Fan speed does not change

Here's my problem. I'm using a P4 2.6C (stock HSF) on a MSI 648F neo motherboard and the cpu fan's speed stays at a constant 3125 rpm (max?) even when the system and cpu temps changes (idle & load). I'm using BIOS to monitor my hardware. Intel says that their stock fan has an internal sensor so that the fan's speed can vary depending on cpu and system temps. Speedfan also dosen't change the fan's speed even when I think I configured the right settings. Only corecenter when started (auto mode) was able to vary the fan's speed based on
the temp readings. What's wrong?

Quote
Originally posted by artic
Just installed speedfan. You need to adjust the desired cpu and system temp. If you set the fan speed automatically, it will automatically adjust depending on your desired temps. To test this, try making your desired temp to 60C and then see how the fan speed adjust automatically. You can see the fan speed go below 100%.
I had the same problem a while ago, Artic's solution worked for me.

Similar Messages

CPU heats up on file copy/backup and fan speed does not increase

Hi Friends,
I have been having issues with fan in my Dell Studio 1555. It has an ATI Radeon card and I had installed the proprietary catalyst driver as the open source driver is too noisy.
Recently, I noticed that on accessing my hard disk and copy files or running backup (luckybackup), the temperature shoots up from around 60 deg C (just using chrome) to 100 deg C when it would shut down itself. However, it seems like the fan speed does not increase with the increase in temperature to help it cool down.
I tried to get the fan speed details with "lm-sensors" but it would not show the fan speed. Here is the output of sensors:
[user@domain]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +60.0°C (crit = +100.0°C)
temp2: +59.0°C (crit = +100.0°C)
temp3: +66.0°C (crit = +100.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +58.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +58.0°C (high = +105.0°C, crit = +105.0°C)
Following the Arch wiki, I added acpi_enforce_resources=lax to kernel parameters but it did not help as well.
Here is the main problem:
1. CPU temperature shoots on accessing hard drive but fan speed does not increase - Any guide/direction to investigate would be really helpful.
2. Sensors does not show the fan speed. Read about i8kutils, but couldn't figure out how to get it working with systemd. Any indicators here?
Last edited by ravisghosh (2013-07-01 05:22:01)

luuuciano wrote:Ravi, did you solved it?
Im having similar issue on a vostro 1710, fan never works... :-/
The fan was bad. I had to replace the fan. However, I have not been able to figure out how to see fan speed in sensors.
Last edited by ravisghosh (2013-09-08 15:57:37)

MB990 and SL - Fan speed is not increasing automatically

Hi Guys,
Two days ago I changed my macbook's hard drive to a bigger one and did a fresh install of Snow Leopard.
As soon as I installed the SL I noticed my computer was running hotter than the previous installation. Without doing anything, my macbook is reaching 75C (167F).. I have already checked the activity monitor and no process is using the CPU. Now I realized that the fan speed is not increasing automatically, it is always fixed at 2000rpm even if the temperature reaches 72C.. I have already tried a SMC reset but the problem persists..
Does anyone know a solution for this? The problem is the fan speed that is not increasing..
I'm having to use smcFanControl to control de fan speed manually. Before the fresh install I was using Snow Leopard updated from the Leopard and I was not facing this problem.
Thanks a lot!

Hi there... i have the same problem. my temperature gets up to 75C with just one window open in safari or google chrome. I have downloaded smc Fancontrol but ...its not enough. have u solved this problem yet? i'm going in to the Genius Bar tomorrow to see if they can help.

The Fan option does not appear for folders in the dock.

The fan option does not appear on folders on the Dock. Stack option is checked, but all I get is grid list and automatic....running 10.5.2
any ideas?

Not that I know of. When on the side no fan for folders and no 3D look, which I prefer. Background of the Dock very dark so the white dot showing an app is open is easy to see and it all looks very sophisticated.
You might check with third party apps to see if anyone is changing that, but most people don't like the fan so I doubt if anyone is working to add it in.

Changing animation frame rate when rendering in photoshop does not change the length of the video?

I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

Tables are deleted but database size does not change in sql server 2008r2

Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.

Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

try using a different browser, or contact support Contact Customer Care

ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

Calendar (not called iCal anymore) does not include that capability any longer, apparently. What you have to do now is go to Automator and create a Calendar Alert action. You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

Tabset in page fragment , the url does not changes when we select tabs...

Hi
Thank you for reading my post.
i noticed that when we use a tabSet in a page fragment , selecting tabs does not change the current URL ,
is it a correct manner ? I think when we select a tab and it opens another page the url should change.

HI,
There is a relevant topic on EA discussion.
Topic :TabSet in page fragment , selecting a tab open a page but does not change the current browset url
https://feedbackprograms.sun.com/project/forum/thread.html?cap={3F4DA363-16D3-4D4C-920C-992ECB054B6D}&forid={CC6B8562-F896-4A44-ACB6-4684BDD05E19}&topid={361DBDF0-FFDE-4618-9FC6-86E4903A9565}
Hope this helps.
Please post messages related to Creator 2 EA at the feedbacks programs portal. The URL is:
https://feedbackprograms.sun.com/login.html
Thanks,
RK.

Fan speed does not change

Similar Messages

Maybe you are looking for