Fast/Slow/Reverse is not working?

I have tried to apply this effect numerous times without success. I set the markers in and out for the desired clip and click apply effect... The red render bar appears for no longer than a second then disappears and the effect has not been applied?

I notice that my main drive is Mac OS Extended - Journaled and the secondary drive does not say Journaled. I don't know what this means, but everyone seems to think the issue is with formatting.
Journaling is optional, so if your secondary drive says "Mac OS Extended" it should be OK.
Mac OS X: About file system journaling
http://docs.info.apple.com/article.html?artnum=107249

Similar Messages

Slow/Fast/Reverse DOES NOT WORK

I have read other posts on this issue. When I attempt to apply this effect, it does not work. This is a new project in iMovie HD 6. Clips will not take this effect. It shows up in the preview fine but will not apply. Below is what I sent Apple. Any and all help (solutions) appreciated. Is anyone else using this effect successfully in HD 6?
I select a clip (it is selected), click on the Editing tab, then click on the Video FX tab, and then select the fast/slow/reverse option. I am correctly using the slider to slow the clip down just one tick past the default position. The effect shows up in preview but will not apply. The red progress line (that indicates the effect is being rendered) shows up for about a tenth of a second and then stops. I am using the latest version of iMovie (6.0.3). I have a Dual 2 Ghz G5 Tower. I have 1.5 GB of ram. I am using OSX 10.4 8. All my software is up to date.
The camera I am using is a Sony VX2000. Never had a problem with iMovie 4 and 5. I have two internal drives. I have an external drive that is for backups only. All three are Mac OSX Extended (Journaled) format. The drive i am capturing to is the original drive that came with with my computer. It is 160 GB. 147 GB is free. I keep this drive clean and only for current projects.
I did have some plugins installed for iMovie from GeeThree. They are the updated versions for Intel and PowerPC running OSX 10.4.8. Again, all software is up to date. I did remove those plugins from the plugin folder. Also, I have ran Disk Utility and permissions are fine. I have not removed the preference files yet (plist) because I wasn't sure which ones to remove.
A third thing I did was to create a new project (after unstalling the plugins, restarting, using Disk Utility), reimport some footage and see if the slow/fast/reverse effect would work then. It did not work. I then saved all my current work and saved to tape. I NEED THIS EFFECT TO WORK! Please who can solve my problem? Dinner is on me!! LOL!
Mac OS X (10.4.8)

In addition to Karsten's great advice...
Read Karl Petersen's post in this discussion for the common reasons the video FX don't work:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
:)Sue

Audio Problems with Fast/Slow/Reverse Effect in iMovie HD

I have been having problems with the Fast/Slow/Reverse effect in iMovie HD with my movie clips. Whenever I apply the effect (reversing at the same playback speed, not sped up or slowed down), when it is finished rendering the audio is choppy, yet on time (but still backwards, as wanted). Before applying the effect, the preview of it works flawlessly, it is only when it is applied that the audio gets choppy. Extracting the audio will not help either because the video will still be playing backwards while the audio will be playing normally (since it can't be reversed on its own). I have tried other effects on the same clips that don't effect the audio and they work perfectly. Any suggestions? I'd really appreciate your help! Thanks.
Macintosh Powerbook G4 Mac OS X (10.4.6) iLife '05 : iMovie HD

Have you got an isolated hard drive with ALL of the required applications and other resources together with the operating system ? Using an external HD to SAVE a running iMovie project is asking for problems. Back up the Project on another HD sure, but don't use System on one HD, running files on another.
Hope Helps,
Ernie Lee

Fast/slow/reverse

when i apply the fast/slow/reverse effect, my video gets 'herky-jerky' and slightly blurred.
How can i fix this?
I recorded using the built in isight, and saved to a Mac OS X Extended (Journaled) drive.
Thanks in advance!

