Fan going crazy after shut down

It happened twice in the past two weeks. After shut down, a fan (in the back I believe) spin very very fast, as loud as a vacuum cleaner. The only way to stop it was to unplug my mac pro. It was so strange. I have had issues with fan noise, and the finder crashing. Anyone with an idea: I'm thinking of bringing the mac to the shop.

No I do not think so, I have the standard configuration: 2x2.8 Ghz with an ATI Radeon 2600.
Extra are 2x1GB memory from OWC, and 2 SATA Drives.
I've tried to reset the SMC many times, without noticing much of a difference: I've been monitoring the temperature at the power supply location and the memory bays: PS is around 110, memory around 105-120, depending on the Bay. I am running smcFan Control. I"m running the fans 1/4 faster than the MacPro default (according to smcFan Control preferences.)
Mea culpa, there's no AC in the room where I work, the Ambient temp has been 70-85.
Am I overtly concerned? I don't really have the time to bring the Mac to the shop.

Similar Messages

  • Envy 15t fan stays on after shut down

    When shutting down the computer, fan stays on almost five minutes before shutting off??  Is something operating in the background that I don't see?

    It's this one:
    Quote from: kmax2 on 02-December-13, 21:42:47
    BIOS Power Management and EPU2103 was disabled. I still have the problem.
    Quote
    If I take the battery out and put it back in then would that clear the CMOS?
    Remove power cord, then clear the CMOS by jumper or button,
    i thought you already done this.
    See here for guide: >>Clear CMOS Guide<<
    Quote
    What does BIOS update with EC mean? I know what a BIOS update is but what does EC mean?
    They probably mean to update BIOS with proper parameters to include addiction ROM holes.
    You can ask them for clarify about this, which BIOS you should update and what exact flash command line options to use.
    Quote
    What should I try first?
    Try Clear Cmos 1st,
    then try to Enable EUP [but it should be already enabled after clear cmos]
    but double checking,
    else ask them back about BIOS & EC flashing clarify

  • Fan going crazy after I just got optical drive repaired

    Well my fan now sounds like a loud air conditioner or something after getting it fixed at a mac store. Just got it back today because I had to replace my optical drive. I'm assuming it's not dust since it just started, and I do have an appointment set up for it to be looked at but I was hoping to get some comments from you guys.
    My computer's fans have never been this loud. And it won't go away either. They start up right when I start the computer up. I could leave it for 5 minutes without doing anything on it and they would still sound like a jet engine or something. Makes me afraid that my comp is going to fry itself or something.
    Idk but I think the store must have messed up on something to make it do this. I have heard the fans before but this is crazy.

    OFQ wrote:
    Well my fan now sounds like a loud air conditioner or something after getting it fixed at a mac store. Just got it back today because I had to replace my optical drive.
    hmm ... i wonder if your issue might be related to the experience another user had in this thread: http://discussions.apple.com/thread.jspa?threadID=2434866&tstart=0.
    JGG

  • Right after starting up display goes blank and shuts down?

    Right after starting up display goes blank and shuts down?
    Any ideas I can't get it started. Thought I would ask for help before making a genius appt.

    Thanks that was very helpful info. I was able to boot into the recovery disk partition and run some basic HD tests and it found no issues.  Then I booted into the hardware test and it found no issues. After these tests it still failed to boot into Mavericks. I'm guessing its a software issue and I can not find the original computer disk. I have a time machine backup from 2 months ago and I could use the disk utility on the recovery sector to launch it but I want to wait and see if I can boot from a software DVD first. If I can repair the current OS that is my best option.
    Thanks.

  • Fan doesn't turn off after shut down on 15" MBP C2D

    The fan on my 2-day old MBP C2D stays on even after shut down. The speed of the fan even changes. 3 hours after I shut down the fan was still spinning. I pulled the battery and pressed the power button to reset the SMC. As soon as I put the battery back in the fan immediately started spinning again. I didn't even power it on. When I do power it on the fan stops.
    My Macbook Pro is actually noisier when it's off than when it's powered on. Has anyone else encountered this. Hopefully there's an easy fix, I don't want to have to leave it with the Apple Store.

    A stab in the dark but have you tried resetting PRAM and NVRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    … and the System Management Controller…
    http://docs.info.apple.com/article.html?artnum=303319
    … ?

