Fast Color Corrector Edit Effects to a Video Clip --- need help, please

I am editing a single video clip.  The clip is too dark, even though I used a video light.  Classroom in a Book, page 298 recommends to apply the Fast Color Corrector.  I tried...BUT as book reads, the color corrector wheel should pop up and allows changes to color.????
Please help.  With Thanks.  Please reply with help to me by e-mail...[email protected]
Larry

Hello Mr. Hoecker:
Thanks very much for your reply and advice.  I am enclosing photos to show that:
I can NOT see anything by clicking on the grey triangles.
In “Fast Color Corrector” I do NOT see a section which says…”Input Levels”
Perhaps my install of CS 6 is missing some software.  I will re-install and see until you can reply on this.
This is a page from the single clip I need to lighten so the face and black dive suit shows better.
FYI:  I have been an Adobe subscriber and user since there was Adobe.  I try to use the Classroom in a book for CS 5 and CS 6.  When stumped, I go into the book and try to find a fix. In this situation, the little triangles, etc. are NOT there where I can see them.  And…YES there is a LOT that I do not know.
Many thanks.
Larry McKenna

Similar Messages

  • Ever since I updating Safari to 7.0.3 I cannot open any youtube videos. Need help please

    Ever since I updating Safari to 7.0.3 I cannot open any youtube videos. Need help please

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.  Click Safari in the menu bar and then Quit Safari .
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.
        Adobe Flash Player
        Currently open website:
        All other websites"
        Select "Allow" then "Done".
    3. Delete cookies.
         Safari > Preferences > Privacy > Cookies and other website data:
         Press the “Remove All Website Data” button.  It may take a while.
    4. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • Nokia n96 video problems.Need help please

    how do i go about putting videos on through pc suite but everytime i try, it starts converting and stops quatre way there.
    i tryed using another media converter all together now don't know what format or resolution the videos have to be converted to in order to work on my phone. the videos i have been trying to convert are .avi format.
    does anyone have any advice that can help me?

    PC suite is the wrong tool for this job as it's not very good at handling large files.
    A great source of information on how to make videos compatible with the N96 is available on this blog:
    http://portablevideo.blogspot.com/
    Look through the archives on there and you will find a very good guide on what programs to use and the required settings.
    If your avi files are divx or xvid you may want to install the programs below to see if you can play them without conversion. The program on the first link is free, the second is not but a demo may be available.
    http://labs.divx.com/system/files/private/DivXPlayer_S60_3rd_0.sisx
    www.lonelycatgames.com/?app=smartmovie
    Message Edited by psychomania on 20-Jan-2009 09:02 AM

  • When I change my TIFFs to jpegs, the color and tone are changing as well [was: Need help please!]

    When I change my TIFFs to jpegs, the color and tone are changing as well, any ideas as to what the problem could be?

    You are screwing up the colors by not using color management or at least not keeping an eye what color space/ profiel your source files use anbd what happens when Safe for Web converts them. As a start, perhaps refer to this, then work your way through the Internet wide and far to learn about color management:
    Common Photoshop Issues
    Mylenium

  • Fast Color Corrector not rendering in final output

    I have a stack of effects setup in order to create a wipe-on glow effect.  I'm using Fast Color Corrector, Gausian Blur and Crop.  When I playback the project in Premiere Pro CC, it plays back correctly (at least, the way I'd like it to look).  However, Adobe Media Encoder is not encoding the Fast Color Corrector, which effectively makes my wipe-on look lame.  Both Gaussian Blur and Crop seem to be working, here is the correct (Premiere) and incorrect (AME) screenshot.  Notice the "OD" in the word "Good".
    All effects and all video tracks are enabled.  Anyone know anything about this and how I might force AME to take notice and render all of the effects?
    By the way, I just tried "Export" instead of using Adobe Media Encoder.  It works.  Why doesn't it render correctly in AME?

    My best guess is that AME isn't using GPU acceleration, which means things get rendered differently.
    Either go Direct, or check Maximum Render Quality.

