Faster wi-fi freezes laptop?

I recently upgraded my internet to fibre broadband, going from roughly 2 Mbps to 25 Mbps. Whenever my MacBook Pro is connected to the new internet it freezes after 30 seconds and won't let me open or close programs. The MacBook is only just over three years old and everything else on it works fine.  It works perfectly on other wi-fi connections or with airport turned off. Any help would be greatly appreciated, thanks.

Hi Jim,
Thank you so much for your response and advice.
I have rebooted my wireless router as you instructed and my iPad now seems to be working ok with the wireless connection.
I know it would have seemed an obvious thing to try, but I did test the wireless router with both my wife and my mobile phones, and they both worked perfectly and uninterrupted connection, so I assumed that it must be the iPad at fault.
I guess the configuration of the iPad wi-fi must be completely different to that of our HTC phones, and hence threw the glitch.
Anyway all is fine now, for the time being.
Thank you so much for your help. I only wish I had posted my request for help yesterday, and saved hours of messing around and numerous restoration attempts.
Best wishes
Kevin,
A happy Brit, across the pond in the UK.
p.s. This message was sent via my iPad !!!  Ha ha

Similar Messages

  • My computer is taking forever to boot up and when it finally does it starts running fast and then freezes...

    My computer is taking forever to boot up and when it finally does it starts running fast and then freezes...I have cleaned out and backed up files, as well as utilitzed Mac Keeper...Do I need to upgrade to Mountain Lion. or download new firmware?

    Uninstall MacKeeper, it's crap.
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    When that's done, then run through the Steps and tune up your machine.
    ..Step by Step to fix your Mac

  • Mac OS X 10.5.6 Fast User Switching Freezes Screen

    The past two Mac OS X versions (10.5.5 and 10.5.6) result in the screen freezing after initiating Fast User Switching. Version 10.5.4 worked as designed, but 10.5.3 had the same issue. Seems to be video display related. Using a 20" display does not result in the screen freezing. Has anyone else had this issue or have any fix suggestions?

    The past two Mac OS X versions (10.5.5 and 10.5.6) result in the screen freezing after initiating Fast User Switching. Version 10.5.4 worked as designed, but 10.5.3 had the same issue. Seems to be video display related. Using a 20" display does not result in the screen freezing. Has anyone else had this issue or have any fix suggestions?

  • Videos jump to fast-forward or freezes

    Videos playing with adobe jump to fast-forward in some cases and in others they just freeze at a certain point and cannot be restarted except in replay.
    The screen turns all green in the cases of the ff.
    This is on both G-Crome and IE. although with slightly different results on each browser.

    Mike , I followed through with this and ran an update for AMD Radeon HD 750
    driver. ( this was under 'Diplay adapters')   No change.
    I also ran an update for the IDT High Definition Audio CODEC. (in 'Sound
    video and game controllers' ) No change
    Might there be other video drivers affecting this and how can I identify
    them if there are.
    Thanx

  • Photoshop CS6 freezes laptop when installing

    Hello my  hp laptop keeps freezing when I'm installing photoshop. It comes halfway and then to the point where I can't even move my cursor and have to turn off my computer. This has happened several times, and I don't know whats causing this. I have a windows 7 computer, please help me.

    Filelr I would recommend reviewing your installation log files to determine the exact error which you are receiving.  You can find details on how to locate and interpret the log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Fast User Switching Freeze

    My wife's Macbook has been having a problem for the past couple of months. If she attempts to switch users (away from my son's account) using the fast user switching, the screen goes blue and just seems to hang there. She usually just forces it to shutdown and restart. She has noticed that she can switch to the login window, then select her account, and all works well.
    Has anyone else experienced this? Any fixes out there? Google has not revealed anything on this.

    Have same problem now with my iMac -- when I had it in the past, it was due to account privilege issues -- if one of the accounts did not have admin privileges, but another did, system was prone to freezing. I suspect permission problems. I'm not sure this is the current problem on my machine; problem does not occur if I log out of one account before switching back to the first account.
    Try making all accounts admin & see what happens...

  • Flash in Firefox freezes laptop

    About 30 seconds to 1 minute into flash videos my laptop will completely freeze up. Only thing that works is the power button.
    Happens in Hulu, NHL.com, ABC.com, YouTube, etc.
    I'm running a P4 with XP Home SP3.
    Current on all updates on XP, Firefox & Flash.
    Removed Flash with downloaded Uninstaller.  Shut down A/V & Firewall. Reinstalled Flash.  Same problems. Can see Adobe flash installed page OK.