  • Mac Os 10.6.6 update start the fans goes crazy

    Hi to all
    Some months ago (almost a year from now) my mac start to become hot after only a few minutes it started up and the fan goes crazy but I never realize why. I made some search on the internet but the only answer I found was using some software to reduce fan speed. It didn't work. I run the Hardware test but nothing strange. I also took my macbook to an apple certified repair center but they told me that nothing was wrong. I also ask to another repair center but same thing. So I left my macbook as it was with this super fan noise all the time. A quite disturbing thing but there was no solution and for what I'm doing my machine is ok so why change it? (It was the only solution they gave me)
    Last day my hd broke down so I had to replace it. I took my macbook pro a1211 model to an apple repair center they change the hd with a new one.
    So I reinstall everything for the beginning. I took my snow leopard dvd formatted the new hd, installed the os, iWork 2008, iLife 2008, Mamp, CSS Edit, Espresso, Pixelmator and few other application such as Firefox, Camino, Etc...
    I use the macbook with mac os 10.6, because I had to finish some work, and with my big surprise for two days the machine was super silent no fans, no hot body ..... nothing. I never reboot it and still no fans and hot body wow.
    Today I wanted to install the developer kit with ios 4.2 and so I had to update the Mac os x to version 10.6.6 as soon as I made the update after the reboot the fans start again to go like crazy and after 15 minutes of work the macbook body become very hot.
    The question is why?
    Anyone can help me?
    Thanks in advance
    Gianfranco

    HI R C-R.
    The apps i've installed are just a few. Espresso, CSS Edit, MAMP, TextWrangler,Firefox, Camino, Chrome, Opera,BetterZip, Stuffit Expander, Pixelmator, 1Password, Dropbox, Xslimmer, VLC, CyberDuck, littlesnitch, iworks, iLife, wacom tablet driver.
    Nothing more. All the software is updated.
    Here the data but as you can see nothing strange but fans are on at the maximum speed!
    PIDProcess Name % CPU Threads Real Mem Kind Sudden Term.
    ## Firefox 2,1 15 106,3 MB Intel
    ## Activity Monitor 1,2 2 20,0 MB Intel (64 Yes
    ## activitymonitord 0,9 1 1,3 MB Intel (64 No
    0 kernel_task 0,9 57 138,0 MB Intel
    ## Finder 0,3 9 36,1 MB Intel (64 Yes
    81 WindowServer 0,2 5 53,4 MB Intel (64 No
    ## Dock 0,1 3 15,5 MB Intel (64 No
    ## Little Snitch Network Mo 0,1 4 4,4 MB Intel No
    14 configd 0,1 7 3,3 MB Intel (64 Yes
    1 launchd 0 3 1,1 MB Intel (64 bit)
    ## SystemUIServer 0 3 19,5 MB Intel (64 Yes
    ## Apple80211Agent 0 3 9,5 MB Intel (64 No
    ## Safari 0 12 236,2 MB Intel (64 No
    16 distnoted 0 3 1,3 MB Intel (64 Yes
    11 DirectoryService 0 6 4,7 MB Intel (64 No
    ## launchd 0 2 1.000 KB Intel (64 No
    13 diskarbitrationd 0 3 1,4 MB Intel (64 No
    44 mds 0 5 31,4 MB Intel (64 No
    17 blued 0 3 4,7 MB Intel (64 Yes
    10 kextd 0 3 2,5 MB Intel (64 No
    22 securityd 0 2 3,0 MB Intel (64 No
    33 ntpd 0 1 1,1 MB Intel (64 Yes
    34 cupsd 0 3 2,9 MB Intel (64 Yes
    19 mDNSResponder 0 3 2,2 MB Intel (64 No
    35 httpd 0 1 3,9 MB Intel (64 No
    ## UserEventAgent 0 3 5,6 MB Intel (64 Yes
    62 coreservicesd 0 4 18,8 MB Intel (64 Yes
    60 lsd 0 3 3,8 MB Intel No
    ## TextEdit 0 2 12,0 MB Intel (64 No
    57 autofsd 0 2 940 KB Intel (64 Yes
    ## pboard 0 1 832 KB Intel (64 Yes
    ## fontd 0 2 6,4 MB Intel (64 Yes
    51 dynamic_pager 0 1 788 KB Intel (64 Yes
    49 fseventsd 0 13 1,9 MB Intel (64 No
    48 hidd 0 2 948 KB Intel (64 Yes
    46 KernelEventAgent 0 3 988 KB Intel (64 Yes
    45 loginwindow 0 2 8,2 MB Intel (64 No
    42 RFBRegisterMDNS 0 2 1,7 MB Intel (64 Yes
    ## mdworker 0 3 11,2 MB Intel (64 No
    ## TextWrangler 0 3 27,9 MB Intel No
    38 usbmuxd 0 3 1,6 MB Intel (64 Yes
    36 krb5kdc 0 2 1,9 MB Intel (64 Yes
    ## Preferenze di Sistema 0 2 25,7 MB Intel (64 Yes
    97 coreaudiod 0 3 3,2 MB Intel (64 No
    ## WebKitPluginAgent 0 2 992 KB Intel (64 Yes
    ## mdworker 0 4 3,1 MB Intel (64 No
    ## TabletDriver 0 2 4,4 MB Intel (64 No
    ## ConsumerTouchDriver 0 2 5,5 MB Intel (64 No
    84 cvmsServ 0 1 856 KB Intel (64 Yes
    ## iTunesHelper 0 3 2,8 MB Intel (64 Yes
    83 httpd 0 1 620 KB Intel (64 bit)
    ## AppleSpell.service 0 2 7,0 MB Intel (64 Yes
    15 syslogd 0 4 684 KB Intel (64 No
    ## 1PasswordAgent 0 2 9,3 MB Intel (64 No
    12 notifyd 0 2 596 KB Intel (64 Yes
    ## Little Snitch UIAgent 0 3 5,9 MB Intel No
    ## Quick Look Helper 0 6 8,6 MB Intel (64 Yes
    ## PenTabletDriver 0 3 9,3 MB Intel (64 No
    ## Agente base AirPort 0 3 5,5 MB Intel (64 Yes
    ## AppleVNCServer 0 4 3,7 MB Intel (64 Yes

