Far.exe is not working with FMS 5.0
When try to change the .asc extension to .ase far.exe has prompt error. same time when run far.exe for server 3.5 on 32 bit machine it works fine.
My observation when i am using For each it fails too for server 3.5 for 32 bit machine.
thanks in advance.
Vishal Sood
aamirik, you've answered your question in your own first post.
You solved your own question. App World is NOT availabe in Pakistan.
RIM has explained in the past that they cannot offer AppWorld in countries where the carriers have not agreed to support AppWorld. Apparently your Pakistani moble providers need to step up to the plate.
So, your problem lies at home.
Good luck.
There are other places you can purchase applications. Try mobihand.com
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Apache not working with FMS 4.5 on Windows 2008
FMS 4.5.1 Windows 2008 SP2 (64bit).
I've searched everywhere for a possible solution to this, so my apologies if this has been asked before and my thanks for any potential help that anyone can offer to help resolve this.
We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).
Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:
http://63.116.232.5/index.html (does not load externally).
http://63.116.232.6/index.html (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):
http://www.librarymedia.net/flash/player.html?source=rtmp://63.116.232.5/vod/mp4:sample1_1 50kbps.f4v
FMS does not stream Quicktime H.264 files even though f4v files work.
New server (does not work): http://www.librarymedia.net/flash/player.html?source=rtmp://63.116.232.5/vod/mp4:Basketbal l.mov
(f4v works): http://www.librarymedia.net/flash/player.html?source=rtmp://63.116.232.5/vod/mp4:sample1_1 50kbps.f4v
Old server (Quicktime/H.264 file works): http://www.librarymedia.net/flash/player.html?source=rtmp://63.116.232.6/vod/mp4:Basketbal l.mov
Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:
Apache's erro_log file:
a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1:
Solutions: http://wiki.apache.org/httpd/CouldNotDetermineServerName
1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address.
In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
This is the format suggested by the article:
127.0.0.1 localhost.localdomain localhost foo.example.com
Running the nbtstat -a 63.116.232.5 command on the machine results in the following:
WIN-8AIHI2J0524<00> UNIQUE Registered
THS-LIBRARY-VOD<00> GROUP Registered
THS-LIBRARY-VOD<1C> GROUP Registered
WIN-8AIHI2J0524<20> UNIQUE Registered
THS-LIBRARY-VOD<1B> UNIQUE Registered
So the FQDN = WIN-8AIHI2J0524.Ths-library-vod.local
I edited the /etc/hosts to the following (with versions using the local host ip 127.0.0.1 and the external ip address, IPv4 is being used):
63.116.232.5 WIN-8AIHI2J0524.Ths-library-vod.local
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
I've also read Adobe's port configuration articles and changed the ports that Apache and FMS use as specified in the conf/fms.ini file, but nothing has worked so far. I restored everything to the original settings until I can find out exactly how to fix this.
Thank you.Ms. Apurva ,
I changed the files back as you suggested (the failure was occuring with the default settings) and our admin assured me yesterday that the ports that I inquired about were open. I'll ask him again.
The telenet command for both ports 80 and 1935 result in Connect failed for me. I'll check Windows Firewall (turned off) and McAfee to see if there is anything there blocking ports.
Confirm that external connections are blocked: 63.116.232.5/index.html (does not open outside of localhost). No problem accessing with our old server (63.116.232.6/index.html).
I ran this command in nmap and here are the results (11 ports closed): nmap 63.116.232.5 -Pn80
Starting Nmap 6.01 ( http://nmap.org ) at 2012-07-06 08:29 Eastern Standard Time
Nmap scan report for 63.116.232.5
Host is up (0.00092s latency). nmap -p 80 says that the host is down (for both ports).
