FAQ 一些在FI操作中能用到的IDOC知识 (4)
Combination Options for Classic G/L and New G/L Systems
Remember: When New G/L is active (sending or target system) then the message type is checked in the IDoc inbox/outbox:
No processing of FIDCMT/FIROLL! (Error status in the target system).
In general, complete FI documents can always be sent:
Scenario 1: New G/L is active in the non-central system, but not in the central system.
The central system doesn't recognize the ledger/group.
>>>The incoming document is posted as a normal document.
Note: Ledger-specific documents become generally valid.
Scenario 2: New G/L is active in the central system, but not in the non-central system.
>>>The documents are posted with the ledger group "Space". This means they are updated in the leading ledger
and in all ledgers activated in the company codes.
*No system adjustments are required.
Dear [Maesus],
I have tried to duplicate the issue, I saw it only once when I reflash the BIOS and then change the CPU clock setting.
My procedure as below…
1. Boot system
2. Update BIOS to 1.9 version
3. Restart the system to BIOS setting
4. Change the CPU Bus Clock to 229
5. Save the setting & exit and then the system restart automatically
6. And then I saw the CPU is only running 1.86GHz (my CPU is 3.2GHZ FSB 800MHz)
But I would like to explain that my procedure as above is incorrect.
The correct procedure should be as below….
1. Boot system
2. Update BIOS to 1.9 version
3. Restart the system to BIOS setting
4. Load BIOS setup default first
5. Change the CPU Bus Clock to 229
6. Save the setting & exit and then the system restart automatically
7. And then I saw the CPU is running 3.66GHz (my CPU is 3.2GHZ FSB 800MHz)
Note: To load BIOS setup default setting after reflash BIOS that is because all original default setting will be erase after upgrade BIOS. So we always recommend customers to load BIOS default setting first before change any BIOS setting.
BTW, we have updated the BIOS version to support Prescott CPU. Users can decide to update it or not.
The new release BIOS as attach file.
Best regard!
[MSI Staff]
Similar Messages
-
Sending FI documents in New G/L
1. Sending the entry view (BKPF/BSEG)
- Entries in BKPF and BSEG/BSEG_ADD are required in the target system.
- With IDoc type FIDCCP01/02. Corresponds to the document structure, additional fields were included (e.g. ledger group)
- Update the new G/L in the receiver system when posting the IDoc according to the central settings (split)
2. No seperate sending of individual items FAGLFLEXA
- Reference between BKPF/BSEG and FAGLFLEXA cannot be created in the target system (no technical keys exist).Sending FI documents in New G/L
1. Sending the entry view (BKPF/BSEG)
- Entries in BKPF and BSEG/BSEG_ADD are required in the target system.
- With IDoc type FIDCCP01/02. Corresponds to the document structure, additional fields were included (e.g. ledger group)
- Update the new G/L in the receiver system when posting the IDoc according to the central settings (split)
2. No seperate sending of individual items FAGLFLEXA
- Reference between BKPF/BSEG and FAGLFLEXA cannot be created in the target system (no technical keys exist). -
Why is there no FIDCMT or FIROLL in New G/L?
1. For the seperate posting of FI document lines as individual items or as an account balance:
- Base line item might be missing for the document split in the target system (complete FI documents required).
- G/L account postings (expense/revenue) are aggregately transferred as an account balance. The document split,
which corresponds to the posting in the sending system, thus becomes impossible (the account assignments are
lost).
2. Limited functionality of IDoc type FIDCMT01:
- No central tax reporting possible because BSET information is not sent.
- Vendor net procedure only possible to a certain extent by using a workaround
- No support for extended withholding tax.
*Check the message type in the IDoc inbox/outbox: No processing of FIDCMT/FIROLL if New G/L is active.I explored everywhere with the Menu key when I got my Zen this weekend and found several tidbits, such as adding the 'submenus' to the top level menu, rearranging the menus, neat things like "Look up Artist" to view other albums by the same artist, etc..
I haven't looked on the CD but so far I've found really no documentation on the operation of the player, so maybe these things are covered in a manual I haven't seen.
Must say, coming from a Zen Xtra, this player has a lot of neat little features. -
Provide ALE and IDOC Faqs and all Transactions
Dear Experts,
I am new to ALE & IDOC.
Please provide ALE & IDOCs FAQs and all Transactions?
Thanks in advance.<b>FAQS</b>
A L E
Q: Our IDOC remains in status 51 ( not posted) while testing ALE setup by passing DEBMAS02 Idocs. The message 'Field KNA1-BRSCH is not an input field'. This is the Industry key. What are we missing?
A: Go to IMG - menu path IMG->LogisticsGeneral-> Logistics Basic Data: Business partners->Customers-> Control->Define Account groups and field selection for customer.
Select sold-to or ship-to. Select General Data. Select control and double click. Industry key is found here. Change the option to 'Optional Entry'.
Check OSS 5599. You may have to update view V_T078D also.
E D I / IDOC
Q:1 We created an EDI Vendor and created all required output conditions. However no IDOC is generated when PO is printed. Why?
A: Go to Header->output for the PO. The output type shall be '6'. The status shall be '1'. If the status is '0' check the timing. If the status is '2' , go to 'GOTO->Processing Log' and the explanation for non-generation of IDOC can be seen.
Q: How can we create / upload IDOC's from legacy system to SAP?
A: Third party tool Mercator may be used to convert Legacy files to Idoc format. Mercator provides an IDOC tree import facility, SAP provides the export facility. You can transfer the Idoc layouts from SAP to Mercator automatically and then map.
Q: We want to receive an outbound EDI 855 IDOC only if E2EDP20 -scheduling confirmation segment is present. Else get an "error" status preventing triggering the EDI subsystem.
A: User exit logic has to be added in function IDOC_INPUT_ORDRSP.
Set up a test flag and set it off when the IDOC header is read.
Turn the flag ON when the EDP20 segment is read.
Interrogate this flag when the next segment after EDP20 in the same IDOC comes in. If it is on ,you have an EDP20 coming in.
Issue an error status 51 with suitable message for whichever condition you don't want the IDOC to be processed, This will stop the IDOC from posting.
Q: Where ever PO is sent to the vendor via EDI, we want an acknowledgement of the PO by vendor. Which fields are updated and what should be my procedure?
A: Execute Program: IDOC_INPUT_ORDRSP
Process code: ORDR
Message type: ORDRSP
IDOC: ORDERS01
The confirmation process allows the supplier to return an acknowledgment. Only Dates and quantities can be changed The information is stored in the PO and can be viewed via Item->Confirmation->Overview. The PO can be flagged as 'confirmation required' so that Pos without acknowledgement receipt can be monitored. Control keys and tolerances (days and quantities) have to be customized.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
<b>Reward Points if it helps,</b>
Satish -
Can any body send me the Faq's on ALE/IDoC ?
Can any body send me the Faq's on ALE/IDoC ?
hi,
check these...
http://www.onestopsap.com/interview-Question/ale/
http://sap.ittoolbox.com/groups/career/sap-career/aleidoc-interview-questions-688290
http://www.erpgenie.com/faq/ale.htm -
hi,
Any one please tel me where can i find faq's on idoc adapters?
thank u
Swari.HI
Check with XI FAQ here
The specified item was not found.
More than this specific you can search SDN
Thanks
Gaurav -
1. Where can i find ale/idoc faqs...
2. where can i find the question realated to ale/ idocsHi Bala,
ALE FAQ's
http://www.erpgenie.com/faq/ale.htm
ALE/IDOC
http://searchstorage.techtarget.com/general/0,295582,sid21_gci1110008,00.html
Hope this helps.
Regards,
-Priyanka. -
Hi Friends,
I would like to know where can i get FAQs on ALE/Idoc and BAPI..
Thanks..
AbdulHere are some links
http://searchsap.techtarget.com/general/0,295582,sid21_gci1110008,00.html
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://help.sap.com/saphelp_nw04/helpdata/en/43/b46c4b53c111d395fa00a0c94260a5/content.htm
Regards,
Rich Heilman -
Issues in IDoc Sender Scenario:IDoc with errors added
Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
ChilankaHi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
IDOC not received in XI; error in SM58 of sending system
Hello everybody,
we got a SAP CRM sending a "generated" IDOC.
(IDOC-Type: CRMXIF_PARTNER_SAVE01)
The IDOC seemes to be rejected by XI because
SM58 shows:
- No Service for System Binding_Error Client ...
