FAST Search - Unable to Complete Query on BackEnd resource limit remporarily exceeded code:1013

Hi ,
We are using FAST search in our SharePoint 2010 environment. I am encountering an issue while navigating to 21st  page or Query string value 200 and above (
URL -> /Pages/results.aspx?k=1&s=All&start1=201
) in search core result web part. The error message is UI is "
The search request was unable to execute on FAST Search Server".
I have found the below log in the ULS .
SearchServiceApplication::Execute--Exception: Microsoft.Office.Server.Search.Query.FASTSearchQueryException: Unable to complete query on backend Resource limit temporarily
exceeded Code: 1013
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.GetQueryResult(IQuery query)
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.ExecuteSearch(SearchRequest request, String queryString)
at Microsoft.Office.Server.Search.Query.Gateway.AbstractSearchGateway.Search(SearchRequest request)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.ExecuteSearch(SearchRequest request, ResultTableCollection rtc)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.Execute(QueryProperties properties)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Execute(QueryProperties properties)
Please share your thoughts or advise if some has come across this issue. Thanks!

Similar Messages

Unable to complete this for Eprint and finding a claim code

I bought a hp envy 4502 all in one printer, it says i need a claim code to add a device, however i have looked at all the information printed all the reports and i am not receiving a claim code at all. no email address for it or nothing. i do not even have an eprint option on the printer, all the wireless is set up and that works fine but no eprint option i printed the status report, the test results page, and the configuration page and these are the only options for any kind of reports to be print please help me
This question was solved.
View Solution.

Hi,
Please try:
On the printer control panel, touch ePrint ().
If Web Services is enabled, touch Settings. If the ePrint service and Web Services options read On, touch Print Report or press OK next to Print Info. An information sheet prints that has your claim code.
If Web Services is not enabled, touch Accept or press the button next to Yes to accept the terms of service. Touch Yes again to enable Web Services and allow your printer to check for updates automatically. Touch ePrint, and then touch On. An information sheet prints that has your claim code.
Source: http://support.hp.com/us-en/document/c03550536
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"The FAST Search backend reported warnings when processing the item." for XLSX

Hi,
i am running an FAST for Sharepoint 2010 for development purpose. I can index DOCX files successfully, but for XLSX files i get the following error:
"The FAST Search backend reported warnings when processing the item. ( Document conversion failed: LoadIFilter() failed: No IFilter registered for the extension '.xlsx' (0x80004005)"
What is wrong here?
Best regards,
Yavuz B.
My Sharepoint and Enterprise 2.0 Blog http://www.bogazci.com |
Microsoft Sharepoint Resources & Blog List

Check if Microsoft Filter Pack 2.0 and the latest Service Pack for Filter Pack is installed.
Sometimes it´s not installed with the Prerequisities.
Tomas Andersson

SharePoint Foundation 2010: search error: "Your search cannot be completed because of a service error."