Not shown: 988 filtered ports
PORT STATE SERVICE
1720/tcp open H.323/Q.931
6000/tcp closed X11
6001/tcp closed X11:1
6002/tcp closed X11:2
6003/tcp closed X11:3
6004/tcp closed X11:4
6005/tcp closed X11:5
6006/tcp closed X11:6
6007/tcp closed X11:7
6009/tcp closed X11:9
6025/tcp closed x11
6059/tcp closed X11:59
Nmap done: 1 IP address (1 host up) scanned in 5.72 seconds
Host status: up
open ports: 1
filtered ports:988
Closed ports: 11
ipv4:63.116.232.5
ipv6: not available
MAC: not available.
Master log file:
2012-07-06
09:22:41
6712
(i)2581173
FMS config <NetworkingIPv6 enable=false>
2012-07-06
09:22:41
6712
(i)2581173
FMS running in IPv4 protocol stack mode!
2012-07-06
09:22:41
6712
(i)2581173
Host: WIN-8AIHI2J0524 IPv4: 10.250.10.1
2012-07-06
09:22:41
6712
(i)2571011
Server starting...
2012-07-06
09:22:46
6712
(i)2581413
H:\Program Files\Adobe\Flash Media Server 4.5\Apache2.2\bin\httpd -f ./conf/httpd.conf -d "H:\Program Files\Adobe\Flash Media Server 4.5\Apache2.2" -n FMSHttpd -k start returned 0:
2012-07-06
09:22:46
6712
(i)2581224
Edge (1508) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "H:\Program Files\Adobe\Flash Media Server 4.5\conf\server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
2012-07-06
09:22:46
6712
(i)2571111
Server started (H:\Program Files\Adobe\Flash Media Server 4.5\conf\server.xml).
edge log:
2012-07-06
09:22:46
1508
(i)2581173
FMS detected IPv6 protocol stack!
2012-07-06
09:22:46
1508
(i)2581173
FMS config <NetworkingIPv6 enable=false>
2012-07-06
09:22:46
1508
(i)2581173
FMS running in IPv4 protocol stack mode!
2012-07-06
09:22:46
1508
(i)2581173
Host: WIN-8AIHI2J0524 IPv4: 10.250.10.1
2012-07-06
09:22:47
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4
2012-07-06
09:22:48
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : 1935/v4
2012-07-06
09:22:49
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : 10.250.10.1:19350 (rtmfp-core)/v4
2012-07-06
09:22:49
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : 127.0.0.1:19350 (rtmfp-core)/v4
2012-07-06
09:22:49
1508
(i)2631509
Public rtmfp-core addresses for listener _defaultRoot__edge1 are: 10.250.10.1:19350;127.0.0.1:19350
2012-07-06
09:22:49
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : 10.250.10.1:1935 (rtmfp)/v4
2012-07-06
09:22:49
1508
(i)2631174
Listener started ( _defaultRoot__edge1 ) : 127.0.0.1:1935 (rtmfp)/v4
Not sure what to do.
Thanks. -
Exe file not working with forced download script.
I have a captivate file that I exported as an exe file for
pc. It works fine when I download it from the server using the
direct URL to the file but I don;t want people to actually see
where it is located so I have a used a force-download php script.
When I download it by way of the script... it downloads, but the
file won't play. All I get is a DOS window pop up and then goes
away. Same file...any ideas?
The php file I'm using to force the download is below...
<?php
$filename = $_GET['file'];
// required for IE, otherwise Content-disposition is ignored
if(ini_get('zlib.output_compression'))
ini_set('zlib.output_compression', 'Off');
// addition by Jorg Weske
$file_extension =
strtolower(substr(strrchr($filename,"."),1));
if( $filename == "" )
echo "<html><title>Download
Error</title><body>ERROR: download file NOT SPECIFIED.
