me to that on website. I tried to add the same custom
domain to the second website but it says that custom domain is already assigned to another website.
So I removed trafficmanager.net and www.somecustomdomainhere.com records from the website and it get 404 error again.
Telnet to traffic manager connects on port 80.
I waited for 24 hours just in case DNS record is cached by no luck.
So the question is: How do I work around this and is it a known issue or for how long should I wait?According to this, endpoints from different subscriptions can be added:
Deploy your Azure cloud services, Azure websites, or other endpoints to your production environment. When you create a Traffic Manager profile, it must be associated with a subscription. You then add endpoints for cloud services and Standard
tier websites in production that are part of the same subscription. If an endpoint is in staging and is not in an Azure production environment or is not in the same subscription, it can be added as an external endpoint. For more information
about cloud services, see
Cloud Services. For more information about websites, see
Websites.
Frank -
Pacman -S usb_modeswitch URL returned error: 404
Hi, I have a raspberrypi board with archlinux
I'm trying to install usb_modeswitch with no success
[root@alarmpi ~]# pacman -Ss usb_modeswitch
community/usb_modeswitch 1.2.3-1
Activating switchable USB devices on Linux.
First search for package ok
Than resource not found...
[root@alarmpi ~]# pacman -S usb_modeswitch
resolving dependencies...
looking for inter-conflicts...
Targets (2): tcl-8.5.11-1 usb_modeswitch-1.2.3-1
Total Download Size: 0.04 MiB
Total Installed Size: 6.80 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from community...
error: failed retrieving file 'usb_modeswitch-1.2.3-1-arm.pkg.tar.xz' from mirror.archlinuxarm.org : The requested URL returned error: 404
warning: failed to retrieve some files from community
error: failed to commit transaction (download library error)
Errors occurred, no packages were upgraded.
Any thing wrong?
RegardsAlways use -Suy when installing packages, the current version is 1.2.3-2
Also we do not support archlinux-arm, it is an unofficial port and you should use their forum/irc channel.
Last edited by Mr.Elendig (2012-07-23 17:58:16) -
Exchange 2013 RPC URL shows Error 404 Page Not Found
Hi,
I have been told by Barracuda Support to verify my Exchange 2013 RPC url is working correctly using the following address in a Web Browser:
https://RoH server address/rpc
When I hit this URL I input my credentials and get a Error 404 - Page Not Found.
I dont have any issues with Outlook Anywhere and clients are working fine. The tests come from this article and I am wondering if they are still valid for Exchange 2013 so need some help:
https://techlib.barracuda.com/BMA/EnableRoH
Does anyone else get the 404 error when they try the RPC virtual directory? If I got rpc/rpcproxy.dll that works fine and no issues.
We have Outlook Anywhere configured for NTLM authentication so maybe this is an issue and should be Basic?I did some digging in the CAS RPC logs and I found this connection attempt:
<snip>
2014-06-18T15:22:40.902Z,CAS-SERVER,RpcHttp,"S:Stage=EndRequest;S:UserName=domain\admin;S:OutlookSessionId=""{1A731432-5548-402F-892A-C9FE489BB78D}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.domain.local:593;S:RequestId=7b1e355e-6448-4ed4-8112-8ab13d88a76f;S:ClientIp=192.168.0.17"
</snip>
As you can see the 404 Not Found is for the request to /rpc. I am wondering if maybe this has changed in Exchange 2013 SP1? Or have I got a bigger issue here? -
Quicktime: "Error 47: Invalid Url. ()"
When one is trying to watch movie trailers on http://trailers.apple.com/ and choosing 720p or 1080p one gets a popup with -> "Error 47: Invalid URL. ()"
This problem started some time in june and I am not alone to have this problem.
But so far there is no solution to it.
Tried to reinstall quicktime and even tried to reinstall the os but no luck so far.
Os: Windows 7 X64 Sp1
Browser: Chrome (even tried Internet Explorer but same problem)maybe this helps,
if you're on windows 7 like me, run quicktime in xp compatibility
to do this: got to C:\Program Files\QuickTime (or the location you installed QT)
right click on quicktimeplayer.exe and in the compatibility tab checkmark ''run in compatibility mode'' or something (sorry my windows is in dutch) and choose xp sp3
hope this helps, it fixed my problem, I was getting Error 47:0 on HD trailers.
but now the QT player opens and the trailer plays in full HD -
Keep getting this error message on my calendar "HTTP error 404. Make sure the URL is correct.". Any idea how to fix it?
I started getting this at the same time. Must be something on their end. It's all still working though which is weird.
-
The URL https://calendar.google.com/calendar/dav/[email protected]/user///calendar.google.com/calendar/dav/[email protected]/user/ encountered HTTP error 404. Make sure the URL is correct. How do I correct this issue so that I no longer see this message? Your help will be greatly appreciated.
I simply un checked calendar in my account settings and closed ical.
I checked it again, and opened ical.
Thanks for the tip Linc Davis! but it works without deleting the google account completely. this was pretty straighforward and fast. -
"Error 404: file not found"displayed when trying to run a process on server
Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AMsorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu -
Error 404 -- Not Found, when a Servlet is invoked from browser
Obviously, I have not been able to configure my WebLogic Server 5.1.0 to run
even the simplest servlet.
I painstakenly went through all the steps that are listed in the WebLogic
Server 5.1.0 documentation on the Web to enable servlets, but obviously, I
have missed a step somewhere.
I have modified the weblogic.properties file as per all the instrustions,
but the server simply won't recognize any servlets, not even the SqlServlet
that came with the server as an example.
