"fast start" for .MP4 H264/AAC ?

Hi,
I am looking now for a "fast start" option in Compressor 4 for .MP4 H264/AAC encoded files.
Is there a way to do that ?
Thanks
Eric

Eric,
See if this works for you. Start with the Broadband High preset (you could use any preset). Open the Encoder pane; in File Format, choose Quick Time; Click on Video Settings and in Compression Settings, select H.264. Set your data and then Optimize for streaming. Return to Encoder and open Audio settings to specify thge format you want; In the Encoder, select Streaming and then select Fast Start. In the Extension box, change the extension from .mov to .mp4. You should wind up with a MP4 H.264 CBR preset.
Good luck.
Russ

Similar Messages

Fast start for Quicktime movies on the web

Hi All,
So I finished my first FCE project and posted the movie on my web site. But Quicktime doesn't start playing the movie until after it is completely downloaded. This doesn't happen with the other movies I have on my site, and as far as I can remember I used the sames options in Quicktime export. I selected the "fast start" option in the box "Prepare for Internet Streaming", as I always do.
Is there something more that I need to do when exporting a FCE project? Or is there another option that I forgot in the Quicktime export settings?
Thanks in advance for your help
Florence

OK, I tried again and again and again... and I finally know what I did wrong. The movie was exported from FCE with the fast start option, but then I opened in with Quicktime to make a small change (define the poster), and apparently this also removed the fast start option. Now I'll know not to change anything after the export :-/

Front Row plays audio but not video of MP4 H264 AAC files

SL 10.6.6
Here's the problem:
Take an MP4 movie file encoded with H264 and AAC thats plays with no problems in QT, iTunes, Front Row
Open this file in QT7Pro, add a mask using a GIF file then export as MP4 using video and audio pass through to avoid re-encoding
The new video file plays OK in QT and iTunes but only plays the audio track in Front Row - the video is just presented as a blank screen
This happens to every file i've tried it with.
I've tried trashing all front row caches/prefs/app support folders, installing/uninstalling/re-installing perian. i've tried changing the file extension to .mov .m4v .3gp - still the same problem the file plays perfectly except in Front Row
All the posts I can find on this topic seem to refer to subtitles causing a problem - these files have no subtitle track
Any suggestions?

I have faced the same problem exactly. Some seasons and one movie I have detected so far, do not show any video at all. If I open the same files in iTunes, they show ok. If I open the same files in QuickTime thought no video also. I guess it has something to do with QuickTime then. Try it yourselves in order to see if it is the same problms with you guys. If that is the case I will try to extract an older version of QuickTime from the installation package via Pacifist and see if that works.
Even if it doesn't work I am pretty sure they will come up with a new update fixing this, but the point is that Apple isn't used in making bugged updates, up until recent. What is wrong with them lately?
Anyway, as soon as I have news in the afternoon I will let you know

Poor quality when exporting to MOV (H264/AAC) with CS5 and CS5.5

Hi there,
I need to export my HDV sequence (1440*1080 Pixel 1,33 25fps) using HDV footage only to MOV format (with H264 / AAC codecs).
I'm using 1024*576 (1.0) SD preset with a correct video bitrate CBR 6mbs and the Quality is awful.
When I use the H264 format ( to get a .MP4 file) with the same preset (1024*576 square pixel >> CBR 6mbs) the quality is quite good. I 'm pretty happy with that. The only thing is that my client (TV) needs the clip in MOV format (including H264/AAC codecs) and the quality is awful. They expect me to use FCP as most of the journalists here in France use this application.
I tried with PREMIERE CS5 on a PC (windows 7 64 bits) >> 8G0 RAM, Dual Core
and with PREMIERE PRO CS5.5 on a mac
Same awful result when trying to export to MOV (H264/AAC).
I heard that PREMIERE can't properly export to this format? Is this correct? If so, i need to convince my client to use only MP4 (H264/AAC) files since I don't really wanna use Final Cut Pro or Media Composer to edit and export my clip.
Any tips ?
Thanks guys.
Julien

I had similar quality issues exporting H264 from PPro vs. Avid Media Composer. CHeck out this thread link http://forums.adobe.com/thread/854379?tstart=0.
I found it pretty helpful, it also links to another reference thread.
I think it's possible, but will take a bit of trial and error.
Good luck
Lindsay

How to export as mp4 and achieve effect of "fast start" in mov export

When exporting as a .mov one can check the "fast start" prepare for internet streaming option. This option allows the end user to start watching your video without waiting for the entire file to buffer/download. That's great.
However, when export as a .mp4 file, the same option does not exist.
Does anyone know how to achieve this "fast start" effect if exporting as an mp4?
I have an existing work around...just rename the .mov to .mp4.
I would like an .mp4 file because I use ezs3 to host my videos and the mp4 player options are far superior to the mov player options.
Thanks for your help.

