FAN IS NOT WORKING

I am the owner of a lenvo 3000 N200 laptop model 0769 AF7.However the fan stopped working as i tried replacing the fan but the new one is not working.Everything seem to be working except the battery .There are no error messages and the fan does not spin not even booting up.I dont know if it is the motherboard.Can someone help?
Message edited to Lower case letters

I also have a 3000 N200 running Windows 7. In the last month it started overheating and shutting down. I don't feel any air moving, so i don't think the fan is running. In case it's related, the Nvidia driver crashes fairly regularly (some other sites thought it might be related.)

Similar Messages

Fan is not working correctly

when i on my laptop message displayed is colling fan is not working correctly it will shut down if you not press enter in 15 minuts plz give me solution

The fan likely needs to be replaced. What model of laptop is this?

My cpu fan is not working where can i buy it and how much is it

my cpu fan is not working, where can i buy one .

Please identify your notebook/pc .
Look at the base/rear/side of the notebook/pc at the barcoded sticker.
Post item number 2 as seen on the following example of an HP notebook's barcoded sticker. The barcode on your HP product may be slightly different in appearance, but will still have the important information needed for us to help you.
###Do not post the serial number as it is personal information.###
Post the installed operating system version ( and whether it is 32 or 64-bit ) and post whether the CPU is an AMD or Intel product
Not posting all of the information as requested will delay our responses and slow troubleshooting of the issue that led you to author a thread.
Is your notebook/PC still within its warranty period?
Once you post this information we can help you.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Fan is not working well of a pavilion g6

when starting up my laptop, it reports that my fan is not working well and when it remains on for about 10minutes it starts to be hot at the position where the fan is located. the problem just started.

Hello
could you sense the fan is running by hearing and hot air blow out from air vent?
1) if fan is running and running faster when hot, it means fan is working. please check if anything block the air vent or air intake. only Air can flow freely, it can cooling down the CPU.
2) If Fan is running and air vent is not block and unit is been used long time, maybe the dust. if you have skill, please clean dust, it need remove some cover to disclose fan/heatsink.
3) update BIOS to latest. of course Fan need to replaced if it is not run, but the running Fan usually don't need to be replaced.
I work for HP.
If you like my reply, please click "Kudos"

Fan is not working.. switching off automatically every 10 mins

fan is not working.. wat to do...my lapi is switing off after every 10 mins

Hi there ,
I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number? This will help me find the specifications for your specific HP Pavilion Notebook and what the part number is for the proper fan. If you need more immediate assistance or would like to speak to someone about a fan replacement, please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately.
Thanks.

HP Elitebook 8470p - from battery the fan is not working

Hello Everybody elitebook Expert!
My laptop config in short: i5-3320m 2.60GHz with integrated graphics Intel HD4000, 4GB Ram.
I don't like the elitebook 8470p cooling system and i can't see the normal reason of the machanism.
So, there is no problem when the laptop is on AC power, the fan is on and works well and this is ok.
But, i have problem when the laptop is on Battery because when the laptop is in idle mode the fan is not working but stay.
Only starts then just when it attains the 55 degrees. This is not good, moreover it is bad for me, i dont like it because it is warm.
I want the ventilator to work so when the machine is on AC power everytime on Battery too.
In the BIOS there is no option for that and i can't see why...
Plase help me! I need a program what can turn on the fan when the laptop is on battery or a tweaker or something else i don't know what but i need something.
Aida64 says: motherboard name is: HP 179B
BIOS type is: Compaq EFI
BIOS version: 68ICF Ver.F.32 Date: 2012/05/12
(I know that there is a newer BIOS but i don't think so that there is an option in the new that can handle the fan on battery mode).
(Sorry for my English please).
Ákos

