Fastest way to activate the camera?

What is the fastest way to activate the camera on the iPhone 3GS? (rather than pressing the on key; going to camera app;etc).

As to another place to click, I am in some doubt there. When I updated, it was just one of those things available and I did this in one go (as per previous post). I am not sure why this is not working in your case, but did you try powering down and then turning it back on again?
As to the point about 3.1.2 and 3.1.3 I so not think that makes a difference.
Ah, going straight from a locked phone to the camera? I know that one: no. And I regret this as much as you. How do you know you are going to take a spontaneous shot, eh?
A later note on your settings and iLukeKendall's input: you both have the iPod Controls Off, while mine are ON, but the double click reveals the camera for me. Hmmmm.

Similar Messages

  • Is there a way to turn the camera on and off remotely?

    Does anyone know of a way to turn the camera on and off remotely? I have a client that wants to mount a camera to the ceiling to photograph large rugs on the floor. We need a way to turn the camera on and off remotely and I am lookin for a solution.
    Thank you.
    Aric Attas
    [email protected]
    www.photonlab.com
    Solved!
    Go to Solution.

    I have at least one Canon remote that I've used with my 7D's. Unfortunately, I don't have it with me, because today's shoot doesn't require it. So I can't give you the model number. (Models come and go anyway.) It has a shutter button that you can press halfway to activate auto-focussing, just like the button on the camera. But you do have to make sure that the camera has an IR sensor. On a Canon DSLR, look for it where the fingers of your right hand would cover it up; I think that's intentional, so that a spurious IR beam won't fire the shutter while you're taking hand-held shots. Also, check that the camera and the remote are compatible, e.g. that they agree on the frequencies of light that are to be used.
    Bob
    Boston, Massachusetts USA

  • Is there a way to activate the whole application in Non Development system?

    Hi All,
    Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
    We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
    Application is a of storage type system and so cannot use changeability exit to activate on test system.
    TR log shows imported with error. Below is the extract of the error:
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    BRF+: Runtime client: 000 / target client: 400
    BRF+: Object activation of new version started for 418 object IDs
    BRF+: <<< *** BEGIN: Content from Application Component  CA  *** >>>
    BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ )  Table 'Dunning Proposal Line Items (Table)' >>>
    No active version found for 23.04.2014 08:14:10 with timestamp
    No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
    No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
    BRF+: <<< END  : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ )  Table 'Dunning Proposal Line Items (Table)' >>>
    BRF+: <<< *** END  : Content from Application Component  CA  *** >>>
    BRF+: Object activation failed (step: Activate )
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    BRF+: Import queue update with RC 12
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
    FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
    The errors affect the following components:
       BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
    Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
    Post-import methods of change/transport request DE1K901989 completed
         Start of subsequent processing ... 20140423011359
         End of subsequent processing... 20140423011412
    Any help would be appreciated.

    Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
    You may have a look at the request if it was OK. Probably not.
    Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
    Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
    E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

  • Is their a way to activate the "find my iphone" app with out having the iphone with you

    is their a way to activate the "find my iphone" app with out having the iphone with you

    how do i activate the lost mode on my "find my iphone" app without reporting it lost?  What do i have to do to activate this app prior to any loss?  [email protected] Thanks, JN

  • Macbook can't activate the camera after install the message beta.

    Macbook can't activate the camera after install the message beta. I'd tried to uninstall the message beta, macbook still can't activate the rear camera in iChat. But the camera still can work in Skype or face time. Why?

    Did you use the bad computer to post this message?
    Where did you get the Flash program from?
    Are all programs giving you problems, or only some? What ones?
    '''[http://support.microsoft.com/fixit/ Microsoft Fix it Solution Center: troubleshooting software issues]'''
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Is there a way to take the camera off lock screen with new 4s update? Or make it so you can't see my pictures?

    This is the one thing about the update that I just can't stand. There needs to be a way to fix this problem because I don't want anyone who happens to pick up my phone to be able to see my pictures. Also it's kind of annoying.

    If you set the Require Passcode to Immediately in Settings>General>Passcode Lock>Require Passcode>Immediately the iPhone cannot be accessed even if the camera was opened accidentally and subsequently neither could your photos as a message would appear stating Your iPhone is Locked.

