FAQ: AII-MBL-RFID (RFID Mobile Device Integration)

Version: 20060317
Q: Where can i find more information to the AII-MBL-RFID interface ?
A: Have a look on our ICC webpage in the SDN:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/bc6e21e7-0801-0010-08bc-99931062a3e4 [original link is broken]
Q: What costs are arising when we want our product to be certified ?
A: See also out SDN page under the headline "Price List".
Q: Is there a link/page for the already certified products for this interface ?
A: Sure, have a look on our ICC page under the headline "Certified Solutions"
Q: Who can we ask in case of general question ?
A: Have a look at our general ICC forum:
SAP Integration and Certification Center (SAP ICC)
Of course, if you have urgent requests you can send them also directly to our local ICC's:
ICC Walldorf in Germany: [email protected]
ICC Palo Alto in USA: [email protected]
ICC Bangalore in India: [email protected]
Q: Who can we ask in case of technical questions ?
A: This depends on the state of your certification project.
1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
2.) When the certification contracts have not been signed then you can ask questions in this forum.
Q: Are there differences between version 2.1 and 4.0 ?
A: The interface has no changes from AII 2.1 to AII 4.0.

Similar Messages

FAQ: AII-DC-RFID (Auto ID Infrastructure - Device Controller Interface)

Version: 20060317
Q: Where can i find more information to the AII-DC-RFID interface ?
A: Have a look on our ICC webpage in the SDN:
SAP Supply Chain Management- Device Controller Interface (AII-DC-RFID) [original link is broken]
Q: What costs are arising when we want our product to be certified ?
A: See also out SDN page under the headline "Price List".
Q: Is there a link/page for the already certified products for this interface ?
A: Sure, have a look on our ICC page under the headline "Certified Solutions"
Q: Who can we ask in case of general question ?
A: Have a look at our general ICC forum:
SAP Integration and Certification Center (SAP ICC)
Of course, if you have urgent requests you can send them also directly to our local ICC's:
ICC Walldorf in Germany: [email protected]
ICC Palo Alto in USA: [email protected]
ICC Bangalore in India: [email protected]
Q: Who can we ask in case of technical questions ?
A: This depends on the state of your certification project.
1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
2.) When the certification contracts have not been signed then you can ask questions in this forum.
Q: Are there differences between version 2.1 and 4.0 ?
A: The interface has no changes from AII 2.1 to AII 4.0.

Hi Sara,
SAP Device Controller Interface is the interface that will be used by device controller softwares to send data to SAP AII and vice versa. Device controllers filter the RFID reads and send a unique read event to SAP AII. SAP AII on receiving this message processes it. It can be the case that as part of processing we also require to send data back to devices/controller or send a command such as tag commissioning. At this time also the same interface is used.
Regards,
Yogesh Bhatia..

How mobile device ( rfid/barcode reader) communicates with SAP transaction.

Dear Friends !
Good morning, How are you ?
I want to understand that in ITSmobile How Mobile device ( RFID Reader ot Barcode scanner/reader) to fetch the data and supply the ITS screen.
I believe every mobile device has some .dll file or something in that we have some methods if we call it say in .net or java application we can read the rfid or barcode and from the returning paramter of the .dll method we can get information what we want ( if i m not wrong).
now the question is if I have some barcode /rfid number which is assigned to sap material number. if on mobile device I run mm02 transaction code n trigger the gun can I get the material number in material number field . ( assume I have program which can fetch the material number from barcode/rfid number.) ? but to pass rfid number / barcode what should I do. I can write javascript and call that method but dont know weather I can use javascript or not in that.
to be simple:
How can I get barcode / rfid number to my sap transaction. if possible
please give me any suggestion. document link... help.... whatever may help me to understand this. I will greatly appreciate your reply
Thanking you
Regards
Naeem

