Fan stil running and power led is on after shut down

Hi.After windows 10 update my laptop does not sut down completely.The screen becomes black but the fan is still running and power led is on. To turn it off I have to push the power button for 5 sec. I tried to update BIOS, to change BOOT order - doasn't work.Can You halp me?

I updated windows 29/07 and in the same day was updatet NVIDIA driver.Than the first update I found with HP Support Assistant was System BIOS Update 01/08. - problem remainAfter your message I controlled for the updates and I found some, but I don't really think that thay can change something:- HP System Event utility- Simple pass- Wireless button- HP 3D DriveGuard Software - perhaps? After update and restart i used my laptop for some time and once again tried to swich it off - works. I'll try to use it a little bit longer an write back here later. By the way, thanks to you all for your ansvers for the moment. 

Similar Messages

  • HP Photosmart C310 Series Printer Display and power LED not lit...still able to print.

    I am not sure what happened. I was printing, walked upstairs, came back down and the display and power LED on my Photosmart C310 were off. I thought the circuit for the outlet had tripped but that was not the case. I unplugged the printer, disconnected the power supply and let it sit for 2 minutes. Plugged it back in and nothing changed. Forced off printer/reboot?..nothing changed. Tried online utility. Useless. Is this common? Is there a solution? Any suggestions? Thanks in advance.
    Have had problems with HP and Compaq in past and obviously made a mistake buying again. Product is past warranty and I am not willing to pay to speak with a "representative" who is on a computer using a diagnostic tree program literally taking shots in the dark. Thanks but no thanks HP. I would love to Office Space this friggin' printer but I'll hold off for now.. 

    I experince the exact same issues and have for most of the time I have owned my C310A. I've gone through all the firmware upgrades, the useless patches etc. something is WRONG with the printer as my power modules continues to pump out the voltage after the printer shuts down(I've confirmed with a voltmeter). My printer will be printing a photo and the display will shut off, the power light and wireless LED lights go off BUT the photo continues to printer and the carriage will return to its resting spot THEN remain unresponsive till I go through the unplug routine. It's no wonder HP discontinued this printer and I'm throughly disgusted at tthe lack of quality in the components. I('ve gone through at leat 5 HP printers in the last6 years, each printer failing to either power issues or ink delivery systems. There is a very obvious lack of quality control. I feel as thoughHP sells the shoddy printers to force continual upgrades and flow of ink sales.  The design and engineering and features of the C310 A is to be commended but the qulaity and reliabilty of the mfg. product is abysmaly horrible. HP once had a solid quality control methodology that was second to none now  its just too little and too late.

  • I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

    I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
    thanks.

    If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

  • Computer won't start up after recent version of mountain lion.  My power Mac was running extmely slow this morning, so i shut down to restart.  As it is starting the screen goes black, says something about debugging with the word panic in parentheses. was

    I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up.  When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses.  Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key.  Apple logo comes on gray screen, icon keeps circling and nothing happens.  This has happened three times in a row after shutting down and trying to restart.  Any thoughts?

    When verifying disk, said could not repair disk, back up as many files as possible then re format disk.  Computer now doing Internet recovery. Should I. Do the following in this order
    1 restore from back up on time machine
    2 re install osx
    These are the options coming up on osx utilities window

  • I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening?  I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

    I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening?  I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

    same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
    - saving these threads on my favourites cause i'm about to crash . . .

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • IMac making loud beeps and freezes.  Only way to shut down is hold power button.  Any ideas what might be wrong?

    iMac making loud beeps and freezes.  Only way to shut down is hold power button.  Any ideas what might be wrong?

    iMac making loud beeps
    Could be the RAM  (memory)  
    Power On Self-Test Beep Definition - Part 2

  • Have an old mac mini 2008 running OS x 10.6 whenever I shut down or restart it wont find the dell screen again. have tried with different screen same result. have revived it before by unplugging all cables zapping PRAM and starting in safe mode

    Have an old mac mini 2008 running OS x 10.6 Whenever I shut down or restart it won't find the dell screen again. Have tried with different screen same result. Have revived it before by unplugging all cables zapping PRAM and starting in safe mode but no luck now. It has all my daughters exam work on it which she, of course, has not backed up so any suggestions gratefully received.

    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    You do have a backup, right?

  • When playing WOW my MacBook air's fan comes on and stays on until shortly after I stop playing.  is

    When playing WOW my MacBook air's fan comes on and stays on until shortly after I stop playing.  is this normal?  Never comes on at any other time.  Thanks.

    Thank you, but I followed all instructions to reset the SMC and it has not helped. Looks like I'll have to take it in to Apple for repair.

  • When asking to view statements in online bills--firefox continuously runs a blank tab that is added to my downloads and I cannot stop it without shutting down the computer?

