Fast start not working compressor 3.5.3

Hi, I am having a problem that I can't seem to resolve after much searching. I am compressing my video for my website using fast start. When I open my site, the video completely loads without playing on it's own. I have to hit the play button.
These are my specs in Compressor 3.5.3
Description: QuickTime H.264 video with PCM audio at 48 kHz. Settings based off the source resolution and frame-rate.
File Extension: mov
Estimated size: 599.04 MB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width: 640
Height: 480
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 24
Frame Controls On:
Retiming: (Better) Motion Compensated
Resize Filter: Linear Filter
Deinterlace Filter: Better (Motion Adaptive)
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 75
Min. Spatial quality: 25
Temporal quality: 50
Min. temporal quality: 25
Average data rate: 1.331 (Mbps)
Fast Start: on
My original video is 29.97fps 720X486 and I am compressing it to 24fps 640X480.
I appreciate any help.
Message was edited by: kyanos1

Thanks for your help. That didn't work but now I'm wondering if all of the settings on my site allow for fast start. It works for some but not all of my videos.
Thanks again

Similar Messages

  • HSBC fast balance not working

    HSBC fast balance not working after installing iOS 7.1

    I've seen a number of other reports of this. The following previous discussion has a solution that may or may not work: https://discussions.apple.com/message/25140943#25140943
    If it doesn't work, you may want to contact HSBC -- see the bottom of http://www.hsbc.co.uk/1/2/ways-to-bank/mobile

  • Is fast boot not working for you? This is how you get it working correctly...

    Ok so after two days of trying to register on this site, the 50th activation email finally worked...
    Anyway I was trying to figure out why fast boot wasn't making much of a difference it seemed like once it booted quick but may have just been random. My setup is Z77a GD65 with two Samsung 830 128GB in RAID 0.
    It was taking about 30 seconds from pushing the power button to getting into windows and that was with fast boot enabled. That did not seem right. After messing around for a while and researching I came across many mixed reviews about doing this or doing that. Windows 8 Feature... The windows 8 feature is from my understanding and research for secure boot...
    If your just wanting the faster boot times using fast boot. Just enable MSI Fast Boot, and install the Fast Boot utility so you can get back into the bios. When you enable fast boot, this disables usb devices etc so you can't get into the bios when booting. This little utility is really useful as it will boot you from windows right into your bios etc. KEEP READING STILL NEED TO DO MORE!!!!!
    Now for fast boot to work correctly you need to make sure you installed windows 8 in uefi mode. I read a couple people ask this question but I don't think they got the right answer or people just said yea I have a uefi motherboard and windows 8. That is not what people have been asking you.
    To get this working correctly format a flash drive using rufus while choosing your win 8 iso.
    You can get that here and it explains it and the settings to choose. I had to break up the link as the forum would not let me post the link. Maybe a mod can fix the links.
    eightforums .com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html
    After that is done you should then see in the bios a boot option for a UEFI usb flash drive. Make sure your boot mode is using UEFI. Otherwise it will be using legacy mode and not show uefi devices. I selected UEFI only just to make sure. Then choose this uefi flash drive as your first boot device and save and reboot to install windows from this uefi flash drive.
    It should look like this
    Once your at the install screen delete your partititons from the drive you are going to install windows on. So that it is unallocated. Then select new and apply. This will create 4 partitions. Here is a nice quide for doing that and explains it all. eightforums .com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows-8-a.html
    Basically your partitions should look like this.
    Once you have installed windows you will then know if you installed in uefi as your splash screen will be different. Instead of just the MSI splash screen you will then see the windows loading square/circle as well on this same splash screen. You will now have a boot option called UEFI Windows Boot Manager. Select that one as your first boot device and then enable MSI Fast Boot.
    Sorry if this post is cluttered I will add some more pics and clean it up in a bit. It's really early.