    Hi Tony, if I may interrupt for a moment. Check your add ons(all add ons) for IE for Shockwave Flash Object, it should be Flash10e.ocx (version 10.0.45.2) and Enabled.
    With Firefox, check plug-ins for SWF version 10.0.45.2 and make sure that is Enabled.
    If that doesn't correct the problem, then post back and we'll check your Flash files to make sure they are correct. Also if there are any ActiveX Controls that the A/V may have in the add ons that could be conflicting with the browsers.
    Thanks,
    eidnolb

  • L355D S7901/video editing freezes laptop

    I cannot get my pinnacle editing software to run properly (freezes)...this model has more power than the software calls for...it runs slow and/or freezes up etc. also some vids won't go to fullscreen, goes black but still have audio??????...

    Satellite L355D-S7901 
    You don't say which Pinnacle software.
    In any case, it's best to consult with Pinnacle's tech support.
    Make sure the program is compatible with Windows Vista.
    -Jerry

  • Sluggish, freezing laptop

    My macbook has recently become extremely sluggish and frequently freezes. Certain tasks like empyting the trash are not working. Also, internet browsers are working strangely. Firefox requires a security exception for each new page visited (site not trusted), and Safari loads text wersions of web content. One interesting nugget, a recent attempt to download Google Chrome(to see what would happen witha different browser) prompted a command to change all default browser settings to something like searchmac.com
    I would appreciate any thoughts on fixes. Can it be done by a layman such as myself? This puppy was purchased in 2009. Is it even worth fixing?

    a recent attempt to download Google Chrome(to see what would happen witha different browser) prompted a command to change all default browser settings to something like searchmac.com
    It's possible malware was installed on your Mac (Genieo)
    Follow removal instructions here > Remove Genieo(InstallMac) on Mac | Fix-KB

  • Laptop freeze when no pressure

    Hi,
    I have a strange problem on a M60-CD4 laptop (I know, that laptop model number is strange too!): when I dont push on the casing or the screen, the laptop freeze and if I "repush" on it, it's "unfreezing" at the same place.  No error, no blue screen, only freezing laptop ?!?  Sometimes when I'm lucky, I place the screen in a position that the laptop work no problem but I'm not so lucky!
    Any idea ?  Broken motherboard maybe ?!?  Any other idea ?  Is there service manual where I can find the way to open it correctly to view component ?
    Thanks a lot!

    I am desesperate. The Datasocket - OK version.vi 19 KB that seemed to work so well (no freeze at all) creates a huge memory leakage as you can see in the attached file. I am only reading a tag (local OPC tag, not even remote tag on another PC's OPC server) and the word document attached shows the issue:
    After 15-20min during which no increase of memory is noticed (first picture) the situation starts to worsen. In 12 hours (about 7200 read operations) it reaches a consumption of 65Mb ! (to read everytime the same OPC tag). Something that I never noticed with the Datasocket - NOK version.vi 19 KB that had the freezing issue...
    I really do not know what to do.
    Thanks for your prompt feedback
    Christophe
    Attachments:
    Benchmark Datasokets.vi ‏38 KB
    Benchmark Datasocket Memory Consumption.doc ‏392 KB

  • Why does itunes freeze up windows/PC but work fine on mac?

    Yes itunes is apple but why make it so bad on PC and fine on mac? not everyone has the money for mac. And school wise windows is much easier than mac. One of my friends is stupid enough to rely on pages for everything but when we need to use excel or publisher she cant figure out how to do things so she either goes to the library in precious sleep time before school, or during lunch and recess, etc; OR she uses my laptop before school which I find quite annoying moving it from my morning mess down to another room. Seriously if Apple is trying to get more people to buy macs ITS NOT F*CKING WORKING!!!! It's just making me ****** at having to wait 10 hours and lose most of my sleep trying to do a recovery of my ipod coz it took too long to sync and kept stuffing up my laptop. And now i cant have any decent games because it will freeze up my perfectly fast and relativly new laptop (few months old). This also happens on all other windows in my household and my friends also complain. BTW I am not a noob. I'm actually really good with technology and gaming though my appearance suggests otherwise.

    Around these parts - yes resync is a word.
    The waiting icons are appearing in the iPad correct? If so, finish the downloads in iTunes on your computer and then try to sync the apps. Don't connect the iPad when you do this - just try to finish the downloads in iTunes.
    Where can you see your music? In the music app itself on the iPad?

  • Laptop crashes when ac power cord is plugged in or removed

    i have a dell inspiron duo 1090.  whenever i plug in, or remove the power cord the system crashes.  it appears as though it kills xorg or xserver or whatever in the process.  basically the screen goes to terminal and it sends a bunch of text really fast, and then freezes.  i'm not sure how to get the message as the computer is frozen at the time...or if it would be helpful.  if anyone has experienced this or has any ideas i'd be really happy to get this taken care of.  thanks!