  • Satellite E45t won't start for few hours after shut down

    I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble. 
    Please help.

    Hello,
    I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly"  and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle. 
    This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2.  I also have disabled rapid start, etc after the problem began.
    I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
    Thanks!!

  • Why does bookmarks disappear in menu bar after shutting down?, Why does bookmarks disappear in menu bar after shutting down?, Why does bookmarks disappear in menu bar after shutting down?

    Why does bookmarks in menu bar disappear after shutting down and turning mac on?

    When I am in "COLLECTIONS AND BOOKMARKS" view, I changed the name of the folder that is listed under "bookmarks" (that is designed to be a drop-down menu on the Bookmark Bar), I changed the name to "TV 1" from "TV Shows". I also added another folder under the Bookmarks called "TV 2" and I dragged and dropped two bookmarks from the "Bookmarks Menu" listing to the "TV 2" folder, and yet Safari would not update in real-time the Bookmark Bar to recognize that I created a "TV 2" folder/drop-down menu, nor did it update the contents of "TV Shows" to become "TV 1".
    The only way I was able to update the drop-down menu bookmark folders on the Bookmark Bar was to drag-and-drop them one at a time from the "COLLECTIONS and BOOKMARKS" view.
    Is it just me or is this a ******** way of updating bookmarks?
    I think it is perfectly fine as being ONE WAY of updating bookmarks, but there really should be "real-time" updating of bookmarks. That is to say, I should be able to choose "bookmark this page" and add it to the folder named "TV Shows" and automatically see Safari update it without having to make two steps: 1) choosing the bookmark, and 2) going into the list of bookmarks to manually drag and drop the bookmark into the Bookmark Bar that contains the folder/drop-down menu.

  • Fan going crazy when booting

    When I boot up iMac, the fan goes crazy. After a moment it stops and is quiet again. I unplugged my power and plugged it in again but that does't work. I tried to start AHT by holding D when booting, but that didn't work. I didn't get any discs when I bought my Mac so I can't run AHT using the disc. How can this be fixed?
    I also have Windows 7 installed but I don't know if this is relevant. The fan goes mental everytime i boot up. It doesn't matter whether I do that with Windows or OSX.

    OS X Mountain Lion- Use Apple Hardware Test
    Intel-based Macs- Using Apple Hardware Test

  • My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off. I had to do

    My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off.

    You should be able to turn off your MBP by pressing the power button down continously for about 5-10 sec. When you reboot it you are going to want to enter into a terminal screen. Hopefully the following YouTube video helps: http://www.youtube.com/watch?v=qKOX72xNmbo

  • Mac mini restarts on its own after shut-down.