- function: IDOC_INBOUND_ASYNCHRONOUS
All settings (IDX1, IDX2, ID, IR) are OK!!
All reimports (delete & import IDOC) are made!!
(btw: we got several other IDOCs-Types that work fine!)
Could it be, that the IDOC-type is GENERATED?
Regards MarioHi Mario,
Solution for this error is provided in link given below
of Problem Analysis Guide "Sending an IDoc through XI Failed "
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Also have you set adapter specific identifiers?
For the same, refer question 3 (integration engine section)
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
Abhy -
About back-end adapter and IDoc
Hi everybody!
I was watching in the FAQ of Mobile 7.1 about the possibility to use IDOC as a mechanism to push data to DOE, but this document only says: "IDocs are supported only for back-end-triggered scenarios" and provides a link to configure ALE between the backend and DOE, but the link doesn't work. (Somebody has this information on a link that works?)
I'm trying to find any information, blog, article, how-to guide, however I cant found anything. Anybody has documentation about how to configurate and implement a backend-adapter to push data from the backend through IDOC? Any information will be welcome.
Thanks in advance.
Best regards,
Simon.Hi San,
You will have to look after this in Tansaction SE80. Open the BSP application cProjects, and find the appropriate view. (The naming convetion will help a little). Open the view tab: layout >> e.G. progAssignedPha.bsp Here you will find what BSP elements it consists of. You will find the
<htmlb:tableView and <htmlb:inputField ... elements.
Here you will find the information you are looking for.
As easy as in SAPGui you can not find out this information.
Regards. -
Some faqs can u solve dis answers asp
1) How do u handle table control in bdc?
2) What is diff b/w normal functional modules and BAPI's fm's?
3)what is fct-code of at- line- selection?
4)why do u use subroutine pool in scripts?
5)name few performance techniques?
6)in how many ways u can design interactive reprt?
7)what is the need of table maintainance option at the begin of table creation?
8)what is the system landscape?
9)what is the use of submit command in exe program?
10)how do u create secondary index?
11) what is the diff b/w sap memory and abap memory?
what is the max size of date records?
2)what is the max size of IDOC?
3)what is the relationship b/w ALE and EDI?
4)when u have data transfer, why do u chose IDOC's?
5)i have 200 records how u decide how many records should execute per IDOc?
6)ALE customizing method?
7)how do u define logical systems and assign logical systems to clients?
8)what is change pointer technique?&what is need of change pointer technique?
1) name the events in order in case of classical report?
2)if i put write statemnt in at slection-screen,does it works?
3)can u call multilple selctio screen in one report?
4)what is diff b/w integration & at slection-screen ouput?
5) i have a requirement like i have 3 radio butons in one group,
if i select one radio button then remaining radio buttons are invisible what is the code for this?
6) how do u decide which method is suite for paricular requirement if not specified in bdc?
i.e session or call transction?
7)what is BAPI?
8)how BAPI differ from ALE?
9) steps of configuring of EDI?
10) is layout set is client dependent or not?
11)how to transfer layout sets to test client side?
12)what is the protect......end protect?
13) for what purposeu create multiple wqidows in one page?
14)what are diff areas wher ucan ouput text in main window?
15)what method u use to output text in (top........endtop) or write_form?
16)what is the reason for use of write_form rather than top------endtop?
1)i need a logo on the right hand side of corner . how do u handle that?
2)what is the standard table for storing standard symbols?
3)how do u represent page no in scripts & total page nos?
4)what is the transaction code for dump analysis?
5)when top-of-page vent triggred?
6)can i plce write stament in any event?does it works?
7)what is the use of end-of-selection event?
8)what is stop& exit?
9)what happens if i plce write statement in end-of-selction?
10)what is sy-ttill?
11)does the value of sy-subrc chnge after if and write stament?
12)what is bdc & types of bdc?
13)when do u choose session , call transaction methods?
14)how may types of symbols? what are they?
15)what is the diff b/w constant & variable symbols?
16)what are the parameters in open_form & start_form?
17)does text orientation(190degrees ,145 degrees) is possible in sap scripts?
18)how do u delete text from a layoutset window?
19)what are u need to take care while transporting the request? for exeampl u developed a exit ,whta care do u take?
20) what wil u do for preparing technical specs form functional specs?
21) what is addres....endaddress in sap scripts?
22)which method do u prefer synchronous or asynchronous?
23)what is output type?
24)what does slection-screen of RBDMIDOC contains?
25)what parameters u specifyng in RFc destination?
26)what customiging y do to transfer the data from one logical systme to another logical system?
27)can u explain brifely how idoc's genrated?
28)if i just extend the idoc, what are the things u need to do?can i extend the same ouboud program?
29)can u just explain what partner profile contains?
30)what are process codes?
31)if i just develop a gui status using pf-status.is it confined to single program or can be used for any other programs?
32)what is client?
33)what is diff b/w se01,se09,se10,stms transction codes?
34)what is the diff b/w select single * from kna1 and select * from kna1 for all entries?
35)in subroutines paramaters are changing & using .what is the diff b/w them?
1) what is the diff b/w scripts & smart forms?
2)what are the function module used in smart forms?
3)what are the function module? what is the use of them?
4)what is the index? what is the secodary index ? whta is uses of them?
5)what is the table technical characteristics?
6)waht is buffering? types?
7)what is the use of interactive reprt?
8)what is the use of alv?
9)what are problems u have faced when u r doing projecs?
10)what is the diff b/w template & tables?
11)which function module used for transferring from one version to anthoer version?
12) what determines the sequence in events blocks are processed?
13)in what case are otional parameters allowed in the passig of parameters?
a) functions b) forms
14)what relationship can be esatblished in watch points?
15)what are requiremets of reading hashed internal table?
16)what does a context object provides?
17)what access methods are avaliable for accessing internal table?
18)what operations are allowed when processing data of records in internal table?
19)what tasks could be performed in SAPNET?
20)what is search help?
21)what is the lock object?
22)what is diff b/w domain and data elemnt?
23)what is diff b/w check table and value table?
24)what are the control break statements?
25)how to display SUM?
26)what is the diff b/w select single & select upto one row?
27)collect what it did?
28)how to findout data in internal table?
29)syntax for describe statement?
30)hwo to findout if internal table is empty or not?
31)hwo to transfer data from one internal table to another internal table?
32)how to modify internal table?
33)Read statement syntax?
34)what is the default event?
35)i have write only top-of-page event in that write: / 'welcome' what will happen?
36)what is message-d?
37)what is the diff b/w with events & without events?
38)what is the purpose of Direct input method?
39)what is local object?
40)is it possible to back ground process in call transaction? how?
41)what are diff types of errors?
42)what are the diff types function modules used in layout set?
43)what is the diff b/w open_form & start_form?
44) how to define logo?
45)after modification how to send modified form to modified print program?
46)what are the symbols in sap scripts? functionality of them?
47)how to write a Report in another Report?
48)syntx fr submitt &what it did?
49)what is the land scape of ABAP?
50)what is index? types?
51)hwo many secondary indexe are possible to create?
52)what is diff b/w select single * from & select upto one row?
53)in my 100 records 55th record is need some changes and that record how to send body to header line?
54) what is the use of indexs?
55)what is the diff b/w page area & roll area?
56)diff b/w interface & conversion?
57)how we configured ports andpartner-profiles?
58)what si the Enhancement and what u had did with user-exist?
59)who can extend Idoc?
60)how many types of select staments?
61)what is header line?
62)what is diff b/w internal table work area & table work area?
63)if we don't have header line what will happen?
64)when the user-exist will triggered? for which purpose u have used and where u have written?
65) how we linked the tables?
66)in at selection-screen and at user-command event which one is triggred?
67)what is the use of at pf-status? where did u use it?
68)is it possible to run Host command inSAP environment? how do u run it?
69)what are user-exists? what is involved in writting them? what precautions are needed?
70)what is the version management?
71)if u send the objects from dev server to production server,but get some bugs so those bugs how to handle?
72)if u upload the data after that. i din't put committ,then what happen?
73)how to maintain dataintegrity?
74) how to validate fields?
1)how u connect the unix platform from SAP server?
2)what is database object ? Runtime object?
3)How to populate BDC table control?
4)How to implemnt intreactive list in alv?tell me fumnction module for that?
5)How to transfer from data list to transactions?
6)How can u add anew field to Script?
7)what are problems in processing batch input session?
