Fastest and easiest way to drop a tablespace with LOB Segments

When I try to drop a tablespace I get a message that I can't cause it still contains LOB Segments. I searched to see what objects like tables or indexes are in that tablespace and there are none.
Any one run into this? Any way to get around this issue?

Sorry,
Version = 10.2.0.4
OS = Win2003 32bit
Command used = DROP TABLESPACE IWORKS_LARGE_TABLES INCLUDING CONTENTS AND DATAFILES;
Error Message = ORA-22868: table with LOBs contains segments in different tablespaces
Objects currently in this tablespace:
SQL> select s.segment_name, s.segment_type
2    from dba_segments s
3   where tablespace_name = 'IWORKS_LARGE_TABLES'
4 ;
SEGMENT_NAME                                                                     SEGMENT_TYPE
SYS_IL0000060885C00008$$                                                         LOBINDEX
SYS_LOB0000060885C00008$$                                                        LOBSEGMENT
SYS_IL0000060918C00048$$                                                         LOBINDEX
SYS_LOB0000060918C00048$$                                                        LOBSEGMENTI basically want to drop the whole tablespace but these objects are not allowing me to.

Similar Messages

HT1338 I am trying (without success) to design an organization chart on Diagram Painter, please advise fastest and easiest way to complete this task?

I am trying (without success) to design an organization chart on Diagram Painter, please advise fastest and easiest way to complete this task?

Purchasing an app from the App Store does not mean that Apple's forums are the right place to ask questions about it. Asking about it here is roughly similar to asking another customer at Wal-mart how to assemble the bicycle you bought there. Ask the company that created the app, using the link Bob gave you.

Fastest and easiest way to transfer system & files G3 to G5

I have a G3 b&W with a 400 firewire card in it, and two basic ATA hard drives. Which would be easiest way to transfer 10.3.9 system (with classic) by means of Carbon Copy Cloner, and all files to a partition on the G5 Mac.
Since the G5 has 400 & 800 firewire, or ethernet transfer.
I think Migration Assistant will help with the transfer, but not sure wich way to go about this.
Berry

Hi Berry, to use CCC you need an older version for 10.3, version 2.3, because the B&W doesn't support FWTDM.
Put the G5 in FW Target Mode…
http://docs.info.apple.com/article.html?artnum=58583
Wait for the G5's HD to show up on B&W.
But, if perchance it's just Classic you need, you can Simply copy OS9's "System Folder" & "Applications OS9" over.

What is the best and easiest way to speed up a Mac-MINI?

What is the best and easiest way to speed up a Mac Mini without adding memory?

I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
RAM specs: 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
This should be your Mini -- check other indicators to be sure:
http://www.ifixit.com/Device/Mac_Mini_Model_A1283
A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
Good luck & happy computing!

100% Cheapest and easiest way to Charge iPhone 3G in your car - Works

OK So i have spent a long time in these forums, and other forums, looking for a way to charge the iPhone 3G in my car. There have been lots of posts explaining why current chargers wont work and because of the firewire pins being removed etc, yet noone has posted the cheapest, quickest and easiest way to combat this problem.
All you have to do is puirchase the following item for £6, there may be a store right by you, plus your existing charger cable into the outlet (because your existing charger cable has the correct pin configuration) and it will charge straight away.
http://www.maplin.co.uk/Module.aspx?ModuleNo=99487&criteria=car%20charger%20usb& doy=3m8
Or search for item A66GA on www.maplin.com if the link doesnt work
Its cheap, easy, works, (i know this because i bought one) and it wont burn a hole in your pocket.
This unit puts out exactly the correct requirment for the iPhone 3G to charge, 5v at 1000mAh. This is what is written on the box, ignore the FAQ response on the site.
The only problem is you have to take your cable with you if you need to charge in the house, but im sure you can buy a spare cable somewhere quite easily because if you broke yours for example, you wouldnt be able to charge at all would you? and although Apple arnt the best im sure they would understand they need to offer speare cables.
Hope this solves the issues people are having.
Cheers,

You can't beat this deal. Buy this:
http://www.monoprice.com/products/product.asp?cid=108&cp_id=10826&cs_id=1082602&pid=3523&seq=1&format=2#description
and this:
http://www.monoprice.com/products/product.asp?cid=108&cp_id=10831&cs_id=1083101&pid=2732&seq=1&format=2
monoprice is by far the way to go for accessories. Screen protector is dirt cheap as well.