Thanks for the question Akos,
I understand that CPU FAN does not work on battery mode in windows mode however it works in BIOS mode.
firstly, as you know BIOS has control over CPU fan and CPU thermal table - however OS has better thermal managements. once PC is up, BIOS information and thermal control is handles by OS. to trigger a change it has to be still routed through firmware only however instructions are based on the BIOS thermal table and windows power management.
we know the thermal management of windows is better than BIOS and best to provide you best battery performance. so in BIOS CPU fan may be not mostly spinning all the time but in windows its more effective.
one example for the same is, when you update BIOS on your PC or we-write a BIOS - CPU FAn will be running at full RPM during the process because windows does not control the CPU fan at that time due to update/change process.
its completely normal that you see most of the time CPU FAN is off or spins for a very minimal time. if its always off that means there is something wrong, however if its seen off on battery in windows - its ok. i do not think there is anything wrong here.
if you want to have the FAN run always, that means you need to run your PC at a poor/bad thermal table. which i do not think possible with windows 8 platform because its largely looks like a mobile focused(better battery run time) platform.
you may try installing any of the older (prefer non-windows OS) to check. however its not recommended. because it may result in a damage to hardware too (if a non-supported OS used).
Hope this helps... Good Luck !!!!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Fan - Mine not working (do I need to switch it on)

the perfromance on my MacBook Pro is VERY slow - and I now realize it could be because the Fan is not working - Does it need ot be activated or something?
This is so frustrating, We have 8 macs in our studio, 6 of which have had to be replaced due to something faulty on them......I hope this isn't mac replacement 7!!

Fans turn on automatically when the CPU gets to a specific temp. they don't need to be turned on manually.
When you say your MBP is running slow:
a) generally or all programs?
b) how much RAM do you have? And is it OEM or 3rd party?
c) is it networked?
Your problem could be a bad fan, bad temp sensor, or could be you are running programs via Rosetta. Give us more info and we could probably isolate the issue better.

Cpu fan is not working.

Hi,My CPU fan is not working properly.i want to purchase CPU fan for my laptap.laptop details: HP Pavilion dv6-6119tx Entertainment Notebook PC Product number: QB365PA#ACJ please give me product number (whatever is required to find out) so that i can purchase from HP store. thanks in advance.

Please identify your notebook/pc .
Look at the base/rear/side of the notebook/pc at the barcoded sticker.
Post item number 2 as seen on the following example of an HP notebook's barcoded sticker. The barcode on your HP product may be slightly different in appearance, but will still have the important information needed for us to help you.
###Do not post the serial number as it is personal information.###
Post the installed operating system version ( and whether it is 32 or 64-bit ) and post whether the CPU is an AMD or Intel product
Not posting all of the information as requested will delay our responses and slow troubleshooting of the issue that led you to author a thread.
Is your notebook/PC still within its warranty period?
Once you post this information we can help you.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Upgraded RAM and now Fan is not working.

I have upgraded my RAM to 2GB. (using video guide) Everything appeared OK, but the mac mini was overheating and shutting down after 10 - 15 minutes. It appears that the cooling fan is not working, as far as I can tell. I have checked and cannot find any loose cables, I have tried powering up with and without the fan control cable connected (next to the battery at front of mac).
I have tried the hardware test but this is OK. I have tried some software downloads for monitoring the fan speed, but these appear not to work.
Is there a cable or connect that I should be looking at? DVD, sound and all else seems OK. The memory passes all ram tests.

I think you are referring to the fan control lead, which attaches at the front of the PCB near the battery. Is this the case? I have read that this only controls the speed so you don't have to attach the cable, in fact it suggests that if you leave this disconnected the fan should run at full speed.
This is the only cable that I needed to disconnect, and have tried with it attached and disconnected, with the same issue. I am thinking that the fan is dead, or is being stopped by the magnetic tiles, I guess these are used to create a magnetic field that forces the blades to spin, so I guess if one of these has come away from the unit then it may not work. I can see that I can get a replacement fan for about $29.
Can anyone confirm that these magnetic tiles are integral to the working of the fan?

What do you think is the problem of my macbook, few days ago, the fan is not working its 000rpm, early this morning, it is working already. what suppose is the problem?

what do you think is the problem of my macbook, few days ago, the fan is not working its 000rpm, early this morning, it is working already.

