FAS Sage to SAP Conversion

Hello Gurus and Gurettes,
I am currently working on a new conversion project. My problem is I have not been able to find much information about the conversion of this specific software( FAS Sage) to SAP.
I was hoping someone has had experience and could help me out by pointing out a few things.
1) Just general things to be aware of with this specific software.
2) Issues you encountered and solutions.
3) How you handled the conversion and the results. After the fact would you have handle it the same way? Eg Did you convert depreciation history or use fair market value?
4) Any other tips, recommendations!
Thanks for any help!
Jack

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f3f4347336fc9e10000000a1553f6/CMSap.pdf
HOpe his helps.
Regards,
Akshay Jamgaonkar.

Similar Messages

Sender Mail Adapter with SAP Conversion agent

have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweig

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

Urgent: IDOC to EDI with SAP Conversion Agent

Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
E

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

SAP Conversion Agent

Hi,
I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
2. It is a must to use the EDI message parsing templates provided in the CA library ?
3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
I have gone throught the help document. Please help me find answers for the above questions.
Thanks,
Hari

Hi SreeHari,
Please refer to the link below,which might help you.
[SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
Regards,
Madhu

SAP Conversion Agent Studio Preview Version

Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
Robert

Hi Conversion Agent experts,
Do you have any ideas?
Thx
manuku

SAP Conversion Agent: HL7 library project could not be executed

Hi experts
I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
"Invalid service 'TEST'. Check service name and service database"
Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
<description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
<time>N/A</time>
</Event>
</Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
Do you have any ideas?
Thx,
manuku

Hi Conversion Agent experts,
Do you have any ideas?
Thx
manuku

SAP Conversion Agent - Performance Tuning

Hi Experts,
We are working with SAP Conversion agent..we have developed several scenarios on that...
But, Now we are worried about the performance issues on the same.
Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
-S

Hi,
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
Conversion Agent
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
Thanks,
Madhu

XI supports EDIFACT without SAP Conversion Agent and others.

Hello.
Somebody knows the best way to convert EDIFACT message using XI?
What I can do this without using softwares of conversion like:
- SAP Conversion Agent;
- Seeburger;
- BIC Mapper and others.
Thanks very much in advance.

Hi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil

How to download to SAP CONVERSION AGENT

Hi,
Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
SAP Software Distribution Center
    Download
        Support Packages and Patches
            Entry by Application Group
SAP NetWeaver ->
is shows as Data unavailable.Request your help on this.
Regards,
Bhargav
Message was edited by:
        bhargav gundabolu

HI Bhargav
Try out this
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
It is working
Thanks
Abhishek Mahajan
***Please reward points if helpful**

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

How to download SAP Conversion Agent 7.1 by Informatica

Hi Gurus,
I tried to download SAP Conversion Agent 7.1 by Informatica from following location
Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
but its showing No data available. Can anybody help me how to get this conversion agent.

Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?

Hi Eperts,
I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
When i'm defining my ANCHORS/MARKERS/CONTENT/ .
getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
Could anyone can guide me pl.
Thanks in Advance..
regards,
vasantj.

Hi vasantj,
Did you manage to resolve this issue?
I face the same problem.
Please ellaorate.
Nimrod.G

Help required regarding Integrating Conversion Agent with SAP-XI

I want to run a simple File to File scenario which involves integrating conversion
agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
I deployed the module and I configured the channel in the same way what was specified in the webblog.
But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
Can u please provide me the solution for correcting the above error, this would be a great help for me..

HI,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
with item fiels.
Regards
Chilla

Interface and conversion testing of SAP environments with Master Data

Hi guy's
Please let me know if some one of you know about SAP Conversion Project. Below you have more description:
- testing of Interfaces from Legacy Systems
- testing of conversion programs used in the conversion or transposition of data from legacy systems
- data cleansing activities associated with conversion
- identify and populate various SAP environments with Master Data necessary for both conversion and interface testing
Any detail info in that and what kind of knowledge you need to have in some of project will be useful.
Thanks in advance
Adeel

Hi Yannick,
I am trying to do the exact same thing. Have you gotten any further on this issue?

How to output PDF file through XI from PDF form generated in SAP

Hi, All,
I need to generate and send out PDF file to other system through XI. The PDF file source come from SAP PDF form which type is XSTRING. I see there is a similar thread posted here /message/527877#527877 [original link is broken]
but it seems does not have good solution there. Can anybody give a hand?
Useful information will be surely awarded.
Yang

Hi,
Please check the links below to know about conversion agent tool,it is a third party tool which helps to convert the PDF,word doc,HL7 doc......etc into xml format.
This s/w u have to buy from SAP and do the convertion in the convertion agent tool and deploy it in the xi server.
Check the links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6d95e0ac846fcbe10000000a1553f6/CMGetStart.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/content.htm
More on the SAP Conversion Agent by Itemfield
Integrate SAP Conversion Agent by Itemfield with SAP XI
Conversion Agent a Free Lunch?
How to get started using Conversion Agent from Itemfield
Conversion Agent - Handling EDI termination characters
https://websmp102.sap-ag.de/~sapdownload/011000358700001090982006E/ConvAgentDocSP16.zip
https://websmp102.sap-ag.de/~sapdownload/011000358700004921152005E/ConversionAgent.pdf
Regards,
Phani

FAS Sage to SAP Conversion

Similar Messages

Maybe you are looking for