Fast-Start On-Demand Roll Back
Fast-Start On-Demand Roll Back, how to enable it?
Regards
Neo
suzanne wrote:
Hi:
I'm sorry for not replying sooner but I have been away from home. I have found what you asked, I think. Can I just post it here or should I send it to you privately somehow? In other words, is there anything in this file which could pose a security risk if someone else sees it.
This morning, I was finally able to do a scan and then upgraded Sophos at which point I was able to turn on-access scanning back on without doing the things you suggested. Is this going to keep happening?
Many thanks,
Suzanne
Hello Suzanne,
Thanks for sending the logs to us, it was very valuable. The error that you (and probably others) are seeing is definitely an issue we've improved and likely fixed in the 9.4 release that is currently in preview. We expect to release this version to everyone at the end of this month, if everything goes to plan.
If you'd like to install it now, see this posting:
http://openforum.sophos.com/t5/Sophos-Anti-Virus-for-Mac-Home/Version-9-4-0-Preview-Now-Available/td-p/21401
Thanks again for your assistance, definitely helped show what went wrong and confirm its one of the issues addressed in the next update.
Similar Messages
-
Trying to roll back OAF-extension
Hi!
I get this stack trace when trying to run ICX-module of iProcurement. I'm trying to start from scratch, rolling back my extensions. Now it seems that the AM is looking for an old file (TeReceiveItemsTxnVO) which it should no longer need. I have deleted the systems folder and the directories where the extension (prefix: Te) classes used to be, both under myprojects and myclasses. I have started a new project in a fresh workspace using only the original objects..
Does anyone have any clue of where this dependency could be? An xml-file somewhere under jdevhome?
oracle.apps.fnd.framework.OAException: Could not load application module 'oracle.apps.icx.por.rcv.server.ReceiveItemsAM'.
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:279)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
JBO-30003: Applikasjonsgruppen (teop001.ahus.noTEST1522oracle.apps.icx.por.rcv.server.ReceiveItemsAM) kunne ikke sjekke ut en applikasjonsforekomst på grunn av dette unntaket:
oracle.jbo.JboException: JBO-29000: JBO-25002: Fant ikke definisjonen te.oracle.apps.icx.por.rcv.server.TeReceiveItemsTxnVO av typen Visningsdefinisjon
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1610)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2357)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:427)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:214)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(OAHttpSessionCookieImpl.java:473)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Fant ikke definisjonen te.oracle.apps.icx.por.rcv.server.TeReceiveItemsTxnVO av typen Visningsdefinisjon
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:329)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:269)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:649)
at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:369)
at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:494)
at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:673)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:369)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:135)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:76)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:1984)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:361)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1543)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2357)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:427)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:214)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(OAHttpSessionCookieImpl.java:473)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
JBO-30003: Applikasjonsgruppen (teop001.ahus.noTEST1522oracle.apps.icx.por.rcv.server.ReceiveItemsAM) kunne ikke sjekke ut en applikasjonsforekomst på grunn av dette unntaket:
oracle.jbo.JboException: JBO-29000: JBO-25002: Fant ikke definisjonen te.oracle.apps.icx.por.rcv.server.TeReceiveItemsTxnVO av typen Visningsdefinisjon
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1610)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2357)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:427)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:214)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(OAHttpSessionCookieImpl.java:473)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Fant ikke definisjonen te.oracle.apps.icx.por.rcv.server.TeReceiveItemsTxnVO av typen Visningsdefinisjon
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:329)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:269)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:649)
at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:369)
at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:494)
at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:673)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:369)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:135)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:76)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:1984)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:361)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1543)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2357)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:427)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:214)
at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(OAHttpSessionCookieImpl.java:473)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
Thanks for any helpCheck the file ReceiveItemsAM.xml for the reference to old VO. Also it would be great if you can provide the error details in English language :-)
--Shiv -
Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
I can consult Gateway; device drivers web sites; hardware drivers;
Please Email Deanallen@ a*l.com
< Email Edited By Host >Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support -
can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.
How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.
-
Hi Experts,
We are investigating if any SAP customer that implemented SAP APO PPDS has ever attempted to establish a "roll back" of the SAP APO PPDS created supply plan to a defined point before the start of the SAP APO PPDS planning batch run?
We have a situation where - in the middle of the planning batch run - randomly or intermittent the batch run hangs or runs a step for multiple hours that normally, at most days, takes only a few minutes to run. In a situation like this, the supply plan is not in a state where customer sales orders can be promised (using GATP CTP) or planned orders can be converted to production orders and published to SAP ECC, etc since the plan may be capacity infeasible or simply partial or incomplete. To not hold the business operations hostage to wait resuming operations (promise customer sales orders, convert and release and execute orders to transfer, deliver, produce, or purchase) for hours or days, we need to find a way back to the original plan right before the nightly PPDS batch planning job started.