I'm having the same problem. I want to export an .mp4 that can start playing as soon as it starts downloading from a web site. Until I can find a solution, I'm using .m4v files, but they're huge.
Does anyone have a solution?

Fast Start h264 files from FCPX ??

Is there a way to enable the Fast Start option on files exported from FCPX?
Whenever I place files on our webserver for online viewing, we set them to Fast Start so one can start viewing them as they download. h264 exports from FCPX do not do this. Is there a way to enable this setting in FCPX?

The dafault did not work, but using them as a starting point, I was able to cobble together a custom setting that works great. Thanks for helping me get over my Compresor anxiety!
I really like the Vimeo service as well, but we do a lot of unusual aspect ratio videos so we can't use Vimoe or Youtube for those videos. Hopefully one of them will soon support custom aspect rations.

Please prefix 'mp4:' to the stream name to record H264/AAC/HE-AAC encoded data at FMS using DVR...

I was able to modify the main.asc file in the application/livepkgr directory to include:
* DVRSetStreamInfo :
* This prototype was created to allow DVR recording funtionality to FLME to FMS
Client.prototype.DVRSetStreamInfo = function (info)
    var s = Stream.get( "mp4:" + info.streamname + ".f4v" ) ;
    if (s)
        if (info.append)
        s.record ("append") ;
        else
        s.record () ;
        s.play (info.streamname) ;
I get three status messages in the FLME encoding log:
Requested DVR command has been successfully issued to Primary FMS server for stream livestream1
Requested DVR command has been successfully issued to Primary FMS server for stream livestream2
Please prefix 'mp4:' to the stream name to record H264/AAC/HE-AAC encoded data at FMS using DVR feature
Now I have a few issues:
1. How to I fix the issue with the 3rd status message "Please prefix 'mp4:' to the stream name to record H264/AAC/HE-AAC encoded data at FMS using DVR feature" since the code above is prefixing the "mp4:" to the stream name.
2. In the applications/livepkgr/streams directory there is a file called "undefined.f4v" which is telling me the code above isn't passing the info.streamname variable.
3. Also, what do I need to do to playback this .f4v file. I've tried opening it with Adobe Media Player, but it doesn't recognize it.
I'm obviously using multi-bitrate streaming and that is working flawlessly. My goal is to record this livestream to later playback as an mp4 file.
Any ideas?
UPDATE:
I know on page 15 of the FMS 4.5.1 developers guide, "Configure DVR (HDS)" under "Publish a DVR stream", it states "To Publish a DVR stream from FLME, DO NOT check Record OR check DVR Auto Record. Publish the stream just as you publish any live stream. In the next section "Play DVR streams" is states that I can use SMP (Stobe Media Playback), which I am. So that brings up two more questions:
1. Why is my SMP Player not displaying the DVR funtionality (See image):
In my SMP configuration, my streamType is "LiveOrRecorded" - default. There is a streamType = "dvr", but will I lose live funtionality?
2. If I want to later on, package the stream into an mp4 file and play it back later for those who missed the live stream, what is the best approach for that?
Message was edited by: giostefani

Two things: You need to have "DVRCast" application on server-side i.e. "dvrcast_origin" for DVR recording to work and secondly for mp4 recording your stream name should be "mp4:<streamname>.mp4" while publishing.

Is it recommendale to deactivate the automatic update of search plugins for a faster start of FF?