What did the prompt look like? Did it look like the image here? http://support.apple.com/kb/TS3742

Intel 865PE/G fan does not work

I have a 865PE Neo2-FIS@R Motherboardand the Intel 865PE/G fan does not work. Lately my computer has been crashing after some video intense programs. Could the problems be connected. If so does anyone know how to fix/start the fan? Is there anything in the bios? Any ideas would be appreciated.
TheHelmet

Quote
Originally posted by bejon2000
Go to controlpanel / system / advanced / settings / uncheck automatic reboot.
Now computer won´t reboot, but hopefully give an error-message on screen.
This could help giving info what causes the crash.
Crash the computer and come back with the message.
I am not sure what you need, so I wrote down all of it.
the top of the page said:
diver_irql_not_less_or_equal
onthe bottom is had:
Technical Information
***stop:OXOOOOOD11 (OXOOOOOOOO, OXOOOOOOO2, OXOOOOOOOO, OXF656A972
*** CMUDA.SYS - ADDRESS F656A972 BASE AT F6544000 DATESTAMP 4088C23A
I HOPE THIS WILL HELP
TheHelmet

My pavillion g6 notebook fan is not working how do i fix it?

My pavillion g6 notebook fan is not working how do i fix it?
i found out a few days ago when i was not hearing the sound my fan usually does because its really loud
and then 1 day i got the message. and is there a way to make it quiet?

Hey FlowZ,
Here is the Manual that shows you how to remove all the replaceable part in the notebook. Go to page 73 where it tells you the part #'s for the fans depending on what your processor is.
Now, i wouldn't advise you to remove it yourself.
But these are the steps to remove the Fan.
1. Turn the system board right-side up, with the front toward you.
2. Disconnect the fan cable from the system board (1).
3. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system
board.
4. Follow the sequence embossed on heat sink to loosen the six Phillips 10.0 x 2.0 captive screws
(3) that secure the fan/heat sink assembly to the system board.
If you want to replace the fan just go to Hp PartSurfer and search by your product #.
Here is a Document that will help you with Reducing Heat inside the PC.
Also,Reducing Fan Noise.
THX

HSTNN-E06C - Fan is not working, need a replacement.

Hello.
I have a HSTNN-E06C laptop. It seems that my CPU fan does not work anymore.
Before I got my laptop disassembled, I would like to prepare myself with proper components. I would like to ask You what is the FAN product code, so I will be able to order a fan replacement?
can you also provide me some service manual, which will help me to take the laptop apart in proper order.
Fan replacement should not be any problem for me, so I really count on you, guys
Thanks in advance.
This question was solved.
View Solution.

If it is the fan that is you're having problem with, you can replace it. HP doesn't provide cooling fan alone as spare part.
You might want to contact the online sellers mentioned above or your local stores with the part number & ask about it.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Satellite A110 shut down suddenly - CPU fan is not working

Hello!
The CPU fan on my brand new A110 is not working. The notebook will shut down suddenly, without hibernation or standby for any CPU consuming activity.
Can it be linked to a configuration/ software problem? If so, how to check it?
Many thanks.

Hi
For me it seems like a hardware malfunction. If the fan does not work as it should then it has nothing to do with the software.
The A110 seems to be a very new unit and I dont think the dust and debris are responsible for such automatically shut downs.
Why you dont take your warranty??? If the warranty is valid everything should be checked and replaced for free

6800 fan adjuster not working

Hi all,
This is my first post I hope someone can help me. Basically I have just received a 6800 128mb card. My problem is that i bought this card mainly becuase of the superb cooling solution and the fact that the fan speed can be adjusted.
However no matter what I try the fan is 100% all the time. I move the slider back and froth and nothing happens.
I have installed all the latest drivers and no change, I have the msi 3d turbo as well but that will not show fan speeds etc. is this my problem? and if so does anyone know how to sort it before I rma?
Many thanks in advance.

You could try to remove the small plastic plate which keeps the FAN speed from getting too low or stopping.
I also can't hear a difference for different settings of the upper 50% of the slider setting, but if you put it lower the slider gets very sensitive.
If it still does not work, I would RMA the card.

FAN IS NOT WORKING

Similar Messages

Maybe you are looking for