Fan running at high when cpu not being used, Macbook not responding - Help!
Please help!
Quite often now when I leave my macbook for an a few hours (the screen goes to sleep but not the computer), I come back to the fan running at full speed and then when I touch the trackpad, I can move the mouse around, but nothing responds (i.e. when I move the mouse over the dock, the dock doesn't pop up...and I can't click anything on the desktop). So I have to hold down the power button to shut it off and then restart the computer. Then it works fine, but if I leave it for a while and come back, half the time I come back I encounter this problem again.
Any help?
Check your activity monitor. Sounds like you have a program running in the back ground your not aware of.
You might also try to reset the SMC and/or PRAM.
Similar Messages
-
This does not happen when connected to a docking device or computer, only when it is being used with headphones. If I reboot, it's fine, but it does happen again.
Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice. -
[Solved] Xorg log says Option "AccelMethod" is not being used
I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.
-
How to tell which Indexes are not being used?
We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One
particularily large customer takes a very long time and we are looking for ways to speed up thier data import and transformation. I would like to see which indexes he does not use and possibly remove them. Each night we fully repopulate hundreds of staging
and ods tables and incrementally delete and repopulate the days work for a handful of history type tables. Removing some indexes off of the large tables could make a big impact.
How can i tell which indexes the customer does not use?> IDENTIFYING UNUSED INDEXES IN A SQL SERVER DATABASE
Just because an index is not being used does not necessarily mean it should be removed.
> Index This: All About SQL Server Indexes
sp_BlitzIndex
José Diz Belo Horizonte, MG - Brasil -
Will not boot up and fans run at high speed
will not boot up and fans run at high speed
after much head scratching I ran the hardware test disk from cd. The test showed a memory issue I eliminated the faulty one systematically. So it wasn't a hard drive or software problem in the end it was faulty memory. What was misleading was the computer telling me there was a fault on the hard drive. The machine works fine now. Thanks to people's comments I learned a bit more about the G5 that helped eliminate probable causes
-
IMAC G5 fans running at high RPM
Hello,
I have a 20" G5 iMac and just had the motherboard replaced under warranty. Since the replacement my fans will start to run at very high rpm's fr no reason. It will happen even when the computer is not being used and no applications are running. It is currently at:
CPU 122 degrees
CPU fan 2996 rpm
HD 124 degrees
HD fan 4178 rpm
System fan 3098 rpm
I have called applecare and they had me do several resets which seemed to help for about 1 hour and then the fans have ramped up and not gone down in the past hour. This last time I was watching TV and heard a noise from the computer and low and behold it was the fans. Nobody was working on the computer and all apps were closed. I bought this computer in September 2005 and have had 2 lcd's replaced and a logic board replaced. I am getting frustrated with this, my first, Apple computer. Does anyone have an idea of why the fans are running so high? I never had a problem like this with my old logic board.Have you looked in Activity Monitor to see if any applications are causing the fans to run? Applications/Utilities/Activity Monitor.
-
Late 2014 iMac 5K running unusually slowly with fans running at high speed
Problem description:
iMac 5K
The computer is running unusually slowly although it is not experiencing high CPU utilization.
The computer's fans run at high speed although the computer is not experiencing heavy usage.
Apple Diagnostics points to SMC problem.
SMC and PRAM resets have not worked.
See Etre Report below.
Thanks for help.
