Fans - What's Up???---A follow up

A few weeks ago I posted the referenced topic, and got lot's of good help and advice which I thank everyone for (and a special thanks to maclover.) If you're interested in the origingal discussion, you can find it here:
http://discussions.apple.com/thread.jspa?threadID=719066&tstart=0
This post is just to let everyone know what happened, and maybe to console others that have similar fan problems. It seems to be kind of a hot topic!
Sometimes, you've just got to bite the bullet. In my case it turned out to be a bad logic board. For a mere $800 I'm back in business with quiet fans. It was a really tough decision to sink that much money into the repair, but a friend convinced me to when he said, "Hey, I just put $450 in brakes on a car I paid $500 for last year!"
Another kicker, turns out my hard drive has problems too. I declined the repair shops offer to replace it. I think I can handle that one. Look for some upcoming questions from me though!
Regards,
JimT
G5, Dual 1.8's Mac OS X (10.4.8)

Hi Jim - Thanks for the update - sorry to hear it was the diamond-encrusted platinum Logic Board. Glad it's fixed - trust it will last for ever now...

Similar Messages

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Create a generic extractor using Function module, what steps must I follow

Hello gurus team
I need to Create a generic extractor using Function module, what steps must I follow?
Just I have a function module not estructures or something, only the program.... and I have intented to do it in rso2 using the fm option, but give an error... somebody can helpme???
BR

Hi,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Thanks,
JituK

What version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

what version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

Lastpass 2.0.0, Kaspersky 2012, 2013 and Internet Download Manager 6.12 build 21 are fully compatible with Firefox 15. If you are having any issue, let us know :)

HT6114 I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several

I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several steps and may require new versions of iWorks and iLife (at least)

The relevant information is:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
Chipset Model:          NVIDIA GeForce GT 120
Type:          Display
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0655
Revision ID:          0x00a1
ROM Revision:          3370
Displays:
iMac:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected

How to rename in batch. What happens when I follow instructions is that I get 8909808001.jpg for 1. All I want is 1.

How to rename in batch. What happens when I follow instructions is that I get 8909808001.jpg for 1. All I want is 1.

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

What are the steps followed inaggregatation level bi-7

what are the steps followed inaggregatation level bi-7

hi,
chk these links
http://help.sap.com/saphelp_nw04s/helpdata/en/43/1c3c7031b70701e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/2861d1e036400ee10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/293f3414483fe1e10000000a11466f/frameset.htm
Ramesh

My computer sounds like a fan what should i do?

my computer sounds like a fan very loud what should i do

Reset the SMC.
Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

What is inserting the following code onto pages " div id="bikatoc" style="display: none;" a class="control" Close /a div class="toc" ul li class="toc-h2

I am doing web development and when working with the wordpress dashboard tiny mce, each time I hit the update button the following piece of code is inserted into the page I am working on.
<pre><nowiki><div id="bikatoc" style="display: none;"><a class="control">Close</a>
<div class="toc">
<ul>
<li class="toc-h2"><a href="#toc0">Just for the Health of it</a></li>
<li class="toc-h2"><a href="#toc1">Wild Yukon River Salmon</a></li>
</ul>
</div>
</div>
</nowiki></pre>
Something is scanning the h1-h6 tags and creating a table of contents and inserting it into the page. This also happens when I use firebug on other random pages while using firefox.
I have tried several other browsers to determine if this is a wordpress issue, but this only happens in firefox. It also only happens when I make changes with firebug in firefox. Using firebug lite in chrome did not cause this problem.
I have been looking all over to figure out what is going on and why the is happening. It is making development near impossible and is forcing me to use a different browser (which I don't enjoy at all)
Any help you can give me would be wonderful.
Thank you for your help

Is it always hidden with display:none?
One standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.com/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If the inserts stop, this points to an add-on as the problem. Figuring out which one it is would be the next step. (If the TOC is always hidden, perhaps it is something SEO-related.)

What sequence to be followed to move tranport req's from r/3 dev- quality

Hi all
we are having our landscape as
r/3 dev -> bi dev
r/3 quality -> bi dev
r/3 prod -> bi prod
we are now in development and moving all our transport requests from r/3 dev -> r/3 quality. and our r/3 quality will be connected to bi dev.
we have to make a list of transport requests in a sequence taking care of all the dependencies.
Can anyone please explain what all things have to be taken care when making a list of our transport requests from r/3 dev to r/3 quality.
for example : Like we have many enhancements that are done to the standard datasources.
suppose we have list of transport requests like this what should be the order of preference.
1. request1-datasource activation.
2. request2- new append structure
3. request3-changes to extract structure (adding them from the pool into lbwe)
4. request4-new data element created for within the above append structure.
5. request5 - cmod code for transaction data zxrsau01 program
6. request6- cmod code for master data zxrsau02 program.
we have seen issues like we found some appended fields missing in quality system after transporting.
please help me with the sequence in which transport requests ( r/3 datasources )have to be transported from r/3 dev to r/3 quality
thanks
Krishna
Edited by: krishnav3.5 on Sep 2, 2011 10:56 PM

one last question
when transporting requests related to generic datasources from dev to quality or dev to pro what should be the order of transports.
is it the same order as for standard datasources?
we have following requests related to our generic datasource
request1: data element used in append structure
request2: request for append structure
request3 : data source activation.
What is happening is like when we are following the above order we see that in our datasource all the appended fields are hidden (hide tick).
so we have followed the order
request1
request 3
request 2
request3 again.
Can any one explain if this is that right order . becoz now we see all the append structure fields hide-untick but
importing request 3 twice seems something odd. can anyone explain why this is happening
regards

What standards to you follow for moving processes into production?

