FAQ with Answers for all forums (To Moderators)
Hi,
Looking at many of the forum messages I felt that few of them are repititive in nature. If the moderator can send the Important messages(Q & A) of a particular forum to somebody in oracle and if they can maintain that as FAQ for each forum on OTN database and a link for that to the OTN user it will be a great help. This will help the memebrs for quick learning if they are new to that technology.
Cheers
Ran
Ranjeesh,
As a beginner, I recommend:
http://otn.oracle.com/products/warehouse/selfserv_edu/self_service_education.html
However, point taken.
Thanks,
Mark.
Similar Messages
-
SAP HR FAQ with Answers (10000+)
Hello SAPpers
Stop searching in google just look at this 1000+ SAP HR FAQ with Answers.
[SAP HR FAQ with Answers|http://www.straightrazorplace.com/forums/members/hoglahoo-albums-forum-stuff-picture494-no-spam-logo.jpg]
If you like it reply for more...Good work
really Appriciate ur efforts -
My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. Unfortunatly I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks later. Need immediate help!!!
Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
For example, if you had:
Question 1 and Question 1 Yes/No checkboxes
Question 2 and Question 1 Yes/No checkboxes
Question 3 and Question 1 Yes/No checkboxes
Question 4 and Question 1 Yes/No checkboxes
Then whatever answer you selected in Question 1 would populate down through the rest of the form.
Changing the Yes/No field properties in questions two through four would eliminate the problem.
I hope that helps,
Brian -
I Will Recommend it, FAQ For all forums (To Moderator)
Hi ,
When I came across many posts (in any discussion forum) few of them are repititive in nature,
so if the moderartor of the group (applicable for all groups) can consolidate all those FAQ with solutions
as a seperate link for all groups it will be very helpful, especially for a beginner.
with thanks & regards
Ranjeesh K RamakrishnanRanjeesh,
As a beginner, I recommend:
http://otn.oracle.com/products/warehouse/selfserv_edu/self_service_education.html
However, point taken.
Thanks,
Mark. -
Administrative limit reached with -1 for all settings
Hello
I have the system set to -1 for max number of items and timeout and it is still saying limit exceeded, and it appears that it is returning all the items in the directory server. No dynamic groups are working now. Any help would be appreicated.
Thanks
Chris ToledoDo you have the default value set to -1 for all of the following attributes?
nsslapd-sizelimit
nsslapd-timelimit
nsslapd-lookthroughlimit
nsslapd-idletimeout
If you're receiving "Administrative limit exceeded" errors (err=11), this is typically caused by exceeding the nsslapd-lookthroughlimit value (the maximum number of entries the server will look through for items matching your search criteria). This is different from nsslapd-sizelimit (the maximum number of entries the server will return to the client that match the search filter).
Also, be sure that your client application is not setting a more restrictive value for these items, and that the bind credential you are using doesn't have a more restrictive value for these attributes as well. -
Must install for all forum members
Hi everyone! Mods please move if I'm in the wrong forum?
Lenovo have launched a new laptop T Series I think that has a 'find my laptop' facility. But for the rest of you with older machines, please do not gut your lives as mine has been done unto? Do no procrastinate! Follow my suggestion. Do it now, while you can.
My new Z was stolen on Comrades Marathon day in S.Africa. My business in jeopardy as nothing had yet been backed up. This is why I refer to it as 'gutting ones life'. On the Monday after I found out that 3 laptops had been taken in that one day at the same shopping centre. Two of them Lenovos (they get sold at a taxi rank for ZAR50 or USD12!, this is for a ZAR 9000 machine!).
There are 2 very helpfull software packages that you can get:1) is a look for me type thing that traces the computer whenever it logs onto the net. 2) The other uploads photos at 15 min intervals of the person using the web on your computer. Choose one, choose both but install them. Google stolen Lenovo, you will see the agony of people wordwide. It is worth it to do.
My aim is to buy this new T series or whichever it is, if I can survive & resurect my ailing company because of the lost data. Obtaining a 'look for me' is - to me anyway, the most important & first consideration I will choose my next machine by.
Regards & 'may the Lenovo always be with you'.Hi Everyone,
Thanks for the answers. Sounds like a very creative group.