USE force-download.php?file=filepath</body></html>";
exit;
} elseif ( ! file_exists( $filename ) )
echo "<html><title>Download
Error</title><body>ERROR: File not found. USE
force-download.php?file=filepath</body></html>";
exit;
switch( $file_extension )
case "pdf": $ctype="application/pdf"; break;
case "exe": $ctype="application/octet-stream"; break;
case "zip": $ctype="application/x-compressed"; break;
case "swf": $ctype="application/x-shockwave-flash"; break;
case "doc": $ctype="application/msword"; break;
case "xls": $ctype="application/vnd.ms-excel"; break;
case "ppt": $ctype="application/vnd.ms-powerpoint"; break;
case "gif": $ctype="image/gif"; break;
case "png": $ctype="image/png"; break;
case "jpeg":
case "jpg": $ctype="image/jpg"; break;
default: $ctype="application/force-download";
header("Pragma: public"); // required
header("Expires: 0");
header("Cache-Control: must-revalidate, post-check=0,
pre-check=0");
header("Cache-Control: private",false); // required for
certain browsers
header("Content-Type: $ctype");
// change, added quotes to allow spaces in filenames, by
Rajkumar Singh
header("Content-Disposition: attachment;
filename=\"".basename($filename)."\";" );
header("Content-Transfer-Encoding: binary");
header("Content-Length: ".filesize($filename));
readfile("$filename");
exit();
?>Actually...never mind. This script creates a HUGE security
risk.... -
ITunes 12.1.1 does NOT work with Windows - Fix??
Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.
-
Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
below is the dev_dsp file details :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2196
Fri Sep 19 21:26:44 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 19 21:26:49 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05EF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E40
DpShMCreate: allocated tm_adm_list at 05EF65C0
DpShMCreate: allocated tm_adm at 05EF65F0
DpShMCreate: allocated wp_ca_adm at 062C5890
DpShMCreate: allocated appc_ca_adm at 062CB650
DpShMCreate: allocated comm_adm at 062CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0634E450
DpShMCreate: allocated gw_adm at 0634E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0634E4C0
DpShMCreate: allocated wall_adm at 0634E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Sep 19 21:26:50 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Sep 19 21:26:52 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2628
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 19 21:26:55 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
Fri Sep 19 21:27:06 2008
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c 11586]
Fri Sep 19 21:27:12 2008
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00 <)
DpStartStopMsg: start msg sent
Fri Sep 19 21:27:20 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Sep 19 21:28:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Sep 19 21:28:33 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Sep 19 21:28:52 2008
ERROR => W0 (pid 2636) died [dpxxdisp.c 14241]
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241]
ERROR => W2 (pid 2652) died [dpxxdisp.c 14241]
ERROR => W3 (pid 1632) died [dpxxdisp.c 14241]
ERROR => W4 (pid 908) died [dpxxdisp.c 14241]
ERROR => W5 (pid 2660) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2668) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2676) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2684) died [dpxxdisp.c 14241]
ERROR => W9 (pid 640) died [dpxxdisp.c 14241]
ERROR => W10 (pid 2692) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2700) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 732) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:02 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Sep 19 15:59:02 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2636 Ended no 1 0 0
1 DIA 2644 Ended no 1 0 0
2 DIA 2652 Ended no 1 0 0
3 DIA 1632 Ended no 1 0 0
4 DIA 908 Ended no 1 0 0
5 DIA 2660 Ended no 1 0 0
6 UPD 2668 Ended no 1 0 0
7 ENQ 2676 Ended no 1 0 0
8 BTC 2684 Ended no 1 0 0
9 BTC 640 Ended no 1 0 0
10 BTC 2692 Ended no 1 0 0
11 SPO 2700 Ended no 1 0 0
12 UP2 732 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 19 15:59:02 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 10
wake_evt_udp_now 0
wake events total 6, udp 2 ( 33%), shm 4 ( 66%)
since last update total 6, udp 2 ( 33%), shm 4 ( 66%)
Dump of tm_adm structure: Fri Sep 19 15:59:02 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 19 15:59:02 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:07 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc6_EC6_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
killing process (2628) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1508 (pos=2)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1508
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1536 (pos=3)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1536
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c 10259]
Good Bye .....The work process are dying
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
This lead the dispatcher to emergency shutdow:
DISPATCHER EMERGENCY SHUTDOWN ***
if the dispatcher cannot start the work process it force the shutdown.So, you need to check
at the work process trace (dev_w*) files to find out the reason the they are dying.