Herbie49
EtreCheck version: 2.1.8 (121)
Report generated 30. März 2015 07:32:40 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Hardware Information: ℹ️
iMac (Retina 5K, 27-inch, Late 2014) (Technical Specifications)
iMac - model: iMac15,1
1 4 GHz Intel Core i7 CPU: 4-core
32 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
BANK 0/DIMM1
8 GB DDR3 1600 MHz ok
BANK 1/DIMM1
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
AMD Radeon R9 M295X - VRAM: 4096 MB
iMac spdisplays_5120x2880Retina
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:31:53
Disk Information: ℹ️
APPLE SSD SM0512F disk1 : (500,28 GB)
EFI (disk1s1) <not mounted> : 210 MB
Macintosh SSHD (disk1s2) / : 499.42 GB (251.32 GB free)
Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
Samsung SSD 840 EVO 750GB disk0 : (750,16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Herbies Daten (disk0s2) /Volumes/Herbies Daten : 749.30 GB (299.14 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Application Support/Symantec/AntiVirus
[not loaded] com.symantec.kext.SymAPComm (11.1.2f18) [Click for support]
/System/Library/Extensions
[not loaded] com.Logitech.Control Center.HID Driver (2.4.0) [Click for support]
[not loaded] com.symantec.kext.internetSecurity (1.3.2f5) [Click for support]
[not loaded] com.symantec.kext.ips (3.2f8) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.symantec.uiagent.application.plist [Click for support]
[not loaded] com.teamviewer.teamviewer.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.bombich.ccc.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.symantec.avscandaemon.plist [Click for support]
[running] com.symantec.diskMountNotify.plist [Click for support]
[failed] com.symantec.MissedTasks.plist [Click for support]
[loaded] com.symantec.navapd.plist [Click for support]
[loaded] com.symantec.navapdaemonsl.plist [Click for support]
[loaded] com.symantec.Sched503-1.plist [Click for support]
[loaded] com.symantec.Sched505-3.plist [Click for support]
[running] com.symantec.sharedsettings.plist [Click for support]
[running] com.symantec.symdaemon.plist [Click for support]
[failed] com.symantec.symSchedDaemon.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] de.meilenstein.MSTFirstRunInstaller.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.adobe.ARM.[...].plist [Click for support] [Click for details]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] de.starface.STARFACE-Client.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Notizzettel Programm Hidden (/Applications/Stickies.app)
Adobe Reader Programm (/Applications/Adobe Reader.app)
Dropbox Programm (/Applications/Dropbox.app)
SpyderUtility Programm (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
PopChar Programm (/Applications/PopChar.app)
STARFACE Client Programm (/Users/[redacted]/Desktop/STARFACE Client.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.5 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 10.1.5 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
RealPlayer Plugin: Version: Unknown
Safari Extensions: ℹ️
1Password
ExifExt
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Growl [Click for support]
Norton\nQuickMenu [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh SSHD: Disk size: 499.42 GB Disk used: 248.10 GB
Destinations:
Backups [Network]
Total size: 6.00 TB
Total number of backups: 39
Oldest backup: 2015-01-31 05:27:48 +0000
Last backup: 2015-03-27 20:28:54 +0000
Size of backup disk: Excellent
Backup size 6.00 TB > (Disk size 499.42 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
0% Dropbox
0% SymDaemon
Top Processes by Memory: ℹ️
241 MB Mail
206 MB Finder
172 MB Safari
137 MB Stickies
137 MB WindowServer
Virtual Memory Information: ℹ️
29.20 GB Free RAM
2.79 GB Active RAM
721 MB Inactive RAM
1.64 GB Wired RAM
1.34 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 30, 2015, 06:58:02 AM /Library/Logs/DiagnosticReports/deleted_2015-03-30-065802_[redacted].crash
Mar 30, 2015, 06:55:24 AM Self test - passedFirst uninstall your antivirus. Use only a vendor-provided uninstaller or uninstallation instructions. Never remove files by hand. Never use an "app zapper".
If that doesn't fix it, take it back to Apple for service. -
Macbook Pro Fans Running At High Speed
My MBP 17" CoreDuo 2.16ghz came back from having the Logic Board replaced at the weekend. All is well except that now the fans run at high speed all the time.
I have installed SMCFanControl, and the current readings are 45 / 113 degrees and the fans are running at 5500 rpm. I took the machine back to the Apple store but when I was there the fans didn't go above 3000rpm (typical huh?). It's nice that the case is now a lot cooler than it used to be but the fans seem very loud to me.
The question is, is this normal? I am not running anything very heavy duty at the moment. Any ideas?
Thanks
MattI tend to agree with Ned on SMC fan control (that it arguably causes more problems than it solves).
I had a similar problem with mine recently having the fans run constantly and at full speed. My temperatures never approached yours, but it would fail to go to sleep etc.
I would start with the advice Ned gave you. This is the same path Apple Care led me down in trying to resolve the issue.
Ultimately though I had to do an archival install of the operating system. It is non-destructive so it wasn't a big deal. I just had to slowly re-install patches and observe behavior. Oddly I was able to patch back up to 10.4.9 without the issue re-occuring so the root cause is still a mystery to me.
edit
Patch gone bad maybe? I tried re-applying the 10.4.9 combo before attempting the archival install route with no success. I know that has been suggested many times. Apparenty it solves many issues, but it failed to solve mine. -
Fan running at high speed (iMac 2011)
I'm using an iMac mid-2011 model, 21.5". For the past few weeks, I'm facing an issue where the fan runs at high speed (>3900 rpm). This generally happens when I use the mac for more than an hour with simple tasks like browsing, checking mails, working on word / powerpoint, etc. If I play a game or watch a video, it happens faster in 15 - 30 mins.
I've tried SMS reset several times but it did not help.