Matti Haveri, who posts on this forum, pointed out that iM6.0.2 renders deinterlaced vido when it exports to iDVD, so the motion in the fast/slow reverse effect is jerky when watched on an interlaced TV. You may be experiencing a carry over of that bug.
If it is that bug, Matti's suggested work around is to use the freeware program JESdeinterlacer to render smoother fast/slow/reverse. Check out the following site: www.xs4all.nl~jeschot/home.html#DEI
Or, to use iM4 if you still have it on your computer.
I use iM6.0.3, and my speed-up effect is jerky in preview playback, but seems to render O.K. when burned and played on an interlaced TV. So perhaps the bug as fixed or ameliorated in 6.0.3.

Can't "Apply" Fast/Slow/Reverse on some clips

I have some clips in my timeline that I cannot change the speed on. This typically happens with a clip that I already edited in some way. Particularly when I have already altered the playback speed on it before. When I try to do this now, the Apply button is grey and won't respond.
Anyone know how come? Thanks

I have a somewhat similar problem. For a while now, I haven't been able to apply any Fast/Slow/Reverse effects at all. I can select the effect, and even preview it in the main window, and when I click apply it even takes a little while and shows a progress bar while it "renders" the effect. But when it's done, I'm left with a clip with no thumbnail (in the timeline) that, when played, just plays what was there already, but since it extends the length of the clip in the timeline, the whole rest of the timeline is off from what the movie actually is.
I'm using iMovie HD 5.02
Anybody run into this before, or have any ideas?
Thanks

Even faster "fast/slow/reverse"?

I'm looking to play a video clip of clouds in super fast motion. The fast/slow/reverse effect shortens about 60 seconds to 12 but I want it to go even faster. Any ideas? Thanks.

Os use JES Deinterlacer for Slow, Fast and Reversed motion:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#speed

Slow-link detection not working.

Slow-link detection not working.
In our branch office in Ethiopia we are experiencing some issues with the access to mappings. Our main office is located in the Netherlands. The Offices are connected with a VPN site2site solution.
We map a home folder to H:\ (which is working).
We map a Document share to L:\ (which is not working).
We map a Programs share to X:\ (which is not working).
All shares are DFS namespace.
We have set the according GPO which results in the following reg keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\NetCache\SlowLinkParams]
"\\\\DOMAIN.XXX.NL\\dfsdata"="Latency=32000"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home1"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home2"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\ConcernData"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Programs"="Latency=360"
The detection says in the eventvwr (OfflineFiles) says:
Path \\ DOMAIN.XXX.NL \dfsdata\home1 transitioned to slow link with latency = 106 and bandwidth = 270472
So the Homedrive is working.
But when I try to access the DFS root I get:
Windows cannot access "\\DOMAIN.XXX.NL\dfsdata
You do not have permission to access....."
And yes, the user has permission.
So the L-drive and X-drive are not accessible.
How come?

Hi,
>>Slow-link detection not working.
Did we check group policy result to see if the policy setting was applied successfully? We can run command gpresult/v or gpresult/z to collect group policy result.
Besides, instead of just focusing on slow link, this issue may be related to DFS namespace.
Regarding this point, the following blog can be referred to for more information.
Using DFS Namespaces and Offline Files
http://blogs.technet.com/b/filecab/archive/2006/01/19/using-dfs-namespaces-and-offline-files.aspx
Regarding how to troubleshoot DFS namespace problem, the following article and blog can be referred to for more information.
How to troubleshoot Distributed File System Namespace access failures in Windows
http://support.microsoft.com/kb/975440/en-us
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

HT201210 Re ISO 7.1 update. My hsbc fast balance app is not working now. Any ideas?

Updated my iphne 4s to ISO 7.1 and now my HSBC fast balance app is not working.... any ideas?

Still a problem. After activating app it was okay, but then when trying to log in using normal procedure again it's the same old problem...