Our brilliant in-house WebWorks administrator set things up to convert FrameMaker+SGML to Oracle Help. This works really well because:
1. we type the help TopicID string into each FrameMaker+SGML Chapter-level and Section-level Id attribute. Each Chapter-level and Section-level group of SGML elements is converted to a separate help topic html file.
2. each TopicID and html file name is added to the MAP file.
3. each Id attribute value and the associated Title string convert to the TOC.xml entries
4. the Id attribute value becomes the target (Linkend) of any FrameMaker+SGML, cross-reference....making it possible to convert FrameMaker cross-references to Oracle Help links
5. cross-references to FrameMaker+SGML Glossary Term elements are converted to Oracle Help popups (and we assign the help TopicID for popups using the Glossary Term element's Id attribute)
6. ALink group membership is established by putting the ALink group name into a hidden marker within the chapter/section where WWP can find it. We use an additional marker to designate the location where a text-string should become a link to display the list of ALink members in Oracle Help.
We have been able to automate all aspects of the conversion including the helpset, index, full-text-search, and link files.
Pete, would you be willing to share information about your in-house FrameMaker+XML and XHTML Converter tool strategy? Are you taking a similar approach?
Best regards,
Wendy -
A limited edition of Jobs pic on the back cover with names for all country?
We will like to have a rememberance of Jobs pic and names on the back cover for a limited edition for every country that sell the 4S.
Can there be a way to put it up carving of a picture of Steve Jobs and name on the cover of 4S.
a Limited edition for every country at 1000 setsI'm sorry to say but this is a user-to-user forum with people who have issues with their devices.
if you want this to happen then leave a feedback at:
http://www.apple.com/feedback/iphone.html
It is unlikely Apple would do this in remembrance of him to put a picture of S.J on the iphone 4S. -
Get the Values with null for all dates
hi,
i have a scanrio to get the sales trend. The data look like below
CREATE TABLE #T1
( Item varchar(50),
SalesDate Date,
Quantity int
INSERT INTO #T1 VALUES ('Item1', '2013/02/01', 3)
INSERT INTO #T1 VALUES ('Item2', '2013/02/01', 5)
INSERT INTO #T1 VALUES ('Item1', '2013/02/02', 2)
INSERT INTO #T1 VALUES ('Item1', '2013/02/03', 6)
INSERT INTO #T1 VALUES ('Item2', '2013/02/03', 4)
SELECT * FROM #T1
Here i have 2 items sales details for 3 days. So user can get the sales trend by passing StartDate and EndDate as 2 parameters. But it will return the existing date values only. In this example Item2 not have sales record in the table for '2013/02/02'
But needs to give null values in the select Query
My Existing Output
Item SalesDate Quantity
Item1 2013-02-01 3
Item2 2013-02-01 5
Item1 2013-02-02 2
Item1 2013-02-03 6
Item2 2013-02-03 4
My expected output is
Item SalesDate Quantity
Item1 2013-02-01 3
Item2 2013-02-01 5
Item1 2013-02-02 2
Item2 2013-02-02 null
Item1 2013-02-03 6
Item2 2013-02-03 4
Can you help to write the query. I wrote using CTE but if the ITem is single value its ok. But for multiple items how can i get the empty datesakhil,
Check if this helps you:
--CREATE TABLE #T1
--( Item varchar(50),
-- SalesDate Datetime,
-- Quantity int
--INSERT INTO #T1 VALUES ('Item1', '2013/02/01', 3)
--INSERT INTO #T1 VALUES ('Item2', '2013/02/01', 5)
--INSERT INTO #T1 VALUES ('Item1', '2013/02/02', 2)
--INSERT INTO #T1 VALUES ('Item1', '2013/02/03', 6)
--INSERT INTO #T1 VALUES ('Item2', '2013/02/03', 4)
SELECT * FROM #T1
declare @tab TABLE(date_col datetime)
insert @tab select '2013/02/01'
insert @tab select '2013/02/02'
insert @tab select '2013/02/03'
;with cte
as
select * from
(select distinct Item from #t1) a
cross join
(select date_col from @tab) b
select c.item,c.date_col,t.Quantity from cte c
left join #T1 t on c.Item=t.item and c.date_col=t.SalesDate
You have the following options for the population of @tab (that decodes the dates for which values are to be obtained):
either explicitly as i have done
using a select statement on #T1 like, insert @tab select distinct SalesDate from #T1
or for past three days means, something like - getdate(),getdate()-1 and getdate()-2
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
I updated both my iPad and iPhone with latest update. Love it! However, I wanted to use the find iPhone using iCloud feature. From the beginning of update it kept prompting me to verify my account when I wanted to use iCloud ??? Apple kept telling me to check my email to verify my account and there is not an email from them. And I'm not talking about verifying by my alternate email which I was successful at.
Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
Calendar app in Yosemite does not sync with iCloud for all my other devices
Currently running Yosemite on my iMac and running 8.1 on all my iPhones.
When I make changes in the calendar in my iMac, iCloud doesn't reflect the changes and they also don't show in the phone.
Does anyone have a solution for this?Hey alb78,
Thanks for the additional information! If your issue persists after following the resource recommended by Jeremy, you may find more information by using another one of Apple's support channels - https://getsupport.apple.com/GetproductgroupList.action
- Matt M. -
Gather_table_stats with a method opt of "for all indexed columns size 0"
I have 9 databases I support that contain the same structure, and very similar data concentrations. We are seeing inconsistent performance in the different databases due to bind variable peeking.. I have tracked it down to the Min and Max values that are gathered during the analyze. I analyze from one cluster, and export/import those statistics into the other clusters.. I then go about locking down the stats gathered. Some of the statistics are on tables that contain transient data (the older data is purged, and new data gets a new PK sequence number).
Since I am gathering statistics with a 'FOR ALL INDEXED COLUMNS SIZE 1', a min and max value are grabbed. This value is only appropriate for a short period of time, and only for a specific database. I do want oracle to know the density to help calculate, but I don't want cardinality based on whether the current bind values fall in this range..
Example
COLUMN PK
When I analyze the min is 1 and max is 5. I then let the database run, and the new min is 100 and max is 105.. same number of rows, but different min/max. At first a select * from table where pk>=1 and pk <=5 would return a cardinality of 5.. Later, a seelct * from tables where pk>=100 and pk<=105 would return a cardinaility 1.
Any ideas how to avoid this other than trying set min and max to something myself (like min =1 max = 99999999). ??MarkDPowell wrote:
The Oracle documentation on bind variable peeking said it did not peek without histograms and I cannot remember ever seeing on 9.2 where the trace showed otherwise. Mark,
see this simple test case run on 9.2.0.8. No histograms, but bind variable peeking, as you can see that the EXPLAIN PLAN output generated by AUTOTRACE differs from the estimated cardinality of the actual plan used at runtime.
Which documentation do you refer to?
SQL>
SQL> alter session set nls_language = 'AMERICAN';
Session altered.
SQL>
SQL> drop table bind_peek_test;
Table dropped.
SQL>
SQL> create table bind_peek_test
2 as
3 select
4 100 as n1
5 , cast(dbms_random.string('a', 20) as varchar2(20)) as filler
6 from
7 dual
8 connect by
9 level <= 1000;
Table created.
SQL>
SQL> exec dbms_stats.gather_table_stats(null, 'bind_peek_test', method_opt=>'FOR ALL COLUMNS SIZE 1')
PL/SQL procedure successfully completed.
SQL>
SQL> variable n number
SQL>
SQL> variable n2 number
SQL>
SQL> alter system flush shared_pool;
System altered.
SQL>
SQL> exec :n := 1; :n2 := 50;
PL/SQL procedure successfully completed.
SQL>
SQL> set autotrace traceonly
SQL>
SQL> select * from bind_peek_test where n1 >= :n and n1 <= :n2;
no rows selected
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2 Card=1000 Bytes=24
000)
1 0 FILTER
2 1 TABLE ACCESS (FULL) OF 'BIND_PEEK_TEST' (Cost=2 Card=100
0 Bytes=24000)
Statistics
236 recursive calls
0 db block gets
35 consistent gets
0 physical reads
0 redo size
299 bytes sent via SQL*Net to client
372 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
4 sorts (memory)
0 sorts (disk)
0 rows processed
SQL>
SQL> set autotrace off
SQL>
SQL> select
2 cardinality
3 from
4 v$sql_plan
5 where
6 cardinality is not null
7 and hash_value in (
8 select
9 hash_value
10 from
11 v$sql
12 where
13 sql_text like 'select * from bind_peek_test%'
14 );
CARDINALITY
1
SQL>
SQL> alter system flush shared_pool;
System altered.