Hi Ajay,
Please refer to note 1057759 for the delivered Drivers for Peripherals in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
The Javadoc to get an idea about how to use those PIOS API for barcode scanner
http://help.sap.com/javadocs/nwmobile/SP3/laptops/com/sap/ip/me/api/pios/scanner/ScannerConnection.html
As input from Barcode scan have to be taken in Wedge Mode, there is no need to do any developments in MI JSP Application. To enable barcode scan one can download barcode scan tools available from Handheld Vendor sites
Regards,
Amith

SAP AII 5.1 Transactions from Mobile device - Using SAPConsole

Hi Friends ,
1 . From Mobile devices [ SAPConsole enabled ] , can we execute all SAP AII 5.1 transactions ( Like Tag commissioning, decommissiong , Packing ,Loading etc ., ) ?
2. We specifilcally looking for 2DBarcode and Liner barcode not for RFID .So, will it fulfill our needs ?
Please provide some inputs and it would be great if you provide some help links .
Regards.,
V.Rangarajan

Hi Henrik,
Did you find the solution to your problem ?
I'm facing the same issue, so I'd be pleased to know the solution!
Regards
Stekam

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

Integrating Mobile device with SAP XI

Hai,
       In integrating mobile device with XI.
      What are the settings i need to do in ALE settings.
      what type of adapter i need to use.
please provide complete information related to SAP R/3 settings like
1. logical system
2. rfc destion nation
3. ports
4. parter profile
in XI side what are the settings i need to do.
plase provide complete information. help me out.

Please,
check the following documentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d
It is an article about the integration of mobile devices with XI from this site.
I hope it helps you.
regards,
Jaime

Windows 8.1 mobile device management using integrated environment of SCCM 2012 R2 and Windows intune

Can we avoid the dependency on the Symantec certificate for enabling windows phone enrollment under Administration->Cloud services -> Windows InTune subscriptions - Windows Phones. My environment will have only windows 8.1 phones.
Regards
Leela

See http://status.manage.microsoft.com/StatusPage/ServiceDashboard.
Engineers are investigating a service issue impacting access to portal via mobile devices.
(Started on 12/30/2014 8:00:00 AM UTC)
1/8/2015 11:42:49 PM (UTC)
Current Status: Engineers are continuing to troubleshoot potential issues related to Active Directory Federation Services (ADFS). Engineers have gathered additional traces and logging data for deeper analysis. User Experience: Affected users with Windows Phone,
iOS, or Android devices are unable to access their company portal and receive repeated prompts to enter credentials. If incorrect credentials are entered, users will receive an error stating that they have entered a bad password. Customer Impact: Engineers
have received reports that some customers are experiencing this issue. A subset of users are affected by this event. Other users remain unaffected. Incident Start Time: Tuesday, December 30, 2014, at 8:00 AM UTC Next Update by: Tuesday, January 13, 2015, at
12:00 AM UTC
Torsten Meringer | http://www.mssccmfaq.de

Carrying out Transactions on Mobile Device Interface

Hi
We installed IIS and we have checked the AII mobile transactions through WebSAPConsole. It is working fine.
We now want to carry out these transactions through the Intermec IP4 handheld device that we have. What are the things that need to be in place for us to carry out the mobiletransactions on this device? Will I be able to scan an RFID tag and see the UID on the screen? The device is an intelligent device, has Win CE on it.
What are the steps.
I have accss to the pdf: "SAP AII mobile RFID device integration Guide".
Regards
S

Hi Ron
Sorry for coming back after such a long time gap. I am asking a lot of questions here in this message, sorry about that.
I am unable to explain to our device supplier and get the XSLT file for Intermec device. I could not find it online, like other manuals of Intermec. Any idea how I get this file for the IP4 model?
You mentioned i-Browse. Will the XSLT work only if the browser is i-Browse? Will it not work with IE on the handheld? Will the XSLT file require mofications then? Maybe if I had the XSLT, I would not be asking you as many questions.
If we have the XSLT file, are you saying that once the reader trigger is pressed to read a tag, the UID value would appear on the ID text box on the screen? How is this achieved? I would like to understand the architecture here please :- how the tag value gets passed from reader to the handheld to display on the active cursor field.
Regards
Sankar

Compatible with Mobile Devices?