It would require more than 1 exchange of posts to resolve it for me, and I
am wondering if one of you is willing to work with me on this until I have
managed to configure the server to make a servlet work on it.
The server does function as a Web server as I can run the index.html
document by entering the URL: http://localhost:7001/index.html
I am pasting the contents of weblogic.properties file below to get the
person who is willing to help me started.
The machine I have is a Pentium III with Windows 2000 Professional on it.
It's a home machine and the WebLogic server is the freely downloadable
version. I am using it to prepare for a potential contract work.
I have managed to modify setEnv.cmd file and have managed to compile the
SqlServlet.java, which is an example servlet. Neither this particular
servlet nor a HelloWorld type of very basic servlet I have written are
recognized by the server.
As you can see from my weblogic.properties file (pasted at the end of this
post), the SqlServlet has been registered. I have also uncommented the lines
to allow for the following type of URL:
http://localhost:7001/servlet/myServlet
Thanks!
Anjum Jaleel
CONTENTS OF MY weblogic.properties file
# THE WEBLOGIC PROPERTIES FILE
# This file, which conforms to the java.util.Properties file
# definition, configures your WebLogic products. You cannot run
# WebLogic Server without setting required configuration properties in this
# file. Required properties are marked and appear first in the file.
# Details on each entry and important information about configuration
# and security are documented on our website. Please go to:
# http://www.weblogic.com/docs51/admindocs/properties.html
# for full instructions on how to edit this file.
# You do not need to include properties in this file unless you want to
# change the default, embedded property. Some properties on the
# AdminProps page are not listed here because the default property
# is being used. You can change the default by adding the property and
# its value to this file.
# You cannot set weblogic.system.home in this file, since the WebLogic
Server
# must know where home is in order to retrieve this file. You can
# change WebLogic home on the command line when you start the
# WebLogic Server.
# CLUSTER USERS: Note that the (shared) per-cluster properties file should
# contain most all of the properties in this file. The only properties
# that potentially belong in a per-server properties file for a server
# running in a cluster are the registration (startup class) of pinned
# RMI objects, and a few tuning properties that may be different for
# servers in the cluster, depending upon hardware and memory. If you use
# a per-server properties file, please REMOVE all properties except those
# that are specifically required in the per-server properties file. You
# can find specific notes on clusters by searching through this file for
# "CLUSTER USERS".
# The way this file is organized:
# Core properties (includes REQUIRED and RECOMMENDED)
# Core system properties
# Core security-related properties
# Core security-related properties for SSL
# Core HTTPD administrative properties
# Optional properties
# Administrator properties
# System properties
# System startup files
# System shutdown files
# Security-related properties for Workspaces
# Jolt for WebLogic properties
# WebLogic Enterprise Connectivity properties
# WebLogic File properties
# WebLogic JMS demo properties
# WebLogic RMI demo properties
# WebLogic EJB demo properties
# WebLogic XML demo properties
# WebLogic ZAC demo properties
# HTTPD administrative properties
# WebLogic JDBC driver properties
# WebLogic JDBC connection pool management
# WebLogic demo connection pool
# WebLogic HTTP Servlet properties
# Proxy servlet registration
# Classpath servlet registration
# File servlet registration
# ServerSideInclude servlet registration
# PageCompileServlet (used by JHTML)
# JSPServlet (used by JSP)
# ServletServlet registration
# Servlet reload properties
# Servlet ACLs
# WebLogic JSP properties
# WebLogic JHTML properties
# WebLogic RMI over IIOP properties
# User-written and demo servlet registrations
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=lovkako1
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
weblogic.httpd.enable=true
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# OPTIONAL PROPERTIES
# These properties affect the behavior of the WebLogic Server.
# You only need to set these properties if you want
# to change the default setting, which is the property shown.
# ADMINISTRATOR PROPERTIES
# Administrator properties are optional information properties,
# particularly useful for clusters.
#weblogic.administrator.location=3355 California Drive, West Hampshire, CA
94104
#weblogic.administrator.name=Joe Administrator
#weblogic.administrator.phone=1 415 555 1234
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=g:/weblogic/myserver/public_html/docs51/adminhel
p/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
#weblogic.ejb.deploy=\
# g:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# g:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# g:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# g:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# g:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# g:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# g:/weblogic/myserver/ejb_subclass.jar, \
# g:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
#weblogic.httpd.register.beanManaged=\
# examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=g:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=\
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\Problem Resolved!
I found out that I had 'http' instead of 'httpd' in the statement where I
registered my servlet, SqlServlet.
Now, I am having difficulty with hot deployment. The server is returning
error 404.
-
this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
Maybe you are looking for
-
Problem in retriving the realpath from the servlet
Hai All, I am facing problem in retriving the realpath from the servlet. I am using the following code in order to retrieve the path. String prefix = getServletContext().getRealPath("/WEB-INF/classes"); The value returned from above code is null. I a
-
Brand New Samsung s4 Won't Install Apps
My Samsung S4 (brand new last night) won't install any apps. I click install, and it highlights like it's going to, but then it does nothing.
-
Error compiling FormsGraph.jar
Hi, I am trying to compile FormsGraph.java. I am getting the following error: "method setLocalRelationalData(java.util.ArrayList) not found in class oracle.dss.graph.Graph. " The reason for this is the probably version mismatch of bigraphbean.jar. I
-
It appears that there may be a bug in the formatting of reports using PDF output on the the server. Client side output is ok. This is in 9ias. There is a similar bug I am told in 6.0.8.20. Is there a patch in the works ?
-
hi... can you please check why the heading named INTERactive not alingning with the bottom edge of the navegation menu like in the rest of the pages??? this is the link http://www.alexcas.com/interactive.html