Fan Control Program for Windows Vista
Does anyone know of a program with which I can control my Macbook Pro fan speed? Whenever I run Vista, my MBP runs HOT. From what I can hear the fans are running at a minimum of 4500 rpms. Any help would much appreciated. I am running Windows Vista Ultimate in Boot Camp.
You should probably post your question in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165
Similar Messages
-
Where can i find the icoud control panel for windows vista
I need to back up my iphone and cannot find the software for the icloud control panel for windows vista --- only for windows 7 and 8.
Where can I find this as Ineed to back upp my phone before an appointment tomorrow to replace my battery.
Thanks for your helpHere: http://support.apple.com/kb/DL1687.
If you're trying to back up your phone to iCloud, you don't do this on your computer. You have to do it using wifi. First go to Settings>iCloud, sign in with your Apple ID to create your account, tap Storage & Backup and turn iCloud Backup on at the bottom. Then, to manually start a backup right away, tap Back Up Now at the bottom. Connect it to your charger as the first backup will take some time to complete. (Subsequent backups will be much faster as they only back up changed files.)
After that, just connect it to wifi and your charger and lock the screen when you go to bed at night. It will automatically back up daily. -
Bootcamp control panel for windows vista
i have replaced a hard disk for my macbook pro (2008). when i try to download the windows support driver from bootcamp assistant it fail. then i skip that and straight away install windows vista. how ever it doesnt hv bootcamp contol panel... pls help.
Keep trying, you need it.
-
Audigy Zs Platinum Remote Control Driver For windows Vist
Anybody knows when will this come out', i can't use my remote.
I miss my audigy 2 platinum remote too...... I wonder if it will control windows media center
-
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy. There are 5 Ipod devices in the house and we deperatly need to get this fixed.
Any help would be greatly appreciated
RobertRefer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR. -
Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.Uninstalling the iCloud control panel should allow you to do that folder deletion.
-
Service pack 1 for windows vista home premium
Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?
Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H. -
hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.davidI second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
Help installing Flash player 9 for windows vista!!
Hello all i am currently using windows vista primium edition,
and i am trying to install the flash player 9 on the pc, i go
through all the steps and it shows as install it, but yet is not
working, i went to control pannel to see if it was there and it
wasent. So i really dont know what is happening or if i could
install these program to windows vista hopefully someone is out
there to help me in ther issue. ThanksHi Mark,
before you can Install Flash Player 9 you have to uninstall all previous versions with the uninstall tool: How to uninstall the Adobe Flash Player plug-in and ActiveX control
If this answered your question please consider granting some stars: Why reward points? -
hi all,
well today i installed the oracle biee on my machine(having windows vista).
Do i need to download the seperate dump of oracle biee for windows vista or dump for windows xp will work?????hi All,
Actually when i installed oracle biee on my machine (having windows vista) and replaced all corresponding files (like .rpd file & catalog and modified the nqsconfig.ini & instanceconfig.xml files) and tried to start the oracle bi presentation service, it was not starting(though i already started the oracle bi server and java host service).
i got the following error prompt:
"Windows could not start BI Presentation server on local computer.
For more information,review the system event log.if this is non-microsoft service,contact the service vendor, and refer to service specific error code-1"
Then i again replaced all the files to the default one(paint.rpd and paint catalog) and again tried to restart the service but this time i got the "error : 1053 Error 1053: The service did not respond to the start or control request in a timely fashion."
so i just want to confirm whether we need some patch or utility to run the oracle biee on windows vista
please help me out
Thanks -
HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)
Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
davidI went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David
Maybe you are looking for
-
PDF to b opened in a new window or in a download frame
when using hyperlink in iweb pdf file is opening in the same window. how can i make so the file is opening either in a new window or in a "save as" frame?
-
How do I get rid of an adobe textbox that shows up every time I open Firefox?
Adobe installed an update, I believe to my flashplayer and when it was finished, every time I opened my google page(Mozilla) I got a big box that said Adobe installer. There was no way to remove it so I went to add/delete programs and found the i
-
Hi I have a problem each time I record my model with between others a .swf file a balise <noscript> appears in all my pages linked with the model !!!! extract : <div align="center"></div> <div align="center"> <script type="text/javascript"> AC_FL_Run
-
Is Muse compatible with Email Service Providers. I found html code issues - PCs have viewing issues
Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.
-
Pb with abscents characters from keyboard
I installed Solaris 10 on Sun Xfire 4100 dual AMD opteron and all has been done correctely. I used JavaRconsole to install OS. But for instense when I want to type the ":" character in a term it's abscent from his place and I have the "<" or ">" char