Problems with Fast/Slow/Reverse Effect

hey, for whatever reason when i apply the fast/slow/reverse effect on a clip, it won't play back. and when i apply the effect to a clip i have cut into sections it cuts the entire clip i wanted to 'slow mo'

Have you got an isolated hard drive with ALL of the required applications and other resources together with the operating system ? Using an external HD to SAVE a running iMovie project is asking for problems. Back up the Project on another HD sure, but don't use System on one HD, running files on another.
Hope Helps,
Ernie Lee

Quicktime Player fast-forward and reverse buttons not working for audio

I have Quicktime Player 7.7.3 for Windows and the fast forward/reverse buttons will not work while playing audio files. I've tried it with mp3 and m4a, neither will work.
The go to end/go to begining buttons are working fine.
The ff/reverse button don't work very well for video files, they only will move a few frames at a time, but they will not work at all on strictly audio files.
I've looked at the preferences, and the software is up to date.
the only way to ff/reverse is to go to Window > Show A/V Controls and use the Jog Shuttle, but that is a clumsy workaround. I'd rather have the playback buttons work properly in the first place.
Is there something else I should be doing (aside from purchasing QT Pro, that is)?

...stupid decision to replace the iTunes feedback...
Not replaced, just moved. Now grouped with all other Mac OS X feedback:
http://www.apple.com/macosx/feedback/
It's not a bug. If it was we would all have this problem. My Macs don't.
Shut iTunes down.
Go to ~/your user name/Library/Preferences and place the file "com.apple.iTunes.plist" in the trash.
Try iTunes again. If your problem is solved, empty the trash.

Why is Transform Tool "reverse position" not working??

Hi.. I have a part that I want to reverse the pitches of so that I can record it as audio and then reverse it so that it is a reversed version of the sound, yet it's playing the right pitches at the proper time...
I was under the impression that the transform tool could do this, however it is not working for me. Could some please enlighten me to my error?
Here is a video of my efforts:
http://collinatorstudios.com/video/transform.mov
-patrick

Nevermind.. I found this thread, where someone already brought this up.
http://discussions.apple.com/thread.jspa?messageID=762890
Someone said:
"Position
Time position of the event, referenced to the start of the MIDI Region (not of the song)."
as silly as that is (if it's true), it still doesn't work when I set it to "all"... It only works if I drag the part to the beginning of the song...
Apple should really hire me to help them fix this program.. (sigh).
-p

Reverser Replication not working for 2 Publish Instance

We have setup environment for 1 author and 2 Publish servers. Configured replication agent and reverse replication agent for both Publish Instances. For custom created comments (Java code from external Portal to create comment node) then reverse replication does not replicate comment on Author Instance. But when I post comment for campaign through CQ publish environment then it works properly. It gets replicated on Author Instance. So can anyone let me know what could be missing part for comments generated through custom java script.
Yogesh

Hi Sham,
In one of environment we are using publish and author server. Custom comments are replicating on Author environment. We are not using custom workflow or JCR observation.Created one more environment for Production setup where 2 publish and 1 author instance. For this comment are not auto replicated on Author instance.
Default comment modification and comment activation launcher are in place, no change in this. Does it not working due to additional Publish Instance and if so what additional setting will required to address it ?
Thanks
Yogesh

Mail is too slow or does not work at all

I have serious troubles to send and recieved mail from mail. Does not work on macbook, iphone, ipad - wifi or ipad. sometines very slow, sometimes no connection. No changes in set up. delete account, set up new on, reset - nothing helped. MN

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Reverse Lookup not working as expected 2008 Domain

Lately I have been noticing that reverse lookup has stopped working in my environment. I had a couple of questions.
Can we specify the second octet for example 10.2. ? Would this resolve all IP addresses in 10.2.1 – 10.2.254 ?
When I run ipconfig /registerdns on the local machine it registers but reverse does not register. Any ideas?
I appreciate all the help.