  • Premiere Pro Freezes mac while rendering Fast Color Corrector & Rgb curves

    I am having a problem that is impacting our business. We are doing commercials that we are doing color correction of the subject using Fast Color Corrector and RGB curves. When these effects are added to the sequenced video, the performance of the Mac Pro slows down considerably.
    Then when we go to render the project so that we can see the effects in real time, the computer freezes completely. The program usually informs us that it must close due to a serious error. I have attempted to restart the computer, clean up permissions etc to solve this problem but to no avail. Why would this happen? Any ideas on how to solve it?
    Here are the specs:
    Using Premiere Pro CC 7.2.1 (4)
    Mac Pro: 3.2 Ghz Quad-Core Intel Xeon
    Memory: 24 GB
    ATI Radeon HD 5770 (1024 MB)
    OS: 10.8.5

    Yes. I experimented on my own and got confirms from a couple of sources. Where the problem was is bad suggestions about what settings to use in Premiere Pro.
    The first setting you want to check (although Premiere Pro will probably see the card right away is:
    File > Project Settings > General - Make sure that Mercury Playback Engine GPU Acceleration is selected. Everyone agrees on this.
    Now is where the fun begins. There is a school of thought that says to go here:
    Sequence > Sequence Setttings - Under Video Previews, they want you to check off Maximum Render Quality. Once you do this, you must also go to:
    Preferences > Memory - and change Optimize Rendering for Performance
    DO NOT DO THIS! What I found is that this significantly slows down your system and makes rendering and exporting take over your computer (and I have a lot of ram). Leave your change with the setting Mercury Playback Engine GPU Acceleration and you should be great.
    I have found a significant change in running color correction effects, exporting and rendering. You will too.
    Let me know how you make out after your setup.
    Have a great day!

  • Color Corrector edits have stopped functioning

    I use Premiere Pro CS4.  I have a project with about 100 clips in which I used some Fast Color Corrector presets I had made to correct the color.  (There is color correction in every clip so it was a lot of work.)  This evening I noticed that all of the color corrections I made are no longer working, except for the last few I had done.  The Fast Color Correction effects are still being shown in the Effects Control window, and each one still has all of the settings adjustments I had made, but they are no longer affecting the video.
    So I have these questions:
    Why are the changes I had made with my Fast Color Corrector presets no longer affecting the video?
    Can I correct the problem so that all of my color correction work is restored?

    This turned out to be a problem with my monitor, not with Premiere Pro CS4.  My apologies.

  • Why does Fast Color Corrector have a Mask Output option?

    Fast Color Corrector has a Mask Output option. In other effects the Mask Output option is used to see the mask created with the Secondary Color Correction feature within the effects. Fast Color Corrector does not have a Secondary Color Correction option.

    Well...we digress.
    The Three-way Color Corrector Master wheel does not work the same way as the Fast Color Corrector color wheel. I think the Three-way Color Corrector Master control, overall, doesn't work properly. Try the following:
    1) In the Three-way Color Corrector, select the Master Tonal Range and reduce Saturation to 0. There is still plenty of color information present.
    2) With the Master Tonal Range selected, drag the Master Balance Magnitude to 100 degrees (keeping the Master Balance Gain at its default 20). Do the same with the Fast Color Corrector (using the same Balance Angle) and note how differently they behave. The Fast Color Corrector changes hue over all luminance levels. The Three-way Color Corrector Master control adjusts hue over what appears to be a sub-set of full luminance.
    One other color wheel characteristic that I find confounding:
    In most color wheels, 0 degrees is Red, 120 is Green, and 240 is blue. The numeric values increase counter-clockwise. OK, that is the norm. So why is it that with P Pro color wheels, Red is -110 degrees, Green is 130, and blue is 10? Or...looking at compass points: on the P Pro Color wheel, North is -90 degrees, East is minus or plus 0 degrees, South is 90, West is minus or plus 180?
    Jeff

  • I have iMovie HD 2004 and when i try to apply effects to my video clip, the clip turns red. WHY? HEEELLLPPP!

