Fast switching for from back to front camera on tablets with two cameras..

just like the subject said.. we need this option...

If you restored to factory settings/new iPod and still have the problem then it is a hardware problem. 
I suspect that replacing the screen will not fix the camera problem unless the problem is due to a loose connection since replacing the screen could restore that connection.

Similar Messages

  • My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

    My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

    Abelynn-
    Does the problem occur in both Camera and Photo Booth Apps?  If you run the FaceTime App, does the front camera work?
    If the front camera never works, you may have a defective iPad.  If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
    If the front camera works for at least one App, try rebooting the iPad.  Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  After a couple of minutes, the iPad will restart.  Rebooting will not hurt anything, and may correct your problem.
    Fred

  • Paning in Audition From Back to Front

    Paning in audition is the great thing
    I tried to rotate pan and sound goes around you with all beauty
    But what if I want to pan from back to front or left from right ?

    with a MacPro or Windows, please ?

  • On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

    We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

    You did nothing wrong, but the photo app puts stuff in chronological order.
    You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

  • Working with two cams

    I have shots from two cams which I am preparing to capture into Adobe Premiere.
    I know there's a way to work with two cams-monitoring, but is it the case when capturing ?
    I am capturing via Firewire.  My card has more than one slot - so guess I can plug-in two cams at same time.  But can I A/B between the two cams prior to capture (record) into Adobe ?
    Or is the multiple cam into Adobe only for ''already captured'' shots ?
    Thanks,
    Rob

    You need to capture the data streams separately (not simultaneously)

  • I have a video made with two cameras, in two tracks. Sometimes only one camera is running (because t

    I have a video made with two cameras, in two tracks. Sometimes only one camera is running (because they both turn off at certain clip lengths). I'm trying to cut them together using the multicamera window, but I get no audio from track 2. How can I get audio from track 2. (My kludge is to cut the original audio from track 2 and move it into track 1.)

    Good Grief!  Now that I know the answer, I can find it all over the place.  But before, I got so many google references that just told me it couldn't be done!  That made me think the answer must be obscure -- when it was really simple, and should have been obvious to me.
    The lesson seems to be: do more work looking around the panels and menus of the program itself before trying to look in "help" or "google".
    Thanks, again, Jerry, for your consideration.

  • Can i shoot tethered with two cameras?

    I've read that I can shoot tethered with two cameras in Adobe Photoshop Lightroom. When I tether them to my iMac 27", one will work. Then I switch cameras in the "shooting module" to the other body (both bodies are Nikon D800) and then it freezes up. Do they need to be named differently? Is that even possible. Your help is greatly appreciated.

    Canon supports two camera attachment for tethering.
    Nikon does not.
    Tethered camera support in Lightroom
    Notes on Nikon cameras
    For all Nikon cameras:
    If you trigger the shutter with the tether bar capture button, the image must finish downloading before another photo can be captured. Triggering a capture with the shutter release button on the camera does not have this limitation.
    Images do not save to the compact flash card. They are only downloaded to the computer.
    Only one Nikon camera can be attached at a time.

  • What cameras  are compatible with the camera connection kit

    what cameras are compatible with the camera connection kit and ipad2

    I also recently bought the camera kit and found that it worked fine as long as you don't format the SD card using PC. Once I re-formatted using my camera I could once again upload my photos. that was until I switched formats to Adobe RAW, it seemed unable to upload again. So I switched to S RAW and that worked fine. Sometimes my kit won't upload photos but I find that by just re-inserting the card it works fine.
    Haven't tried video yet, but I recently learned that the devices are quit sensitive to the "Format"(that needs to be FAT32, or exFAT- but in this instance it needs to be formatted by a Mac).
    Good luck

  • Acquire with two camera's to one image??

    Here is my configuration:
    Windows 2000
    PII 866
    512mb ram
    1) Imaq PCI-1409
    1) Imaq-A6822
    2) JAI CV-M50 camera's
    2) Pentex C60607 lens'
    I would like to snap an image with both cameras and combine the two to make one image. The part will not be moving and time is not critical. The camera's will be mounted 3.8' above the part which will give me about a 3' square area for each camera. So basically I would like to end up with one image approx. 3' X 6'. How is the best way to go about doing this? Or is it even possible?