I was wondering if Muse could be used to build/publish websites designed for tablets and other mobile devices? If so, does it include some of the new features in dreamweaver like adjusting format for multiple devices? If not, does Muse integrate with dreamweaver to allow muse files access to those features?

Hello,
Please see the FAQ topic:
Can you scale the layout of your site based on the browser, device screen size? (responsive design)
http://forums.adobe.com/message/4313082#4313082
Muse is not integrated with Dreamweaver, and HTML output from Muse is not optimized to be edited outside of Muse.
Best regards,
Corey

Can't see any orders in Mobile Device

Hi all,
As described in topic "How to deploy MAM 2.5 into MI Server", I have just installed MI and deployed MAM 2.5 into an WebAS 6.40 SP13.
I have also, with the help of the functional guys from my team, followed through the Server Side Configuration part of the MAM Config Guide and created the scenario. I have assigned my MAM user (same userID of the backend) to the scenario and I'm now trying to see the orders of that scenario in the mobile device.
The problem is that I can synchronize the device but I can't see anything in the MAM besides de User View Manager.
I executed MEREP_MON and for my mobile ID I can see 1 I-Waiting for each SyncBO, 5 I-Error for SyncBOs MAM25_001 and MAM25_010 (but by the times of the logs, it seems that they are quite old already) and 5 I-Finished for all the other SyncBOs. Also, there are 5 0-Sent for each SyncBO but for MAM25_017, that has 19 0-Sent. All the other fields are 0.
What does the I-Waiting and I-Finished and so on mean? How can I make my user to see his orders?
Thanks,
Daniel

Hi Daniel!
I understand that the result you see in the Worklist monitor doesn't help.Did you try the recommendation in the FAQ.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mi/mobile application faq/mam client faq.faq#q-4
If it doesnot help, try the following
(1)In the SPRO under MAM Customizing settings, go in to
"Assign Orders and Stocks to a Technician" and then double click the "Assignment Profile(Assigned to your MAM User ID in User dependant data)" and change the Order Assignment & Notification Assignment to "User-->Employee Number", if it is assigned to a Work Center OR a Planner Group.You can reset this back to the original settings later if required.
(2)Replicate the MAM25_090 & MAM25_095 via transaction MEREP_EX_REPLIC in the middleware.
(3) Synchronize the data from your MI Client
(4) If no data exists Monitor your Worklist as you did earlier.
Let me know.
Thx
Gisk
Message was edited by: Gisk

Cisco ISE 1.2.1.198 Guest Portal Vlan Override at Mobile Device (android,IOS) not working

Hi Guy,
In my ISE deployment, once the guest succcesful authenticated will be assign guest VLAN for internet access.
we are using guest portal to do the vlan override once user authenticated.
Window 7 Internet explorer (Active X), Chrome (Java Aplet) is working fine.
but Android,Apple IOS devices unable to release the DHCP and get new DHCP.
because from ISE and WLC we can see the Vlan have change, how mobile devices initiate dhcp release for Guest Portal
Kindly advice.
Regards
Freemen

I don't have such documentation nor I could find any on Cisco's site. With that being said, it doesn't mean that it doesn't exist. I just know that Active X is windows specific framework and Java is not supported on either iOS nor Android:
http://www.java.com/en/download/faq/java_mobile.xml
The good news is that Cisco appears to be steering away from Java so it is possible that in the future this will be supported.
Hope this helps!
Thank you for rating helpful posts!

How to install the JRE that comes with JME 3.0 to a Windows Mobile device

From Sun's JME download page:
Integration with 3rd party emulators and Windows Mobile devices
The new Java ME Platform SDK architecture allows integration of 3rd party emulators and devices. Java ME Platform SDK comes with Sun's Java runtime environment for Windows Mobile. A user can install this runtime on a Windows Mobile device or a Microsoft device emulator and experience all the on-device features of Java ME Platform SDK.*
My question is, how can I install the Java runtime environment that comes with Java ME Platform SDK 3.0 to a Windows Mobile device. I am a newbie in this device programming and I'm setting up my development environment. So far, I have installed JME in my computer, and have also installed both the Windows Mobile 5 and Windows Mobile 6 emulator. I've been searching the internet for answers, but it always points me to using a third party java runtime such us Mysaifu, etc. I would like to stick with what is packaged with JME if possible.
If anybody assist me or direct me to an online documentation on how to do this. All help is greatly appreciated :-)