SQL>
SQL> exec :n := 100; :n2 := 100;
PL/SQL procedure successfully completed.
SQL>
SQL> set autotrace traceonly
SQL>
SQL> select * from bind_peek_test where n1 >= :n and n1 <= :n2;
1000 rows selected.
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2 Card=1000 Bytes=24
000)
1 0 FILTER
2 1 TABLE ACCESS (FULL) OF 'BIND_PEEK_TEST' (Cost=2 Card=100
0 Bytes=24000)
Statistics
236 recursive calls
0 db block gets
102 consistent gets
0 physical reads
0 redo size
34435 bytes sent via SQL*Net to client
1109 bytes received via SQL*Net from client
68 SQL*Net roundtrips to/from client
4 sorts (memory)
0 sorts (disk)
1000 rows processed
SQL>
SQL> set autotrace off
SQL>
SQL> select
2 cardinality
3 from
4 v$sql_plan
5 where
6 cardinality is not null
7 and hash_value = (
8 select
9 hash_value
10 from
11 v$sql
12 where
13 sql_text like 'select * from bind_peek_test%'
14 );
CARDINALITY
1000
SQL>
SQL> spool offRegards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Coupling INNER JOIN with FOR ALL ENTRIES statement
Hi All,
I am coupling INNER JOIN with FOR ALL ENTRIES statement .....
Would you please highlight its implications ?? Is it a best practise ?
Is it advicable to use MULTIPLE INNER JOINs with a FOR ALL ENTRIES ???
SORT itab BY matnr.
IF NOT itab[] IS INITIAL.
SELECT epmatnr epebeln ep~ebelp
epwerks epmenge ep~netpr
ekps_psp_pnr ebbelnr eb~menge
INTO TABLE iekpo
FROM ekpo AS ep
INNER JOIN ekkn AS ek
ON ekebeln = epebeln
AND ekebelp = epebelp
INNER JOIN ekbe AS eb
ON ebebeln = epebeln
AND ebebelp = epebelp
AND eb~bwart = '101'
FOR ALL ENTRIES IN itab
WHERE ep~matnr = itab-matnr.
IF sy-subrc EQ 0.
SORT iekpo BY matnr werks.
LOOP AT itab ASSIGNING <itab>.
READ TABLE iekpo WITH KEY matnr = <itab>-matnr
werks = <itab>-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
MOVE iekpo-matnr TO itab1-matnr.
MOVE iekpo-ebeln TO itab1-ebeln.
MOVE iekpo-ebelp TO itab1-ebelp.
MOVE iekpo-netpr TO itab1-poprice.
MOVE iekpo-werks TO itab1-werks.
MOVE iekpo-menge TO itab1-menge1.
MOVE iekpo-menge1 TO itab1-menge2.
MOVE iekpo-belnr TO itab1-belnr.
MOVE iekpo-ps_psp_pnr TO itab1-pspel.
MOVE <itab>-pspel TO itab1-tpspel.
MOVE <itab>-sobkz TO itab1-sobkz.
MOVE <itab>-fo_qty TO itab1-fo_qty.
MOVE <itab>-schgt TO itab1-schgt.
MOVE <itab>-postp TO itab1-postp.
MOVE <itab>-beskz TO itab1-beskz.
pend_qty = iekpo-menge1 - iekpo-menge2.
MOVE pend_qty TO itab1-pending.
APPEND itab1.
pend_qty = 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
Regards
Jaman
Edited by: ABAP Techie on Sep 15, 2008 12:39 PM
Edited by: ABAP Techie on Sep 15, 2008 12:41 PMbest practise ... don't know ... it is allowed and o.k.
If possible you should of coourse to have no FOR ALL ENTRIES at all !
Joins, there is no general rule, check indexes etc.
The first SORT, I don't that it help for anything, use it together with the delete adjacent duplicates if you expect duplicates in the driver table.
o.k., it can help, if there is a loop afterwards and an append inside, because the new table itab1 is then sorted.
Siegfried -
Can't change my email address for this forum
I need to change my email address for this suport forum, but can't figure out how to do it. If I go to my profile, I can see it but I can't change it. And it's different from my main Apple ID which is set already set correctly with the email address I want to use.
How do I do this?After a long couple of sessions with Apple tech support, here's what I've learned (for the benefit of others):
If you have more than one Apple ID like I do, then the original one that you used to sign into these forums is the one you're stuck with.