I also ran the apple hardware test (extended testing) and got the following error:
4SNS / 1 / 40000000 : TS2p - 121.250
Could anyone help me understand what this error means?
Thanks.There is a sensor error. That is most likely why you are experiencing the problem. Take it in for service.
-
Fans run full speed when using Parallels
I have Parallels installed on my MacBook but the problems is, whenever I run Windows XP, the fans run at full speed. I try not to run too many programs but nothing seems to help.
Any suggestions?I think that it's normal that the fans run full speed when you use Parallels. It also means that your MacBook's thermal paste was applied well.
Runing Windows XP in Parallels is a CPU intensive task and it takes a lot of power to run it. As a consequence the CPU get hot and the heat is transfered to the cooler, where the temp sensors sense it and make the fans run faster.
It's normal.
I bet your MB doesn't get as hot as some do... -
Mac running slow and fan running at high speed
MacPro1,1, osx 10.7.5, 8gb ram
My mac is running slow and fan running at high speed & very loud. On MRI diagnostic it passes everything except this error "CPU Proximity: Can't Read ". I did low level configuration and still having issue with unit.See Below.
Mac running slow and fan running at high speed -
IMac (Oct 2009) keeps shutting down and restarting when not being used.
At least once a day, usually when not being used, I will see a dialog box that say computer had to restart due to a problem. data in problem report does not clearly state problem - many multi-page entries
Have reinstalled OS 10.8.2 once
this morning tried to restart with safe boot and had spinning beach ball for more than 15 minutes. shut down and restarted nin recovery mode. verified and repaired permissions (all seem to be related to Canon Pronter plug-ins- had an error message yesteday asking if I wanted to repair printer software and I said yes). Printer seems to be working. Had one statement that indicated a screensaver issue-see below
a while back, iTunes album art screensaver hung up with just two album covers flipping in all rows and columns.
after a few restarts, it started working correctly again..- yesterday I set screen saver to never, but still had a crash this morningHere's the latest panic report. BTW, I ran for a while from an external system boot - very sloww (thumbdrive), but nothing happened. However, when I retarted I tried to restart in Safe Mode and the launch never completed (30 minutes without start)
Tue Jan 1 07:15:40 2013
panic(cpu 0 caller 0xffffff8002443908): "zalloc: \"buf.8192\" (878 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:1826
Backtrace (CPU 0), Frame : Return Address
0xffffff800aafb2b0 : 0xffffff800241d626
0xffffff800aafb320 : 0xffffff8002443908
0xffffff800aafb400 : 0xffffff80024de8d8
0xffffff800aafb450 : 0xffffff80024de395
0xffffff800aafb500 : 0xffffff80024dd64b
0xffffff800aafb530 : 0xffffff80024dd7f7
0xffffff800aafb550 : 0xffffff80026e7766
0xffffff800aafb5c0 : 0xffffff800272024c
0xffffff800aafb5e0 : 0xffffff8002721314
0xffffff800aafb680 : 0xffffff800271d2a0
0xffffff800aafb790 : 0xffffff800271959c
0xffffff800aafb840 : 0xffffff800271936a
0xffffff800aafb8c0 : 0xffffff80025137df
0xffffff800aafb910 : 0xffffff8002509fe1
0xffffff800aafb950 : 0xffffff800252685c
0xffffff800aafba00 : 0xffffff8002526679
0xffffff800aafba30 : 0xffffff8002712518
0xffffff800aafbaa0 : 0xffffff8002511c46
0xffffff800aafbae0 : 0xffffff800250936c
0xffffff800aafbb90 : 0xffffff80024fbb49
0xffffff800aafbc40 : 0xffffff80024fc314
0xffffff800aafbf50 : 0xffffff80027e182a
0xffffff800aafbfb0 : 0xffffff80024ced33
BSD process name corresponding to current thread: mdworker
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel slide: 0x0000000002200000
Kernel text base: 0xffffff8002400000
System model name: iMac10,1 (Mac-F2268DC8)
System uptime in nanoseconds: 39390380895329
vm objects:17562048
vm object hash entri:2264400
VM map entries:6216720
pv_list:19034112
vm pages:74043792
kalloc.32:1826816
kalloc.64:170766336
kalloc.128:649785344
kalloc.256:648183808
kalloc.512:2285568
kalloc.1024:2637824
kalloc.4096:2387968
kalloc.8192:3989504
ipc ports:2168672
threads:1166880
vnodes:16507128
namecache:6952320
HFS node:21840864
HFS fork:6352896
decmpfs_cnode:2244312
buf.8192:7192576
ubc_info zone:3559464
vnode pager structur:1978800
Kernel Stacks:1982464
PageTables:44011520
Kalloc.Large:12347186
Backtrace suspected of leaking: (outstanding bytes: 236544)
0xffffff80024435b9
0xffffff80024245ed
0xffffff80027ee1bd
0xffffff80028507f7
0xffffff800285075b
0xffffff7f82b6b1ac
0xffffff7f82b72922
0xffffff7f82ab138b
0xffffff7f82ab49b0
0xffffff7f829f843c
0xffffff800243dcde
Kernel Extensions in backtrace:
com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000->0xffffff7f82a1cfff
com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000->0xffffff7f82ac3fff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
com.seagate.driver.PowSecDriverCore(5.2.2)[F1208D07-4D35-0191-3638-3D7CA8C9D5CF ]@0xffffff7f82b69000->0xffffff7f82ba1fff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f82a4c000
dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000
dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
dependency: com.apple.iokit.IOFireWireSBP2(4.2.0)[2B060BAD-9A9B-3A52-A742-A37CDFC59570]@0xf fffff7f82b4b000
last loaded kext at 1223700924328: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f84440000, size 16384)
last unloaded kext at 1481342745694: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f84440000, size 12288)
loaded kexts:
com.pogoplug.filesystems.ppfs 2010.10.7
com.seagate.driver.PowSecLeafDriver_10_5 5.2.2
com.seagate.driver.PowSecDriverCore 5.2.2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.filesystems.autofs 3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.ATIRadeonX2000 8.0.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.kext.AMD4600Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
Early 2008 MacBookPro keyboard backlight off and fans run at high speed
Hi!
I wrote from Turkey.
My Early 2008 MacBookPro 2.40 ghz 4 gb Ram OSX Mavericks machine's keyboard backlight off and fans run at high speed; it seems an exact smc resetting problem.
So i tried the 2 ways of SMC restting procedure; both battery you can move and not, but nothings changed on the situation..
On the way for removable battery; nothing changed but on the way for umremovable battery way; keyboard backlight flashes and gone, but fans are at high speed not changed. So nothing changed.
What can i do right now? i'll wait for your advices
ThanksYour Mac may need a new PRAM battery. Once it is over 4 years old, that often is needed.
-
Resolution changed on remote display. Fan runs at HIGH speed.
Today, for no reason, resolution changed on remote display. Option needed no longer shown. Tried SMC and PRAM resets. Now resolution on the MAC AIR is messed up (not full screen) and the fan runs at HIGH speed. This is a sudden change. Have been using the MAC Air in this exact configuration for 2 years. Tried restart/reset of monitor. Nothing. Did resets on MAC and screen changed there. Also the fan runs at high speed.
Hi donaldfromsaint charles,
It seems you are experiencing an issue with displays and their resolutions. The following article provides troubleshooting guidance which may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D -
RMBP - Fans run at 5500rpm when downloading something at speed of 4MB/S from the net
RMBP - Fans run at 5500rpm when downloading something at speed of 4MB/S from the net
when i download something from the internet and the speed of the download is 4mb/s the fans start turning at the top speed and stays at that rate until the download is finshed .... it is very disturbing
is anyone experincing this ? or its only my poor RMBP??
p.s not only 4MB/S but also 5MB/S or 6MB/S or more ...
using mountion lionok if no one want to answer at least tell me if this could break my mac
Maybe you are looking for
-
Creating a USB boot image for LabviewRT
I have installed Labview 8.2 and the "update 8.2.1" for Labview RT Standard version from the web. I am trying to create a bootable image for a target Laptop PC, using a USB jump drive. When I run NI-MAX and select TOOLS->RT Disk Utilities->Create Des
-
Workaround to adding two e-mail alias accounts with same username.
I have two e-mail addresses (aliases) (for example [email protected] and [email protected]) running under one (same) username "jimmy" and the same password on the same mail server (basically one e-mail account with two e-mail address aliases). I want
-
Hi i have doubt on creating DSN in window7
I have given this path C:\Windows\SysWOW64\odbcad32.exe and i gave dsn name. when i run the database connectivity program its throw's an error ORA-06413: Connection not open. what should i do to run the database connectivity program . os is windows7.
-
Log gap detection WITHOUT Dataguard
Heys, I am looking for a solution to keep my standby database up2date. I set up the enviroment according to http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimaryRACPhysicalStandby.pdf The RedoLog Apply works fine. But how can
-
What does Master Image Offline mean?
I tried to bring up the Master Image for a particular photo and got the message "Master Image Offline" and all of my adjustment options were grayed out so that I couldn't use them. Can somebody explain what this means and how I can still make adjustm