Hi,
I have SharePoint Foundation 2010 running on a single server with databases, with a second server in the farm serving as a 2nd app tier. Both server have the exact same versions of SharePoint loaded (according to the Central Admin site).
Whenever I try to run a search from any site in my SharePoint Foundation 2010 installation (in this example I typed "this is my query"), it hangs for 20-30 seconds while the IE status bar says:
Waiting for http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2Ftfs2010db%2Ftfs%2FSITE1
Then it finally returns a results screen with an error that says: "Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information."
Checking the SharePoint logs under C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS, the relevant entries say the following (items I deem important
bolded):
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (HEAD:http://172.22.100.101:80/)) 11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Logging
Correlation Data xmnv Medium Name=Request (HEAD:http://172.22.100.101:80/) a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (HEAD:http://172.22.100.101:80/)). Execution Time=3.33645756653429 a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=4.3055751499143 fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.75 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/tfs/SITE1 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.77 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Query dn6r High FetchDataFromURL start at(outside if): 1 param: start 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.79 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search QueryComponentSelection aee7 Medium
Did You Mean Suggester not found. [smart2.hxx:382] d:\office\source\otools\inc\search\common\ytrip\tripoli\smart2.hxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.91 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search Query Processor e0pg Medium 1dd958fb-b605-4b3b-a676-28a3cafb2eb6:
Query completed 125 ms, detailed time: Query stage execution ms times: 0 125 0 0 125 0 0 0 Query stage cpu ms times: 0 31 0 0 31 0 0 0 Query stage hit counts: 1 1 1 7 1 0 1 1 Cursor count: 260 Mapped page count: 164 Total index count: 7 [srequest.cxx:5526]
d:\office\source\search\native\ytrip\tripoli\cifrmwrk\srequest.cxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Exceptions 1hjo
Medium Exception thrown: 0x80040e31 (d:\office\source\otools\inc\search\common\ytrip\tripoli\timeout.hxx:51 ip 0x000007FEECF099B7) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search
Query Processor e2o1 High In CRootQuerySpec::Execute - caught exception: 0x80040e31, translated to: 0x80040e31 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Administration 0000
High Log Query: More Information: Execution stopped because a resource limit was reached. No results were returned.
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1
High Error while executing web part: Microsoft.SharePoint.Search.WebControls.Srhdc GenericException: Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
---> System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() --- End of inner exception stack trace --- at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.get_ResultsReturned() at Microsoft.SharePoint.Search.Internal.WebControls.CoreRes...
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08* w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1 High ...ultsWebPart.ModifyXsltArgumentList(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean
bDeferExecuteTransform) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a2
High InnerException 1: System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart ()). Execution Time=15302.2074034549 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.09 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=15358.1002613461 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png))
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png) f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af71 Medium HTTP Request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af75 Medium Overridden HTTP request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af74 Medium HTTP request URL: /tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.60 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png)). Execution Time=9.75459171486879 f0d03f8e-d78b-4004-9a5f-3ee9955afa60
Not sure what "resource limit is reached" actually means. This SharePoint installation is running under regular SQL 2008 R2, and the
WSS_Content database is fairly small (10gig). I've reviewed the Search Service, the process account running it, the
WSS_SEARCH index database, and verified that the Content database is using the proper index database. Everything looks like it should be crawling/indexing/working fine. But the WSS_SEARCH
database isn't very large, so I'm not sure if the crawling is actually filling it with anything.
Not sure where to start seriously troubleshooting this. Any advice would be appreciated. Thanks.

Hi,
The query ran in tens of seconds. This indicates that at some point a bad plan compiled and stayed in the cache.
It may have gotten there because the statistics were out of date.
A possible way to keep this from happening is to rebuild statistics with full scan more frequently.
Try free the proc cache and see the result.
http://msdn.microsoft.com/en-us/library/ms174283(v=SQL.105).aspx
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Your search cannot be completed because no search service is available- SP2013

Hi,
We have an application page, in which we need to retrieve the search results in SP2013. However, the query always returns the error "your search cannot be completed because no search service is available". Please find the code below.
using (SPSite site = new SPSite("http://server"))
using (SPWeb web = site.OpenWeb())
Microsoft.SharePoint.Search.Query.FullTextSqlQuery kq = new FullTextSqlQuery(site);
// KeywordQuery kq = new KeywordQuery(site);
//KeywordQuery kq = new KeywordQuery(site);
kq.SourceId = new Guid(SourceID_Value);
kq.QueryText = keyword;
kq.RowLimit = 100;
kq.AuthenticationType = QueryAuthenticationType.NtAuthenticatedQuery;
ResultTableCollection resultTables = new SearchExecutor().ExecuteQuery(kq);
ResultTable resultTableFinal = new ResultTable();
resultTableFinal = resultTables[ResultType.RelevantResults];
However, the same code works in a console application executed on the same server. Please let know if you have faced this issue and the solution.
Sreeharsha Alagani | MCTS Sharepoint 2010 |
Linkedin | Blog