@deeptss
if you are talking about the WARNING
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
this is a normal situation if the reverse name resolution is not working.
I have found this error when the DNS server has without the reverse zone configured.
However this is not a problem to the dispatcher operation.
Cheers
Clebio -
ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA
WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required. -
Flash Player 11.3.300.262 Not working with Firefox. I think I found the problem.
*Flash Player 11.3.300.262 is not working with Firefox. I think I found the problem.*
Millions of people got off work & turned on there computers recently to discover that Firefox is not playing any videos or flash content. Just like me, millions of people are randomly searching the internet in a futile & frustrating attempt at answers. Unfortunately, many of those people will simply stop using firefox & deem it a glitchy, unreliable browser.
This happened to me a couple days ago. I started up my computer & got a pop-up from Adobe saying that I need to update my flash player to 11.3.300.262. I've always thought of adobe as being a reliable software company, so I clicked on it with confidence that things will be working even smoother. To my horror, I relalized that right after the update, my main browser, firefox was destroyed. Then I went on the frustrating process of uninstalling, re-installing, running virus scan, researching the internet like a lost child. I said to myself, "that's why I hate updating stuff, because updates always seem to change stuff you don't want it to change & there always seems to be a problem with the updates." I usualy update software months after it releases, because microsoft & all the other software companies always seem not to test there stuff properly before releasing them. Then we have to look at a glitchy computer until the next update fixes it. Well, that is my rant. Now let me discuss the problem I found.
Problem:
What I did was, go into my firefox extentions menu & I disabled the 11.3.300.262 & I re-enabled the previous flash player. After that, everything worked perfect again. Then a today (a week later), I turned on my computer & my firefox wasn't playing any videos or flash content again. I went into my firefox extenions menu again, & I discovered that my old flash player had been deleted, & this new glitchy 11.3.300.262 had been enabled. Why did adobe feel the need to into my computer & automaticly delete & update my flash player. Now it doesn't work. THIS IS REALY FRUSTRATING!
The Issue I discovered:
"RealPlayer" is the most popular video program & it is installed on millions of computers. For some strange reason Firefox does not want its users to use Real Player. Specifically the RealPlayer Browser Record Plugin 15.0.2. I also discovered that my Browser Record Plugin 15.0.2 was automatically disabled when the Adobe 11.3.300.262 was automatically updated also.
- Maybe this could be because of some copyright conspiracy to keep people from downloading videos from the web.
- Maybe firefox wants people to use there download add-on instead of RealPlayers downloader.
I don't know what ther reason is. But what I do know is Nobody is going to delete there RealPlayer from there computer just to use FireFox. We can simply use Chrome or Internet explorer. I took the advise from Adobe & disabled the FireFox RealPlayer Extention. I also went into my RealPlayer preferences options, But there was no option to disable download recording from FireFox. BECAUSE I ALREADY DISABLED THE ADD-ON in FireFoxes menu.
Solution:
Step 1: Adobe needs to update all the computers with the previous flash player. That way we can choose to enable the previous flash player in our FireFox. or wait until a new update fixes the problem with firefox.
Step 2: Adobe & FireFox need to get together & go back to the drawing board. They need to create a update that actually works on computers that have Real Player installed on them. I don't care which company does the update. All I care about is if it works. Thank You.
Oh yea, Im running FireFox 13.0.1, Windows 7, HP computer, Real Player is up to date.Hey Chris,
I was able to duplicate this issue on my Windows 7 laptop as follows:
1) Completely uninstall FlashPlayer (using your tool) as well as Mozilla Firefox and Mozilla Maintenance Service (used Windows 7 - uninstall from Control Panel). Please note that I checked the box that said "Remove my Firefox personal data and customizations" to ensure that Firefox was completely gone from my laptop.
2) I then went out to the Firefox website and downloaded the "Firefox Setup 13.0.1.exe" app to my laptop. I ran this app to install Firefox.