We already close all the queues from ECC to APO, thus, no CIF traffic from ECC to APO. We also shut down the customer sales order feed into ECC as normal process for duration of the APO PPDS batch planning run. Thus, functionally, we are theoretically in a situation to simply go back to a PPDS and active planning version save prior to the run. Yet, many more technical and BASIS-related questions remain on how to roll back to a state where the plan was not compromised.
This inquiry is to learn if any other SAP customer has ever established a process to roll back SAP APO PPDS to a previous point in time supply plan to resume operations? Whatever the reasons are, be it after a failed batch run, or any time during the normal interactive plan day.
Additional information about our design and plan:
1. We have a two year horizon supply plan in PPDS
2. We only publish to ECC 14 days worth of planned orders, stock transfer requirements, and purchase requirements
3. We convert planned orders to production orders and release production orders in ECC 2 days before first operation starts
4. We convert PR's to PO's and STR's to STO's in ECC 2 days before execution (ship or submit to vendor)
Any indication where a SAP customer has developed and uses a process to roll back an SAP APO PPDS- planned supply plan to an earlier point in time or version would be helpful to know.
Regards,
Manimaran M.Hi Manimaran,
Saving in Simulation means in DS board when you click on save it provides you option to save sim version or adopt to active version. If you copy to inactive version you cannot copy back trasaction data specially PPDs orders back to active version again while if you save in simulation you can adope it to active version at any point of time. YOu can adopt simulation version changes to active version using T-code /SAPAPO/CDPSS0
Copying to active version means you copy data from version 000 to some other active version while here results are kept simulation, -
Install of PSE9 starts rolling back at shared technologies, and doesn't install at all
I am trying to install PSE9 on a small laptop which doesn't have a CD/DVD ROM Reader/Writer. So I copied the program to a pendrive and it appears to have the whole program on it. It goes through the first part of the install just fine and the icon appears on the desktop. It gets to "installing required shared technologies" and the next action shows "rolling back the installation of PSE9". At this time the PSE9 icon on the desktop, disappears, and the next heading says "rolling back the installation of PSE9 Organizer" Then the window comes up which says install shield wizard completed and, "the wizard was interrupted before PSE9 could be completely installed...below mentioned application has failed to install: SHARED TECHNOLOGIES. then I click on finish and there's nothing left of the install anywhere in the computer. This is frustrating and I'm sure that somethinbg gets left out when I download the program to the pendrive but I don't have any other way to do it unless it could be installed directly from Adobe. Can I do that?
first, make sure you have a complete installer:
if you follow all 7 steps, you can download the pse trial: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
use your serial to activate.
if you have dl problem, you didn't follow all 7 steps. -
Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'
Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan -
JTA transaction unexpectedly rolled back
I have a Spring Java web app deployed on OC4J 10.1.3.3 using Toplink as the container managed persistence. When my app is launched a named query is executed that uses JPQL to load up collections of objects. It is failing with the subject line exception.
org.springframework.transaction.UnexpectedRollbackException: JTA transaction unexpectedly rolled back (maybe due to a timeout); nested exception is javax.transaction.RollbackException: Timed out
If, however, I then modify the URL and force an action that will re-execute the same query, it works fine.
Any ideas on which configuration settings I should investigage/change to enable this to work the first time through?
I am not dealing with large collections here. At this point, there are 11 main objects that have children/parents. Re-execution of the query happens very fast.
Thank you!
GinniHello,
It sounds like its not the query itself that is taking too long, but all the processing done before the query in the same transaction scope. The error is that the transaction is timing out, so you should start by checking when the transaction is started and if the timeout value needs to be increased to cover the time this process is taking, or if the transaction can be made smaller or broken up into smaller peices. Or, if the query is just returning data that isn't going to be modified, if a transaction is required at all.
Best Regards,
Chris -
Data Services job rolling back Inserts but not Deletes or Updates
I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley -
Rolling back of Quick Pay Pre-payment and Quick Pay in case of void cheque
Hi All
I am facing an issue if you can help me out of if
Here is a scenario
a payroll manager runs the following processes.
1. Payroll run
2. Pre-Payments
3. Payroll Archiver
4. Payment Output file
After running all these process payroll manager finds that he also has to make an adhoc payment on account of car loan of AED 150,000.
So he runs following processes
1. Quick pay for Car loan
2. Quick pay pre-payments (payment made through check)
3. payroll archiver
4. Cheque Writer.
Now due to some technical fault, alignment on printing of cheque becomes disturbed there for cheque misprinted.
Payroll manager runs Void Cheque process to cancel the cheque.
After all these processes which has run successfully, order comes from upper management to rollback quickpay for adhoc payment of loan.
Now question is how it can be achieved.
I tried different things as follows
On Assignment Process results screen i queried the assignment which all the processes in descending order.
I tried to start roll back from cheque writer but system didn't allowed to do this because of check Void process.
I tried to start rollback from Magnetic report, system allowed to roll it back.