    Quote from: RemusM on 22-February-14, 01:41:27
    If one SSD fails, you lose the data on both SSDs.
    In your case, you lose 128 GB.
    Period.
    You continue to argue on silly things and you miss the main point:
    RAID 0 on SSDs does not make any sense.
    RAID 0 (striped volume) has been designed for spinners.
    It's a workaround to reduce the access time (a few miliseconds) caused by the mechanical parts of the HDD.
    For a SSD (with a few microseconds access time) does not bring any boost.
    http://www.tomshardware.com/reviews/ssd-raid-benchmark,3485-10.html
    On contrary: shorter lifetime for both SSDs
    So (for the last time) the best solution in your case is:
    Put the OS on the first SSD (drive C) and the other programs/games on the second one (drive D).
    There is no need to kill both SSDs at the same time (for nothing).
    And finally, talking about this silly "fast boot" of yours:
    5,10,20, or 30 seconds is something irrelevant.
    Simply because you get the max speed on an "empty" OS only.
    With every installed app (most of them come with bloatware anyway), your boot time is getting longer and longer.
    On the other hand, who cares if it takes 10 or 20 seconds?
    Only someone with mental problems needs to boot up the computer all day long.
    99.99% of the users boot up the computer once or twice per day.
    From my point of view, this topic is closed.
    You're free to think and do anything you like.
    I take it you are extremely hard headed and only view this from your opinion. Even with your logic of "If a drive fails you lose 128GB of data is wrong." If a drive fails I would lose 256GB of data if the RAID was full...
    The way you originally worded it made it sound like you thought RAID 0 only uses the capacity of one drive... I was trying to clear that up by saying it uses the capacity of both drives and ends up being 256GB capacity but I guess you couldn't wrap your head around what I was trying to say.
    Think what you want... but everyone I know on all of the tech forums I have been on for years, "EVGA, HARD, etc" 99% of users prefer running OS in RAID 0 on SSD's. Anyone with half a brain does not store important files on a RAID 0 array. I even created a new thread on EVGA asking how members prefer installing Windows with two identical SSD's. Most of them said they always run a RAID 0 for OS on SSD's. A couple others said they prefer running Windows/Programs on one SSD, and Games on the other. Usually that is because when they reformat they can simply re initialize the steam directory on the second SSD and then you don't have to reinstall all of your games.
    I respect your opinion but saying RAID 0 on SSDs does not make any sense is crazy talk. And that fast boot is only for people with mental problems lol... you sir have issues. Why do you think they made this feature? Why do people OC? A lot of people do it because it is fun, they are enthusiast, and they like to push a system. Why do people buy SSDs if its only a few seconds faster when you only turn on your computer once twice a day? When you only open an app or launch a game a couple times a day.

  • Fast Start not so fast?

    Carefully followed instructions for "Preparing a Movie for Fast Start". Uploaded the 5Mb file to my Web server and mailed the link to a friend. Friend says it took two minutes to start? I thought this was supposed to "stream". Any thought on where to look for cause and solution?

    I thought this was supposed to "stream".
    No, it is the playback of media which begins as soon as the player estimates it has cached sufficient data to preclude the premature stopping of playback before reaching the end of the file. If the internet connection data throughput is consistent, the estimate is usually fairly accurate. However, if it varies drastically, playback may be interrupted frequently during playback.
    Any thought on where to look for cause and solution?
    Check the internet connection speed, ensure "Fast Start" option is embedded, and/or ensure you are using a multimedia compression format/player setting that does not force playback to delay until the end of the file is downloaded.
    Friend says it took two minutes to start?
    2 minutes for a 5 MB file does sound a bit excessive. I have a test 20 MB file that takes less than 2 seconds (emptied cache) to begin playback using my ISP. Here is the QTL file link if you want to test it for comparison: TEST FILE

  • Fast start setting in Compressor 4

    I'm asked by a client to put the "Moov atom" at the beginning of the encoding for a fast start of the .mp4 video. Can't seem to find where I can modify that setting.

    Hey Albert.
    You want to check the Optimize for Network Use" in the Inspector.
    Good luck.
    Russ

  • GL Account in Fast change not working - is any Exit or BADI available?

