Fan speed | SPLIT

I have the same problem,with the same video card,can't go lower than 40% in MSI Afterburner and is still very loud,in games i can't even play without headphones on.
I've read about changing BIOS but i dont know how to do it.

Hi,i already said,i mean in the other thread.
I have a GTX460 ,this one http://www.msi.com/product/vga/N460GTX-M2D1GD5-OC.html
All other system specs if needed:
MB: MSI 770-C45
CPU: Phenom II x4 955 BE
GPU: MSI N460 GTX OC 1GB 256bit DDR5 PCI-E
RAM: 7 GB DDR3 1333 (A-DATA Gaming Series)
HDD: 2x 500GB Samsung S-ATAII
Power Supply: Sirtec 500W
OS: Windows 7 Home Premium x64

Similar Messages

MSI KT3 Ultra ARU 2 fan speed controlling

Hi, i'd like to know if is it possible to control the fan speed via software with this motherboard. I've try with Speedfan, but it seems to have no effect :( .
Suggestions?

Hi,
Sorry, it's not possible.

K9n Platinum fan speed control

Hi!
I have the following configuration:
-Motherboard: MSI K9N Platinum v1.1
-Bios: AMI v1.3
-CPU: AMD Athlon 64 X2 Dual Core)
-CPU cooler: Artic Cooling Freezer 64 Pro
-Memory: Kingmax 2*1 GB
-Video card: MSI NX7600 GT
-Power Supply: Antec NeoHE430 430W
-Hard Drive: Samsung 250 GB SP2504C
-Operating system: Win XP Pro SP2
I would like to control the speed of the CPU fan automatically, according to the temperature.
I tried
-the Dual CoreCenter utility from MSI, but it allows me only check the speed manually (If I did not miss anything)
-control from BIOS HW Monitor setting SmartFan but it does not work at all. ( Iam not sure but this can be because my cooler, it has 3 pin connector, and th MB user guide tells it works only if I use 4 pin connector. Can you confirm this?)
-Speedfan 4.31, it seemed working, but the system become instabile. I check the programmers site, and this MB did not supported.
Do you have any suggesions, experience about controlling the CPUfan?
Thank you in advance!
T.

Thank you for the answers.
Unfortunately the smartfan feature is not working in my case.( set to 3-pin in BIOS) I asked the MSI Technical Support and they said:
As this motherboard includes 4 pins connector for cpu fan, the 4th pin is used to controlled cpu fan speed, if you use 3 pins fan, fan speed will not be changed automatically and smart fan will not function.
I feel a small contradiction here
Do you have other ideas other than smartfan and speedfan?
T.

Yoga 2 13 - Fan speed goes almost silent in tablet mode

I find that the fan generates too much noise on my Yoga 2 13 (not pro), even when the laptop is completely idle.
It seems that somehow the temperature threshold for triggering the fan is set a bit too low (same problem seen on the lenovo yoga first version)
However, I noticed that when I fold my Yoga into tablet mode the fan goes almost silent (which is awesome).
Am I the only one experiencing this issue ?
Is there maybe a way to set the fan speed in laptop, tent and stand mode at the same speed as in tablet mode ?
Any help would be greatly appreciated.
Regards,
Mat.

I was going to reccomend you use the Notebook fan control program, and I went to go find you a link for it. However, when searching for it, I discovered that the Notebook fan control program doesn't work for the yoga 2 13 although it does work for my yoga 13. It seems to be because the yoga 2 13 only has one fan while the yoga 13 has two fans. I'm not sure.
The best bet for you is to search around on forums to see if anyone has discovered a different program that works. I tried searching around but I couldn't find anything.
check at these two sites:
http://forum.notebookreview.com/ideapad-essential/755553-yoga-2-13-any-fan-control-software-works.ht...
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-13-non-Pro-Incredibly-loud-and-ru...

