Fastest Thunderbolt adapters for migration?

In migrating a MacBook Pro without Thunderbolt, to a new MacBook Pro with Thunderbolt, what would be the fastest in real life usage?
Going from Firewire to a FW/Thunderbolt adapter, or Ethernet to a Ethernet/Thunderbolt adapter on a new MacBook Pro?

You are welcome
Allan

Similar Messages

What wires/adapters to use for Migration Assistant

I have a lab with 28 Mac Minis. Typically I start the school year by creating a "perfect" computer and using Migration Assistant to make duplicates of that target computer to all the rest. Since these don't have typical Firewire ports, should I be using Thunderbolt to Thunderbolt connectors, using adapters for the newer Firewire ports so that I can keep using existing Firewire cables, or something else?

What Mac Mini's do you have. Per this
http://en.wikipedia.org/wiki/Mac_Mini
al the Mini's have FW. The early ones FW 40 and the latter one FW 800. You can connect the two with an adopter.

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden

HT204350 The instructions for "Migrating using FireWire or ThunderBolt" are WRONG

The instructions for "Migrating using FireWire or ThunderBolt" in this article are wrong for a transfer from a Mountain Lion Mac to a Mavericks Mac. You should not put the source Mac in target disk mode. Rather, you should start up Migration Assistant on the source Mac and choose "To another Mac"

Apple doesn’t routinely monitor the discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

We are going to Great Britain this summer. Do we need voltage converters as we'll plug adapters for our iPads (one is 2nd generation and one 4th)

We are going o Great Britain this summer. Do we need voltage converters as well as plug adapters for our iPads (one is 2nd generation and one 4th)

No. Since Apple power converter work from 110 to 240 volts, no power converter is reguired.
You will need a pin adaprt. I have found my local Ace hardware store to have the best deal on them.
Allan

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

EMIGALL performance for migration object OBJCLASS

Hi all,
my previous question, was Classification of IFLOT & EQUI via CLB2 / CLB1 & was focused on improving performance of classification of IFLOT & EQUI objects.
Testing EMIGALL for migration object OBJCLASS I am seeing no performance gains between a single thread update & parallel update threads. IE the single thread throughput is reported as ~the same as the parallel threads throughput combined.
I note in the job logs of my various tests;
for a single thread, that no messages are logged between the start & end of the migration.
for parallel threads, that message C4 200 'Class "CLASSNAMEHERE" is locked' appearing many times.
I don't see any unexpected migration errors in ether case.
Are there any insights on how I might improve over all throughput using this method? I cant see any control parameters for this object, nor does the Guideline have much information on OBJCLASS.
First world problems :-/

Hello Daniel,
Without having much insight into your system and infrastructure details or the volume that you are working with, I suggest for you to try below for performance improvement.
1. Run DB Statistics on functional location and Equipment related tables such as EQUI, IFLOT, ILOA, etc. (these are HLO objects that you are updating by way of classification). Also update classification table such as AUSP. These tables mentioned here as a starting point.
2. Also strongly suggest that a performance trace be done on this job to analyze and identify another table or steps that may be a performance bottleneck and maybe a candidate for DB statistics refresh Or some other corrective action.
3. The locks maybe occurring due to a mass update which is as expected. Perhaps to get by that you may want to use "commit buffering allowed" option for this migration object and set to say a number "10" or "20" to start with and see if it helps better the performance. As you would have noticed, locks will also impact performance.
4. Please also refer to Cookbook for ISUMIG Performance and refer to sections for DEVICE, CONNOBJ and DEVLOC. These are HLO objects for classification and there may be some useful insight in that document too.
Hope this helps.
Ash

Best practice for migrating IDOCs?

Subject: Best practice for migrating IDOC's?
Hi,
I need to migrate some IDOC's to another system for 'historical reference'.
However, I don't want to move them using the regular setup as I don't want the inbound processing to be triggered.
The data that was created in the original system by the processed IDOC's will be migrated to the new system using migration workbench. I only need to migrate the IDOC's as-is due to legal requirements.
What is the best way to do this? I can see three solutions:
A) Download IDOC table contents to a local file and upload them in the new system. Quick and dirty approach, but it might also be a bit risky.
B) Use LSMW. However, I'm not sure whether this is feasible for IDOC's.
C) Using ALE and setting up a custom partner profile where inbound processing only writes the IDOC's to the database. Send the IDOC's from legacy to the new system. Using standard functionality in this way seems to me to be the best solution, but I need to make sure that the IDOC's once migration will get the same status as they had in the old system.
Any help/input will be appreciated
Regards
Karl Johan
PS. For anyone interested in the business case: Within EU the utility market was deregulated a few years ago, so that any customer can buy electricity from any supplier. When a customer switches supplier this is handled via EDI, in SAP using ALE and IDOC's. I'm working on a merger between two utility companies and for legal reasons we need to move the IDOC's. Any other data is migrated using migration workbench for IS-U.