    Hi All,
    In ME21N/ME22N, there is a Fast Change Icon at the item level after Copy Item Icon.
    When clicked on it, we can see the hidden fields in it which are present in the structure
    MEGUI_MASSCH_ALLOWED_FIELDS
    Now I want to add one more field which is the GL ACCOUNT (SAKTO) in this list.
    So I added this field to MEGUI_MASSCH_ALLOWED_FIELDS structure by doing an Append Structure.
    I can see the GL Account FIELD in the structure MEGUI_MASSCH_ALLOWED_FIELDS
    but when we assign any value and execute it is not making any difference in the Screen.
    Please help me if any Exit or BADI is avalialbe which works for the above scenario.
    Thanks in advance.
    Wahid hussain.

    Answered.
    Thanks,
    -Syed.

  • Java Web Start not working with Proxy

    I have Java Web Start program not listening to proxy settings. It tries to access localhost using our proxy settings, but with no user name or password. I'm wondering if Java Web Start has proxy settings somewhere. I'm not sure since when we disable the proxy settings the program works without issue. Any thoughts?
    Thanks

    For instance Safari uses those System Proxy settings, Firefox uses it's own!
    So Java is using it's own, now we're waiting for an expert to drop in!

  • Mac OS X - deep links in youtube not working, fast forward not working

    Specs: Mac mini 1.66 Intel Core Duo, OS 10.6.8 Snow Leopard, Flash 11.1.102.64
    Adding, for example #t1m30s, to the end of a youtube url does nothing, videos always start at the beginning. Yes this is an older computer but deep linked youtube videos work fine in Firefox but not Safari. I have another Mac Mini slightly newer, a Mac mini 1.83 Intel Core 2 Duo with same software specs and deep links work fine on it.
    Also I can't seem to drag the marker anymore. Very frustrating.

    While you might get an answer from someone here (I'm interested in knowing too, I run into the drag problem from time to time) I think you'll have better luck over on YouTube's forums.
    Chris

  • GL Account in Fast change not working

    Hi All,
    In ME21N/ME22N, there is a Fast Change Icon at the item level after Copy Item Icon.
    When clicked on it, we can see the hidden fields in it which are present in the structure
    MEGUI_MASSCH_ALLOWED_FIELDS
    Now I want to add one more field which is the GL ACCOUNT (SAKTO) in this list.
    So I added this field to MEGUI_MASSCH_ALLOWED_FIELDS structure by doing an Append Structure.
    But it is not making any difference. i can see the GL Account FIELD in the structure MEGUI_MASSCH_ALLOWED_FIELDS
    but when we assign any value and execute it is not making any difference in the Screen.

    You were a bit optimistic, no ? even customer fields that were some times ago were not changed even if displayed ([Note 356628 - ME21N Fast change customer-defined fields displayed|https://service.sap.com/sap/support/notes/356628]) - i fear that you are going into a modification of standard if you want to continue on this way...
    Regards,
    Raymond

  • Materialized view - fast refresh not working on joins

    Hello,
    Is it true that fast refresh for materialized view is not possible when I do a union of 2 tables, although both tables have materialized view logs ?

    there are a number of restrictions with fast refresh, read Materialized View Fast Refresh Restrictions and ORA-12052 [ID 222843.1]
    edit: his royal kyteness has posted on this before
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6506967884606
    Edited by: deebee_eh on Apr 25, 2012 3:13 PM

  • My keyboard shortcuts started not working when I updated to iOS 6?

    For example, I made is so when i type in "wru" it puts in "where are you"
    This isn't working for me since I have updated to iOS 6.
    Please help, thank you!

    Today, I did a restore on my iPhone 4S, then reinstalled ios 6.1.1.    My airplay works now as I had set it up as a new phone instead of restoring the from one of the backups.
    Sometimes when a person restores a phone from one of the backups, you will just reinstall the previous problem.  I also did not setup iCloud when I reinitialized my phone for I did not want the processing to be impeded.
    I'll setup iClould later and see if that causes airplay to stop working as I think that was the cause. 
    I believe the problem was that there was just too many apps running in the background and too little ram and/or processing power left for airplay.  With the new ios 6.1.1, it probably takes up more processing than previous versions and just enough to shutdown airplay and keep it from running. 
    Miket502,  you might have a simular problem.  I'm not telling you what to do with your phone, but it may be a solution to do what I did.