I read that one can deactivate the automatic update for search engines in the settings because there are very seldom such updates (e.g. lastly in early 2010 for Google). This would provide a faster start of FF.
I don't want to have overaged search plugins that might cause trouble, so my question is: Is it recommendable to do this?
If you speak german, here is the URL where I found this:
http://www.computerbild.de/fotos/Mozilla-Firefox-20-verstecke-Funktionen-6272370.html#18

You can lock the related pref(s).
lockPref("app.update.auto", false);
lockPref("app.update.enabled", false);
See:
* http://kb.mozillazine.org/Locking_preferences

Optimun settings for Widescreen mp2 (m2v) converted to mp4/h264

ive recorded a few films of freeview (UK digital terrestrial tv - PAL-25fps) and, after exporting as m2v file (mpeg2), i want to convert to mp4 / h264 and have a good picture quality when watching on a 20inch imac.
At the mo ive tried using 368x208 (very small widescreen setting) with around 600kbps, keyframe every 25fps (to avoid that pulsing keyframe effect that i find really annoying with mp4).
Can anyone share with me a good setting for good quality mp4 ready to be viewed on a 20inch imac - hopefully alot smaller than mp2 (1.8gb for a 1hr40min film) - managed to get this 1.8gb down to around 1gb for a 1.40hr film

i know- just doing it in qt because i couldn't see a 'key frame every...' function in stream clip.
Cant see a export to apple tv function theres just a ipod button in the encode settings box. - im using version 1.8
Message was edited by: steveOooo

What format in expert settings for fast start on the web?

I exported a slide show to QT from iPhoto. Unlike imovie that gives you the possibility to use expert settings to export a fast start, iPhoto doe not have the option to export to expert settings.
I want my QT slide show to begin to play as it uploads on the .mac web page. By accident, (I don't know what I did) one of my video has a fast start on my web pages, it starts playing before it has finished uploading. On the other hand, most of my other videos or QT slide show, have to fully upload, which can take 5-10 minutes, before the viewer can see it playing.
Also, If I open my QT slide show exported from iPhoto in the size of 7.1MB, and re-export it using QT pro expert settings using Fast start, the file become 91MB big...... way too big to post on the .mac account!
What is the difference between hinted, streaming, fast start, and compressed header? I'm getting a little confused with the choices!!!
please help!
Any suggestions would be appreciated!!!
michel

Some iPhoto slide shows (those that use only the fade effect) do not fast start. They are made up of three video tracks slightly offset in time and a tween track that sets the fade.
You could open them in QT Pro and use the save as menu. No re-compression but the file size will become three times larger because each of the video tracks will become independent (for lack of a better word). This new file will fast start.
Exporting isn't a good choice unless you use identical settings to the original (Photo-JPEG video codec and an extremely low frame rate).
The file size of the original is "trick" that can only be performed by iPhoto.

Fast start setting in Compressor 4

I'm asked by a client to put the "Moov atom" at the beginning of the encoding for a fast start of the .mp4 video. Can't seem to find where I can modify that setting.

Hey Albert.
You want to check the Optimize for Network Use" in the Inspector.
Good luck.
Russ

Fast start not working compressor 3.5.3

Hi, I am having a problem that I can't seem to resolve after much searching. I am compressing my video for my website using fast start. When I open my site, the video completely loads without playing on it's own. I have to hit the play button.
These are my specs in Compressor 3.5.3
Description: QuickTime H.264 video with PCM audio at 48 kHz. Settings based off the source resolution and frame-rate.
File Extension: mov
Estimated size: 599.04 MB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width: 640
Height: 480
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 24
Frame Controls On:
Retiming: (Better) Motion Compensated
Resize Filter: Linear Filter
Deinterlace Filter: Better (Motion Adaptive)
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 75
Min. Spatial quality: 25
Temporal quality: 50
Min. temporal quality: 25
Average data rate: 1.331 (Mbps)
Fast Start: on
My original video is 29.97fps 720X486 and I am compressing it to 24fps 640X480.
I appreciate any help.
Message was edited by: kyanos1

Thanks for your help. That didn't work but now I'm wondering if all of the settings on my site allow for fast start. It works for some but not all of my videos.
Thanks again

Detecting Fast start or Hinted Streaming

I have got a task of making H264 files the same way they were made before I took over the job,... however in the Movie information tabs I do not see the the specification of whether it is "hinted streaming" or "fast start" or "fast start compressed". Is there any way of finding out from the old file? I know the videos are suppose to be streaming but I believe that they were only "fast start".
thanks for any information!