    It all depends on how accurately you want the images to be joined.
    If you just want to display them as a single image, it is very easy. IMAQ ImageToImage will paste one image into another.
    If you want to seamlessly join them together, and do it accurately enough for measurements or feature detection, it is a lot more difficult. It is impossible to rotate and align the cameras so that two images can be pasted together accurately without manipulation of the images. You will need some mapping tools and figure out how to rotate and align the second image with the first. You will need a small portion of the images to overlap so they can be matched up. You may need to map both images to eliminate distortion first. If your part has a noticeable thickness
    variations, you will get different perspectives for the two images.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • How can I change printing preferences from "back to front" to "front to back".

    I've checked 'advanced' preferences and "front to back" is checked but that is not how it prints and I can't seem to change it.

    You have to upgrade to 10.6.8 to be able to download  10.7 Lion. The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Different sound quality from back and front panels

    I posted https://forum-en.msi.com/index.php?topic=112384.0
    but no one answered
    Well, I have another related problem and a question:
    1. Why does sound differ if I plug my headphones into the back panel jack from that I get from my front panel jack?
    2. Is this by design?
    3. Can I change it (make sound from front like that from the rear)? How?
    4. Is this influenced by Windows Sound settings (speakers > advanced > headphones or speakers)? Could you please give more info on these settings (I could not find that anywhere!)
    The major problem is that my phones sound too twittery, almost no bass, whereas the speakers plugged into the rear jack are OK. Please help!
    My Windows is not English, so some names may be incorrect, sorry
    I have WinXP Pro, MSI P965 Neo-F, Realtek ALC883
    I tried Technics RP-F500 and AKG K-44 headphones, they both sound alike
    I mostly listen to mp3s

    hmm.. I do not aware of this, is this very significant?
    I think you should check with MSI. goto MSI support site and post your problem.
    By the way, don't forget to read the moan guide, the link is in my signature.

  • Does anyone know if MOV or MP4 files from the JVC GY-HM150U will work with the Camera Connection Kit and then be readable by iMovie or similar apps?

    The JVC GY-HM150U camera and others in it's line say they offer recording in two different formats:
    Native .MOV format
    Fastest HD shoot to edit workflow. Edit immediately on Final Cut Pro™ or Premiere™ without conversion or transcoding
    Native .MP4(XDCAM-EX™) format
    Native File Recording
    Because it uses QuickTime™ as its native file format, the GY-HM150U is the perfect choice for users of Apple's Final Cut Pro™ editing system. Both HD and SD MOV files recorded by the camcorder can be dropped directly into Final Cut Pro™, keeping them first-generation and eliminating the time-consuming process of file conversion.For users of all major NLE systems, including solutions from Adobe, Avid, Grass Valley, Vegas and Apple, the GY-HM150U supports the MP4 file format, which can be brought into your editing system without re-encoding.
    HD VIDEO RECORDING
    Recording media
    SDHC (Class 6/10), SDXC Slots: x 2
    Video recording
    Video codec: MPEG2 Long GOP
    QuickTime™ File Format for Final Cut Pro™ (HD/SD)/
    MP4 File Format (HD)/AVI type-2 File Format (SD)
    Recording mode
    HQ mode: VBR, 35 Mbps (Max) MPEG-2 MP@HL
    SP mode: CBR, 25 Mbps (1440 x 1080i)/
    19 Mbps (1280 x 720p24/25/30): MPEG-2 MP@H-14
    19 Mbps (1280 x 720p50/60): MPEG-2 MP@HL
    SD Video: DV compression 4:1:1, 8-bit, 25Mbps
    Audio: LPCM 2ch, 48 kHz/16bit
    Video frame rate
    NTSC settings:
    HQ mode: 1920 x 1080/59.94i, 29.97p, 23.98p, 1440 x 1080/59.94i,
    1280 x 720/59.94p, 29.97p, 23.98p
    SP mode: 1440 x 1080/59.94i, 1280 x 720/59.94p, 29.97p, 23.98p
    SD mode: 720 x 480/59.94i
    PAL settings:
    HQ mode: 1920 x 1080/50i, 25p, 1440 x 1080/50i, 1280 x 720/50p, 25p
    SP mode: 1440 x 1080/50i, 1280 x 720/50p, 25p
    Audio recording
    LPCM 2ch, 48kHz/16-bit(Internal stereo mic/External mic input)
    and the files recorded to folders labeled "CQAV" (.MOV) or "BPAV" (.MP4), respectively, located in /PRIVATE/JVC/ off the root.
    So will the Camera Connection Kit see them properly and transfer them over to Photos, and then will iMovie be able to handle them? Or is the CCK restricted to only formats derived from DSLR cameras with "DCIM" folders, as I have heard?
    Any knowledge, especially first hand testing, would be greatly appreciated!
    Thanks,
    David
    Message was edited by: dwoodworth
    Changes made to correct the recorded file paths.