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG filesZ?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

The quickest way and easiest way to answering a call?

Hi, can someone give me some tips for the quickest way and easiest way to anwering the call without having to unlock the phone and key in the passcode (well i set up the passcode on my phone). Thank you

To answer a call when the phone is locked and the passcode is enabled, you don't have to enter the passcode, just slide to answer.

I own a MacBook Pro. Can someone advise me the easiest way to make a movie with existing photos on my laptop?

I own a MacBook Pro. Can someone advise me the easiest way to make a movie with existing photos on my laptop? I have made some movies on this laptop but find it too cumbersome. Thanks.

Hi sato gato,
The page linked below serves as a good starting point for creating slideshows in iPhoto.
iPhoto Help - Make a slideshow
http://help.apple.com/iphoto/mac/9.6/#/pht5470fe9b
Regards,
Allen

Easier and better ways to solve current problems with Acrobat?

Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
Marc

Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Best and easiest way to Overclock?

Been thinking lately about power management for my phone, with regard to saving the battery when I am not using much, and then maybe getting a bit more oomph when I need it.
What's the best way to achieve this, preferably with a GUI instead of X Terminal and SUDO rights (still a little scared of that one)?
I've installed a few Kernel things and CPU Freq apps too, but I am not sure which is the best and the easiest to implement.
Any help would be greatly appreciated...
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

richwhite wrote:
Ceroreoberts: when a new kernel is released is it auto updated? I had no update flashing in the status bar about it. And if we have to update/download manually does it affect our settings or seamlessly integrate in the background?
CPUFreq widget isn't actually meant to drop to 125. I spoke to the developer about it and he thought it was strange mine was at 125 and said it was because i was using a custom kernel, then he updated it and asked me if it still went that low, which it did. Anyway, it always dispalyed 125 but Conky showed it at 250, so i wonder if it just tells 125 on a custom kernel but actually doesn't change the minimum freq
the kernel should autopopulate, though this latest update installed seperately and still left the previous one there with a note to uninstall it.
this is probably because i believe he included thedrives for the fcam support to be integrated in this build rather then a seperate install.
but normally, it does it automatically.
i use xterm alot and just do a quick apt-get upgrade from time to time to check what has been done.
you can also do an apt-get update in xterm and it will update your repos.
as for the cpufreq.....there are two different ones...named very close.
i have both installed.
the first one is cpufrequi.
this one is a drop-down type that i use mostly. and i am not sure, as it doesnt show it, that it auto-drops the low to 125mhz. but conky confirms that. (this may also be because i have both installed)
the other is qcpufreq.
this one has a slider that you can change the high freq from 125mhz-1150mhz. but it actually shows you that the low is automatically 125mhz.
this low freq is most likely because of the kernel i am using, which is very stable, and anyone can install it from the repos as stated above. it is the one that i use.
NOTE- though, i have been forgetting to actually OC my device lately because the black plastic theme is just awesome and fast, especially combined with the custom transitions settings applications all set to 10.

Cannot drop undo tablespace with Active extents but no active sessions

Hi all,
I am running on 10gr2 oracle database in a Linux 32 bit environment.
I have a corrupted undo datafile. I've been able to recover the datafile but still the alert logs is still showing that it is corrupted.
Now what I'm trying to do is to drop the old undo tablespace like the one discussed here Change undo tablespace in Oracle - Switch Oracle's Undo tablespace.
My problem is I have an Active extent but no active session corresponding to it:
SYS@ccasdb AS SYSDBA > SELECT a.name,b.status
FROM   v$rollname a,v$rollstat b
WHERE a.usn = b.usn
AND    a.name IN (
                  SELECT segment_name
                  FROM dba_segments
                  WHERE tablespace_name = 'UNDOTBS1'
                 ); 2    3    4    5    6    7    8
NAME                           STATUS
_SYSSMU18$                     PENDING OFFLINE
SYS@ccasdb AS SYSDBA > SELECT a.name,b.status , d.username , d.sid , d.serial#
2 FROM   v$rollname a,v$rollstat b, v$transaction c , v$session d
3 WHERE a.usn = b.usn
4 AND    a.usn = c.xidusn
5 AND    c.ses_addr = d.saddr
6 AND    a.name IN (
7               SELECT segment_name
8               FROM dba_segments
9               WHERE tablespace_name = 'UNDOTBS1'
10              );
no rows selected
but still cannot drop the undotablespace.
SYS@ccasdb AS SYSDBA > drop tablespace UNDOTBS1 including contents and datafiles;
drop tablespace UNDOTBS1 including contents and datafiles
ERROR at line 1:
ORA-30013: undo tablespace 'UNDOTBS1' is currently in use
Regards,
Tim