3) I then went to the following website http://www.ishmael.org.uk/karaoke02.php as I know that this URL uses Flash Player (obviously you can go to any URL that uses Flash Player - I'm just letting you know which one I used). I then clicked on the icon on this page to install Flash Player.
Once the install was completed, the URL stops responding and appears to be locked up (although it will occassionally hiccup and display portions of the page and then lock up again). You will eventually get a pop-up notice from Firefox that has the header "Warning: Unresponsive script" and says the following:
A script on this page may be busy or it may have stopped responding. You can stop the script now, or you can continue to to see of the script will complete. Script: chrome://browser/content/browser.js:6551
Selecting "Stop script" will get Firefox working until you hit another page that uses Flash Player.
To ensure that the above URL is not the culprit, I used one from your website http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html and had the same results.
Hope this info helps!
Jeff
NOTE: As a reminder, I do not have RealPlayer installed on my laptop (and never have had it installed) -
IMessage not working with one single contact
My iPhone has stopped sending iMessages to one singular contact. Before today we have been using iMessage to communicate regularly. This is the only contact that iMessage does to not work with on my phone and on his he can iMessage me but I don't receive these messages. Also in group chats we can no longer communicate due to this issue.
Did anyone fix this problem?
This just happened to me yesterday! I have iOS 7.1, had no issues until yesterday!
I can iMessage my iMessage friends on my iPad with no problem, but the iPhone 5 randomlly decided yesterday that it would only iMessage selective people!
I've tried everthing I can find so far. -
Default Mail app not working with yahoo mail. Won't update.
Default Maill app not working with Yahoo Mail.
It stopped working the other day. I tried everything but it wouldn't update new mail. The yahoo account itself is fine because I can see new mail on Yahoo or a yahoo app.
I tried deleting the account and putting it back on, but now it has 0 mail in any part of it. Nothing has synced.
What do I do?
iPad 2 latest OS.A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all! -
Adobe cs6 apps not working with OS X Yosemite
Illustrator and After Effects are not working with OS 10.10.1 After Effects opens into and is stuck in Render Queue. Illustrator says it need a previous version of java. Im a little nervous about going with a older version of java on my new machine
Ps, Pr and Au seem to be working ok so far.
Any Ideas??
Thanks, MikeI am having the exact same problem with After Effects (13.1.1.3) OSX 10.10.1. Renders lockup in the render queue hanging on frame 2.
Whats the deal Adobe?
If your going to push updates to customers all the time, your software has gotta be solid.
I now have a client project that I can't render and I can't open in previous versions of AE either.
Yours truly,
Screwed. -
Adobe Photoshop CS5 is not working with Lion.
Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?
I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg -
Photoshop CS5 not working with Lucida Grande Regular font
On my iMac Intel Core 2 Duo 2.66 GHz, I am running OS 10.6.7.
When using Photoshop CS5, if I try to use the font, Lucida Grande Regular, it causes an error.
"Could not use the type tool because of a program error."
When I try to open an existing file that has type layers that include the font Lucida Grande Regular, Photoshop will not open the file. I have several of these files that I want to use. I can open them on another Macintosh and everything works fine.
First I get a message window that says, " Some text layers might need to be updated before they can be used for vector based output. Do you want to update these layers now?" I click on update and then get the following message. "Could not complete your request because of a program error."
I have updated Photoshop CS5 to the latest version, 12.0.4.
I have run the FontTest.jsx script and it shows an error for Lucida Grande Regular.
(IOError: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
- <no additional information available>)
The other 100+ fonts on my machine did not create errors.
Since Lucida Grande Regular is an essential font for Mac OS X, I re-installed OS 10.6 in order to have a new version of Lucida Grande Regular. After that re-install I am having the same problems with the font not working in Photoshop.
It also does not work with Adobe InDesign CS5. The font does work in Microsoft Word.
The program Font Book verifies Lucida Grande Regular.
Other fonts including, Lucida Grande Bold, work fine in Photoshop and InDesign.