During our last audit, one of the findings is that we should not have the OWB production repository open to all of the developers at all times. As a result of this finding, we allow the developers to develop in the OWB development repository. We have not yet established a promotion process that we are completely comfortable with. What processes do other ogranizations follow that enable us to lock down the production environment and yet provide a mechanism that processes can be promoted into production?

Hi,
Its pretty easy, once your development completed;
1) export to mdl file (OWB metadata) the ne or modified objects
2) create a generic OMBPlus script that will perform all required tasks
-register you locations
-deploy connectors, objects, process flow & perform the required grants
We have been doing this for over 4 years now... The Dba can't be more pleased as they just need to execute a single script and send us the log file.
Now creating that generic script is not easy but its worth it. We have close to 20 owb environment. Every time a new project starts, we trash one environment, put up out "template dbs" (sources & target) and run OMPPlus which will deploy every single object and perform the grants, etc... w/o any supervision.
BTW in a multiple environment situation(like ours), the script is also used to perform the retrofits!
Regards,

ThinkCentre A70 (7099) case fan, what size?

Hi,
I need to get some more air flowing through my ThinkCentre A70 (7099).
There's a place for a fan in the rear of the case below the PSU. I've measured it and I think it's either a 92MM fan or a 100MM fan but I don't want to buy the wrong size fan.
I can't find any information about it on any document from Lenovo. There is no information what so ever about a rear case fan for the ThinkCentre A70 anywhere.
Which size is it?
Regards
P-H, Sweden

You might want to use a 3-pin fan with speed adapters, so you can control the amount of air flow (rather than rely on what the BIOS thinks is correct.) I have the precurser to one of these installed with the medium speed adapter:
http://www.noctua.at/main.php?show=productview&products_id=104&lng=en
"3 speed settings for full flexibility
Providing 1600, 1250 and 1050 rpm speed settings via the supplied Low-Noise and Ultra-Low-Noise Adapters, the NF-A9 FLX (Flexibility) can be fine-tuned for superior airflow or maximum quietness."

Fans - What's Up???

My Mac has been working perfectly up untill today. I rarely turn it off, just let it go to sleep overnight. When I woke it up today, the fans started going like crazy! They've been running for about 20 minutes now, and won't shut down. I tried a restart, same thing. I shut down and booted back up, same thing.
Does anyone have any experience with something like this? What would be my next step?
Thanks,
JimT

Hmm... seems fairly normal - except that it runs a lot cooler than this DP2...
Based on read-outs from HM running on this Mar 04 DP2 and practical tests on this Mar 04 DP2 - 'OS X' is telling the Drive Bay fan to spin at 1000rpm which is the 'default'; high room temps will cause it to increase, but 1000 is the lowest, and usual speed.
If you are positive it is the Drive Bay fan that is making all the noise - and (whilst I have no recollection of any such suggestion) I suppose you could check this by stopping the fan momentarily with a suitably soft-but-firm object - then the sub-system "below" OS X (in firmware, I guess) is instructing it to spin fast.
The most-common cause of this is the clear plastic deflector panel not being correctly located, or the sensor reflector tape on the right-hand locating peg being damaged - but this sensor is linked also to the red LED on the logic board edge, which you state is working as it should when the air deflector is moved.
On this DP2, HM still reports 1000rpm for the Drive Bay fan when the deflector sensor is triggered, because HM reports the OS X instructions, not the 'lower level' firmware ones.
So, if it's definitely the Drive Bay fan(just left of, and close to the hard drives, behind a silver wire grille) making all the noise, and it's not being triggered by the deflector panel sensor, and you've reset the PMU/SMU, I don't know what else to suggest.
There is some mention of thermal calibration(at page 95)
- and possibly other relevant info - in the document linked-to here
http://discussions.apple.com/thread.jspa?messageID=3510337#3510337
Sorry, it's a bit late here now and I'll look at this again tomorrow in case there's anything obvious been missed. Good Luck.

HT2371 What ir you did follow the steps for changing your language and it didn't work on your App Store?

What if you followed your steps for changing the language on your Apple id but it doesn't work on your App Store?

High fan speed (but not 100%) following hard drive upgrade

Hi,
I recently upgraded the hard drive on my 2007 Mac Mini to a 320Gb Western Digital Scorpio Black. Since then, the computer's fan has been very annoying. The fan is not running at 100% all the time, but it ramps up very quickly when the computer is under the lightest of loads. Simply scrolling a webpage will send the fan speed up to around 4500 - 5000 rpm.
My first instinct was that the 7200 rpm drive was creating too much heat, but the temperatures are all fine with the hard drive around 30 - 35 degrees C and the CPU around 35 - 40 degrees C, at a fan speed of 1500 rpm. The temperatures drop down to the 20s when the fan ramps up.
The problem is as described in this article: http://support.apple.com/kb/HT3964
"The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated."
I've followed the reset SMC procedure several times and yet the problem persists. Can anyone help me to solve this problem? Given the low hard drive temperatures and the fact that the fan is spinning up without disk activity, I'm hoping the drive isn't to blame. I'm getting fairly experienced at working inside the mini, having done three memory upgrades and two hard drive changes, but I would still like to avoid opening it and changing the disk again.
Thanks,
David.

Same thing happened to me. Upgraded HD and RAM, fan spins up at a mere scroll of a web page.
I checked the usual suspects -- vents, foam "T", physical placement, cables back in place.
Also, I went back to the original equipment and found it still "wound up" quickly.
Another data point -- when the fan is accelerating and when at speed, the air coming out of the vents is not very warm. Windows laptops I use discharge very warm air when the fans spin up. Could the calibration of the CPU temp guage be off?

Fans - What's Up???---A follow up

Similar Messages

Maybe you are looking for