FAN and display does not match.

hi.
i have a mega 180 and use the pc software "PC alert 4" to show info on the LCD. only thing is that it shows fanspeed between 2900rpm and 5400rpm without that i can either hear or feel any difference. and the temperature of the CPU has to go to about 75C before the FAN speeds up. and sometimes when the cpu is hot for a long time the fan gets stuck on high rpm so i have to restart my computer to slow it down.
now i wonder if a BIOS update will fix this? and how do i update my bios?

i use Arctic silver5 and i have applied thermal paste lots of times so i know how to do. it so thin that i cannot make it thinner without clearing the view to the CPU core.
and yes i have been thinking on reversing the cpu FANs and putting in an additional 60mm fan to blow over the discs and memory. but first i need a 4pin connector splitter so i can put in my other harddrive and then i need one more fan connector..
stupid MSI built in a SATA power cord when the 180 does not have SATA controller.

Similar Messages

Free space of mdf and ldf does not match with database free space

In SSMS i saw file size related properties and found below details for one database.Here values does not match with other properties. Here size of the mdf, ldf and total size matches with other values under each window. But Available free space of mdf and ldf
if added then it does not equal to Available free space shown in shrink database window and free space shown in database properties. This is true for any database. Why is it so? Please can anyone explain the logic behind this?
Under database properties:
Size: 91.31 MB
Space available:13.40 MB
Under database file properites:
mdf size:17 MB
ldf size:75 MB
under shrink database:
currently allocated size:91.31 MB
Available free space:13.40 MB
under shrink file-for data file:
currently allocated size:16.38 MB
Available free space:12.63 MB
under shrink file-for log file:
currently allocated size:74.94 MB
Available free space:55.62 MB

Hi,
Database properties and database shrink show the total (log+data) values. Others show the individual sizes, log and data separately.
I hope it helps.
Janos
There are 10 type of people. Those who understand binary and those who do not.
My Blog |
Hire Me
This does not answer my question. If you add allocated space of mdf and ldf it equals to database allocated size.But i am asking why this ldf and mdf free space together(when added 55.62+12.63 ) does not equal to database free space?

The photo displayed does not match the "film strip" shown below

Hello everyone,
I hope someone can help me.
I have started to spend some time with iPhoto, creating events an tagging, naming faces etc. trying to finally put some order against my photo collection and everything has been great until yesterday I noticed that the picture I was working on was different to the 'film strip' images below. Infact, the film strip images related to a completely different event....
Firstly, Is this something I need to worry about?
And wether it is or isn't something I need to worry about, how can I fix it?
But also, I can see some photo's in the film strip, but when I click on them they appear in the 'main' photo area as blank, in fact there is a kind of greyed out warning triangle with an exclamation mark there. Where have those photo's gone, and why can I still see them in the film strip if I have stupidly deleted them (I hope I haven't by the way!)
I've tried "Examine and repair iPhoto Library file permissions" and rebuilding the thumb prints, but neither fixes these problems.
(I've also done the close, re-open iPhoto and reboot the laptop scenarios!)
Can anyone help me please? Any, and all advice welcomed!
Thanks in anticipation
Westie
Oh - it's iPhoto 11 version 9.2.3 I'm using and I'm running it on a MacBook Pro running Max OS X 10.7.3

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Preview and print does not match image in LR

I tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly. Any ideas of what to do? R3000, LR 4.3, Win 7, NEC PA 271w, beginner level

A print that is too red / magenta is an indication for double color management, i.e. by Lr and by the printer.
Color management must be done only by one: either by the application (Lr or Photoshop) or by the printer but never by both.
When you select a printing profile in Lr that means that now Lr is doing the color management. Consequently you have to switch off colo rmanagement in the printer dialog (printer driver).
See screen shot:
Or, you can do it the other way round: Let the printer do the color management and select <Managed by Printer> in Lr.

When I try to rent a movie, it asks my password and it does not match, and I have to go to my computer

How can I make Apple TV recognize my password? Everytime I rent a movie I´m asked for my password and it tells me my password cannot be found, that I must go to Apple page to reset or change it. This happens when I´m watching TV and the lights go out. What can I do?

iTunes has many stores, in different regions. If you are trying to rent from a different location that would explain the error.

Storage Breakdown On iTunes and iPhone Do Not Match Up

I will preface this question by providing the following information:
Computer Information
Model: MacBook Pro, mid 2009, 15 inch
Capacity: 1 TB
OS: Yosemite (10.10.1)
iTunes Version: 12.0.1.26
iPhone Information
Model: iPhone 6 Plus, purchased early 1/2015
Capacity: 128 GB
OS: iOS 8.1.2
Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
As you can see:
> The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
> The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
> The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
> The total capacity for other is displayed as being a whopping 45.08 GB.
Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
Has anyone else had this problem? If so, is anyone aware of a possible solution?
Thanks.

If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal.

My itune ID does not match that of my apple the password also does not match

My itune password and ID does not match that of my apple ID what do I do

Hello Agnes w,
It sounds like you have two Apple ID’s and that is ok. Start with taking a look at the article below to go through and know how to use multiple Apple ID’s. You will need to make the decision to use one or the other if that is the case when it deals with your purchases. If you want to make the passwords the same, check out the second article to walk you through changing passwords on your Apple ID’s.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
Regards,
-Norm G.

HT1923 I have an IPad that has the apple displayed and it does not show in ITunes. It will not let me turn it off. What do I do?

I have an IPad that is displaying the Apple with the bar under it. It will not let me turn it off and it does not show up in iTunes so I can't do a Restore. Can I do a Hard Reset?

You need to subscribe to iTunes Match to store your music on iCloud:
http://www.apple.com/itunes/itunes-match/
To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to avoid output file and error lines when condition does not match

Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
Steen

Hi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian

The cumulative balance displayed in FS10N does not match the sum of the det

Hello,
The cumulative balance displayed in FS10N does not match the sum of the details. For example, we have a GL disbursement account that has a ***. Balance of 8 million. The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million. According to our users, the 2 balances should equal. I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it? I'm not sure how f.16 functions. Do we have to run it for each consecutive year? I'm not a FI specialist. I'm responsible for data archiving and the users think it's related to archiving. However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
Thank you very much in advance,
Lourdes

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

My album art is scrambled and does not match song or artist, iphone4

My album art is scrambled and does not match song or artist, iphone4

I can't promise this is going to work, but you can give it a try.
1. In iTunes, select your Ipod under Devices.
2. In the Music tab, clear the Display album artwork on your iPod, and then click Apply.
3. Reselect the check box and click Apply.
This worked for me when the artwork stopped displaying.
Good Luck,
30 GB Windows XP

Indesign cc 2014 displaying font that does not match font specified

Not on all fonts but with, in my case, when I specificy Meta or Futura, indesign displays times new roman - it says the font is available and that the font is installed but the displayed font does not match.
Have reinstalled font explorer pro plugin, restarted computer, indesign and font explorer to no avail. I have also switched off nearly all my fonts to check if there is a font clash - no fix………..

Do a search for adobfnt*.lst files and delete all of them that have two digits in place of the *. On Mac, also run a utility that can clean the font caches (FEX may be able to do this, but if not, Cocktail, among others can, or I think you can do it through Terminal).

My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

FAN and display does not match.

Similar Messages

Maybe you are looking for