Dc5850 cpu fan speeds to top speed sys then shutdown

I have a Hewlett-Packard HP Compaq dc5850 Micro tower PC, now running windows 7 pro 64-bit. That was new in late 2008. Originally it came with vista 32-bit downgrade able to XP pro 32 bit, running on 2G RAM, and 160G C drive with a 2.30 gigahertz AMD Phenom 8600B Triple-Core processor. It also has ATI 3100 integrated graphics as well as integrated NIC at 1G and integrated High def audio. In the first few months I had the system, I upgraded memory by 4G and total Disc space by 500G by adding a D drive; then upgraded to windows 7 pro 64-bit.
Overall, I have had a good experience with the PC but it has had problems while in its 3-year warranty. I did need to replace the C drive and later it original RAM devices. Yes HP did these replacements and swaps, under warranty; that meant I had 6G memory for a long time before the HP 2Gig failed out of warranty, leaving me with 4Gig now. Yes I have always had the Unit on an UPS; I even replaced the old UPS with a more powerful unit in late 2009 or early 2010 when the old UPS showed signs of failure. Now instead of serial based UPS connection it is USB.
Over the last few months I have been getting blue-screen errors of all sorts. Ranging from video related errors, Memory faults, Disc read/write failures and processor flag errors too. After numerous repair disc runs or re-install of windows, the disc read write errors wore corrected by the HP drive sanitation utility disc repair/wipe after failing the extended test. The non video ram was tested by a bootable CD of memtest86 v4 running extended test as well as MS memory Diagnostic. Both run multiple times, both passed multiple times. I was able to find a CD based video diagnostic for ATI and the Video passed repeated stress test as well. Over Labor Day I conducted these test and re-installed windows 64-bit; on the following Monday windows informed me I needed to activate windows, so I verified the correct key and called to do so, successfully.
With that background given here is the question. Recently over the last two or three months, for no apparent reason, mainly on boot the fan races to top speed and the system shuts down to protect itself. I researched this a little and found one cause to be inadequate airflow over the CPU to keep it cool; the recommendation made sense to vacuum with a computer vacuum and be sure airflow is not somehow obstructed. I am now thinking all these problems are related to the CPU temp sensor. Is it on the CPU fan or the motherboard, and can raising the fan speed in BIOS help prevent the problem, particularly if it on the motherboard.
John M Gray II

My pentium 4 3.0c stock Intel fan is 4.44 watts. Isn't the mobo designed for this?
Also, can the sys fan header have the speed sensor activated by a bios fix or is it a hardware issue where it just does not exist? If hardware, seems strange since Corecell shows sys fan.
Regards

IMac (Late 2006) fan speed is 4600 rpm and nothing will change it

I just brought my iMac 24" 2.16GHz Late 2006 back from the Apple Store today and the ODD fan is running at 4600 rpm!!! The noise it generates is way too loud. It is comparable to the wind tunnel G4 I replaced. Any thoughts on how to lower the fan speed?
I took the iMac in on 12 Sep to repair microphone and video crashes. They repaired the mike and replaced the video card with an NVIDIA GeForce 7600GT. I picked it up on 3 Oct.
I have SMCFan and iStat Pro installed to monitor and adjust the minimum fan speed. I tried the usual troubleshooting steps (e.g., reset PRAM, Safe Boot, ran troubleshooting utilities, etc. to no avail.
bill

David,
Looking through my old posts to refresh my memory, my face is red as *I AM* mistaken:O
http://discussions.apple.com/thread.jspa?messageID=4064287&#4064287
I was recalling that Intel iMac users were doing the wrong SMC result three years ago (actually they were doing the SMU reset that was for the pre-Intel G-5 iMacs), and that you and I explained to them the correct way - which is of course what you recommended above:D
Nevertheless, since there is no further risk of causing the fans to race in this instance, I would myself do the wrong SMC reset method, and if it does not work, turn right around and do it the way Apple recommends. This still might result in correcting the problem.
By the way, it was widely reported three years ago that the SMC reset was frequently not successful on the first attempt, so the alternative is to try this harmless procedure at least several times before giving up on it.
Message was edited by: myhighway

Lenovo G560 overheating. Need tips on fan speed control

When I am watching movies on my G560 laptop, the area to the left of my touchpad is getting very hot and the laptop is shutting down at times.
When I bought my laptop I used to hear fan noise, but I have noticed recently that I do not hear the fan any more. I was wondering of there was a way to check the fan speed and manually alter it.
The warranty on my G560 is running out with in a month or so, a quick response would be appreciated.