I had some success installing on a real Mobile 5 device [http://forums.sun.com/thread.jspa?threadID=5344195]
There is a link to a doc on the main download page, item 5 under How to Install. [http://java.sun.com/javame/downloads/sdk30ea.jsp] I used this for the real device, Treo 700w. Did not try it with an emulator.
The support looks to be an emulator rather than a JVM per say. But then again I could be wrong on that. I too had poked around looking for a JVM, CrEme, J9, etc..
I do have a commercial app installed on the Treo that uses IBM's J9, which is seems requires a contact with a sales person to get ahold of. I had hoped to find something that might clue me in on how to "hook up" my own J2ME app with the J9 installed by the commercial package. But I've pretty much decided to get a real J2ME handset rather than continue to waste my time hacking up something with WM. Now the question is which one makes a good reference platform?

Multimedia in PDF on Mobile devices runnig android and iOS6

Hello,
I managed to integrate video (mp4) and also animation (.swf) into a PDF-file. Were are distributing PDFs to our students. Is there any possibility to access the multimedia content using mobile devices? That is tablets running iOS 6, android 4.1 and also e-readers such as kindle paper white?
I tried different readers on iOS and also on android but could not get it to work.
I'm looking forward to get an answer to this question.

In terms of Adobe software, the short answer is "no" and the long answer is "wait and see but don't get your hopes up".
The paid-for third party Android app "ezPDF Reader Multimedia" has some support playback of video and sound annotations, but it doesn't cope with Flash or scripting so the experience in a complex interactive PDF is variable to say the least.
In terms of Flash, there will never be integration into the mobile versions of Reader as the runtime isn't distributed to mobile platforms anymore. About half of the JavaScript API calls are technically possible on Android but JS isn't part of the app yet (we have very limited JS API support on iOS right now, but only for forms-related function calls), Direct playback of embedded RMA media streams (MP3 and H.264) is also technically possible on both platforms (as ezPDF demonstrates), but Adobe have chosen not to make it a priority.

Working with files on mobile devices

Hi everybody,
at the moment we are running a Vibe 3.4 server which is used most of the time by normal pc clients with the users using the browser or the Vibe desktop client to connect. Now we are getting a tablet project using Vibe more via mobile access (Android based) . The Problem now is, I can do many things with my mobile Vibe access or the Vibe App but I havent figured out how to work with my files stored in Vibe while accessing them via a mobile device.
Is there any possibility to open and work with the files/attachments?
If no, is this a planned feature for the future?
Any help, hint or trick is is greatly appreciated
Regards,
Andreas

astock,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Why is the viewport markup not scaling my site correctly for mobile device?

Firstly, thank you in advance for taking the time to look into my comment/question/issue.
Secondly, I have ran the validation with WC3 but have not had a moment to edit and update the corrections. Hoping that will fix the (other) issue I have with the light box not working correctly.
O.k. on to the primary issue... simply put, when viewing on my (and checking on other's devices), my site doesn't scale correctly to the viewport. Sometimes it scales correctly, but you can "pinch" the screen to zoom out and the site scales down and justifies left.
Any thoughts as to what I have missed here?
url:
http://www.toddrlewis.com
thank you again!
-T

Aside from the lightbox issues I am having, I was able to get the code cleaned up.
Issue still exist after some more tinkering. Code responds, and loads to the browser size correctly. However, you can re-size on a mobile device and it backs all the way out to about 50%, and justifies left side of the browser.
I've never ran into this type of issue before. But this is the first time I've integrated it with a site I've built from the ground up based on the Bootstrap framework.
All other times, framework and meta tag were already applied and no issues arose.

FAQ: AII-MBL-RFID (RFID Mobile Device Integration)

Similar Messages

Maybe you are looking for