You can change that original ID's email address and/or password, but you must keep using that "first" set of credentials. If you try to sign in with your newer Apple ID, it won't work, it'll keep prompting you for the old ID, so make sure you write it (and the password) down somewhere.
I made the original mistake of creating a 2nd Apple ID when I closed an old email account a couple of years ago and needed to stop using that old email address. What I should have done, and will apparently have to pay for forever, was to simply change the email address on the 1st Apple ID.
Bottom line from my experience is be sure to only use one Apple ID. If you create another, you'll be stuck with both for all time and have to use one or the other depending on which one you originally used in a particular situation. For example, when I get a new iPhone, I have to use the old Apple ID to download all the apps 2 years old and older, then sign out and back in with the new ID to download all the apps 2 years old or newer. What a pain, but Apple has no way of combining them. The tech rep said to send feedback, which I've already done. -
Table for Analysis authorization along with values for authorization fields
Hi,
I am looking for table that contains the Analysis Authorization name along with values for all the authorization fields within this Analysis Authorization. Individually i can go to PFCG or Rsecadmin but since i need all the Analysis auth objects, i need to get this info into excel, so need a table.Hi Prashanth
You can check RSECVAL that is appropriate for your requirement please let us know if any further help is needed.
Thanks & Regards
Santosh Varada -
I have the following SELECT statement:
SELECT recn, recnroot, ippers
INTO CORRESPONDING FIELDS OF TABLE <ITAB1>
FROM CCIHT_IP
FOR ALL ENTRIES IN <ITAB2>
WHERE ippers = <ITAB2>-ippers
AND valfr LE sy-datum
AND valto GE sy-datum
AND iptype = 'INJ'.
Did a trace, and the SQL executed is:
SELECT recn, recroot, ippers
FROM CCIHT_IP
WHERE mandt= ?
AND ippers IN (?1, ..., ?10)
AND valfr <= ?
AND valto >= ?
AND iptype = ?
FOR FETCH ONLY WITH UR
This is very slow.
To speed it up, I programmatically break up the SQL using a range table:
i.e.: WHERE ...
AND IPPERS IN <RANGE TABLE>
With the range table containing 1500 entries which is near the limit for IN statement. This is much faster.
The question is why with the FOR ALL ENTRIES the IN statement contains only 10 values and not the maximum allowed, is this a database config issue ?Hi,
as Thomas said for this case rsdb/max_in_blocking_factor is the parameter in question.
And yes, Andrew, you are right, FAE parameters should not be changed system wide
since the delivered default values are those values that turned out to be the best values
in systemwide tests.
However you can increase the value on statement level with a hint. So you can have both
the FAE and a non default blocking for a specific statement.
example:
SELECT recn, recnroot, ippers
INTO CORRESPONDING FIELDS OF TABLE <ITAB1>
FROM CCIHT_IP
FOR ALL ENTRIES IN <ITAB2>
WHERE ippers = <ITAB2>-ippers
AND valfr LE sy-datum
AND valto GE sy-datum
AND iptype = 'INJ'
%_hints db2 '&max_blocking_factor 500&&max_in_blocking_factor 500&u2019.
Use with care.
Kind regards,
Hermann
Maybe you are looking for
-
I'm trying to migrate my music and pictures over to my new iMac. When I use the migration assistant it connects to my PC fine but it won't let me use the account name and username that I have created as the admin. It requires me to create a new use
-
Browsing and selecting through database link to fill in a form item
Hi I have created a database link named in my application dblink_3 I have a form and report in my application. On the from I have an item called P6_USER_ for which I would like to access a table (trk_user) through the database link I created so that
-
hi, we are working on a tcp/ip socket programming application. We need to ship the client code(class files) by converting it into a jar. The problem: When we are accessing the classes thru the prompt, it runs fine. but when we create a jar file it do
-
Creating NAT for multiple subnets
Hello I want to create a 1 NAT for 5 sub networks on a windows 2008 machine the sub networks are; 192.168.224.0/27 192.168.224.32/27 192.168.224.64/27 192.168.224.96/27 192.168.224.128/27 I intend to have a server on the 192.168.224.0/27 sub network.
-
Can no longer attach or insert pictures into aol mail or craigslist
I can no longer attach or insert a picture into my aol mail. It freezes. Itry to attach pictures for a Craigslist ad and it freezes. The picture never loads