Hi,
Yes, you can specify the second octet. You can also specify the third octet if you wish.
Can you describe your environment a little more?
1. Are the clients domain joined and what DNS server are they pointing to for DNS resolution?
2. Is this DNS server authoritative for the reverse DNS zone?
3. What OS are DNS clients and servers running?
4. On the authoritative DNS server for the reverse zone, if you view the Security tab for properties of the reverse zone, what permissions are set?
Thanks,
-Greg

Reverse DNS not working

Noticed today that reverse DNS is no longer working for our (10) VMs. It was yesterday and had been for several weeks.
I removed and re-added one of them. Waited for over an hour and still not resolving.
PS C:\Windows\system32> Get-AzureService "emvpodeast2"
ServiceName             : EMVPodEast2
Url                     : https://management.core.windows.net/xxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx/services/hostedservices/EMVPodEast2
Label                   : EMVPodEast2
Description             : emvpodeast2 with Reverse DNS
Location                : East US
AffinityGroup           :
Status                  : Created
ExtendedProperties      : {[ResourceGroup, EMVPodEast2], [ResourceLocation, East US]}
DateModified            : 12/23/2014 10:32:34 AM
DateCreated             : 9/2/2014 7:44:55 PM
ReverseDnsFqdn          : fathersonholyghosttown.com.
WebWorkerRoleSizes      : {}
VirtualMachineRoleSizes : {}
OperationDescription    : Get-AzureService
OperationId             : xxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx
OperationStatus         : Succeeded
PTR Check:
http://mxtoolbox.com/SuperTool.aspx?action=ptr%3a191.238.18.70&run=toolpage

I'm having the exact same issue here.
There were no IP changes. Reverse DNS was working until it wasn't anymore. We noticed it on the 22nd December when about 400 e-mails were refused from our newsletter because there was no reverse DNS.
Tried reconfiguring like SIRob45 but to no avail.
PS C:\> Get-AzureService "assistimo"
ServiceName             : assistimo
Url                     :
https://management.core.windows.net/cac66cff-7d19-41a7-a012-e2197e145d36/services/hostedservi
                          ces/assistimo
Label                   : assistimo
Description             : S4 reverse DNS
Location                : North Europe
AffinityGroup           :
Status                  : Created
ExtendedProperties      : {[ResourceGroup, assistimo], [ResourceLocation, North Europe]}
DateModified            : 24/12/2014 17:33:26
DateCreated             : 14/11/2014 13:50:26
ReverseDnsFqdn          : s4.assistimo.pt.
WebWorkerRoleSizes      : {}
VirtualMachineRoleSizes : {}
OperationDescription    : Get-AzureService
OperationId             : 670e5f9b-206d-5b41-a3c7-f5acf5f89fcd
OperationStatus         : Succeeded
Results from
http://mxtoolbox.com/SuperTool.aspx?action=ptr%3a191.235.218.152&run=toolpage:
ptr:191.235.218.152
No ptr Records exist
History results:
Type
IP Address
Domain Name
TTL
PTR
191.235.218.152
assistimo.cloudapp.net
1 min
smtp diag
blacklist
port scan
subnet tool
Reported by PRD2.AZUREDNS-CLOUD.NET on 12/1/2014 at 11:15:54 AM (UTC -6),
just for you.  (History)  Transcript
Session Transcript:
MXTB-PWS3v2 468ms
  0  f.in-addr-servers.arpa  193.0.9.1  NON-AUTH  109 ms  Received 8 Referrals , rcode=NO_ERROR    NS tinnie.arin.net,NS ns-lacnic.nic.mx,NS ns3.afrinic.net,NS ns.lacnic.net,NS
sec1.authdns.ripe.net,NS sec3.apnic.net,NS a.arpa.dns.br,NS ns2.lacnic.net,
  1  tinnie.arin.net  199.212.0.53  NON-AUTH  31 ms  Received 5 Referrals , rcode=NO_ERROR    NS PRD1.AZUREDNS-CLOUD.NET,NS PRD5.AZUREDNS-CLOUD.NET,NS PRD3.AZUREDNS-CLOUD.NET,NS
PRD4.AZUREDNS-CLOUD.NET,NS PRD2.AZUREDNS-CLOUD.NET,
  2  PRD2.AZUREDNS-CLOUD.NET  65.55.117.43  AUTH  46 ms  Received 1 Answers , rcode=NO_ERROR    PTR assistimo.cloudapp.net,
We have no support contract and cannot submit a support request as suggested.
Thank you in advance.
Carlos R. Calado

Fast/Slow/Reverse is not working?

Similar Messages

Maybe you are looking for