Then i tried to rollback Quick-pay prepayment, system did not allow me be do it. There fore i couldn't run rollback for Quick-pay.
There is an another thing i tried.
On "Assignment Process Result" screen i queried assignment. Then i delete the first entry of Void cheque by using delete option from menu bar on top and saved the record. then i delete cheque writer entry and saved the record. Then i run rollback for quick pay pre-payments and ran it successfully and then lastly i ran rollback for quick pay run.
One thing cautioned me that if I delete the void cheque entry then its history may be lost or have lost and on the other hand with out deleting void cheque i cannot proceed to rollback quick pay.
Kindly tell me the best way to run rollback for quick pay in this situation.
Regards
MajidBt do not provide broadband only so you need existing account holder to add broadband to phone account and then you can pay back the account holder - probably not what you want
the 12 months advance applies to the line rental not the broadband - as I said BT do not sell broadband only you buy a package which includes phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
Rolling back from OIM version 11g to 9.1.0.2
Experts,
OIM version upgrade from 9.1.0.2 to 11g(11.1.1.5) need to be rolled back due to some error.
Just wanted to know views of experts.
Following steps have been completed so far of the upgrade guide [http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm].
•Task 1: Identify and Prepare Oracle Database for Oracle Identity Manager 11g (Optional)
•Task 2: Use the Repository Creation Utility to Create the Schema in the Database
•Task 3: Install Oracle Fusion Middleware
•Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema
•Task 5: Create a WebLogic Domain for Oracle Identity Manager
•Task 6: Start the WebLogic Administration Server
•Task 7: Configure Oracle Identity Manager Server 11g
•Task 8: Configure Node Manager to Start Managed Servers
•Task 9: Start the SOA Managed Server
•Task 10: Start the Oracle Identity Manager Managed Server
•Task 11: Stop the Oracle Identity Manager Managed Server
Rollback strategy:-
1. Delete extra schemas(SOA MDC etc) created during Task2
2. Restoring the OIM DB schema (of version 9.1.0.2) from backup.
3. Updating back path and variables environment with old values
4. Starting the weblogic and OIM application from old Middleware_home and OIM_HOME.
Experts,
Above rollback strategy would be enough or should i take some other point in consideration.
If you can think of any other thing please share..
Thanks,
ManoharYes your strategies seems fine. for dropping schema you can RCU as well.
for restore, Drop all the entities manually from oim db schema So you don't have any grant issue while importing old 10g dump
--nayan -
While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
How do I modify the system.Hi Rgardezi,
The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
2) Perform a selective Start up using the steps mentioned in this link.
Please suggest if the above mentioned steps were able to resolve the query for you or not.
Cheers,
Kartikay Sharma -
Unable to use iTunes for about a month on my PC
Have PC with windows 7 (64)
Own an iPad2, which is working with no problems
When I try to install iTunes it repeatedly fails via "Roll back" Tells me to reinstall, which does not work.
Tried latest update iTunes 11, same problem
Prepared to uninstall iTunes and start all over again, but how do I do this?hi mate i think i may have just solved this for you. had the same problem as you, i uninstalled all apple products and quicktime and safari, did a disk clean up and deleted old restore points(might not need to but did it anyway) downloaded itunes from explorer and managed to install the new itunes 11 wooohooooo hope this helps buddy
-
PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...
Hi,
I need serious help,,,,,,any help is appreciated :
--- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
--- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
--- so tried to do restore, F11 showed there were no previous saving for restore
--- tried to do recovery , F11 showed that "restore" botton is gray/ inactive
--- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
--- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
--- so now it boots up and goes to useless recovery page
--- through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive" are all there!!!! and i can view them,,,,,,, ooops!!! my whole problem was changing windows group!!
--- so if i can just boot to previous windows , then i can change the group and access the files...but
--- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
--- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks! phewww),,,,,,,,,
i am panicked any help would be deeply appreciated.........................................................
HP Pavillion DV-7 4069
Windows 7 Home PremiumHi,
If you don't already have one, use another PC to create a Windows 7 Recovery CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD. Once created, or if you already have this, insert the CD and restart to boot from it. Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Contact with AP but no internet?
Subject say's it all. I have made contact with the AP but not the internet? any ideas?
-
Preloader for a slide presentation
I have created an online comic using the slide presentation method so that people can move forward and backward through the comic...however I am needing to upload this with a preloader at the beginning so people can see the progress of the download.
-
Is it possible to upload color groups from Illustrator CC?
Is there anyway to upload a color group from Illustrator to Adobe Cloud and have it appear as a Color Theme? I can only seem to upload individual colors. Alternatively, is it possible to group individual colors that have been uploaded into a Color Th
-
E-Rec 6.04 Search candidates who haven't released their profile.
Hi, We are on E-Rec 604. My client want could search candidates who haven't released their profile. I know that with the manual application option they could do it but they have an special recruitment process in wich there aren´t publications... The
-
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help