    @boohoomill:  i've been trying to recreate the crash to check the logs.  strangely i haven't been able to.  i suppose that's good, for now.  i'll post the logs if i can get the system to crash again.  it's really weird that it did that EVERY time i plugged in or unplugged the ac power cord....until i wanted to check the logs.
    @ewaller:  I am using Gnome, i have not installed acpid, laptop-tools though, or any other type of laptop power saving stuff like cpu frequency scaling.  i suppose that i have the basic power management package that comes with gnome.....at least i think that it belongs to gnome.

  • Phone and contacts app freezes, becomes slow and scrolling is jittery

    My setup:
    iPhone 4 with iOS 4.2.1 (8C148)
    I don't have 3G on my CIM (provider BASE.BE), I can only use WiFi to connect to internet. 
    I sync my gmail contact (mail and calendar are turned off) through the iPhone built in Exchange account connector.
    Fetch new data is off, push is off, fetch set to manually, advanced schedule set to manual.   
    I only turn WiFi on once a day, when I'm home, sync contacts and then I turn WiFi off again.
    Spotlight search is turned off.
    Device runs fine, battery life is great (much better than my iPhone 3Gs), I have about 2700 contacts, no duplicates, updates in both directions, everything working perfectly.
    Then without any warning, or even without any use of the phone, this happens: 
    1) The phone and contacts app becomes unresponsive for a few seconds, remains very slow, scrolling becomes jittery or freezes.  When the symptom occurs both apps have this issue.  I assume because both use contacts.  Both apps don't crash, they just get very slow as if they were trying to do something heavy. This does not happen with any particular event, like getting a call or text message. This can happen even at night without any missed calls or text messages send or received.  The symptom does not affect any other app.  For example when I open the iPod app, scrolling though the long list of music is fast, without any freezing or jittery behavior, while the Phone and Contacts app is still very slow.  The problem does not go away by itself.  Hard rebooting the phone does not help.  I assume the problem is not related to any purchased apps because this can happen when none of them are running.
    2) The phone gets really hot.
    3) The battery drains very fast.  I can go from 100% to 0% in under 30 minutes.
    4) CPU usage (use System App to measure) goes from < 20% to >75% or more.
    I notice the symptom mostly when in the 1) phone app, or 2) I feel the phone heat up or 3) in the morning when the phone battery is almost empty when it was full the night before.
    I can fix the problem by 1) turning on WiFi, opening the contacts app.  Then I see the circular indicator in the top left hand corner turning round.  This takes just a few seconds, to sync 1 or 2 contacts en when the indicator disappears, the problem is gone.  Scrolling is fast again.  Problem fixed.  It can take a day or two and the problem comes back.  Do sync trick again and problem gone again, and so on...
    I can also fix the issue by 2) deleting my gmail exchange account, putting it back and syncing everything back.  But like with solution 1) the problem will just returns after a few days.
    I have even tried a full factory reset and manually putting all my apps back.  But again, when I import my gmail contacts, wait a few days and problem returns. 
    I've been having this issue for a few months now and have done quit some research on the subject.  I'm pretty sure I also had the issue on iOS 4.1 and possibly also 4.0.  I did not have the issue in iOS3.  I had the same problem on my iPhone 3Gs which Apple replaced.  I thought the battery was dying.  Now I bought an iPhone 4, same problem. 
    I purchased many system monitor apps to find out what process was causing the problem.  The problem is that none of the apps I found report CPU or memory consumption per individual process.  So I only know CPU goes from below 20 to 75% and more, but I can't pinpoint which app or process is doing the extra consumption.  But it has to be one the standard built in iOS processes.  I can see when what process started.  And when the issue happens, I can hard reset and don't launch anything, and the problem is still there.
    When iPhone apps crash and you connect your phone via iTunes the crash reports are put on your computer.  I found these logs but because the contact and phone app don't crash I have found nothing interesting there. 
    I have not found a way to trigger the problem on purpose.  I tried adding, changing deleting contact on my iPhone, none of these actions trigger the issue.  The problem just appears at random.  
    I have also not found a way NOT to have the issue.  I've tried not changing any contacts for a few days, but the problem still creeps up. 
    I have read dozens of threads on the internet and only this one comes close:
    http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=62b2355d61d8e11 c&hl=en
    I also found this interesting:
    http://discussions.apple.com/thread.jspa?threadID=2567976
    <Edited by Host>

    I solved this problem by restoring my phone to factory setting. I dint find any solution to this problem. Now instead of using "Google Sync" i use iTunes contact sync which does the same thing.
    The key is not to use "Google Sync" when you restore your iPhone. Follow these steps:
    1. Take back up of everything. Sync your contacts so your gmail has latest contacts.
    2. Restore your iPhone. And set it as new iPhone instead of reloading everything from previous backup.
    3. Sync everything using iTunes.
    4. For contacts go to Info -> Sync Contact with -> you can set up gmail here and it will load all gmail contacts to your iPhone.
    My iPhone is working perfectly after this. I hope it works on your too.