    The Mac mini will restart by itself about 10 minutes after shut down. I turned off all the restart options in energy saver. Funning 10.4.8 with the latest firmware instalation.
    Any suggestions how to stop this?

    I have had this problem for a looooong time and I think I finally resolved it. Last weekend I was trying a demo of MacPilot 3 and found Elgato's EyeTV had two items in the Power > Events list. Apparently when you set EyeTV to start up the computer for it's schedule it restarts the computer randomly rather in a reasonable amount of time before the recording begins. Since there were two files, I think 1 was left over from previous EyeTV version and was starting up the computer even though I told EyeTV not to start the computer at a later date. Deleting both files seems to be the solution.

  • Is it possible to continue downloading OS X Lion after shutting down the computer?

    I am downloading the OS X Lion app on my MacBook Pro and is only at 180mb after an hour. I am downloading this app for free because I recently purchased a MacBook Pro. Is there a way I can continue the download even after shutting down the computer? Will I be charged the next time I try to re-download the app--as in, will the code for downloading the app for free expire?
    Thank you SO much!

    I downloaded OS X Lion over the period of a day or so and what you have to do is pause the download (for a snow leopard user that should be in your dock) and then shut down your machine. When you boot it back up, you should be able to resume the download by clicking the OS X Lion logo and typing in your Apple ID info and the download should resume at the same spot where it was when you left it.

  • Losing Desktop Items/Documents after shutting down and restarting

    Twice, over the last couple of months after shutting down and restarting my macbook, everything on my desktop gets deleted, and it seems all the settings go back to their original form?
    Anyone have this problem?
    Message was edited by: jram1111

    Hi, I had this problem and it was due to setting file vault in the security settings. I removed having that set and then I had to go into system settings, Account and under Login Items, add back items such as mail and things that required passwords that were not coming up on my dock after each time I shut down.
    I hope this is helpful! Better late than never - if you have fixed yours, maybe this will help someone else.

  • In 2 node RAC. After shutting down database not able to connect.

    I have 2 node Oracle 10g RAC (RAC-1 and RAC-2) on Windows 2003 Server.
    After shutting down instance on RAC-2
    I am not able to connect to database from any node.
    I did this on RAC-2 :
    SQL>shutdown immediate;
         Database went down smoothly.
    SQL>conn sys/oracle@rac as sysdba
    ERROR:
    ORA-12514: TNS:listener does not currnetly know of services requested in connect descriptor.
    My first node is running fine but I am not able to connect to database from first node or from client.
    Any suggestion???
    Regards:
    Sushil

    One question I want to ask, what should be the Listener Services startup mode in RAC? MANUAL or AUTOMATIC???Ideally, if you are instances and other oracle resources are set to autostart then there is no reason for you to set the listener to MANUAL. You may like to change it to AUTOMATIC so that on reboot it comes up without manual intervention.

  • Simple floating clock does not appear after shut down

    Hi,
    On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
    Can anybody tell me how to overcome this?
    Cheers

    And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
    As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
    If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
    If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
    Is Simple Floating Clock on your Menu bar?
    Is Simple Floating Clock set to float?

Maybe you are looking for

  • How to write the table content of JSP to a file

    Hi there, i have a JSP which displays data in table format. i need to copy the data of the table( columns with comma separated and rows with line breaks). on Mouse click of an hyper link or Button i need to perform the above action. as i found java s

  • Recommendation for Moving Screen Caps

    I'm looking for a program that will do screen capture movies. Snapz Pro seems like it will do what I want but I wanted to see if there was anything else somebody thought was AWESOME before I shell out my hard earned $$$.

  • Faxing in Reader XI

    Earlier versions of Reader allowed faxing of a PDF via the Print option. (I have an HP LaserJet 5mp and use Mac OS X.) I cannot find the option in Reader XI. Does it no longer exist? 

  • Changing Cycle Modification factor in a maintenance plan.

    On the basis of MTBF of an equipment, Can i change cycle modification factor of any maintenance plan.i.e. suppose MTBF of an equipment if reaches to 3 months then cycle modification factor for all preventive plan should get multiplied by 1.5 automati

  • SAB ABAP CERTIFICATION

    Hi all, I want to write sap abap certification exam in india without undergoing training , so I want to know how many years of experience should I have to write exam without undergoing training.I am currently working for an MNC having less than 1 yea