8)diff b/w select-options & ranges?
9)what is meant by satck list?
10)if u don't have header line for internal table what will happen?
11)what is the max no of calling modes stacked at one time is?
12)what is collect command ? how it is works?
13)if u want come back from 15th list to basic list waht will u do?
14)what is the default mode of transfers data to and from application server?
15)what is the purpose of EXTRACT parameter?
16) how will u delete duplicate records from internal table?
17)in for all entries clause of select statement ,if internal table is empty what will happen?
18) How can u find the no of records in a table?
19)Billing and invoice details are where stored?
20)what is the typical structure of ABAp program?
21)what is diff b/w ABAP program &user defiend program?
22)can a transperent table exists in a data dictionary and not in the physical database?y/n
23)diff b/w Collect & Append?
24)logical unit of work means?
25) How many types of lock objects exists? what are they?
26)what will u don inSPRO?
27)how many tyeps buffers?
28) what wil do by Maintainance generator?
29) what is o/p type? what is done by this?
30)program for BAPI?
31)what is ALE implementation progarm?
32) say the function code to catch function code F2?
33) what is IDOC& how u can extend the IDOC?
34)what is the advantage of LSMW?
35)how many types of symbols u have on scripts & in which order they can executes?
36)what is purpose of data conversion into SAP format from Legacy?
37) what si the t-code for watch the flat file in application serever?
38) what is purpose of driver program?
39)what is contents of Functional Spec?
40)what is contents of Technical Spec?
41)How do u diasble a control in a selection-screen logic?
42)what is source structure?
43)what is target structure?
44)if u don't have the access to modify the print program then how do u insert the text elemnts?
45)how can u call report in another program?
46)specify the events for classic & intractive reports in order?
47)say some usally used system fields in our programs?
48)how can u create check box in alv?
49)diff b/w select-options & parameters?
50)how can u create labels in scripts?
51)how u display the data in scripts?
52)What is the diff b/w At selection-screen output & initialization?
53)how u trap the errors in call transations?
54)diff b/w scripts & smart forms?
55)types of internal tables & explain them?
56)how many types of loops?
57)Diff b/w Synchronous & Asynchronous RFC
58)How u place data in table cotrol?
59)what are the methods execute in LSMW?
60)diff b/w sy-index & sy-tabix?
61) in call transaction bckground process which mode u prefer?
62)what is configuration of ALE?
63) what are all read operations in itab?
64)diff b/w search help & pov, which one trigger first?
65)where u can u do the validations in report?
66)what are the events in Module program?
67)diff b/w call transactions & session method and wher trap erros in both methods? how?
68)diff b/w scripts & reports?
69)how u define text elemnts inscripts?
70)what are the function modules inscripts?
71)how u diplay the data in scripts?
72)how do u do the perfomance testing?
1)when it wll triggerd initialization event? Before how many events will triggerd?what are they?
2)how many types of meaasges ?
3)what is use of Dump analysis?
4)what is the use for all entries?
5)what Is the diff b/w check & continue?
6)whenever use EXIt statement whappend in loop endloop and within subroutines, within start-of-selection ,with in end-of-selectio and in initialization?
7)what is the diff b/w value table and check table?
8)in data element level I used search help and in domain level I used value table which will be shows our criteria?
9)without doing any changes in printprogarm I want to add some fields how can?
10)how many mainwindows in one page? What is the use of remaing main windows?
11)what is sy-index & sy-tabix?
12)what are the qualities u have to maintain to ur developments?
13)Smart forms are client independent how u justify that?
14)in keyindexex what is the relationship 1:n?
15)in dynpro how can insert radio butto?
16)How can u use search help?
17)in MEDRUCk(ME21) I have changes some fields so immediate those changes send to Vendor through e-mail or fax? What is procedure?
18) I worked in foreground one session successfully so tommarow I have to work same session in back ground then what happen?
19)in bdc table control wher u have to face problem?
20)In alv grid control at the top I want header/ how can u display?
21)how can u print long text in scripts?
22)how to display Text every 4 lines after?
1)how can u create u r own types in an ABAP report?
2)which system variable is encounted in loop counter?
3) which system variable is store the record counter?
4)does a select statement carry out any authorization chek?
5)what is function of environment variable sy-lisel in interactive reports?
6)how can we identify which button is pressed?
7)diff b/w se09 ,Se10?
8)table in which entry for development class is made?
9)which client is authorized to create the workbench oragnizer configuration?
10)can we provide more than one PBO PAI for one screen?
11)which view can even possess one table?
12)What are field symbols?
13)which is ued to release to lock?
14)what are the various types of customer exists?
15)what is port?
16)what are the selection-text?
17)can we use perform in SAP scripts?
18)what is the t.code for table maintainance?
1)write validation logic for parameters option? Wher do u write ?(in at selection-screen or start-of-selection)?
2)what is the diff b/w IN jn where condition and without IN condition in where condition?
3)how can u display 21st secondary list ?explain procedure?(code?)
4)what is the diff b/w sorted and hashed tables?
5)can write statement in initialization triggers first or write statemnt in start-of-selection?
6)what can ud o if have no authorization to recording in BDC?(without F1 and Technical help)?
7)what is the diff b/w SAPLUW and DBLUW?
8)expalin VPN process?
9)what is the text in reports and scripts?
10)how can u release ur objects to end user?
11)write genereal statement to display dat-range?
12)explain pricing procedure in sap?
13)how can u display barcodes in sap scripts?
14)explain flow of S.D?
15)what are the performance techniques expect Modularization techniques I want remaning?
1)what is the purpose of initialization?
2)what are control break statements?
3)what is the diff b/w at new and on change?
4)what is the use of end-of-selection?
5)in Runtime analysis what ar the main area will be displaying for tunnning?
6)what are the ways to improve the performance the report?
7)What is the diff b/w maintainance view and databe view?
8)what are the type of search help?
9)what is the diff b/w include structure and append structure?
10)how can we generate new item in BDC program or the transaction ME21?
11) in calltransaction while transferring the data what happens idf the power goes off?
12) what are the standard programs for transfer the data for material master and vendor master?
13)whare we can assign the page size?
14)how can we call a subroutine in scripts?
15)how many max pages we have to design for script ?
16) what is use of protected and end protected?
17)what are the types of functional modules?
18)how many types of screen filed validations? What ate they?
19)how to convert the scripts to smartforms?
20)what is the history of purchase order? Wher is it store?
21)can we debug smartforms ?
22)what is the material history and where is it store?
23)what are the functional modules ued in ALV?
24)what is the fieldcatalog merge use?
25)how u print the heading in ALV ?
26)what is the t.code for BDC?
27)what is the purpose of application server?
28)what are the text elements ? what is the use of text elements ?
29)how u create vertical line and horizanatal line in reports?
30)what is the purpose header line?
31)what is the purpose of occur clause?what default area it occupies?
32)what are text elements?
33)how many secondary indexes we can create for a table?
34)What is the ue of st05?
35)what is the foriegn key table?and check table?
36)what are some essential steps for loggig changes made to SAP data?Hi Mahesh,
Very good questions. Infact it's very difficult to answer all the questions.
You can search many FAQs in net...
If you have any specific questions related to single topic, Post message for each.
I can send some of FAQ documents to u
Answers
1) Using Index like Field(1)-1st record field , Field(2) - 2nd record field etc... in Table control.. we can handle BDC
2) BAPI will be programmed using OO concepts more.. and as Interfacing is more enhanced here than normal FM.
etc...
Regards,
Manjunatha -
How to Map Idoc-Orders05 Qualifier permitted values to a flat file Str
Hi All,
My scenario is IDoc-xi-flat file. I have a problem in mapping the respective qualifier value in IDoc to the flat file structure. I am using the function fix values in Message Mapping. Suggest how should the target field should look like to map to the qualifier.
