Fast Export from FCP X to Compressor?

I've switched from FCP 7 to FCP X and one feature which frustrates me is that the export is so slow. In FCP7 I could export a sequence as a QuickTime reference file, and (provided there was no rendering do to) it was finished in seconds. Under FCPX we can no longer export as a QT reference, so there's around 40 minutes to wait - not for any rendering or heavy CPU work, but just while FCP writes an enormous file to my hard drive.
And this is 40 minutes when I can't do any useful work with FCPX.
Would buying Compressor save me this time? If I export from FCPX via Compressor, will it export any faster? I'm hoping that FCP will shift all the work straight to Compressor, and let Compressor do the 40 minutes writing, while FCP is left available for me to do useful work.
Thanks in advance for any help on this one.
MST

Note Tom Wolsky's answer to a similar question here.
Russ

Similar Messages

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • XL-H1 aspect ratio error when exporting from FCP 1080p24 to compressor

    PLEASE HELP
    I have a finished project in fcp in a 1080p24 project.
    My source footage is 1440 x 1080i 24f from an xl-h1.
    When i export from final cut pro to compressor, compressor squeezes my footage into a square.
    if i export to dvd from compressor the ratio is fine.
    when i export in quicktime thats where the skewed image happens.
    Please help
    thanks

    Hi StingoArmy,
    There is an easy fix for this. Once you export your file to Compressor, you can apply an export option, let's say we're going to export a LAN Streaming Quicktime movie for Internet. Now click on the new bar that's been placed inside your media tab. The settings for this export item appear below in the Inspector. Just below the DESCRIPTION line are a series of options buttons. Clicking the option 2nd from the right (Geometry) opens up a new tab where you can change the dimensions. There are several ways to go about exporting to 16:9, the one I use is to change the Frame Size to "Custom (16:9)", however, you can also do the same thing by changing the Pixel Aspect to "HDV 1080i (16:9)" You should test results for both and see which is the preferred method for your final output, depending on what type of Quicktime movie you are creating.

  • QuickTime error when exporting from FCP 4.5 - Compressor

    I'm still on Final Cut Pro 4.5, waiting to get money for a hardware upgrade before I can move to FCP 6, etc.
    I have upgraded to QuickTime Pro 7.2.
    This setup worked fine until today.
    I selected a sequence in FCP and tried to Export to Compressor (the source material was NTSC MiniDV video footage in FCP) using an MPEG-4 Fast Cable Streaming 320x240 export setting. I used this setting successfully to export a very similar project only last week. This evening when I tried exporting via Compressor the attempt failed, and Batch Monitor's log noted a "QuickTime Error -50". I tried this repeatedly this evening, and it produced the same results even after restarting the machine.
    I'm baffled by this. I had no such problem last week.
    Any clues?

    there's also reports of incompatibility with compressor3:
    http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • What should I use to export from FCP to DVDSP?

    I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

    Hi Ryan,
    I'm relatively new to this too but you're on the right track. I would export to Compressor.
    There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
    You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
    You should end up with a file that resembles *My Movie.m2v*
    Then import that file into DVDSP into the assets pane and you're away.
    Good luck!
    -Chuck

  • Best way/settings to export from FCP to DVDSP

    Hey - I have a program I need to export from FCP to DVDSP.
    It is approx. 1hr 15min long.
    What would be the best settings to use to maximize quality?
    I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor???
    This is a very important showreel and quality is a major factor...
    I am using: FCP 5.1.4 DVDSP 4.1.2 Compressor 2.3
    Thanks for all your help in advance!
    PowerPC G5   Mac OS X (10.4.9)  

    Hi:
    << What would be the best settings to use to maximize quality?>>
    You didn't mention your movie codec. Assuming you are using DV, if your FCP projects has graphic elements and heavy filters like Color Corrections, etc. you must get the best quality exporting directly from FCP through Compressor.
    If your movie is basiclally DV video with no graphics, you probably will get same quality and shorter encoding times exporting as QuickTime movie, self settings (self contained is my favorite flavor!) and using this file in Compressor.
    In Compressor use the DVD: Best Quality 90 min preset as starting point taking the MPEG2 and the Dolby 2 (AC3) presets. You most probably will get the best audio level changing the followings parameters in the standard AC3 preset:
    - Dialog Normalization: -31
    - Compression preset: None
    Using uncompressed (AIFF/PCM) audio in DVD-Rs is a major cause of playback problems and/or building errors because the high bitrate, and takes a lot of your disc space.
    If you encode inside DVDSP (using the Quicktime movie file directly in DVDSP) you'll get AIFF audio. DVDSP doesn't encode your audio to AC3.
    <<This is a very important showreel and quality is a major factor...>>
    To save encoding testing times, take a short part/s of your movie and make some encoding test. Select some parts of your footage with fast movements in the image and/or heavy transitions to check the final result.
    <<I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor??? >>
    Allways create your chapter markers in FCP or Compressor. That way you can set the exact frame where to locate it and DVDSP will preserve that position. If you add a Chapter Marker in DVDSP it will be moved to the nearest GOP boundary, not in the exact frame you decided. Check this tutorial about Chapters and Compression Markers .
    Don't forget to post your FCP movie codec/settings.
    <<StirFry..>>
    I think that a bitrate of 7.9 Mbps with uncompressed audio (DVDSP doesn't encode audio to Dolby 2) is too high and can cause some encoding/playback errors in some DVD players. Someone else can post his mind about this ! ;D
    Hope that helps !
      Alberto

  • Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
    Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Exporting from FCP to DVD

    Hey
    Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
    My project is no longer than 5 mins
    1920 x 1080 - 1080i (16:9)
    Field Dominance: None
    frame rate 25
    I have Final Cut Studio latest version.
    I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
    Any advise on what you think will be best would be great.
    Thanks

    Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
    In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
    In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
    Message was edited by: Dynamicworm
    Message was edited by: Dynamicworm

  • PAL files exported from FCP don't display

    This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
    Any ideas? This seems to be a new one.

    Does the computer your using to view this video have Final Cut Pro installed?

  • Exporting from FCP to .mov - backwards compatibility

    Am working from NJ with a client in CA. She is struggling to export her FCP movies into a .mov format that will play on quicktime (specifically on OLDER versions of quicktime). I've been able to assist her in exporting to the .mov format, but it only plays in the quicktime 7 player. Most of her customers do not have that installed and thus cannot view the movie (and, they do not want to take the time to install).
    I would like to be able to walk her through the steps/settings/parameters necessary for her to export into a .mov format which will play in older quicktime players (without forcing the user to update their player).
    example of .mov: http://advertisingusa.tv/0_home/index.shtml
    many thanks in advance,
    windandkitesurfer

    Trying to export from FCP to backwards compatible .mov or .mo4 format.
    We're trying to use Sorenson 3 compression, and are able to create this but the file is created without any extension.
    We are using FCP, export using quicktime conversions, then under options->settings->compressor type = "Sorrenson Video 3"
    Still are not able to create a movie file backwards compatible. Any further assistance greatly appreciated.
    Note the time lapse between emails due to the problem of communicating coast to coast - the web developer is not the first in line for return emails
    regards
      Mac OS X (10.4.8)  

  • Newbie question: How to share large QT movie files exported from FCP X?

    Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
    - Apple ProRes 422
    - 1920 x 1080
    - 24-bit
    - Frame rate 29.97 fps
    Now I need to share these files with the band members. They will use them for two purposes:
    - Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
    - Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
    These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
    The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
    I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
    What are my options for sharing the files?
    Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
    I would assume this is a common problem that all FCP X users deal with.

    I strongly recommend you to use Compressor. It is easy to use and there a lot  of presets.

  • Need quick solution! QT Movie export from FCP not right, client breathing down neck...

    I am working on a project in FCP 6.0.6. The footage is ProRes, 1920 X 1080, and runs about 50 minutes. Some graphics but minimal. Plays back great in timeline. I export a QuickTime Movie (reference movie) but when I play it in Compressor, the video suddenly jumps ahead about five seconds at the 36:00 mark. The audio continues as normal, but now, of course, audio and video are five seconds out of synch. Made multiple attempts to export from FCP, but I keep getting the same result.
    I have a feeling this may be a QuickTime compatability issue, but I can't compress for Web or DVD until I figure this out. Not finding anything in discussions at Apple or Web.
    Other pertinents:
    24-inch iMac, 2.4 GHZ
    4 GB RAM
    OS 10.7.5
    Assistance appreciated.

    Thanks for your comment, Michael, but I actually solved the issue last night. Shane had asked earlier about whether I had any H.264 clips, and I did not. But last night I remembered that when I first created the sequence, I had dragged in an H.264 clip before I converted them all to ProRes. So I realized that although my clips were all ProRes, the sequence itself might still be set for H.264. Checked settings, and sure enough, compression was on H.264. Changed it to ProRes, re-rendered, and I'm rolling again. Thanks, Shane, for planting the seed on that one.

  • Can't open quicktime movie that I exported from FCP 5. Help!

    Can't open quicktime movie that I exported from FCP 5. Help!

    What arrow?
    Have you tried opening the file in FCP?
    If there is no error message and it will not play in QT7, it is quite possible the file is corrupted. You will need to go back to the original project and re-export the file.
    x

Maybe you are looking for