Not sure if it's typo with your post or the code, the url in the first line doesn't contain a close quote.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Time machine says unable to complete back up an eror occurred while creating back up folder

Time machine shows error message "unable to complete back up an error occurred while creating back up folder" No error code is diplayed but if I turn the whole system off and restart it time machine backs up just the once

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine Error. Unable to complete backup. An error occurred while copy

I purchased my iMac 24" in February.
After I had set up the machine I configured an IceCube Firewire 300 GB (Seagate) Hard Drive as a backup volume and flicked the switch in Time Machine. All went as expected. I even restored my whole hard drive from the Time Machine volume about a month ago after I repartitioned the boot volume to set up Boot Camp. No problems.
About a week ago I purchased a 500GB WD HDD and set it up inside the IceCube enclosure (I remembered to make it the "Master" disk too!!). I partitioned it with Disk Utility with a GUID Mac OS X (Journaled) partition for my Leopard boot partition, and as MS-DOS FAT32 for my Boot Camp external partition. I used Carbon Copy Cloner to copy all the Windows files across from Boot Camp to the new FAT32 partition and set up Time Machine to make a backup of the Leopard boot partition.
After several hours Time Machine stopped with the error message above. ("Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup").
I have spent days formatting the new WD drive, repairing permissions on the boot drive, excluding large files and cache files from the backup in Time Machine to no avail. Every time I get the same message. I even set up another 200GB firewire drive to see if it was anything to do with the enclosure of WD HDD. Same result!!
I have searched these forums for any ideas, and have done wide searches with Google but nothing has worked.
I can not understand why my Mac worked perfectly with Time Machine before I installed the new Western Digital Hard Drive.
What have I missed?

I keep getting the Time Machine backup error too, like many others. Was fine until just the other day, now, nothing. Although my husband's backs up just fine. I assume it's the 10.5.3 bug everyone else has. I've tried reselecting the drive, running the disk utility, shutting everything on and off... help!
Here's the console log- anyone know what this means?
Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Starting standard backup
Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network mountpoint /Volumes/Library not owned by backupd... remounting
Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network volume mounted at: /Volumes/Library-1
Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Disk image /Volumes/Library-1/Tiffany Danko’s Computer (2)_001b63baf698.sparsebundle mounted at: /Volumes/Backup of Tiffany Danko’s Computer (2)
Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backing up to: /Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb
Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to create progress log file at path:/Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb/Tiffany Danko's computer (2)/2008-06-09-065427.inProgress/.Backup.234797868.792920.log.
Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Event store UUIDs don't match for volume: Macintosh HD
Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Error: (-36) Creating directory 77B4FA27-3E65-4B81-897C-610DEE7BB187
Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to make snapshot.
Jun 10 08:37:53 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backup failed with error: 2
Jun 10 08:37:58 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine disk image.
Jun 10 08:37:59 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine network volume.

FAST Search for SharePoint 2010 Installation Issues

Warning Errors in Crawl Log After New FAST Search Server document processor installation.
Message:
The FAST Search backend reported warnings when processing the item. ( Customer-supplied command failed: )
Message:
The Content Plugin received a "Processing Error" response from the backend server for the item. ( ProcessorDeploymentException: For pipeline 'Office14 (webcluster)',
creating processor

Solution:
1. Verify if all the service accounts are updated in FASTSearchAdministrator Group & FASTSearchKeywordAdministrator Group.
2. Check if Hotfixes are installed
3. Check if CU Service Pack 1 is installed. Once all this is set in place issue is resolved.