Thanks
Gowri K.hi,
can you tell a little bit more on what are you trying to achive?
do you only need one qualifier in file or all or what?
can you use the same structure as in IDOC ?
be a little more precise
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Hi guys ,
This is SuryaNarayana . I have collected some faqs from www.**************** but they have no answers please answers these questions
Questions are releated in to XI-BPM
1. Business Process Management is concerned with ?
a. Processes within and across applications
b. Planned or spontaneous Human interaction
c. Automating, streamlining, managing business processes
d. Moving process control from application to technology layer
e. All of the above
2. Which open modeling standard ccBPM adheres to?
a. BPEL
b. XML
c. WSDL
d. None of these
3. High-Tech industry ccBPM implementation guidelines are known as ?
a. RosettaNet Implementation Framework
b. CIDX
c. Marketpalce
d. SAP BC
4. Individual "Swim Lane" in BPM modelling contains ?
a. Business Scenarios from same company
b. Business Scenarios from same Application
5. Different Panes within BPM editor in IR ?
a. Header
b. Editing
c. Process Overview
d. Property
e. Output
f. Object
g. All of the above
6. Data Declaration of the Business process can be viewed in ?
a. Correlation in Object area
b. Container in Output area
c. Container in Object area
d. None of these
7. Which of these is not Messaging relevant Step type ?
a. Receive
b. Send
c. Transformation
d. Receiver Determination
e. Block
8. Control Step can be used for, except ?
a. Terminate current process
b. Trigger an Exception
c. Trigger an Alert
d. Define different processing braches for process
9. Which of the following triggers process to start?
a. By receiving amessage assinged to receive step
b. Batch job by scheduling in WAS
c. Both of these
d. None of these.
10. To route response messages to the
correct process instance, _______ object is used ?
a. Correlation
b. Interface
c. Adapter
d. Mapping
11. Correlation handling is handled by ?
a. BP engine
b. Integration Engine
c. Adapter Engine
d. None of these
12. Container element can be typecasted to, except ?
a. simple XSD/XML Schema
b. Abstract i/f
c. Receiver
d. Multilne(vector)
e. Sender
13. Outer Container block has container element 'O' and inner Container block
has container element 'I'. Then which of the following is true?
a. Both 'O' and 'I' are visible in outer block.
b. Both 'O' and 'I' are visible in inner block.
c. Both of these.
d. None of these.
14. Simple Fork process step terminates when ?
a. All branches are true.
b. All branches are false.
c. Either true.
d. Either false.
15. Collect process pattern types includes ?
a. Condition
b. Receiver message
c. Append message
d. Increase counter
e. Merge message
f. Send message
g. All
XI-Releated questions
1. SAP XI is an Integration technology and platform?
a) for SAP and non SAP applications.
b) for A2A and B2B scenarios
c) for asynchronous and synchronous applications
d) for cross-component Business Process Management.
2. XI represents the following layer in the NetWeaver stack:?
a) People Integration
b) Information Integration
c) Process Integration
3. XI uses the following web standards ?
a) WSDL
b) XSD
c) SOAP
4. XI components include?
a) SLD (System Landscape Directory)
b) Integration Builder
c) Integration Server
d) Central Monitoring
e) Adapter Engine
5. Integration Builder is a?
a) Java application
b) ABAP application
c) .NET application
6. Java Web Start is required for?
a) Caching java clients
b) Drawing pictures
c) Connect to SUN systems
7. SLD is a?
a) Client application
b) Server application
8. XI is technically a client of SLD?
a) TRUE
b) FALSE
9. SLD adheres to?
a) Common Information Model
b) Web Services Definition Language
c) XML Schema Definition Language
d) XML
10. Usage of PCK (Partner Connectivity Kit) ?
a) Allow small partners and subsidiaries to communicate natively with XI
b) For Partners to connect to database systems7444
c) Allow Partners to connect to .NET and Java applications
11. Certain adapters are needed in cases where the Integration Server
is to exchange messages with an R/3 system based on basis kernel lower than?
a) 6.10
b) 6.20
c) 6.40
d) 4.5
12. XI supports the following QoS (Quality of Services)?
a) BE (Best Effort)
b) Exactly Once (EO)
c) Exactly Once In Order (EOIO)
d) Exactly Twice In Order (ETIO)
13. QoS BE is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
14. QoS EO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
15. QoS EOIO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
16. Adapter Framework is based on ?
a) JCA (Java Connector Architecture)
b) NCA (.NET Connector Architecture)
c) PCK (Partner Connectivity Kit)
d) WSDL (Web Services Definition Language)
17. XI Adapter Engine is based on the integrated?
a) ABAP engine
b) J2EE engine
c) .NET engine
d) JCA (Java Connector Architecture)
18. Integration Processes are built using?
a) WSDL (Web Services Definition Language)
b) BPEL (Business Process Execution Language)
c) XSD (XML Schema Definition Language)
d) JCL (Java Connector Language)
19. Runtime Workbench in XI is the central monitoring tool for the following?
a) Component Monitoring
b) Message Monitoring
c) End-to-End Monitoring
d) Performance Monitoring
e) Queue Monitoring
f) Schedule Monitoring
20. XI uses enhanced version of SOAP protocol called?
a) XI XML
b) XI SOAP
c) XI XSD
d) XI PML
21. What is the cardinality of MESSAGE TYPES : DATA TYPES ?
a) 1:1
b) 2:1
c) 2:2
d) 1:0
22. What are the advantages of ASYNCHRONOUS updates?
a) Acknowledgement can be sent back
b) Messages can be persisted.
23. What are the advantages of SYNCHRONOUS updates?
a) Acknowledgement can be sent back (messages can be persisted with additional configuration)
b) Messages can be persisted.
c) Messages cannot be persisted.
24. What is the Message format used in XI for processing?
a) Specific implementation of SOAP which is XI XML
b) JMS
c) RFC
d) CIDX
25. What is an Adapter?
a) Adapters are used to communicate to Legacy or SAP systems with WAS version < 6.2
b) Adapters are used to retrieve information from Java, .NET systems
c) Adapters are used to import IDOC, RFC information.
26. In the Integration Repository, what is the KEY of an
object or how can an object be uniquely identified?
a) SWCV, Namespace, Name
b) Namespace, Name, Description
c) Name, Description, SWCV
d) SWCV, SWCV1, SWCV2
27. How do you classify NAME SPACE in an R/3 Environment?
a) Equivalent to function group
b) Equivalent to development class
c) Equivalent to function module
d) Equivalent to BAPI
28. What is ICM?
a) Internet Console Manager
b) Internet Communication Manager
c) Infrastructure Communication Manager
d) Intranet Communication Manager
29. A Customer has WAS 6.2 and has decided to use XI?
a) He cannot use XI unless WAS 6.2 is upgraded to WAS 6.4
b) Can use XI with some additional patches
c) WAS 6.2 already has XI in it. No need of any additional software
30. What is the name space of an IDOC?
a) urn:sap-com:document:sap:idoc:messages
b) urn:sap-com:document:idoc:sap:messages
c) urn:sap-com:sap.document:idoc:messages
d) urn:sap-com:document:idoc:messages
31. What is the name space of an RFC ?
a) urn:sap-com:document:rfc:sap:functions
b) urn:sap-com:document:bapi:rfc:functions
c) urn:sap-com:document:sap:rfc:functions
d) urn:sap-com:document:remote:rfc:functions
32. What doesnt get transported when the configuration is released?
a) All Objects will get transported
b) Generated proxies and application coding in the application
components does not get transported when the configuration is released.
c) Only application coding will not get transported.
d) Only generated proxies will not get transported.
33. How many Pipelines are there in the integration server?
a) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding, Call Adapter, Request Message Mapping.
b) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding.
c) Message Branch, Request Message Mapping, Outbound Binding,
Call Adapter, Request Message Mapping.
34. What are the possible Trace Levels?
a) 0 No Trace,1 Low Trace Level,2 Medium Trace Level,
3 High Trace Level,4 Expert Trace Level
b) 0 No Trace,1 Low Trace Level,
2 Medium Trace Level,3 High Trace Level
c) 10 Low Trace Level,20 Medium Trace Level,
30 High Trace Level,40 Expert Trace Level
35. Does JMS adapter need additional driver to communicate to database?
a) Yes
b) No
c) JMS adapter is not available in XI
36. What is use of PCK?
a) Partner Connectivity Kit that helps Partner Systems with no ability
to communicate in XML speak to the Business Systems.
b) PCK is used to deploy additional drivers
c) PCK can be used as an alternative to XI
37. What is Context Object? What is its role?
a) Context Objects are pointers to a specific element within the message,
for future reference. Encapsulate the access to data that is contained
in the payload or in the header of the message.
b) Another form of data types
c) Can be used instead of message types
38. What adapters dont need Sender Agreement?
a) HTTP, IDOC.
b) IDOC, RFC
c) IDOC, JMS
d) JDBC, JMS
39. What is the Protocol followed for Mail Adapter?
a) SMTP
b) IMAP
c) POP3
d) POP4
40. Where do you configure an Adapter?
a) Sender Agreement
b) Receiver Determination
c) Business System
d) Communication Channel
41. Can a JDBC adapter query the database table?
If yes, what are different possibilities?
a) Yes. You can configure sender and receiver communication channels.
