Fan running high, Windows Vista

I - finally - have Windows Vista Ultimate running properly on my MacBook Pro. But I notice that after I use it for about 10 minutes the fan starts to run high/fast.
And solution?
thanks - Otto.

Install InputRemapper. That will insure that the fans run at a minimum 1000 rpm to keep things cool and heat doesn't build up.
Install SpeedFan to monitor the thermal sensor temps - unfortunately it doesn't automatically control fans as it should.
Otherwise, seems like something is causing system to run hot, and for me, it always took hours before I saw that before I started using InputRemapper.
http://forum.insanelymac.com/index.php?showtopic=58373&st=0
But I am not confident that there isn't more to this, like resetting the power or system management control unit or something.

Similar Messages

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

HT203687 iCloud is now no longer working with Outlook running on Windows Vista. Is this still unresolved?

iCloud is no longer working with my Outlook 2007 running on Windows Vista. Is there any resolution from Apple?

Hi,
Please check whether the issue happens when using the Outlook 2010 with Windows server 2003 SP2 to access other mailboxes, such as new created Exchange 2013 mailbox or other migration mailbox.
Since the issue doesn’t occur when using Outlook in other machine, the mailbox configuration in Exchange server side should be correct. Please
create a new Outlook profile
for the problematic user in Windows server 2003 with Outlook 2010 to have a try.
Regards,
Winnie Liang
TechNet Community Support

HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

You might want to post this over in the iTunes Match forum.

I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.

I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.

Will the latest update of Muse run on Windows Vista?

Will the latest update of Muse run on Windows Vista?

Hello
As per the new system requirements, Muse will run on Windows 7, or later with 64-bit version required.
For more information, please see the release notes here:- http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html
Regards,
Prateek

Fans run high at start up

hello, for some reason almost everytime i restart(after software updates) and shut downs and then start up. it takes a little while it takes about 20 seconds to get out of the grey apple and the spinning circle thing. but in that time the fans all in a sudden run full speed. and then after about 10 minutes of use the fans slowly come down in speed and become normal again. sometimes when the fans run high at start up you can here then run but no air comes out. do i need some canned air?

It would probably be a good idea to clean the vent, try it and see if it helps.
Miriam

Tecra M4 : Fan Speed under Windows Vista

Hi there,
after upgrading my notebook (Tecra M4, 2GB RAM, 64MB GeForce) to Windows Vista, the Fan (on the left side) seams to run permanently - right after booting Vista. Of course, I have installed all current drivers and tools and the newest BIOS (3.30).
I also tried to optimize the Power settings in Vista. Here I finally found the "new" Toshiba PowerSaver (btw: the old PowerSaver Tools in XP are much better!!).
- Somthing I noticed: If I set "Cooling Method" to "Battery optimized" the fan will stop for a while, but I think that this is not the solution??
The CPU temperature is about 43C (checked with Notebook Hardware Controll), but RivaTuner says that the GPU Ambient Tempature is about 127C (which I cannot believe because GPU Core Temperature is "only" about 62C). But also 62C is quite high for the GPU - issn't it? (it only has to display Vista's Aero Glass)
So I think my Problem is the GPU (temperature, driver, ...?)
Any solutions on this - or is the solution switching back to XP?

I just had to have my main board replaced because the video went dead (nvidia 6600 128M).
My problem started very similar, the main CPU fan would run more than it should have.
What I discovered was:
1) Even when the air fins are clean and clear as viewed from outside the PC, it is in fact 40% blocked on the fan side.
2) The second fan sitting on top of the video chip set was clean and didn't run often enough. This was later found to apparently be related some how, to the fact that the heat sink on the video was totally dry (no thermal grease ever applied).
Now with the new main board and all the fans clean (and grease on sinks), the PC runs quiet and the fans run occasionally. The PC is noticeably much cooler when placed on my lap for long periods of time.

MacBook fan running high most of the time after HDD/Hard-drive Upgrade

Hi guys,
I've just recently upgraded my MacBook white's (MacBook5,2, 2GHZ duo core, 4GB ram) stock harddrive to a WD 2.5" black 750GB. After which, I noticed my macbook fan running at high speeds majority of the time... Even when just doing light weight stuff on it, such as surfing the net using Safari or even just leaving my computer idle after startup.
I did a clean install twice, the second was too see if it was really just a badly installed OS, but the problem still persisted, well at least till I decided to come here to type the post =P (maybe my macbook's scared about being talked about). Do note, that I did a pc migration each time.
After the upgrade, My fan usually runs at about 5000-6200 rpm, but right now as I'm typing this post, its surprisingly alot lower then what I've been experiencing. About 3000rpm-4000rpm.
As for the harddrive temperature, I noticed it runs between the 37 degree to 40 degree celsius range, so I'm guessing the hard-drive temperature sensor isn't busted, which was the problem for others from what I've read from other discussions here.
Also, when I boot my windows partition, the fan doesn't go as crazy, but it eventually will too.
Any idea what the problem could be? =s Or could it be that my MacBook can't handel 7200rpm hard drives =/ If so I'd probably downgrade to a 1TB WD blue =s
On top of that, does any one know if the 2.5" WD blue are as reliable as the 2.5" WD blacks? As I'm heistant to downgrade as I've read that the blues have a higher failure rate, and wouldn't want that happening. Oh and I'm not considering an SSD for this particular MacBook at the moment, as I may upgrade in another two years or so!
Thank you!
Edwin