  • FAST refresh not working for Cube & Dimensions in AWM

    Hi,
    My doubt is regarding refreshing cube/dimension using FAST refresh method in AWM     
    1     My dimension (MVIEW refresh enabled in AWM) is refreshed without an error when I pass the refresh method parameter as *'F'* in DBMS_CUBE.BUILD() script, although there is no MVIEW log present on the dim table.
         In ALL_MVIEWS.LAST_REFRESH_TYPE, a *'COMPLETE'* refresh is logged.
    2. My CUBE doesn't allow to select refresh_type=FAST when there is no MVIEW log built.
         The same CUBE (MVIEW refresh enabled, refresh_type=FAST in AWM) throws following error even when I create Mview logs for all fact and dimension tables in the DB.
    java.lang.NullPointerException
    at oracle.olap.awm.dataobject.DatabaseDO.commitOLAPI(Unknown Source)
    at oracle.olap.awm.dataobject.aw.WorkspaceDO.commitOLAPI(Unknown Source)
    at oracle.olap.awm.dataobject.olapi.UModelDO.commitOLAPI(Unknown Source)
    at oracle.olap.awm.dataobject.olapi.UModelDO.update(Unknown Source)
    at oracle.olap.awm.dataobject.olapi.UCubeDO.update(Unknown Source)
    at oracle.olap.awm.dataobject.dialog.PropertyViewer.doApplyAction(Unknown Source)
    at oracle.olap.awm.dataobject.dialog.PropertyViewer$1ApplyThread.run(Unknown Source)     
    If I continue with this error, CUBE mview vanishes from the DB.
    Please help - How to do a FAST refresh for CUBE and Dimensions.
    Edited by: 861346 on May 26, 2011 12:12 AM
    Edited by: 861346 on May 26, 2011 12:13 AM
    Edited by: 861346 on May 26, 2011 12:14 AM

    If your object is to process the cube as quickly as possible, MV refresh of the cube is probably not required. As an alternative, you can do the following:
    - Map the cube to a view and use a filter control what data is presented to the cube during a refresh.
    - Avoid dimension maintenance (adding new members, dropping members, changing parent-child relationships).
    Let's say you update your cube daily with sales data coming from 10,000 stores. You could add a LAST_UPDATED column to the source fact table, timestamp rows whenever the fact table is updated and then filter on that column in a view to present only the new or changed records to the cube (or whatever filtering scheme you might like).
    Dimensions are always entirely processed (compiled) regardless of what data is presented to them, so there isn't any advantage to timestamping the records in the dimension table and filtering on them. What is important to understand is that any change to a hierarchy (adding members, deleting members, changing parentage) will trigger re-aggregation of the cube. If you can batch those changes periodically you can limit how much of the cube is processed during a refresh.
    Continuing with the example of the daily update of the sales cube, we can examine two scenarios. In both cases, the cube is partitioned by month and a fact view filters for only the new or updated fact records (let's say there are new records every day).
    Scenario 1
    New records are added to the sales fact table and new stores are added to the store dimension table each day. The store dimension will be updated with new stores, new records will be loaded from the fact table and all partitions will be processed (loaded and solved/aggregated).
    Scenario 2
    New records are added to the fact table, but new stores loaded into the store dimension only once a week (e.g., Saturday). The fact view filters for only new or changed records and stores that currently exist in the store dimension. For Sunday through Friday, new or changed records will be loaded from the fact table and only those partitions in the cube that have new or updated data will be solved / aggregated. (If there are no changes to hierarchies and no records are loaded into a partition, that partition is not solved / aggregated). On Saturday, new stores are added to the store dimension table and the store dimension and the cube are updated. Because the store dimension has changed, all partitions of the will be processed.
    With scenario 1, data for new stores are available each day but the entire cube might be solved each day (if there are new stores). In scenario two, new stores are not available until Saturday but the processing of the cube will be limited to only those partitions where there is new fact data.