  • New Mac Pro (late 2013) crashes / freezes while rendering or editing in Premiere Pro CC

    We recently purchased a new Mac Pro desktop (Late 2013, 16GB memory, D700 Graphic Card, 2.7 GHz -12 Core, OSX 10.9.3) and we are running Adobe CC on it. When using Premiere Pro CC (7.2.2) I am having major issues while rendering and editing. About 50% of the time when I try to render it starts off real fast then just freezes. This happens in Premiere and Media Encoder. Sometimes I can just Force Quit Premiere or Media Encoder and other times I have to do a hard restart on the entire computer because the entire computer freezes. The computer will also occasionally freeze whenever doing simple editing or stacking layers. The  computer will also just decide to suddenly stop and restart when editing or doing simple tasks like browsing the web. Additionally there has been several times if the render does finish, the final video will have digital glitches throughout the video. I have to redo the render once or twice and it will finally be fine. This all is happening several times a day. This never happened on our previous Mac Pro, but we were not running Mavericks. I used Migration Assistant to transfer from old computer to new computer. So I don't know if this is an a problem with the actual Mac Pro, Mavericks, graphic card or Adobe? But right now I am very frustrated as you can imaging spending all this money for a computer that has been giving us more issues than our previous computer. Any help would be greatly appreciated!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • 6735s.Fail​ed Charger, Now Battery Playing Up? Laptop Wont Boot with Charger Plugged in!

    Hi,
    I have a HP Compaq 6735s and have owned it for around 2 years.The OS is windows 7 Ultimate, I have the installation CD.
    The other week my charger for the laptop broke, and I ordered a new one from Amazon. The charger was advertised as an orginal/genuine HP charger (although I doubt it is).
    As soon as I got the charger, I put my laptop on charge, The orange light around the charging socket came on to indicate it was charging. I leave it half hour to an hour and try to turn on the laptop. All i get is the fan on and nothing else, I pulled out the charger for a split second and the laptop boots fine. However, I left the laptop on charge overnight, and it gained only 9% charge!
    When the laptop is on, and plugged in, the fan is on. As soon as I unplug the charger, the fan turns off. When the charger is unplugged, the ring around the charging socket will flash orange, and the battery will decrease very fast! Once the laptop has been powered on, and the charger unplugged, if it gets plugged in again, it doesnt charge, it just says "plugged in, not charging".
    This is very frustating, and it makes me want to not use the laptop, which is not an option, as I need it.
    Hopefully someone can help me!
    Thanks in advance,
    Matt

    mattmanwrx wrote:
    Hi,
    I have a HP Compaq 6735s and have owned it for around 2 years.The OS is windows 7 Ultimate, I have the installation CD.
    The other week my charger for the laptop broke, and I ordered a new one from Amazon. The charger was advertised as an orginal/genuine HP charger (although I doubt it is).
    As soon as I got the charger, I put my laptop on charge, The orange light around the charging socket came on to indicate it was charging. I leave it half hour to an hour and try to turn on the laptop. All i get is the fan on and nothing else, I pulled out the charger for a split second and the laptop boots fine. However, I left the laptop on charge overnight, and it gained only 9% charge!
    When the laptop is on, and plugged in, the fan is on. As soon as I unplug the charger, the fan turns off. When the charger is unplugged, the ring around the charging socket will flash orange, and the battery will decrease very fast! Once the laptop has been powered on, and the charger unplugged, if it gets plugged in again, it doesnt charge, it just says "plugged in, not charging".
    This is very frustating, and it makes me want to not use the laptop, which is not an option, as I need it.
    Hopefully someone can help me!
    Thanks in advance,
    Matt
    Here is a link to your notebook's support portal. Use the troubleshooting in the solve a problem section.
    Did you ever calibrate your battery?
    Chances are that your battery is no longer serviceable. Two to three years is a reasonable amount of service life for a Lion battery if it was never calibrated and/or has been left plugged in for extended periods of time. A battery that will not charge beyond 9% probably has issues.
    Use the HP Support assistant to perform a battery status check. Also consider calibrating your battery. Calibration  resets the 100% to the maximum actual battery capacity.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for