the cpu greece tests over the years are the most bunch of snake oil i ever seen.
one review site did a test with 50 and used choclate and fingernail polish to show most are complete waste of money.
compaq builds junk.
lenovo dose not.
the real reason is the notebook makers dont even built the latops.
there like 3 companys that make 90% of the worlds notebooks and pc.
you never even heard of them either.
they make the sonys,acers and so on in a plant on a line with dozens of brands.
just like the way foxconn makes the apples these are huge companys that make the products per instruction of the notebook brand.
notebooks are not like desktops one bit because they are in a tiny space where heat puts a curse in the board.
when you release this you release that spot.
the part of contact for a cpu die is really tiny so it dont have to make the same contact point as cpu cooler.
cpu coolers of notebook are well designed unlike the desktop cooler they make very good contact.
discrete graphics is another story most of all on compaqs with they used a very bad design and had majior issues with.
trust me there no such issues with lenovos because they use a good company to make there notebooks and they also use a good design.
the fan noise issue well that was more of a watch out for sandy bridge issue as sandy bridge can be a very hot chip.
undervolting the chip makes a huge difference in heat as it comes with no performance loss.
it also dont change the way the cpu sits.
when the cpu was mated to the motherboard it perfict that day.
when you pull the cpu now it never fit the same exact way as it has been stressed over time by the tourqe and the heat.
pulling it will effect the fit.
most people dont have the skill to change the greece on a cpu because they will use to much and unlike a desktop cpu that has no open transistors on the surface the mobile cpu dose.
they will add too much and it will run and short out them.
look at a pic of a mobile cpu and then a desktop cpu.
a very different design.
what you telling people is a skill they dont have because they have no idea that a simple mistake will cost them hundreads of dollers.
notebook cpu run 200-300 dollers and some 500 bucks.
pulling the cpu heatsink will effect it natural fit because it under tenion.
i know this because i know metals well and i have 20 years of experence in this area.
i alos worked for a company long ago that made robots for the waffer cpu come from.
i think some people think they might know a quik fix because they built a pc before but notebooks are very different.
i do custom notebook setups for people up here in boston who are willing to spend more on my labour then most notebooks cost.
when i set up a pc it takes me 4-6 hours normally thats a standard win 7 time with all security and services adjusted complete.
people pay for my services because they get longer run times and they stomp anything even notebook makers that charge thousands for custom setups.
if i thought putting snake oil on a cpu would lower temps i would do it just for the lower fan noise and power use it would save.
i know the moment i release the heatsink i never recreate the same exact fit it had under the stress that time made and the point of contact metal to metal will allways be better then if you add silicon to it.
most people dont get that more then a pin head will be more then enough because more then that will cause a heat barrier and lower that.
there whole point to thermal paste is to fill graps in the metal that are from the lapping process.
it not to help cool it like some think.
no thermal paste will ever work better then a pure magnetic grip of metal to metal.
infact if you machine two blocks perfict they stick to each other as if they were magnets.
tourqe them and add heat and they never do that again.
that why latops heatsinks i feel are much more different them desktops one and what most people dont grasp.
dont belive me call your high school science teacher and he explaine why to you.

Change fan speeds on Lenovo G560?

Hey there, I'm wondering, is it possible to manually change the fan speeds on this laptop? When I'm rendering a video in Sony Vegas it heats up my laptop and I'm just wondering is there a solution other than laptop cooling pads?

as i know, controlling the fan is not possible for this serie of lenovo.

How can I control fan speeds in Win7 on a MBP-R for gaming?