What can I do to get Photoshop CS5 to work with Lucida Grande Regular?Wow, I'm so glad I found this thread. This problem has been dogging me for years, and it's so sporadic that I've been afraid of breathing the wrong way lest I somehow incur that diabolical Program Error dialog. I'd managed to reach a truce with Photoshop CS5, getting it into a barely working state, and avoiding all updates... until Lion came along today. Then I updated to CS5 12.0.4, and the Program Errors were back again.
Now I see that the problem does seem to be related to the Lucida Grande font. If there's a layer with that font in it, not only can I not edit that text, but I can't marquee select anything, nor drag any shapes. Deleting caches and massaging fonts are completely ineffectual measures... but if I delete the Lucida layers entirely, we're back in business.
At least so far.
Funny to think that of all the innovations I'd like to see Photoshop adopt, the fixing of this one issue is the thing I'd like to see most. I'll be keeping my eye on this thread, and any updates by Mr. Cox. -
Graphite base station not working with my Intel Based Mac Mini and iPhone.
My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: SorianoI suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps. -
Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard
I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue. -
Java 7 Update 11 Not Working with Firefox
For me, the problems described in the thread "Java 7 Update 10 Not Working with Firefox? " Java 7 Update 10 Not Working with Firefox?
are continuing with Java 7 Update 11.
Windows 7 64 bit
Firefox 18
The problem is that "Java(TM) Platform" is missing from the plug-in list.
I've uninstalled Java 7 Update 11 and reinstalled Java Update 9 which correctly installs the plugin and restores Java functionality which was broken immediately upon installing both Java 10 & 11.981243 wrote:
So why not using Ju11 ? You can workaround the issue. It would sucks but still be safer than using Ju9.
Also ask Mozilla forums if Firefox has options where to search for plugins.
Or try 64-bit Firefox.As I explained in both threads ...
Java 7 Update 10 Not Working with Firefox?
Java 7 Update 11 Not Working with Firefox
... neither jre7u10 nor jre7u11 are working ... and they are BOTH broken with the same problem ... "Java(TM) Platform" pliugin is missing from the plug-in list. It cannot be enabled, because it simply is NOT there. A suggestion was made the jre7u12 will be the "fix" for this issue ... so I installed the Update 12 Preview and it sis ALSO broken, no "Java(TM) Platform" in the plug-in list.
The ONLY Java version that actually works for me is jre7u9.
As far as installing Firefox 64bit ... I see no future in installing a browser that has been discontinued.
http://www.computerworld.com/s/article/9233976/Mozilla_suspends_work_on_64_bit_Firefox_for_Windows
Even though Mozilla relented due to backlash, I continued development will be a somewhat low priority.
http://www.computerworld.com/s/article/9234997/Mozilla_compromises_on_x64_Firefox_after_user_backlash
Maybe you are looking for
-
How Many systems like ECC and BI can connect to EP server
Dear experts I want to know ,how many systems can connect to one EP server,like ECC dev,qty and prd ,and BI dev,qty and prd with JCO and SSO connection...can you please clarify Thanks in advance Regards krishna
-
I created a book in iphoto, and in the adding and deleting of pages, somehow the back flap and back cover are now showing as a page layout, and there isn't a back flap/cover anymore, and I can't seem to add it. I have spend hours on this project, is
-
I was sent an MPEG file to edit and used Quicktime to export it as a movie (Integer, Little Endian, H.264) and yet FCP gives me the "File error: 1 file(s) recognized, 0 access denied, 1 unknown." error when I attempt to import it. Any one have any su
-
To the MOD's - What Happened to an Encore Post in CS5?
I went to reply to a post in the CS5 forum, regarding First Play in Encore. My first line was to post (or have it moved) to the Encore Forum, with a link, and then some comments for the OP to consider, and info to provide along the way. When I hit Po
-
How can I transfer photoes from iPhone to iPad, How can I transfer photoes from iPhone to iPad
I want to receive multiple photoes from iPhone to iPad? How it can be done?