Microsoft FAST Search Server 2010 - Searching numbers

Here is the scenario. I have some documents each has a number in the content. The number is 10 digits long and the number contain leading zeros but the length will not be more than 10 digits. e.g. 0000123456
Once I index the documents in FAST Search (not MS Enterprise Search) I want to search for any number without adding the leading zeros in the search query.
Unless otherwise I enter the full number(with leading zeros), search will not give the document. Does anyone has similar experience and if so what was the approach you followed in order to solve it?
Thanks,
Kolitha de Silva ----------------- www.dkolitha.com / dkolitha.wordpress.com

Kolitha,
Assuming that the field is a string, you can try to use proximity operators especially if you know the last digits for example:
field:ends-with ("123456")
Alternatively, may be you can try:
NOT(field:starts-with("0000"))

Replace Self-Signed FAST Search Certificate with Third Party Certificate

We are trying to replace the Self-Signed FAST Search Certificate with Third Party Certificate in our SP 2010 environment. And are facing issues while enabling the SSL communication between the FAST servers and the corporate servers.
Our FAST search servers are in a different farm than that of the Corporate Servers.
The details of the certificate we received is as follows:
Issued to : FastSearchCert
Issued By: Issuer Name
Valid From: 4/21/2015 to 4/20/2017
We were able to successfully renew the certificate on the FAST Search Server by following the below steps:
1. Login to the Administrative and the Non-Administrative nodes
of the FAST server. Go to Windows Service and stop the FAST Search for SharePoint and the FAST Search for SharePoint Monitoring services in both the servers.
Follow the below steps in the Administrative Node followed by the Non-Administrative Node
2.
Install the certificate in the following paths in the certificate store:
“Certificates(Local Computer)\Personal”
“Certificates(Local Computer)\Trusted Root Certification Authorities”
3. Ensure that the user account configured for the “FAST Search Server 2010 for SharePoint” has access to the private key of the certificate.
4. Go the Administrative node of the FAST farm and follow the below steps:
Go to the certificate store.
Expand the Personal folder and then click the Certificates folder. Double-click the third party signed FAST certificate.
Open the Details tab and then click Thumbprint. Note down this thumbprint.
5. Next, open
Microsoft FAST Search Server 2010 for SharePoint with Administrator
Privileges.
6.
Navigate to the directory, “D:\FASTSearch\installer\scripts” and execute the below command to replace the current certificate with the newly created
third party signed FAST certificate.
.\ReplaceDefaultCertificate.ps1 -thumbprint "certificate thumbprint".
7. The FAST certificate was renewed successfully.
Once the certificate has been renewed successfully in both the nodes, follow the below step:
8. Start the FASTSearch for SharePoint and the FAST Search
for SharePoint Monitoring services in the administrator server.
Next, while enabling the SSL communication between the FAST servers and the other corporate servers, we follow the below steps:
1.
Copy the new certificate from any of the FAST servers to all the web-front end and application servers in the corporate farm, in order to enable SSL communication between these servers and the FAST farm.
2. Also, copy the script
‘SecureFASTSearchConnector.ps1’ from the location “%FASTSearchFolder%\installer\scripts” in the FAST servers
to the web-front end and application servers of the corporate farm.
3. Follow the below steps on each of the servers in the corporate farm:
Open ‘SharePoint 2010 Management Shell’ with administrator privileges and navigate to the directory in which
SecureFASTSearchConnector.ps1’ script is located.
And then, execute the below command:
.\SecureFASTSearchConnector.ps1 -certThumbprint "certificate thumbprint" –ssaName “FASTCibtebtSSA” –username “DOMAIN\SP_Farm”
Where,
-certThumbprint
- Thumbprint of the certificate
-ssaName – FAST Content SSA
-username – The account configured to run the SharePoint
Search Service
On execution of the above command, we receive an error message stating that the "Connection to the Content Distributor servername.corp.abc.org: 14391 could not be validated...instance of FAST search server backend is running"
Please help us resolve this issue. We have not been able to find the cause of the above error for a long time.
Any help is much appreciated.