I have a MacBook Pro with Retina Display. It has had Windows 7 installed and I want to play some 3D action games. How do I stop internal parts from overheating? I intend to use a USB cooling pad but that'll do nothing if the internal fans remain at idle speed.
The only Windows fan speed control utility I could find was the 4-year old SpeedFan which fails to detect the presence of any internal fans. I'm not impressed with the Windows community's failure to offer more and better than this tired old relic.
So the questions remain:
(1) Is the hardware still capable of automatically accelerating the fans as temperatures rise while gaming in Windows?
(2) What In Windows forces the MBP-R to lock the nVidia GPU into continuous duty and ignores Intel GPU?
(3) What control does the user have for (2)?
(4) How can I protect my MacBook Pro/Retina from overheating while playing PC games, apart from not playing games?

Moved from the Creative Cloud to the Lightroom forum. They will be able to help you here.

How can I control my fan speed?

How can I control my fan speed on my macbook pro? I use SMC for gaming and streaming video from the internet when using my Mac OS, but I partitioned my drive and installed Windows 8 in order to play a different game (not a huge game) and the computer heats up dramatically when playing on Windows through Boot Camp to the point that it freezes every time (it never does this when playing a mac game or streaming on the normal partition Mac OS).
Any suggestions or programs to control fan speed of the mac from windows?

Get a cooling pad. That will much better than trying to constantly adjust fan speeds.
Ciao.

Tweak the balance between fan speed and CPU temperature / Dell M6400?

Hi all,
I have a Dell Precision M6400 17" laptop. It runs really well on Arch, but is a bit noisy. It has always been noisy, btw, but I recently noticed that the CPU fan was blowing a lot of air even though the CPU temperature is lower than 70°C. I also have a macbook air, and its CPU runs at 70°C all the time, which seems to be normal. I would like my m6400 to behave similarly, and I'm sure someone here know how to change that
Hardware configuration
* Intel(R) Core(TM)2 Extreme CPU Q9300 @ 2.53GHz
* Quadro FX 2700M (G94M)
* 8Go RAM
* 2 hard drives
lspci output
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G94M [Quadro FX 2700M] (rev a1)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
output of sensors, idle:
acpitz-virtual-0
Adapter: Virtual device
temp1: +45.5°C (crit = +107.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +51.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +51.0°C (high = +105.0°C, crit = +105.0°C)
Core 2: +48.0°C (high = +105.0°C, crit = +105.0°C)
Core 3: +46.0°C (high = +105.0°C, crit = +105.0°C)
output of sensors when I start interacting (light browsing, mail, chat):
acpitz-virtual-0
Adapter: Virtual device
temp1: +59.5°C (crit = +107.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +63.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +63.0°C (high = +105.0°C, crit = +105.0°C)
Core 2: +62.0°C (high = +105.0°C, crit = +105.0°C)
Core 3: +63.0°C (high = +105.0°C, crit = +105.0°C)
When I start the laptop, its CPU fan stays at its minimal speed only for 1 or 2 minutes, then increases its rotation speed to a second level. It reaches it maximal speed only under heavy load, when the CPU reaches >80-95°C. I would rather let the CPU run a bit hotter before the fan starts to blow: let's say the fan could enter its intermediary speed between 70°C and 85°C instead of 55-80°C, and blow at is its maximum speed beyond that.
I checked the Fan Speed Control wiki page, but lm-sensors is not able to show me the status of the fans. Any idea ?
Aurel.
PS: the temperature of the GPU is not reported by sensors, and nvidia-settings reports around 60°C. Its dedicated fan is very quiet.

aurelieng wrote:
Hi all,
I have a Dell Precision M6400 17" laptop. It runs really well on Arch, but is a bit noisy. It has always been noisy, btw, but I recently noticed that the CPU fan was blowing a lot of air even though the CPU temperature is lower than 70°C. I also have a macbook air, and its CPU runs at 70°C all the time, which seems to be normal. I would like my m6400 to behave similarly, and I'm sure someone here know how to change that
Hi aurelieng,
I'm in the same situation from at least 1 month ( INTEL CORE 2 EXTREME X9100, 3.06GHz with 8GB ram, one solid state disk 128 GB, and one sata disk 500GB)
My dell M6400 has dual boot: ubuntu and windows7. The fan works a lot and continuosly in both environment and this is the reason because I have doubt that the origin of the problem is in hardware problem?
output of sensors when I start interacting (light browsing, mail, chat):
acpitz-virtual-0
Adapter: Virtual device
temp1: +41.5°C (crit = +107.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +41.0°C (high = +105.0°C, crit = +105.0°C)
Last edited by ginard (2012-11-16 18:09:19)