A special XML format is defined for content coming from the
Integration Engine. This canonical format enables SQL Insert,
Update, Select, Delete or stored procedure statements to be processed.
A message is always processed in exactly one database transaction.
b) JDBC adapter cannot insert records in the database.
c) We should not insert, update records in the database directly.
42. The message monitoring status DLNG means ?
a) DLNG = Delivering.
b) DLNG = Dialing
c) DLNG = Detailing
d) DLNG = Dismantling
43. Where do you perform Content Based Routing?
a) Receiver Determination
b) Receiver Agreement
c) Sender Agreement
d) Communication Channel
44. What are the various supported mapping types?
a) Message Mapping, Java Mapping, XSLT Mapping, ABAP Mapping.
b) XSLT, Java, JDBC, JMS
c) XSLT, WSDL, XSD
45. With respect to ABAP proxies,
what are the methods that can be coded?
a) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCHRONOUS.
b) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCH.
c) EXECUTE_SYNCH, EXECUTE_ASYNCH
46. Fields under a node with a minoccurs of ZERO has been mapped.
The values dont appear in the target result, what could be wrong?
a) The parent node has not been assigned.
b) Parent node has cardinality 0 unbounded
c) Parent node has many fields
47. What is a SENDER COMM CHANNEL?
a) Sender Communication Channel is where you define the source system from
where the message/information goes to XI and also the adapter, the Sender System uses.
b) Sender Communication Channel is where you define the target system from where
the message/information goes out of XI and also the adapter, the Receiver System uses.
c) Sender Communication Channel is where you define the how the
interface mapping takes place between Sender and Receiver.
48. XSLT is supported but two statements were not supported. What are they?
a) <xsd:include>, <xsd:import>
b) <xsd:including>, <xsd:importing>
c) <xsd:includes>, <xsd:imports>
d) All statements are supported.
49. What steps can be inserted in an Exception branch?
a) Terminate a process, trigger an alert.
b) Terminate the interface, trigger IDOC.
c) Terminate exception, branch integration process.
50. What is multi mapping? When can it be used?
a) Multi Mapping is used to map abstract interfaces and can only be used in ccBPM.
b) Can be used when there are multiple interfaces from Sender systems.
c) Can be used when there are multiple interfaces from Receiver systems
51. The first step in the Integration process can be ?
a) Receive step
b) fork Step
c) Send Step
d) Block Step
52. An Exception raised by a step can be handled by ?
a) Only by exception handler in the same step
b) Only by exception handler in the outer step
c) By exception handler in the same step or in the outer step
53. An exception is raised by ?
a) Async or sync send step, transformation step and Control Step
b) Sync send step
c) By control step only
54. A message can be received by ?
a) Only a receive step
b) By receive, fork or loop step
c) By receive and block step
d) By send, block and Fork
55. What are the types of containers ?
a) Abstract
b) Simple & Abstract
c) Simple, Abstract and receiver
56. Which of these are true/false with user defined functions?
a) User defined functions are accessible only in the mapping where they are created
b) User defined functions are visible across namespace
c) User defined functions accessed in other mapping by copying it to that mapping
d) User defined functions are accessible in any mapping in a software component version
57. Java Mapping is executed by implementing the interface ?
a) com.sap.aii.mapping.api.StreamTransformation
b) com.sap.api.mapping.StreamTransformation
c) com.sap.api.mapping.aii.StreamTransformation
d) com.sap.mapping.api.StreamTransformation
58. An Idoc has been sent by a sender system to XI, but the idoc is not
received at the XI system which of these could be true/false ?
a) The destination system from the sender system to XI is not configured correctly.
b) The metadata in XI was copied/generated from the sender Idoc is corrupted
c) The destination system from XI to sender system is not defined correctly
d) Sender channel is not configured
59. While mapping which of these is true ? Can I use different mapping ?
a) You can use only one mapping at a time
b) You can use ABAP & JAVA mapping
c) You can use any mapping in any sequence any number of times
d) Different mapping cant be used together
60. To import the metadata from an R/3 system which of this is true/false ?
a) The import permitted in Software component need to be selected
b) You have to create ALE Name in SLD
c) You need to login to the destination (R/3) with a valid user
d) You need to login to destination(R/3) with a User having administrator rights
61. You are implementing XI for your customer, you have very good experience
working in ABAP. While mapping you want to do it in abap, but the option
available are only Message Mapping Java Mapping What would you do to
add the ABAP Mapping option. Where would you configure it?.
a) In Exchange profile
b) In s/w component
c) In Integration Repository
62. From the WSDL description from application server, you can generate ?
a) Java Proxies only
b) ABAP proxies
c) Java and ABAP proxies.
63. JMS adapter can be used for ?
a. IBM web sphere MQ
b. Sonique
c. Web services
64. Which of the following is true/false about HTTP plain adapters?
a. Sender channel is not required to be configured
b. Receiver channel is not required to be configured
c. Using this system can directly connect to integration server
65. You would install Adapter engine de-centrally ?
a. To install PCK
b. To monitor the messages de-centrally
c. To share load with the central adapter engine and increase performance.
66. To Receive the data using Select with JDBC adapter you would ?
a. You would configure a receiver channel
b. you would configure a sender channel
67. You find that the status in transaction SXI_CACHE is
not equal to 0. Which of the following would you perform?
a. Check the condition of BP in Integration Repository
b. Activate the BP in SXI_CHACHE.
c. Activate the BP in Integration Directory
68. Which are the methods that you need to call compulsorily in java mapping ?
a) execute(), setParameter()
b) Exit() Systemproperties()
c) Execute(), SetProperties()
69. What is the relationship between an integration process and business workflow?
a) The Business Process Engine is the same as the Workflow Engine.
b) The Business Process Engine needs external Workflow Engine
c) Business Process Engine is a new name for Workflow Engine
70. What are the different types that a container element can be based on?
a) Simple XSD types : XSD:DATE, XSD:TIME, XSD: INTEGER, XSD: STRING
b) Abstract Integer
c) Receiver
71. Which of the following is true with regards to Container Elements?
a) Elements of a super container are visible in sub container.
b) Elements of sub container are visible in super container
c) Container cannot have super or sub containers
d) Containers can have multiple elements.
72. Send message within an integration process to 8 receivers
at the same time, how can I do this?
a) Create a FORK statement with 8 branches
b) Create 8 interfaces
c) Create a loop with 8 interfaces
d) Create 8 branches
73. Which of the following Objects can be used in BPM ?
a) Context Object
b) Receiver Determination
c) Message Mapping
d) Interface Mapping
74.Could multiple instances of Integration process run at the same time ?
a) Yes
b) No
75. For ABAP mapping which of the following settings have to be done in Exchange Profile ?
a) Com.sap.aii.repository.mapping.additionaltypes = R3_ABAP | Abap-class; R3_XSLT | XSL
b) Com.sap.aii.repository.mapping.additionaltypes = R3_JAVA | Abap-class; R3_XSLT | XSL
c) Com.sap.aii.repository.mapping.additionaltypes = | Abap-class; R3_XSLT | XSL
76. How does Boolean functions work in message mappings ?
a) Boolean functions accept Boolean inputs and result in Boolean values
b) Boolean functions accept Boolean inputs and result in decimal values
c) Boolean functions accept Boolean inputs and result in alphanumeric values
77. While testing message mapping the source message occurs 3 times
but the target message occurs only once? What can be the reason ?
a) Target cardinality is not defined sufficiently
b) Source cannot repeat
c) Message mapping cannot handle multiple values
78. What JAR file is required to perform Java mapping ?
a) aii_map_api.jar
b) aii_map_api.java
c) aii_map_aii.jar
d) None
79. Collaboration Agreement is made of the following ?
a) Sender Agreement, Receiver Agreement
b) Sender Agreement, Sender Communication Channel
c) Sender Agreement, Receiver Communication Channel
d) Receiver Agreement, Receiver Communication Channel
80.What are the three IDOC related transactions in XI ?
a) IDX9
b) IDX1
c) IDX2
d) IDX5
e) IDX3
81.Is EOIO supported by RFC ?
a) YES
b) NO
82. Java Web Start is used for ?
a) Caching Java applications
b) to write Java code
c) to execute Java mapping
d) to perform JMS connectivity
83. Where do you define Usage Dependency?
a) Integration Repository
b) Integration Directory
c) SLD
d) Enterprise Portal
84. For ABAP mapping which class must be implemented ?
a) IF_MAPPING
b) IF_MAPPING_ABAP
c) MAPPING_ABAP
d) MAPPING_EXECUTE_ABAP
85.Component Monitoring in the RWB is used to display
the monitoring of the following components?
a) Integration Engine
b) Adapter Engine
c) Integration Directory
d) Integration Repository
e) Runtime Workbench
86.Does HTTP adapter support QoS BE?
a) Yes
b) No
87.IDOC adapter supports the following QoSs?
a) EO
b) EOIO
c) BE
d) All the above
88.The Client has decided to user HTTP adapter as Sender.