    I use Firefox for all our online bill statements. When I go to my Charter One bank account and press view e-statements, firefox does not view these statements, it has started to show pages that are blank and the tab is say charterone.com....dafault/???????(not
    sure what is after default) After shutting down and restarting, my downloads are loaded with these blank pages that I've been deleting--hundreds of these. How do I stop this from happening every time I want to view my account statements?

    Hi,
    Please see [https://support.mozilla.org/en-US/kb/Firefox%20keeps%20opening%20many%20tabs%20or%20windows this].

  • Fan going crazy after shut down

    It happened twice in the past two weeks. After shut down, a fan (in the back I believe) spin very very fast, as loud as a vacuum cleaner. The only way to stop it was to unplug my mac pro. It was so strange. I have had issues with fan noise, and the finder crashing. Anyone with an idea: I'm thinking of bringing the mac to the shop.

    No I do not think so, I have the standard configuration: 2x2.8 Ghz with an ATI Radeon 2600.
    Extra are 2x1GB memory from OWC, and 2 SATA Drives.
    I've tried to reset the SMC many times, without noticing much of a difference: I've been monitoring the temperature at the power supply location and the memory bays: PS is around 110, memory around 105-120, depending on the Bay. I am running smcFan Control. I"m running the fans 1/4 faster than the MacPro default (according to smcFan Control preferences.)
    Mea culpa, there's no AC in the room where I work, the Ambient temp has been 70-85.
    Am I overtly concerned? I don't really have the time to bring the Mac to the shop.

  • MacBook Pro sometimes stays on after shut-down and drains the battery.

    Sometimes my MacBook Pro stays on after I shut it down and it drains the battery until it dies. I return home to find it the clocks and everything have to be reset.  It appears to be shut-down after I select that command, but on occasion it will remain on in a semi-on state and i need to force quit it w/ the power button.  It usually shuts down ok, but this happens every once in a while and I have to continually double-check that it's off before leaving it.  Otherwise, I will come back and the battery will be very warm and the machine is running, but not really on.  Any ideas?

    Problem solved by my own. But do not how :) magsafe again working and the laptop tooo

  • Fan doesn't turn off after shut down on 15" MBP C2D

    The fan on my 2-day old MBP C2D stays on even after shut down. The speed of the fan even changes. 3 hours after I shut down the fan was still spinning. I pulled the battery and pressed the power button to reset the SMC. As soon as I put the battery back in the fan immediately started spinning again. I didn't even power it on. When I do power it on the fan stops.
    My Macbook Pro is actually noisier when it's off than when it's powered on. Has anyone else encountered this. Hopefully there's an easy fix, I don't want to have to leave it with the Apple Store.

    A stab in the dark but have you tried resetting PRAM and NVRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    … and the System Management Controller…
    http://docs.info.apple.com/article.html?artnum=303319
    … ?

  • IE had unknown error and after shut down laptop screen is blank

    HP Pavillion dv6t Select Edition Customizable Notebook PC # A2Z58AV
    Windows 7
    IE popped up with a message that there was an error. No other explanation. After shutting down and rebooting, the laptop screen is black but has power.
    No changes made to operating system before this occured.

    Hi @devitojj 
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that when you power off your notebook it automatically restarts in 4 seconds.
    You have tried several steps to try and resolve this but there is no change.
    As it repeated the behavior with the hard drive removed, you know it is not an issue with Windows.
    You have tried updating the bios and returning it to bios defaults but no change.
    Here is a link from answers.microsoft.com that helped other people with this issue.
    Windows 7 computer restarts automatically after shutdown
    This does suggest you edit your registry which does have the potential to cause issues, so be very careful.  I would also suggest backing up your registry before you attempt it, just in case.
    Back up the registry  from Windows.microsoft.com
    If that has not helped, I would try removing the Cmos or RTC battery for 30 seconds and then replacing it.
    Please let me know if this helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Diagnostic and usage still being sent after shutting it off

    My Mountain Lion workstation is still sending Diagnostic and usage information after I have shut that option off. It includes contact information. How can I prevent this without using the gui?

    Unfortunately this is  not thwarted case as I stated in thelog it is still sending and I m able to confirm this through the network as ssl to network 10.x.x.x apples network
    Sent from Samsung MobileApple Support Communities Updates <[email protected]> wrote:                                              
    You received a reply
    dwbrecovery has replied to your question. You can view the full discussion in Apple Support Communities.
    Diagnostic and usage still being sent after shutting it off
    Hi,
    - SubmitDiagInfo does run periodically to clean up any diagnostic and usage info created a month ago and is no longer needed.
    - Since you have set no reporting, SubmitDiagInfo will not collect and send to Apple diagnostic info. not yet sent.
    https://developer.apple.com/library/mac/documentation/Darwin/Reference/Manpages/ man8/SubmitDiagInfo.8.html
    Hope this helps
    Correct Answer
    Helpful Answer
    Use the buttons above to tell dwbrecovery and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to dwbrecovery, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Maybe you are looking for