Unusual Fan-Speed (up to 6200rpm @ 92°CPU), MBP 2011/ OSX 10.10.2

Dear Community,
I've got a problem with my MacBook Pro (late 2011) [2.4 Ghz/ 16GB RAM (upgraded)/ 256 GB SSD (upgraded)/ 500GB HDD (internal, upgraded (instead of DualDrive, iFixit-slot)).
Since last week I am observing that the fan of my Macbook revs up pretty high and pretty quickly up to 92° CPU temperature @ 6200rpm of the fan according to iStats Pro. This can happen in idle as well as load of any kind. I already cleaned the fan. Never experienced it before. Pretty unusual behaviour.
Do you have any suggestions/ guesses/ tips/ help for me? Thank you very much in advance.
Here's a copy of an (Etre)Check that I just recently ran. Hopefully it helps:
EtreCheck version: 2.1.8 (121)
Report generated 17 Feb 2015 09:56:42 CET
Download EtreCheck from http://etresoft.com/etrecheck
Hardware Information: ℹ️
    MacBook Pro (13-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 204
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
        S273HL spdisplays_1080p
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:14:0
Disk Information: ℹ️
    M4-CT256M4SSD2 disk0 : (256,06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 254.87 GB (32.70 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 255.20 GB Online
    ST9500325ASG disk2 : (500,11 GB)
        EFI (disk2s1) <not mounted> : 210 MB
        Boot OS X (disk2s3) <not mounted> : 134 MB
USB Information: ℹ️
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Logitech USB Laser Mouse
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hidhook (8.0 18619.1001606) [Click for support]
    [not loaded]    com.parallels.kext.hypervisor (8.0 18619.1001606) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (8.0 18619.1001606) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (8.0 18619.1001606) [Click for support]
    [not loaded]    com.parallels.kext.vnic (8.0 18619.1001606) [Click for support]
        /Applications/Tunnelblick.app
    [not loaded]    net.tunnelblick.tap (1.0) [Click for support]
    [not loaded]    net.tunnelblick.tun (1.0) [Click for support]
        /System/Library/Extensions
    [loaded]    com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Click for support]
    [not loaded]    com.caiaq.driver.NIUSBMaschineControllerDriver (2.5.2 - SDK 10.7) [Click for support]
    [not loaded]    com.cisco.nke.ipsec (2.0.1) [Click for support]
    [not loaded]    com.maudio.usb.fasttrack.driver (1.8.2) [Click for support]
    [not loaded]    com.native-instruments.driver.NIUSBDeviceHelper (1.0.8) [Click for support]
    [not loaded]    com.wdc.driver.1394HP (1.0.9) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.0 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.11) [Click for support]
    [not loaded]    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
Startup Items: ℹ️
    M-AudioFastTrack: Path: /Library/StartupItems/M-AudioFastTrack
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.avira.antivirus.general.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.ipm.ui.plist [Click for support]
    [loaded]    com.avira.antivirus.notifications.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.odscan.default.plist [Click for support]
    [loaded]    com.avira.antivirus.scheduler.agent.plist [Click for support]
    [running]    com.avira.antivirus.systray.plist [Click for support]
    [loaded]    com.avira.antivirus.telemetry.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.update.default.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.avira.antivirus.dbcleaner.plist [Click for support]
    [failed]    com.avira.antivirus.ipm.loader.plist [Click for support]
    [running]    com.avira.helper.watchdox.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    com.sibelius.sari.plist [Click for support]
    [loaded]    com.sibelius.sibelius6.plist [Click for support]
    [loaded]    com.wuala.WualaFS.KextLoaderHelper.plist [Click for support]
    [loaded]    org.cindori.AuthHelper.plist [Click for support]