Which transaction should be used to configure the HTTP adapter?
a) SICF
b) SMICM
c) SM59
d) SE80
89.The following transaction is used to monitor XML messages in XI ?
a) SXMB_MONI
b) SM59
c) SXMB_ADM
d) SICF
90.File adapter has the following QoS?
a) BE
b) EO
c) EOIO
d) BEIO
91.When FILE adapter as Sender, we do not need Sender agreement ?
a) Yes
b) No
92. File Sender communication channel can be used by only one Sender agreement ?
a) True
b) False
93. SOAP adapter uses the following message protocol:?
a) SOAP 1.1
b) SOAP 1.2
c) SOAP 1.9
d) SOAP 1.3
94. Using the following URL we can display the content of CPACache?
a) http://<host>:<J2EEport >/CPACache
b) http://<host>:<J2EEport >/AdapterCache
c) http://<host>:<J2EEport >/CPACatch
d) http://<host>:<J2EEport >/CPACache/index.html
95. The following URL can be used to display the Adapter Status in XI ?
a) http://<host>:<J2EEport >/AdapterFramework
b) http://<host>:<J2EEport >/AdapterFramework/RFC
c) http://<host>:<J2EEport >/AdapterFramework/rep
d) http://<host>:<J2EEport >/AdapterStatus
96. Which security role need to be assigned to access the CPACache ?
a) xi_af_cpa_monitoring
b) xi_af_cache_monitor
c) xi_af_cpa_monitor
97. The following URL can be used to manually refresh the CPACache?
a) http://<host>:<J2EEport >/CPACache/refresh=delta
b) http://<host>:<J2EEport >/CPACache/refresh?mode=full
c) http://<host>:<J2EEport >/CPACache/refresh?mode=all
98. The Objects from repository are accessed from directory using user?
a) XIDIRUSER
b) XISUPER
c) XIAPPLUSER
d) XIADMIN
99. Information about the central and decentral Adapter
Framework installations is maintained in ?
a) SLD
b) CLD
c) IR
d) ID
100. Special drivers required for JDBC, JMS adapters can be deployed using ?
a) SPM (Software Procurement Manager)
b) SDM (Software Deployment Manager)
c) SCM (Software Change Manager)
d) SOM (Software Ownership Manager)Hi guys ,
This is SuryaNarayana . I have collected some faqs from www.**************** but they have no answers please answers these questions
Questions are releated in to XI-BPM
1. Business Process Management is concerned with ?
a. Processes within and across applications
b. Planned or spontaneous Human interaction
c. Automating, streamlining, managing business processes
d. Moving process control from application to technology layer
e. All of the above
2. Which open modeling standard ccBPM adheres to?
a. BPEL
b. XML
c. WSDL
d. None of these
3. High-Tech industry ccBPM implementation guidelines are known as ?
a. RosettaNet Implementation Framework
b. CIDX
c. Marketpalce
d. SAP BC
4. Individual "Swim Lane" in BPM modelling contains ?
a. Business Scenarios from same company
b. Business Scenarios from same Application
5. Different Panes within BPM editor in IR ?
a. Header
b. Editing
c. Process Overview
d. Property
e. Output
f. Object
g. All of the above
6. Data Declaration of the Business process can be viewed in ?
a. Correlation in Object area
b. Container in Output area
c. Container in Object area
d. None of these
7. Which of these is not Messaging relevant Step type ?
a. Receive
b. Send
c. Transformation
d. Receiver Determination
e. Block
8. Control Step can be used for, except ?
a. Terminate current process
b. Trigger an Exception
c. Trigger an Alert
d. Define different processing braches for process
9. Which of the following triggers process to start?
a. By receiving amessage assinged to receive step
b. Batch job by scheduling in WAS
c. Both of these
d. None of these.
10. To route response messages to the
correct process instance, _______ object is used ?
a. Correlation
b. Interface
c. Adapter
d. Mapping
11. Correlation handling is handled by ?
a. BP engine
b. Integration Engine
c. Adapter Engine
d. None of these
12. Container element can be typecasted to, except ?
a. simple XSD/XML Schema
b. Abstract i/f
c. Receiver
d. Multilne(vector)
e. Sender
13. Outer Container block has container element 'O' and inner Container block
has container element 'I'. Then which of the following is true?
a. Both 'O' and 'I' are visible in outer block.
b. Both 'O' and 'I' are visible in inner block.
c. Both of these.
d. None of these.
14. Simple Fork process step terminates when ?
a. All branches are true.
b. All branches are false.
c. Either true.
d. Either false.
15. Collect process pattern types includes ?
a. Condition
b. Receiver message
c. Append message
d. Increase counter
e. Merge message
f. Send message
g. All
XI-Releated questions
1. SAP XI is an Integration technology and platform?
a) for SAP and non SAP applications.
b) for A2A and B2B scenarios
c) for asynchronous and synchronous applications
d) for cross-component Business Process Management.
2. XI represents the following layer in the NetWeaver stack:?
a) People Integration
b) Information Integration
c) Process Integration
3. XI uses the following web standards ?
a) WSDL
b) XSD
c) SOAP
4. XI components include?
a) SLD (System Landscape Directory)
b) Integration Builder
c) Integration Server
d) Central Monitoring
e) Adapter Engine
5. Integration Builder is a?
a) Java application
b) ABAP application
c) .NET application
6. Java Web Start is required for?
a) Caching java clients
b) Drawing pictures
c) Connect to SUN systems
7. SLD is a?
a) Client application
b) Server application
8. XI is technically a client of SLD?
a) TRUE
b) FALSE
9. SLD adheres to?
a) Common Information Model
b) Web Services Definition Language
c) XML Schema Definition Language
d) XML
10. Usage of PCK (Partner Connectivity Kit) ?
a) Allow small partners and subsidiaries to communicate natively with XI
b) For Partners to connect to database systems7444
c) Allow Partners to connect to .NET and Java applications
11. Certain adapters are needed in cases where the Integration Server
is to exchange messages with an R/3 system based on basis kernel lower than?
a) 6.10
b) 6.20
c) 6.40
d) 4.5
12. XI supports the following QoS (Quality of Services)?
a) BE (Best Effort)
b) Exactly Once (EO)
c) Exactly Once In Order (EOIO)
d) Exactly Twice In Order (ETIO)
13. QoS BE is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
14. QoS EO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
15. QoS EOIO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
16. Adapter Framework is based on ?
a) JCA (Java Connector Architecture)
b) NCA (.NET Connector Architecture)
c) PCK (Partner Connectivity Kit)
d) WSDL (Web Services Definition Language)
17. XI Adapter Engine is based on the integrated?
a) ABAP engine
b) J2EE engine
c) .NET engine
d) JCA (Java Connector Architecture)
18. Integration Processes are built using?
a) WSDL (Web Services Definition Language)
b) BPEL (Business Process Execution Language)
c) XSD (XML Schema Definition Language)
d) JCL (Java Connector Language)
19. Runtime Workbench in XI is the central monitoring tool for the following?
a) Component Monitoring
b) Message Monitoring
c) End-to-End Monitoring
d) Performance Monitoring
e) Queue Monitoring
f) Schedule Monitoring
20. XI uses enhanced version of SOAP protocol called?
a) XI XML
b) XI SOAP
c) XI XSD
d) XI PML
21. What is the cardinality of MESSAGE TYPES : DATA TYPES ?
a) 1:1
b) 2:1
c) 2:2
d) 1:0
22. What are the advantages of ASYNCHRONOUS updates?
a) Acknowledgement can be sent back
b) Messages can be persisted.
