Fast dial will not run need to get back to 6 of will try IE 9

fox 7 will not run with fast dial need to roll back to 6 of will install IE9 7

see https://support.mozilla.com/questions/885622

Similar Messages

  • I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    Make sure you enter your new Id in settings/message, settings/facetime.  ANy content that you downloaded with the old ID is forever linked to that old ID and if you have apps that were downloaded with the old ID and you want to update them you can only do that with the old ID.  You could delete those apps and downlad them again ( and pay for them if they are not free apps)

  • TS3212 the new download of itunes will not run. I get a message during the process that I need to verify that I have sufficient privilege. then I get an error 126 and a missing file MSVCR80.dll. what can I do?

    I'm trying to download the new version of itunes. durig the install i get a message that I need to verify that I have sufficient privilege. Then I get a message of a Windows error 126 and a missing file MSVCR 80.dll. I've tried everything on the support site and nothing works.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Firefox will not open, I am getting a crash message when I try to open through Run on windows start up menu, then it will not transmit the error to firefox

    When I go through the Run option on Start, it just says Firefox has had a problem and has crashed, we will try to restore your tabs and windows when it restarts. I click on "restart firefox" and then it opens up another window with the exact same message. Also, I cannot remove firefox through the add/remove programs option on windows. I click on remove and nothing happens.

    You can try reinstalling Firefox. You can get the latest version for free, as always, at [http://getfirefox.com getfirefox.com]. Just install it over your current install. No data will be lost.
    If that doesn't help, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • I uninstalled previous versions of LR and installed the 2015 ver and it will not run. I get an error message; the procedure entry point .............

    I am unable to get LR6 to run. When I try to open the program it gives me an error message "

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • PSE 5 will not run in Windows 7?

    Hi,
    I recently upgraded from Windows Vista 32 bit to Windows 7 64 bit - I reinstalled PSE 5 but now it will not run.
    I get the following errors:
    - Could not load the FastCore Routines module because the file could not be found.
    - Could not load the MMXCore Routines module because the file could not be found.
    - Could not load the Multiprocessor Support module because the file could not be found.
    - Could not initialize Photoshop Elements because the file could not be found.
    - The action you have requested could not be completed because the application is not responding. It may still be loading or waiting for a response from you.
    I searched for the errors on the forums and found the common responses that the 5.0.2 update needed to be installed. I installed the update but it hasn't fixed the problem.
    I also saw that many people had managed to run it using compatibility mode - I have tried running it in Windows Vista/SP1/SP2, Windows XP etc but nothing likes it.
    Can anybody please help? I had absolutely no problems with this software before and I'm half tempted to buy PSE 10 (which I can't afford to do) just to save me the hassle.
    Thanks in advance.

    Hi Laura,
    Since you've uninstalled and re-installed PSE5, we have to assume that those files are in the correct location.  If someone here has PSE5 installed, it would be nice if they can confirm that.
    The next thing to try is disabling Data Execution Prevention (DEP) for the editor:
    Use Start...Control Panel...System.
    On the left, select "System Protection".
    Select the "Advanced" tab.
    Click the "Settings" button in the "Performance" section.
    Click on the "Data Execution Prevention" tab.
    Use the bottom radio button ("Turn on DEP...except those I select").
    Click the "Add" button, then browse to the
    "C:\Program Files (x86)\Adobe\Photoshop Elements 5\PhotoshopElementsEditor.exe"
    file.
    Make sure that the editor's file has a check in its box, and do "OK" to back out of all the dialog boxes.
    Reboot.
    Ken

  • Why does LabVIEW Application Builder 8.0.1 create an executable that will not run?

    My VI runs perfectly.  But when I generate the executable, it will not run.  I get a "File Not Found" error.  The file it can't find is "File Open+.VI" from vi.lib.  I've tried copying File Open+.vi into my project.  If still generates the same error.
    Attachments:
    OTS.zip ‏3105 KB

    There error is coming out of FlowCal Server.  You use the current VI path to build up the file paths.  That works great in development but when you compile a VI into an exe, an extra layer is added.  See this KB http://digital.ni.com/public.nsf/websearch/FD7DE8BC8FFC256C862565F4006BE363?OpenDocument
    So when its an exe you need to strip the path one more time.

  • Published report will not run; works fine in VS2010 debug mode.

    Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
    The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
    Error
    Database logon failed.
    or
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
    Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

    See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
    I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
    - Ludek

  • InDesign CS4 will not run under Lion

    I have InDesign CS4 and Design Suite CS3. All my other CS3 apps run under Lion. The Upgrade to Lion failed leaving my internal unbootable, so I installed and migrated to an external drive. But after the upgrade to Lion all of the other CS 3 aps run, IDCS4 will not run. I get the following message:
    Adobe InDesign is missing required system fonts or CMap files. Please reinstall InDesign.
    I used the uninstaller and reinstalled. No affect. I made the Library folder visible. No effect. I cant

    There is a very long list of incompatibilities with Lion:
    http://kb2.adobe.com/cps/905/cpsid_90508.html
    I'm sure there are many more that are unknown.
    FWIW, I highly recommend sticking with Snow Leopard for now and when you do upgrade, do so as a clean install.
    John will be along soon to tell you to ignore the man behind the curtain.
    Bob

  • I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

    I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
    "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
    I completed the trial questionnaire & all seemed well. Can anyone help?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Photoshop will not run after creative cloud installation

    Photoshop will not run. I get the following errors: "Could ot open a scratch file because of a disk error" and "Could not initalize photoshop because the preferences file was invalid.  it has been deleted"
    Thanks
    Wray Herring

    You have permissions problems on your installation drive. Hold down Ctrl+Alt+Shift while the program starts to reset prefs and configure your scratch drive. And verify your user privileges and file permissions....
    Mylenium

  • Lightroom 5.7.1 64-bit will not run will not uninstall.

    Suddenly Lightroom 5.7.1 will not run. I get:
    Followed by:
    However, trying to uninstall just gives:
    ... and it never uninstalls.
    I'm getting very frustrated with this. Any ideas?

    Have you successfully Signed Out and back in to CC (or do you still have an error message on CC)?
    Sign out, Sign in | Creative Cloud Desktop app
    If not and you can't I'd guess it's still the CC that is the problem.  There have been similar issues preventing LR starting here on the forum in the past (do a search, it might help)
    After that I'd try the Technical Chat if you can't find anything on the CC forum (IMHO the forums are more likely to be able to help but it might take time).
    Contact Customer Care

  • Itunes 6 will not run, Quick time 7 is working

    I have searched and tired everything, but my itunes 6 will not start. I have uninstalled and reinstalled both itunes and quick time. I have also downloaded the start alone quick time. Nothing is working. How can I make my itunes start??? help me please!

    hi Texas!
    but my itunes 6 will not start.
    are you getting an error message when you try to launch itunes? if so, what does it say?
    if you're getting no error message whatsoever when you try to launch itunes (it just sits there doing nothing), please make the following observations for us.
    reboot the PC. open your Task Manager to the Processes Tab. now try to launch itunes.
    does an itunes.exe process appear? if so, does it persist in Task Manager or disappear after a few seconds?
    love, b

Maybe you are looking for