    Excuse the late post but just wondering if you came up with a solution for this problem? I experienced the exact same issue but copying the movies from Aperture into iTunes (which worked) still didn't allow them to be played on the iPad. As they had played faultlessly when imported directly from the camera connection kit!

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • I use iTunes Radio via AppleTV - after I've been connected and listening for a few minutes, the TV will sych with the camera roll on my daugter's iTouch (but the music keeps playing).  How do I prevent this?

    I use iTunes Radio via AppleTV - after I've been connected and listening a few minutes, the TV will snych with my daughter's iTouch camera roll (but the music will keep playing)?  How do I prevent this?

    How do I prevent this?
    Set a password or onscreen code for Airplay to the Apple TV:
    Settings > AirPlay > Onscreen Code > On
    Settings > AirPlay > Password > [set password]
    http://support.apple.com/kb/ht5517

  • Please help! Will any of these camera's work with VC3 Camera Requirements?

    I am looking to do news broadcasts for my website. I was looking into Panasonic GS-500, GOOD CAMERA, discontinued. I don't like the GS320 as it doesn't include a mic or headphone input. So I have no choice but to spendaround a thousand dollars for a 3CCD or CMOS camera that can shoot good broadcast web news segments.
    I have narrowed my choice to three camera's that have mic, firewire, essential for VC3 but I can't decide. I don't know if they are compatibile with the software, need help from the experts.
    This is requirement from the adobe website:
    ******What types of cameras can I use with Visual Communicator?*******
    Visual Communicator works with standard webcams and camcorders. Most camcorders will require some kind of video input card such as a FireWire (IEEE 1394) card or an analog capture card. Whether you are using a webcam or camcorder, it's important that the camera or input card has a Windows®driver that is DirectShow compatible. Most of them do. If your device is older, you might need to visit the manufacturer's website to download a new driver that is DirectShow compatible. Inside Visual Communicator you will find a menu that lists all of the DirectShow devices attached to your computer, and you can select which one you wish to use for your video input. If you have an analog video capture card, you can also hook up your VCR and use recorded footage.*********
    Could you please read the specs and let me know if they will work with VC3:
    ******JVC - 2.0MP High-Definition Digital Camcorder Model: GZHD3US
    http://www.bestbuy.com/site/olspage.jsp?skuId=8464306&productCategoryId=abcat0403004&type= product&tab=2&id=1184768163867#productdetail
    ******JVC - 2.1MP High-Definition Digital Camcorder
    Model: GZHD7US
    http://www.bestbuy.com/site/olspage.jsp?skuId=8225066&productCategoryId=abcat0403004&type= product&tab=2&id=1166840341098#productdetail
    *******Canon - High-Definition MiniDV Camcorder
    Model: HV20
    http://www.bestbuy.com/site/olspage.jsp?skuId=8220061&productCategoryId=abcat0403004&type= product&tab=2&id=1166236338024#productdetail

    yes, change the output settings from HD to DV and it'll works smoothly.
    http://LittonDSD.om
    http://SoftwarEdge.com
    http://TrendsHub.com
    http://Patheo.org
    http://Quickfit30.com
    http://BizNetWorld.com
    http://UltraAs.com
    http://GenieLab.com
    http://ISSSA.org
    http://Porkepik.com

Maybe you are looking for