23. What are the advantages of SYNCHRONOUS updates?
a) Acknowledgement can be sent back (messages can be persisted with additional configuration)
b) Messages can be persisted.
c) Messages cannot be persisted.
24. What is the Message format used in XI for processing?
a) Specific implementation of SOAP which is XI XML
b) JMS
c) RFC
d) CIDX
25. What is an Adapter?
a) Adapters are used to communicate to Legacy or SAP systems with WAS version < 6.2
b) Adapters are used to retrieve information from Java, .NET systems
c) Adapters are used to import IDOC, RFC information.
26. In the Integration Repository, what is the KEY of an
object or how can an object be uniquely identified?
a) SWCV, Namespace, Name
b) Namespace, Name, Description
c) Name, Description, SWCV
d) SWCV, SWCV1, SWCV2
27. How do you classify NAME SPACE in an R/3 Environment?
a) Equivalent to function group
b) Equivalent to development class
c) Equivalent to function module
d) Equivalent to BAPI
28. What is ICM?
a) Internet Console Manager
b) Internet Communication Manager
c) Infrastructure Communication Manager
d) Intranet Communication Manager
29. A Customer has WAS 6.2 and has decided to use XI?
a) He cannot use XI unless WAS 6.2 is upgraded to WAS 6.4
b) Can use XI with some additional patches
c) WAS 6.2 already has XI in it. No need of any additional software
30. What is the name space of an IDOC?
a) urn:sap-com:document:sap:idoc:messages
b) urn:sap-com:document:idoc:sap:messages
c) urn:sap-com:sap.document:idoc:messages
d) urn:sap-com:document:idoc:messages
31. What is the name space of an RFC ?
a) urn:sap-com:document:rfc:sap:functions
b) urn:sap-com:document:bapi:rfc:functions
c) urn:sap-com:document:sap:rfc:functions
d) urn:sap-com:document:remote:rfc:functions
32. What doesnt get transported when the configuration is released?
a) All Objects will get transported
b) Generated proxies and application coding in the application
components does not get transported when the configuration is released.
c) Only application coding will not get transported.
d) Only generated proxies will not get transported.
33. How many Pipelines are there in the integration server?
a) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding, Call Adapter, Request Message Mapping.
b) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding.
c) Message Branch, Request Message Mapping, Outbound Binding,
Call Adapter, Request Message Mapping.
34. What are the possible Trace Levels?
a) 0 No Trace,1 Low Trace Level,2 Medium Trace Level,
3 High Trace Level,4 Expert Trace Level
b) 0 No Trace,1 Low Trace Level,
2 Medium Trace Level,3 High Trace Level
c) 10 Low Trace Level,20 Medium Trace Level,
30 High Trace Level,40 Expert Trace Level
35. Does JMS adapter need additional driver to communicate to database?
a) Yes
b) No
c) JMS adapter is not available in XI
36. What is use of PCK?
a) Partner Connectivity Kit that helps Partner Systems with no ability
to communicate in XML speak to the Business Systems.
b) PCK is used to deploy additional drivers
c) PCK can be used as an alternative to XI
37. What is Context Object? What is its role?
a) Context Objects are pointers to a specific element within the message,
for future reference. Encapsulate the access to data that is contained
in the payload or in the header of the message.
b) Another form of data types
c) Can be used instead of message types
38. What adapters dont need Sender Agreement?
a) HTTP, IDOC.
b) IDOC, RFC
c) IDOC, JMS
d) JDBC, JMS
39. What is the Protocol followed for Mail Adapter?
a) SMTP
b) IMAP
c) POP3
d) POP4
40. Where do you configure an Adapter?
a) Sender Agreement
b) Receiver Determination
c) Business System
d) Communication Channel
41. Can a JDBC adapter query the database table?
If yes, what are different possibilities?
a) Yes. You can configure sender and receiver communication channels.
A special XML format is defined for content coming from the
Integration Engine. This canonical format enables SQL Insert,
Update, Select, Delete or stored procedure statements to be processed.
A message is always processed in exactly one database transaction.
b) JDBC adapter cannot insert records in the database.
c) We should not insert, update records in the database directly.
42. The message monitoring status DLNG means ?
a) DLNG = Delivering.
b) DLNG = Dialing
c) DLNG = Detailing
d) DLNG = Dismantling
43. Where do you perform Content Based Routing?
a) Receiver Determination
b) Receiver Agreement
c) Sender Agreement
d) Communication Channel
44. What are the various supported mapping types?
a) Message Mapping, Java Mapping, XSLT Mapping, ABAP Mapping.
b) XSLT, Java, JDBC, JMS
c) XSLT, WSDL, XSD
45. With respect to ABAP proxies,
what are the methods that can be coded?
a) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCHRONOUS.
b) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCH.
c) EXECUTE_SYNCH, EXECUTE_ASYNCH
46. Fields under a node with a minoccurs of ZERO has been mapped.
The values dont appear in the target result, what could be wrong?
a) The parent node has not been assigned.
b) Parent node has cardinality 0 unbounded
c) Parent node has many fields
47. What is a SENDER COMM CHANNEL?
a) Sender Communication Channel is where you define the source system from
where the message/information goes to XI and also the adapter, the Sender System uses.
b) Sender Communication Channel is where you define the target system from where
the message/information goes out of XI and also the adapter, the Receiver System uses.
c) Sender Communication Channel is where you define the how the
interface mapping takes place between Sender and Receiver.
48. XSLT is supported but two statements were not supported. What are they?
a) <xsd:include>, <xsd:import>
b) <xsd:including>, <xsd:importing>
c) <xsd:includes>, <xsd:imports>
d) All statements are supported.
49. What steps can be inserted in an Exception branch?
a) Terminate a process, trigger an alert.
b) Terminate the interface, trigger IDOC.
c) Terminate exception, branch integration process.
50. What is multi mapping? When can it be used?
a) Multi Mapping is used to map abstract interfaces and can only be used in ccBPM.
b) Can be used when there are multiple interfaces from Sender systems.
c) Can be used when there are multiple interfaces from Receiver systems
51. The first step in the Integration process can be ?
a) Receive step
b) fork Step
c) Send Step
d) Block Step
52. An Exception raised by a step can be handled by ?
a) Only by exception handler in the same step
b) Only by exception handler in the outer step
c) By exception handler in the same step or in the outer step
53. An exception is raised by ?
a) Async or sync send step, transformation step and Control Step
b) Sync send step
c) By control step only
54. A message can be received by ?
a) Only a receive step
b) By receive, fork or loop step
c) By receive and block step
d) By send, block and Fork
55. What are the types of containers ?
a) Abstract
b) Simple & Abstract
c) Simple, Abstract and receiver
56. Which of these are true/false with user defined functions?
a) User defined functions are accessible only in the mapping where they are created
b) User defined functions are visible across namespace
c) User defined functions accessed in other mapping by copying it to that mapping
d) User defined functions are accessible in any mapping in a software component version
57. Java Mapping is executed by implementing the interface ?
a) com.sap.aii.mapping.api.StreamTransformation
b) com.sap.api.mapping.StreamTransformation
c) com.sap.api.mapping.aii.StreamTransformation
d) com.sap.mapping.api.StreamTransformation
58. An Idoc has been sent by a sender system to XI, but the idoc is not
received at the XI system which of these could be true/false ?
a) The destination system from the sender system to XI is not configured correctly.
b) The metadata in XI was copied/generated from the sender Idoc is corrupted
c) The destination system from XI to sender system is not defined correctly
d) Sender channel is not configured
59. While mapping which of these is true ? Can I use different mapping ?
a) You can use only one mapping at a time
b) You can use ABAP & JAVA mapping
c) You can use any mapping in any sequence any number of times
d) Different mapping cant be used together
60. To import the metadata from an R/3 system which of this is true/false ?
a) The import permitted in Software component need to be selected
b) You have to create ALE Name in SLD
c) You need to login to the destination (R/3) with a valid user
d) You need to login to destination(R/3) with a User having administrator rights
61. You are implementing XI for your customer, you have very good experience
working in ABAP. While mapping you want to do it in abap, but the option
available are only Message Mapping Java Mapping What would you do to
add the ABAP Mapping option. Where would you configure it?.
a) In Exchange profile
b) In s/w component
c) In Integration Repository
62. From the WSDL description from application server, you can generate ?
a) Java Proxies only
b) ABAP proxies
c) Java and ABAP proxies.