    I am trying to compile a cute little movie for my boyfriend and everything was going fine until I applied an effect to one of my video clips. I tried to apply the "vintage film" effect and the video clip turned red. I undid that effect and tried 3 other effect and the same thing happened. Red clips... :/ whhhyyy? someone help me? I'm poor and I haven't been able to upgrade my very old iBook (2004), so i have the old version of iMovie HD...Can somebody help me? pleeeeeease?

    diegogo
    Irregardless of the Premiere Elements version...
    I do not believe you are doing anything wrong. I have not found it possible to copy a Timeline clip to which Time Remapping has been applied and use Paste Effects and Adjustments to other selected clips on the Timeline to achieve the same fast or slow motion for more than one clip at a time. For one thing the duration of the Time Remapped clip is different than those that have not gone through Time Remapping.
    And, you cannot select more than 1 clip at a time to be taken into the Time Remapping workspace.
    Also, special considerations need to exist for Pan and Zoom Tool for its pan and zoom effect applied to more than one photo at a time.
    ATR Premiere Elements Troubleshooting: PE11: Pan & Zoom Tool, More Than One Photo at a Time
    I will think about this some more. But, at this moment, it appear to be it is what it is.
    ATR

  • Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Yes.
    iMovie 11 tutorials:
    http://help.apple.com/imovie/
    http://www.apple.com/ilife/tutorials/#imovie
    and also these:
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

  • HT201302 Hello,I have downloaded photos from my ipod touch following the instructions but it doesn't download videos.Can you help please?

    Hello,I have downloaded photos from my ipod touch following the instructions but it doesn't download videos.Can you help please?

    doesn't download videos
    I seen so many of these post for windows users.
    Try my little "trick" (must be running iOS 4.3 or better)
    Download the app "Download Manager Lite" (FREE) or "Download Manager" Full ($ 1.99 USD)
    After downloading, transfer it to iTunes
      iTunes Store: Transferring purchases from your iOS device or iPod to a computer 
    After transferring, Go to your iDevice (on itunes), to the apps page, scroll down, you can add/save videos and/or files. 
    Click on "Add", find the folder of which your movies are being downloaded. Its much faster than syncing from itunes.
    You can do the wi-fi transfer, the best part is that you don't have to be connected to the same wi-fi.
    You will get 2 different URLs you need to type on your computer. Type the Web URL not the ftp URL. After that, you should have access to the app, without the need of itunes. 
    Click on Add, find the folder of where your movies are stored, faster than syncing with iTunes.
    HOPE THIS HELPS.

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • I can see and download pdfs in Mail, but I can't even see editable pdfs in Mail.  can anyone help please?  Thx.

    I can see and download pdfs in Mail, but I can't even see editable pdfs in Mail.  Can anyone help please?  Thx.

    Thx Eric.  You've helped!  When I tried to copy the words written in my e-mail to show you what I meant, I right clicked to copy, and saw an option to open the attachment, which it did!  So I'm sorted thank you.  Editable means a form which you can fill in and send back.  Thanks again.  Stephen

  • Use "edit In" to take video clip to premier pro or premier elements like sending pic to photoshop

    I'd like to be able to highlight a video clip and take to "edit In" for either premier pro or premier elements in the dame manner of taking a pic to photoshop or photo elements

    I'd like to be able to highlight a video clip and take to "edit In" for either premier pro or premier elements in the dame manner of taking a pic to photoshop or photo elements

  • Just bought an ipad mini I have synced it with my itunes but when I go to play my music it just flashes threw all the songs or albums or artists like it is on super fast shuffle until it finds a song it would like to play.  need help please

    Just bought an ipad mini I have synced it with my itunes but when I go to play my music it just flashes threw all the songs or albums or artists like it is on super fast shuffle until it finds a song it would like to play.  need help please

    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download an iPad User Guide to the iPad from the iTunes store.
     Cheers, Tom

Maybe you are looking for