No way to tell about fast start except by testing the file from a server as it is a property of the individual file (part of the header info).
You could view this by using a "hex" editor but that would be a pain.
Streaming tracks are extra data and will show in the Movie Properties window. But these tracks are just extra file size and are ignored if your files merely download (not served via streaming server software like RTSP).
So. If your files are viewed in a Web page they only need fast start (Progressive Download). This is done at export (Movie to QuickTime Movie). As long as the file isn't edited after export fast start will remain. If edited and "saved" fast start is removed from the file. To restore fast start simple "Save As".
If you have a bunch of files that need to be fast start you can batch process using AppleScript or Automator.
Save as doesn't do any conversion so it is very fast. It does put your files tracks into a .mov container, however.

Fast Start Failover has broken my Logical Standby and Flashback has not helped

I have a primary ( PRIMARYP ), a physical standby ( STANDBYP ) and a logical standby ( STANDBYL ).
I configured Fast Start Failover ( with STANDBYP as the target ) and started an Observer. I did a shutdown abort on my primary and the Fast Start Failover did make STANDBYP the primary. I was able to reinstate PRIMARYP as a physical standby.
However when I checked my broker config it gave for STANDBYL
ORA-16795: the standby database needs to be recreated
Strange I though, since I would have expected STANDBYL to survive ok given that the new primary, STANDBYP was a physical standby of PRIMARYP.
Not to worry I thought, I simply will flashback STANDBYL to the beginning of the day and SQL APPLY will reapply all the redo.
This is where the problem begins
I mount STANDBYL
RMAN> connect target /
connected to target database: STANDBYL (DBID=440422466, not open)
RMAN> flashback database to time "TO_DATE('05/12/13 09:30:00','DD-MM-YY HH24:MI:SS')";
Starting flashback at 05-DEC-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=11 device type=DISK
starting media recovery
archived log for thread 1 with sequence 24 is already on disk as file /home/app/oracle/fast_recovery_area/STANDBYL/archivelog/2013_12_04/o1_mf_1_24_99yqwog0_.arc
archived log for thread 1 with sequence 25 is already on disk as file /home/app/oracle/fast_recovery_area/STANDBYL/archivelog/2013_12_05/o1_mf_1_25_9b0mlyvr_.arc
media recovery complete, elapsed time: 00:00:04
Finished flashback at 05-DEC-13
RMAN> quit
Recovery Manager complete.
oraclel[STANDBYL]>dgmgrl
DGMGRL for Linux: Version 11.2.0.3.0 - Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/manager
Connected.
DGMGRL> shutdown;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
DGMGRL>
DGMGRL>
DGMGRL> startup;
ORACLE instance started.
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
ORA-01589 - that a nasty surprise ! I didn't think I would need to do anything with the log sequences after a flashback
Any ideas of what is going on ?
thanks,
Jim

Hello;
This pdf might meet your needs :
http://blogs.oracle.com/AlejandroVargas/resource/DATAGUARD-FSFO-IMPLEMENTATION.pdf
Additional info :
http://oracle-tech.blogspot.com/2008/08/fast-start-failover-it-is-reliable.html
http://jakub.wartak.pl/blog/?p=80
http://www.databasejournal.com/features/oracle/article.php/3849106/Fast-Start-Failover-in-Oracle-11g-Data-Guard.htm
Best Regards
mseberg

Protection Modes and Fast-Start Failover

Oracle Maximum Availability Architecture allows you to set fast-start failover (FSF)to automatically failover to the standby in the event of losing the primary database.
One condition of FSF is that it will only initiate if there is a guarantee of no data loss. This is where i start getting confused. Maximum Availability mode allows for data loss as the primary will still process transactions if the connection to the standby is lost. This means then in the event of the standby being out of sync with the primary database (i.e. network glitches) and then losing the primary database to hardware issues for example. FSF will not be able to initiate as data will be lossed and a complete loss of service will happen!
Can FSF be used in Maximum Protection mode as this will always mean FSF will be able to occur? Also what is the overhead towards the databases with regards to running them in this mode?
Thanks,
Chris

Hi,
Can FSF be used in Maximum Protection mode as this will always mean FSF will be able to occur? Yes, Maximum Protection Mode can be used with Fast-Start Failover, please review the next link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/cli.htm#BABEIIHD
Also what is the overhead towards the databases with regards to running them in this mode?
Yes, the overhead is on major scale that other modes.
Regards.

"fast start" for .MP4 H264/AAC ?

Similar Messages

Maybe you are looking for