63. JMS adapter can be used for ?
a. IBM web sphere MQ
b. Sonique
c. Web services
64. Which of the following is true/false about HTTP plain adapters?
a. Sender channel is not required to be configured
b. Receiver channel is not required to be configured
c. Using this system can directly connect to integration server
65. You would install Adapter engine de-centrally ?
a. To install PCK
b. To monitor the messages de-centrally
c. To share load with the central adapter engine and increase performance.
66. To Receive the data using Select with JDBC adapter you would ?
a. You would configure a receiver channel
b. you would configure a sender channel
67. You find that the status in transaction SXI_CACHE is
not equal to 0. Which of the following would you perform?
a. Check the condition of BP in Integration Repository
b. Activate the BP in SXI_CHACHE.
c. Activate the BP in Integration Directory
68. Which are the methods that you need to call compulsorily in java mapping ?
a) execute(), setParameter()
b) Exit() Systemproperties()
c) Execute(), SetProperties()
69. What is the relationship between an integration process and business workflow?
a) The Business Process Engine is the same as the Workflow Engine.
b) The Business Process Engine needs external Workflow Engine
c) Business Process Engine is a new name for Workflow Engine
70. What are the different types that a container element can be based on?
a) Simple XSD types : XSD:DATE, XSD:TIME, XSD: INTEGER, XSD: STRING
b) Abstract Integer
c) Receiver
71. Which of the following is true with regards to Container Elements?
a) Elements of a super container are visible in sub container.
b) Elements of sub container are visible in super container
c) Container cannot have super or sub containers
d) Containers can have multiple elements.
72. Send message within an integration process to 8 receivers
at the same time, how can I do this?
a) Create a FORK statement with 8 branches
b) Create 8 interfaces
c) Create a loop with 8 interfaces
d) Create 8 branches
73. Which of the following Objects can be used in BPM ?
a) Context Object
b) Receiver Determination
c) Message Mapping
d) Interface Mapping
74.Could multiple instances of Integration process run at the same time ?
a) Yes
b) No
75. For ABAP mapping which of the following settings have to be done in Exchange Profile ?
a) Com.sap.aii.repository.mapping.additionaltypes = R3_ABAP | Abap-class; R3_XSLT | XSL
b) Com.sap.aii.repository.mapping.additionaltypes = R3_JAVA | Abap-class; R3_XSLT | XSL
c) Com.sap.aii.repository.mapping.additionaltypes = | Abap-class; R3_XSLT | XSL
76. How does Boolean functions work in message mappings ?
a) Boolean functions accept Boolean inputs and result in Boolean values
b) Boolean functions accept Boolean inputs and result in decimal values
c) Boolean functions accept Boolean inputs and result in alphanumeric values
77. While testing message mapping the source message occurs 3 times
but the target message occurs only once? What can be the reason ?
a) Target cardinality is not defined sufficiently
b) Source cannot repeat
c) Message mapping cannot handle multiple values
78. What JAR file is required to perform Java mapping ?
a) aii_map_api.jar
b) aii_map_api.java
c) aii_map_aii.jar
d) None
79. Collaboration Agreement is made of the following ?
a) Sender Agreement, Receiver Agreement
b) Sender Agreement, Sender Communication Channel
c) Sender Agreement, Receiver Communication Channel
d) Receiver Agreement, Receiver Communication Channel
80.What are the three IDOC related transactions in XI ?
a) IDX9
b) IDX1
c) IDX2
d) IDX5
e) IDX3
81.Is EOIO supported by RFC ?
a) YES
b) NO
82. Java Web Start is used for ?
a) Caching Java applications
b) to write Java code
c) to execute Java mapping
d) to perform JMS connectivity
83. Where do you define Usage Dependency?
a) Integration Repository
b) Integration Directory
c) SLD
d) Enterprise Portal
84. For ABAP mapping which class must be implemented ?
a) IF_MAPPING
b) IF_MAPPING_ABAP
c) MAPPING_ABAP
d) MAPPING_EXECUTE_ABAP
85.Component Monitoring in the RWB is used to display
the monitoring of the following components?
a) Integration Engine
b) Adapter Engine
c) Integration Directory
d) Integration Repository
e) Runtime Workbench
86.Does HTTP adapter support QoS BE?
a) Yes
b) No
87.IDOC adapter supports the following QoSs?
a) EO
b) EOIO
c) BE
d) All the above
88.The Client has decided to user HTTP adapter as Sender.
Which transaction should be used to configure the HTTP adapter?
a) SICF
b) SMICM
c) SM59
d) SE80
89.The following transaction is used to monitor XML messages in XI ?
a) SXMB_MONI
b) SM59
c) SXMB_ADM
d) SICF
90.File adapter has the following QoS?
a) BE
b) EO
c) EOIO
d) BEIO
91.When FILE adapter as Sender, we do not need Sender agreement ?
a) Yes
b) No
92. File Sender communication channel can be used by only one Sender agreement ?
a) True
b) False
93. SOAP adapter uses the following message protocol:?
a) SOAP 1.1
b) SOAP 1.2
c) SOAP 1.9
d) SOAP 1.3
94. Using the following URL we can display the content of CPACache?
a) http://<host>:<J2EEport >/CPACache
b) http://<host>:<J2EEport >/AdapterCache
c) http://<host>:<J2EEport >/CPACatch
d) http://<host>:<J2EEport >/CPACache/index.html
95. The following URL can be used to display the Adapter Status in XI ?
a) http://<host>:<J2EEport >/AdapterFramework
b) http://<host>:<J2EEport >/AdapterFramework/RFC
c) http://<host>:<J2EEport >/AdapterFramework/rep
d) http://<host>:<J2EEport >/AdapterStatus
96. Which security role need to be assigned to access the CPACache ?
a) xi_af_cpa_monitoring
b) xi_af_cache_monitor
c) xi_af_cpa_monitor
97. The following URL can be used to manually refresh the CPACache?
a) http://<host>:<J2EEport >/CPACache/refresh=delta
b) http://<host>:<J2EEport >/CPACache/refresh?mode=full
c) http://<host>:<J2EEport >/CPACache/refresh?mode=all
98. The Objects from repository are accessed from directory using user?
a) XIDIRUSER
b) XISUPER
c) XIAPPLUSER
d) XIADMIN
99. Information about the central and decentral Adapter
Framework installations is maintained in ?
a) SLD
b) CLD
c) IR
d) ID
100. Special drivers required for JDBC, JMS adapters can be deployed using ?
a) SPM (Software Procurement Manager)
b) SDM (Software Deployment Manager)
c) SCM (Software Change Manager)
d) SOM (Software Ownership Manager) -
Getting error while try to send data to matmas05 idoc
hello frnds,
i m working on a scenario in which i m sending data from xml file to matmas05 idoc of R/3. here i have done all the required XI settings. at sender side i have used file adapter and at reciever side IDOC Adapter. while i m executing my schenario at that time i m getting green flag into the sxmb_moni transaction but m not able to see any idoc generated at the receiver R/3.
can anybody tell me that what might be the problem? is it the problem with R/3 receiver or it is the problem with XI configuration itself..
Regards,
Hetalhi,
if the flag is green you can check in SMQ1, SMQ2
for any waiting entries
I hope you've activated the queues in SXMB_ADM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Apple Keyboard in Windows doesn't like External HD
I just bought a new Apple keyboard to use on my native Windows XP Pro machine at work. Note: this is not Windows in Boot Camp; it's a Dell PC. When I have the apple keyboard plugged in to the USB at the same time my external hard drive is connected,
-
Can't access my user profile with the supplied user information from Oracle
I can't access my user account at oracle.com with the supplied user name and password supplied by oracle email. user = [email protected]
-
Is there any way to get more than 50 podcast in feed?
I want to have more than 50 episodes in feed(not in archive). But inspector limits me to 50. Is there any way break through 50?
-
Slow to open Illustrator and Photoshop files from FileServer
I have a client that has 5 or so Mac users who cannot open Illustrator and Photoshop files from our Windows Server 2008 R2 Standard. At first, we thought it might be the size of the files over the network because some files are 2-3GB, but they are ev
-
Has anyone else had issues with Verizon Personal Hotspot disappearing?
My Verizon Personal Hotspot has disappeared for the second time in three weeks. I talked to Verizon and they claim it is an Apple issue. Have anyone else had this problem? If so, how did you fix it? Thanks!