Hi Daniele
I am not entirely sure, what you are asking, Please could you provide additional information.
Are you looking for best practice recommendations for Governance, for example: Change transports between DEV, QA and PRD in BPC 7.0?
What is the best method? Server Manager backup and restore, etc ?
And
Best Practice recommendations on how to upgrade to a different version of BPC, for example: Upgrading from BPC 7.0 to 7.5 or 10.0 ?
Kind Regards
Daniel

Best Practice for Migration of BO from one server to another

Hi All,
I would like to know what is the Best pratice for Migration of BO from One server to another.
i have Installed BO Xi R2 on my server.
Thanks,
Anendu Bothra
Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
Choose Copy, then click OK.
Choose the version information for the source CMS database.
Select the database type for the source CMS database, and then specify
its database information (including host name, user name, and password).
Select the database type for the destination CMS database, and then
specify its database information (including host name, user name, and
password).
When the CMS database has finished copying, click OK.
Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
I'd advise taking full backups beforehand.

RFC Adapters for EBP and SUS systems

Hi!
We have Extended Classic Scenario up and running and now configuring SUS integration. We have done SLD configuration already and via TR SLDCHECK (has been executed on SRM server) has seen that XI connection is fine.
Now we have a question whether we need to configure RFC adapters for SUS and EBP systems? If yes, how can we do this?
Best Regards,
Siarhei

you need to define RFC connections between SUS and EBP , only if you want user synchronization between the systems....
connection should be of type --> ABAP CONNECTIONS --> type 3
and this is only optional and not mandatory .
you can find more details at the following customizing entry..
TRANSACTION SPRO
--> Supplier Relationship Management --> Supplier Self-Services --> Master Data --->
Maintain Systems for Synchronization of User Data

I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

No idea if Windows will do it, but you can run Windows without Bootcamp & have OSX available at the same time, which should give you all the Monitors that OSX uses.
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac

Can I purchase a Thunderbolt card for my Mac Pro?

Hi everyone, I was just wondering if Apple sells any Thunderbolt cards for a system which does not currently have the Thunderbolt ports on it? Thanks!

True TB has to be part of the motherboard and not just an add on.
Take a look and see what Intel has posted about specification and technology.
You want more bandwidth? for...? storage? video? RAIDs?
What do all the add on cards you can buy and upgrade lack? that TB would add?
Name? Apple is good at giving names for tech features.
There are USB3 cards and SATA 6G. You are limited of course in the number and choice in graphic cards, and in aux power connectors.
But I don't see TB as being needed in workstation. And it won't be until PCIe 3.0 / LGA 2011 socket and new motherboards. And Intel Ivy Bridge.

Does latest version of bootcamp installed on late 2013 rMBP put thunderbolt drivers for lacie external thunderbolt/USB 3.0 drive?

does latest version of bootcamp installed on late 2013 rMBP put thunderbolt drivers for lacie external thunderbolt/USB 3.0 drive?
I am wiping my current windows bootcamp partition and reinstalling windows using disk utility /bootcamp wizard to clean up and reinstall.
just curious if the Thunderbolt drivers get installed from bootcamp/windows sofytware update as I can't remember iif i had to do it manually before. I do see it shows up on windows side in device manager and if it is pluggged in during boot screen (to windows 7 pro 64 bit) shows ASMedia drivers being loaded for it.
Thanks

thank you so much I was pretty sure it did but wanted to be 100% sure as purpose of clean install was to clean up some mishaps I did with office 2007 (custom install), etc.
Many Thanks

How do I know what are custome code deployed on my site for Migration from 2010 to 2013

We have around 500 sites and several Webapplication. Now we want to migrate site from SharePoint 2010 to 2013
We will use Metalogix tool for Migration. However we want to know which custom changes site Have , SO those WSP we can deployed on 2013, So that Site will work fine After Migration.
SO question is there is any way where I can find what customization site have ?
I want poweshell which will tell me these WSP have deployed on this Sitecollection , SO that only those I will deploy on 2013 ? ALso
Suppose I have created Workflows through designer , is there any powershell which will tell me these workflow have deployed on particular site, so that I can check is those Migrated successfully or not.
Please mark answer , if you think answer is helpful or correct.

Hi,
Please see the link below that will give you detailed steps to identify customizations
Checklist for upgrade
Cheers
FrenchSpeaker - MCTS

When we have LSMW for migrating data then why we will go for Session/Call ?

Hi Guru's,
Could you please tell me ...
When we have LSMW for migrating data , why will go for Sessions/call Transaction for migrating? when we do with LSMW we can complete the object with less time then why we have will do with session/call transaction?
when we have to use LSMW ? and when we have to use SESSION/ CALL TRANSACTION ..
thanks in advance..
vardhan

LSMW can't upload large amount of data into the database.
Whereas BDC SESSION CALL /TRANSACTION method can upload large amount of data into the database.
The error capture method is superior in BDC.
BDC programs can be scheduled to run on periodic basis as per the customer requirements.

Fastest Thunderbolt adapters for migration?

Similar Messages

Maybe you are looking for