Your tip on exporting from eDir to locate a missing private key was very helpful. Here are my steps to renew an expired third party certificate when the private key, generated 30 months ago in my case, could not be located.
In iManager, browse the tree and locate the likely certificate object. The Attributes for the object show Subject Name = webmail.acme.com. Selected the certificate and exported to webmailcert.pfx.
Then, the openssl commands in TID 7004039, "How to convert a SSL PFX to a PEM file", were run against the .pfx file to create cert.pem, key.pem and server.key files.
TID 7015500, "How to determine if private key belongs to public key (certificate)", was followed to determine if the public key (downloaded from third party) and private key (just retrieved from iManager) match - they did - that is, the private key converted from webmailcert.pfx matches the downloaded certificate.
TID 7013103, "How to create a .pem File for SSL certificate Installations", was followed to manually create a server.pem file using openssl.
TID 7010584, "How to setup SSL Certificate for Apache", part labeled "Additional Information" was followed to modify /etc/apache2/vhosts.d/vhost-ssl.conf file. Server.pem file created above copied to /etc/apache2/ssl.crt/ and /etc/ssl/servercerts/ directories as specified in vhost-ssl.conf.
Restarted apache2.
www.digicert.com has an SSL Certificate Checker that can be used to verify the installation is successful.

E-Rec ,Candidate Appears twice in fast search

Hi
We are using Standalone E-rec system EHp4 , Done with all the ALE Related configuration for Data Transfer b/t ECC to E-rec System , While Running PFAL(RHALEINI) for the first with the object type 'P' we missed to update the infotype 0006 , subtype 1 , we ran the PFAL for the object type 'P' for all the employee in Insert mode , we uploaded again infotype 0006 subtype 0001 in ECC system and Ran the PFAL again with the object type 'P' in insert mode for all the Employees .
After that to synchronize the data we ran Report HRALXSYNC in e-rec system , furher moving on we check the candidates in the Fast search application , there i can able to find two record for each internal candidate , but when we check the Relationship CP-P , CP-BP, CP-US all exists only one .
further to confirm this i Ran the PFAL for only one employee with insert mode , and again i could be find 3 entries in the fast search , increased by one .
Regards
Arumugam .

If you are sure this problem will not occur again in the future, then you can run the standard webdynpro application DELETE_EXTERNAL_CANDIDATE in e-Recruiting system to get rid of the duplicate candidates....
This application will delete the candidate completely from the system, including all the CP and BP objects and relations.
I hope this will help...

Please Help Urgent:Fast Search returning wrong result sets

Hi All,
We are facing below issue with fast search.
Currently in My project when we are searching for a phrase it is returning wrong result sets.
For example if we search for “Endura”, It is returning documents related to
Endura as well as Centura.
But the expected results are only Endura documents.
When we look in to the documents we didn’t find the search term (“Endura” ) either inside document content or in its meta data.
In order to resolve the issue we tried the below steps
1-
We manually edited and saved the document, to ensure the appropriate Guid association to metadata.
2-
Index reset
3-
Full crawl
But no luck so far.
Please help.Thanks in advance.
Regards
Subrat

Subrat,
This may be related to spellchecking or may be synonym. Spellcheck is based on indexed terms.
The best test would be to run the queries from qrserver (13280) and then look at the spellcheck query transformations. If spellchecking is not doing it, then you must have a synonym setup .Check your keyword/synonyms from the SharePoint side.

Fast searching record among 70 millions of records in database

Hi All,
Could you please give me some Idea how can I do fast searching among 70 millions of record in database? I have tried with lucene but unable to get desired result.
-Roy D

lucene? What's that?Don't know, but it reminds me of Lucille ;-)
sings a certain bluesy song
To OP:
Could you please give me some Idea how can I do fast searching among 70 millions of record in database?First you need to give us amore clear idea of what's going on.
Can you post your execution plan and describe your table(s), indexes, database-version etc.?
See: [How to post a SQL statement tuning request|http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0]

Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume.

Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume. tried everything.

Pondini's Time Machine FAQ for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Time Machine- Troubleshooting backup issues

FAST Search - Unable to Complete Query on BackEnd resource limit remporarily exceeded code:1013

Similar Messages

Maybe you are looking for