    [loaded]    org.cindori.TEAuth.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.google.GoogleContactSyncAgent.plist [Click for support]
    [loaded]    net.tunnelblick.tunnelblick.LaunchAtLogin.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Scorch: Version: 6.2.0 [Click for support]
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
    WOT
    Ghostery
    Blur (Formerly DoNotTrackMe)
    Twitter Disconnect
    Google Disconnect
    Facebook Disconnect
    AdBlock
    JavaScript Blocker
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GPGPreferences [Click for support]
    Java [Click for support]
    M-AudioFastTrack [Click for support]
    Native Instruments USB Audio [Click for support]
    Xmarks for Safari [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 254.87 GB Disk used: 222.17 GB
    Destinations:
        Time Machine [Local]
        Total size: 1.50 TB
        Total number of backups: 14
        Oldest backup: 2014-10-28 14:02:40 +0000
        Last backup: 2015-02-15 19:01:58 +0000
        Size of backup disk: Excellent
            Backup size 1.50 TB > (Disk size 254.87 GB X 3)
Top Processes by CPU: ℹ️
         8%    WindowServer
         1%    avguard-ondemand-mgmt
         0%    configd
         0%    fontd
         0%    savapi
Top Processes by Memory: ℹ️
    533 MB    Safari
    412 MB    softwareupdated
    361 MB    savapi
    326 MB    avguard.bin
    206 MB    com.apple.dock.extra
Virtual Memory Information: ℹ️
    9.62 GB    Free RAM
    4.27 GB    Active RAM
    1.30 GB    Inactive RAM
    1.99 GB    Wired RAM
    2.28 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 17, 2015, 09:45:07 AM    /Library/Logs/DiagnosticReports/NotificationCenter_2015-02-17-094507_[redacted] .cpu_resource.diag [Click for details]
    Feb 17, 2015, 09:44:47 AM    /Library/Logs/DiagnosticReports/rpcsvchost_2015-02-17-094447_[redacted].cpu_res ource.diag [Click for details]
    Feb 17, 2015, 09:41:50 AM    Self test - passed
    Feb 15, 2015, 08:00:51 PM    /Library/Logs/DiagnosticReports/???_2015-02-15-200051_[redacted].cpu_resource.d iag [Click for details]
    Feb 15, 2015, 07:50:40 PM    /Library/Logs/DiagnosticReports/???_2015-02-15-195040_[redacted].cpu_resource.d iag [Click for details]
    Feb 15, 2015, 07:48:59 PM    /Library/Logs/DiagnosticReports/???_2015-02-15-194859_[redacted].cpu_resource.d iag [Click for details]
    Feb 15, 2015, 05:43:19 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-02-15-174319_[reda cted].crash
    Feb 15, 2015, 04:37:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookUIHelper_2015-02-15-1 63753_[redacted].crash
    Feb 15, 2015, 11:23:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-15-112305_[redacted].crash
    Feb 15, 2015, 11:03:59 AM    /Library/Logs/DiagnosticReports/openvpn_2015-02-15-110359_[redacted].crash
    Feb 14, 2015, 03:43:48 PM    /Library/Logs/DiagnosticReports/???_2015-02-14-154348_[redacted].cpu_resource.d iag [Click for details]
    Feb 14, 2015, 03:39:05 PM    /Library/Logs/DiagnosticReports/mdworker32_2015-02-14-153905_[redacted].crash
    Feb 14, 2015, 03:38:55 PM    /Library/Logs/DiagnosticReports/mdworker32_2015-02-14-153855_[redacted].crash
    Feb 14, 2015, 03:38:45 PM    /Library/Logs/DiagnosticReports/mdworker32_2015-02-14-153845_[redacted].crash
    Feb 14, 2015, 03:38:35 PM    /Library/Logs/DiagnosticReports/mdworker32_2015-02-14-153835_[redacted].crash
    Feb 14, 2015, 10:36:31 AM    /Library/Logs/DiagnosticReports/openvpn_2015-02-14-103631_[redacted].crash

Thank you very much for your answer, OGELTHORPE.
I actually did reset the SMC several times the last few days and also observed unusual behaviour by the use of the Activity Monitor – with no result.
The CPU temperature as well as the fan speed can be at a top level without many processes at all. Happened right before I posted my question just after the last start of the system. Of course it also happens when I run a whole bunch of applications, but even in that case it differs. Sometimes it goes up, sometimes it's totally normal. That's why I called it "unusual".
Any further ideas besides the SMC reset?