Yes i was able to recover the datafile but the alert_log kept on prompting that it is still corrupted. The datafile's status is online.
I want to kill the session/s contributing to the PENDING OFFLINE status of the rollback segment so I can already drop the undotablespace and so
that the alert log will stop prompting for that corrupted datafile in that UNDOTABLESPACE.
Can i Just alter the tablespace's datafiles to offline drop then just drop it. Then I drop the tablespace?

To drop a tablespace(with contents) in Offline mode

A test tablespace in the prod (24x7) was not required and to before dropping it I put it in the offline mode (with immediate option) to prevent further access.
The tablespace is not empty and presently in the offline mode.
Can I drop this tablespace ?
How?
I dont want to perform any recovery. Please suggest?
Thanks

Yes, you can :
SQL> create tablespace test datafile '/u01/ora92/oradata/ora9/test.dbf' size 10M;
Tablespace created.
SQL> create table test01(a number) tablespace test;
Table created.
SQL> alter tablespace test offline;
Tablespace altered.
SQL> drop tablespace test including contents and datafiles;
Tablespace dropped.
SQL>You can even do it with the tablespace online :
SQL> create tablespace test datafile '/u01/ora92/oradata/ora9/test.dbf' size 10M;
Tablespace created.
SQL> create table test01(a number) tablespace test;
Table created.
SQL> drop tablespace test including contents and datafiles;
Tablespace dropped.
SQL>

Easiest way to access shared album with Lion only

one of my friends is still using Lion only and she's want to make a photobook on her Mac with the pictures from a shared album (not photo stream) that I created. She also has an iPhone and iPad that have iOS6 (she's willing to update to iOS7 if that helps) and thus can view the shared album.
under this situation, what's the easiest way for her to get the pictures over to her Mac? There are over 100 photos so email is something she wants to avoid. Apps that are not very expensive (<$10) is ok if they can do the job quickly. and high resolution preferred (doesn't have to be the full resolution)
and she's using aperture to create the photobook, not that i think it's too relevant to the question
thanks much in advance.

You might be thinking of Crossover. Not sure if Windows Media Player works under it, but their website has info on requested and working apps.
Best of luck.

Easiest Way to make scrolling text with color

What is the easiest way to make scrollable text that I can
set to whatever font I want (embeded of course)
have it look very well anti-aliased; like most Flash text, not like it's being read out of a regular system or browser window. (the text will be big so no probs)
have different portions of the text be different colors so I can highlight certain words and leave others alone
use actionscript to load text content into it
maybe make (all) the text semi transparent for design purposes
I'm going to use some action script to load some XML content into the text areas or whatever. Any of you know of any easy ways of accomplishing this? or have a link to any type of tutorial? (at least for Flash CS3 and above of course, along with ActionScript 3)

Go to Lee Brimlow's website. It has some great tutorials, including one on loading an XML file.
<url>http://www.gotoandlearn.com/</url>
Another good site is Kirupa.com
<url>http://www.kirupa.com/developer/flash/index.htm</url>

Easiest way to make a box with curved corners?

I currently have a table with border 1 but i want do curved
corners.
see bottom left of ths page.
What would be the easiest way to do this?. which softwares
would i need

Hi Mike,
> I currently have a table with border 1 but i want do
curved corners.
>
> see bottom left of ths page.
Looks very square to me :)
>
> What would be the easiest way to do this?. which
softwares would i need
Try google "rounded corners"
>
>
Kim
http://www.geekministry.com

Fastest and easiest way to drop a tablespace with LOB Segments

Similar Messages

Maybe you are looking for