  • Camera started not working

    hi yall. i have hp envy6-1113tx and first it was all good and after some time cyberlink,which is the camera programm, had updated after that it stopped working and when i go to camera it`s just blank . what should i do ? by the way i tried to reinstall cyberlink but by an error it can`t be installed and it has uninstalled itself
    This question was solved.
    View Solution.

    Hi Jayan,
    Something to try / consider:
    First, reset the notebook; this is a deliberate disconnect and reconnect of all the hardware drivers.  The forced reset will reset that webcam along with the rest of the hardware.  The reset does not affect your data or programs.
    Notebooks- Forced Reset to Resolve Hardware and Software Issues- Sealed Non-Removable Battery
    OR
    Notebooks - Use Hard Reset to Resolve Hardware and Software Issues - Removable Battery
    Next, open the Control Panel > Programs and Features and make sure that the Cyberlink software is actually "gone".  If it is still lingering about, then close the Programs and Features and remove the Cyberlink software with this program:
    Fixit -- Fix problems with programs that can't be installed or uninstalled
    Reboot the notebook and log in...
    Check and make sure that Cyberlink software is finally gone.
    Next, try an install of the Cyberlink software:
    sp59986 Cyberlink YouCam Software V3.5.5.5811
    Assuming the Cyberlink installs:
    Another reboot might be nice -- Windows just loves a good reboot.
    See if the camera works.
    =================================================================================
    Webcam Troubleshooting - Windows 7
    Webcam Troubleshooting (Windows 8)
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • MSI GTX 660 + Asrock super fast boot not working

    I have asrock 970 pro3 with super fast boot requiring uefi gop card.
    i just bought msi GTX 660 TwinFrozer OC 2GB (sn  602-v287-050B1212061316 )
    when i turn on this option i got error message this card doesnt supoport uefi gop and thus cannot turn off csm (i dont have option to turn csm mode off on mb, its pure efi.
    Is it problem with board or card? or maybe it can be fixed with some modded rom?
    Really thanks for feedback

    just tried, i just got black screen and hangup, had to reset bios and swap graphic cards just to get to bios to turn super boot off.
    no more your card dont support, now there is only black screen of death. i even tried to attach it to yamaha 3020 to chech if there is any signal and there was none. Without uefi gop everything works fine.
    i think this is more of a problem.

  • Oracle Fast Formula not working as intended.

    Hi all,
    I am fairly new to Oracle HRMS and payroll and there is an issue that is completely baffling me. I will enumerate the steps I have taken:
    1/ I have set up and element Bonus as recurring, Classifications Earnings, with input values pay value (default) and salary (user enterable and database item)
    2/ Created the element link and linked the element to my payroll (Test Payroll)
    3/ Wrote a formula
    Default for BONUS_SALARY_ENTRY_VALUE is 0
    tax_amount= 0.17 * BONUS_SALARY_ENTRY_VALUE
    return tax_amount
    4/ I went to formula result, chose standard ( I also did a test run with active assignment). I also chose direct result with input value pay value.
    5/ Allocated a person to the test payroll
    6/ Allocated the element to that person
    7/ Entered an input value for salary of 100000 in the in put value of the element
    8/ Ran the payroll for a period.
    9/ The employee shows up but the pay value is not updated. I have tried many times and failed continuously to update the pay value.
    Please help.
    Regards,

    Hi,
    Where is the INPUT statement in your FF.
    Default for tax_amount is 0
    INPUTS ARE salary
    tax_amount = 0.17 * salary
    retun tax_amount
    Note: In formula result window, set the returned value "tax_amount" as a direct result to "Pay Value" of the element bonus.
    Hope this helps.
    MAK
    Edited by: user1175432 on Aug 7, 2012 4:25 AM

Maybe you are looking for