Hey Mende1,
Well I guess I'll try returning the drive at the end of this week then my fan seemed to have slowed down abit since the upgrade, it's sorta spinning around 3000rpm now. I'm not sure if it's gonna be the same thoughout, and I'm pretty sure it doesn't spin as much as it did when I had my old HDD on. So I'm giving it a few more day probably till the end of this week. And if the noise issue still surfaces I'll try a different hard drive! and update you on the results!
Thanks alot Mende1!
And hello there rauldoppler!
Well, firstly, I'm using a early 2009 MacBook white! The pre-unibody one. It's running on a 2GHz Intel Core 2 Duo processor with 4GB for ram.
As for the hard-drives, I'd actually reccommend you to upgrade to an Solid State Drive if you can afford it, but if you're like me who needs more memory space then boot speed etc, I guess a HDD will be fine =) As for which brand of hard-drives, I would actually recommend WD (their black drives especially, 5 year warranty, 7200rpm speed hehe), but right now I'm having the fan problems, so I'm not too sure anymore.
I did however, do quite abit of digging around on the net and concluded that WD was a better choices amoungst the rest... But yeah the fan issue is still something I didn't expect. All in all, I guess as for which drive is better, it really depends on your needs or wants, if it's for casual internet surfing and stuff, a WD blue HDD would be fine, or a black if you want a slightly faster boot speed etc at the expense of your battery life and all. If you however value blazing fast boot times and application start up times, go for an SSD. If you need the memory space more then anything then I'd say go for a HDD again too, as it's cheaper interms of gigabite to dollar ratio. (for example, the older 500GB version of my new WD black would cost USD $43, while a Samsung 500GB SSD Pro would cost $349) Also, You could do abit of reading up on SSDs if you're interested in it There's alot of plus points to it, like ALOT, and if the price tag wasn't so huge, I would have used it for my macbook already!
Lastly, I used a WD Black 750GB for my macbook upgrade. However, I'm gonna downgrade to a WD blue 1TB this weekend if the fan doesn't settle down over time Cause well, the fan noise is really an issue for me.
Peace out guys!
Edwin

Live! Cam Voice won't run on Windows Vista 64-bit OS

I recently upgraded my OS to Windows Vista Home Premium 64-bit system. I downloaded the beta softwares (webcam driver & cam center) for my Creative Live! Cam Voice & everything looks fine until I run the Creative Live! Cam Center. Right after running the Cam Center & clicking Start it says initializing then my PC screen turns blue with several error message in it. My webcam also doesn't seems to work.

I am having a problem downloading to a new Windows Vista 64 machine. When I download using either IE or Firefox, the download gets to 14.7 MB and stops. Any ideas on why the download will not work?

How can I stop Foxfire from automatically loading when I turn on my computer that runs on Windows Vista?

Foxfire automatically loads when I boot up my computer after all the other essential programs boot up. I'd like to know how to disable the start-up menu link that allows the program to load up when the computer first starts up because the Foxfire browser isn't needed when I first start the computer. Besides, when I first start my computer, it's inevitably not hooked to the internet and it's just a bit annoying to see foxfire load when it's not needed. Furthermore, it takes up precious memory in the RAM when it's running, thus slowing down my machine. Please, someone show me how to keep this program from booting when I start up my computer. By the way, my system is Windows Vista and Foxfire does not show up in the start-up folder. Only by going to the default program page and clicking on Foxfire does it show that Foxfire has a hidden default that makes it start when the computer starts. All I'm looking for is to not see it when I boot my computer.

Thanks for pointing me to the link about the startup programs changes. I found the solution there. Foxfire was hiding in the hidden startup menu. Once I found it using msconfig, I was able to stop it from loading when I started my computer. Again, thanks for the help.

ITunes does not start run on Windows Vista at all

I've been using iTunes on Windows Vista for about six months. A couple of weeks ago it stopped running: I run the program, see the animation-formerly-known-as-hourglass for a couple of seconds and then - nothing. I can see iTunes in the process list, but nothing happens nor can I shut it down (it does nothing when I try to shut it down).
I've tried uninstalling and reinstalling, but that does not help. The program did run on another user account, so this is probably related to my profile. I tried moving the two iTunes profile folders I saw listed somewhere (can't find them now), but that did not help.
Yesterday, I got a pop-up saying there's a version 7.5 available. I installed that, and much to my surprise it ran normally - once. After that one time it again refused to do anything more than what I wrote at the start.
So what gives? Should I throw my iPods into the nearest lake?
Any hints on how to solve this frustrating issue will be greatly appreciated.

I've tried everything I can now. I've uninstalled everything that has anything to do with iTunes, then reinstalled (as per the relevant article). I've even tried installing an older version, but no. Whenever I try to run iTunes, it shows up in the processes - and can't be terminated except by shutting the computer down - but does not open.
It still seems my only option is to throw my two iPods into the lake. This is infuriating.

Problems with iTunes and iPod running under Windows Vista

I recently changed my computer. I now have an HP Pavilion running windows Vista (use to have XP). I have a video iPod -30GB. I downloaded iTunes onto the new equipment without incident, but that is the last thing that went smoothly.
I can no longer watch TV shows or movies from iTunes. The video plays like a slide show of stills (the audio is real-time however). Eventually I will get an error message from Windows and it closes the application.
I am also having issues with syncing my iPod and computer. I get a message requiring me to delete all of the content of the iPod and replace it with the contents of iTunes. I haven't done this -no trust and no backup
The delete message is from iTunes. I suspect it is a security feature to prevent downloading to more than one iPod, as iTunes doesn't seem to 'know' my iPod anymore. Syncing has also caused iTunes to close and my computer to reboot. Has anyone else had these problems?
HP Pavilion Windows Vista

you may want to take a look at the iPod 101 tutorials. Those might help.
Regards.
< Edited by Host >

Fan running high, Windows Vista

Similar Messages

Maybe you are looking for