Xorg 1.6, nivida drivers, and fan speed

I know the older nvidia drivers are not compatible with the new xorg, nor the nvidia-utils as I tried and found out!
I have 2 issues with this pc: I have a 6800gt nvidia card and the fan is constantly near 100% or close enough! I tried to install and run nvclock but it wont change the fan speed for this 6800 model. My xorg is below but I am not sure the drivers are working too good as the glxgears are only 140fps! I have a an older laptop with a smaller graphics card getting over 1000 fps!
NOW, before anyone gets excited I know glxgears is not the "best" benchmark, but its a decent one and accurate enough that I wont go from 140fps using it to 1000 fps using a similar bench.
I also tried to update the driver to the nouveau-drm driver but not sure if its installed or how to get it loaded in xorg. Any suggestions on these 2 issues?
Section "ServerLayout"
Identifier "X.org Configured"
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "dri2"
Load "dbe"
Load "record"
Load "glx"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "True"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Option "ConnectedMonitor" "DFP"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV40 [GeForce 6800]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0
SubSection "Display"
Option "TripleBuffer" "True"
Viewport 0 0
Depth 24
EndSubSection
EndSection
#Section "ServerFlags"
# Option "AutoAddDevices" " False"
#EndSection

Any suggestions on this nvidia issue?

Mac mini slow and high fan speeds

Hello! I have a 2011 mid range mac mini and love the machine, however I have noticed a few things. First off, it seems to be a bit on the slow side when multitasking. I have the standard 4 gigs of ram installed, but running programs like MS Word and Safari at the same time, the machine seems to struggle a bit. Also I have noticed when doing a lot of file transfers via USB, the fan will kick up to high gear for a few minutes and then drop down. Is there something wrong or is this normal? I'm doing a time machine backup of 120Gigs, have safari open and activity monitor open.
Activity monitor states 1.16Gigs free, 792MB wired, 961.4MB active, 1.12GB inactive, 2.84GB used. VM size is 150GB, page ins are 962, outs are 380kb, swap used is 10.5MB. Right now the fan seems to have slowed to a mid range mode of some sort and is not in high gear. Thanks!

How many apps you instaled? how many pictures videos and time you get usigm it? let them a litlle sleep, and your mac nmini will ne wel.
As far as the fan is concerned, it will rev up and down
based primarily on CPU load. If something is using
up a lot of processor, it gets hot and therefor the fan
speeds up to cool it down, or atleast maintain a safe temp.
When the fan revs up, open Activity Monitor and see how
much processor resources are being used and look at
the list to see if any one process is using up CPU. This
can also give an idea of what may be slowing things down
as well.
And yes, when doing a lot of file transfers, things may
possibly rev up a bit if it is continuous for a period of time.

How do I control my fan speed?

Hello, I have a HP ENVY dv6 laptop, and from time to time it gets really hot, so i would like to have the opportunity to control my fan speed manual. Is there any way I can do that?
Please Help
Sincerely
Crab

Hi Crab,
If your Notebook is running hot then there are few methods you can try to maintain the Temprature.
1.) Go to www.hp.com/go/support website and go to Download Driver section listed under Support.
2.) Look for BIOS and download and install the latest one.
3.) Follow the on-screen instructions to install BIOS and NB might restart multiple times and make sure Ac-power Adapter is connected during the update/installation.
4.) From the Download Driver page, look for Software-Solutions and download HP CoolSense Technology software and install it.
(HP CoolSense Technology is a feature in some HP notebook PCs that combines hardware, software, and mechanical design to dynamically manage the temperature of a notebook).
5.) Restart the Notebook and check.
Also, check the below links for more troublshooting instructions for PC being warmer than normal.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01007591&lc=en&jumpid=reg_r1002_us...
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I am an HP Employee****
I work for HP.

Fan speed | SPLIT

Similar Messages

Maybe you are looking for