  • How can I activate the camera on my iPad?

    How can I activate my camera on my iPad

    Russ_02 wrote:
    How can I activate my camera on my iPad
    (1) Camera is already activated.
    To use it, launch an app that operates the camera and tap the virtual shutter button.
    (2) For more specific help, see the iPad User Guide for iOS 7.1 Software. 
          (If your internet connection is slow, it may take a minute for this link to open.)
    Some apps that come with your iOS 7.1 and their User Guide references are:
    Camera: Chapter 12, starting on page 68
    Photo Booth: Chapter 19, starting on page 86
    If you live in a country that does not block it, FaceTime: Chapter 9, starting on p. 58.
    View photos you have already made in Camera Roll: Chapter 11, starting on page 63.
    (3) If you want to explore other camera possibilities, you can search the iTunes Apps Store for other apps that can use your camera.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Different way of ratating the camera

    Hi,
    considering using the rotate command can give out odd
    resultts, I am trying a different way of rotating my camera.
    basically I want my camera to rotate just like how a camera rotates
    in a 3d application. I took a look at a different appreoach by
    looking at a behaviour script that the chromeLib uses. The
    chromeLib behaviour I am referring to is called rotating target
    camera. Now, from what I can see, its method is controled by the
    left and right arrow keys, and its calculation is done by using
    triginometry. In addition, the script only causes the camera to
    appear like it is rotating in the z direction. So I took its
    formulay and I thought I could switch the rotating axis from z to y
    so that the camera would rotate on the y axis. In other words,
    instead of this....
    on exitFrame me
    set x = (cos(pVar) * pDistance)
    set y = (sin(pVar) * pDistance)
    sprite(spriteNum).camera.transform.position = vector(x, y,
    pModel.worldPosition.z + pPlunge)
    sprite(spriteNum).camera.pointAt(pModel.worldPosition,
    vector(0,0,1))
    go to the frame
    end
    I did this....
    on exitFrame me
    set x = (cos(pVar) * pDistance)
    set z = (sin(pVar) * pDistance)
    sprite(spriteNum).camera.transform.position = vector(x,
    pModel.worldPosition.y, z)
    sprite(spriteNum).camera.pointAt(pModel.worldPosition,
    vector(0,1,0))
    go to the frame
    end
    however, when I did this, my camera just flew all over the
    place. So how could I get this to work so that the camera could
    appear like it is rotating off its y axis?

    >basically I want my camera to rotate just like how a
    camera rotates in a 3d application
    can you explain this a little bit more detailed?
    regards!

  • What's the fastest way to change the acquisition ROI in IMAQdx

    I'm trying to change the Offsets and the image width and height from LabVIEW as fast as possible. With the code shown it takes about 200ms. Is there a faster way?
    Without the unconfigure and configure I get error -1074360304 0xBFF69010
    I'm running RT 8.6 
    Message Edited by InfiniteNothing on 03-04-2010 12:08 PM
    CLD (2014)
    Attachments:
    change aquisition.PNG ‏6 KB

    It's a pity because unconfiguring the camera and closing a camera session and takes a short, but not insignificant, amount of time. What I was trying to do was use a small number of lines (~100) in a loop to detect some movement in the object before capturing a much larger image (~8000 lines). But the time needed to reconfigure the camera was such that most of the sample had travelled past the camera before I could start capturing again. In essence I was trying to use the camera to trigger itself, given that the leading edge of my object could be ignored. Might there be another way around this?
    Simon

  • What's the fastest way to kill the battery...

    hello friends. i was wondering what's the fastest way to drain my macbook pro battery so i can calibrate it? i want to kill the battery not the laptop if you know what i mean. thanks.

    Turn on wifi + bluetooth and turn the brightness all the way up, and if its a new mbp, turn off the automatic video card switching in energy saver. Then just play youtube videos / movies / games (anything that uses the vid card as much as possible helps) till it goes flat.
    Message was edited by: TiMatApple

  • Second way to activate the iPod in iTunes?

    The only way I can activate the iPod in
    iTunes ( to add/subtract content )
    is to pull my iPod out of the Universal Dock
    and re-insert it... ( obviously when it's charging
    in pause )
    Is this the only clumsy way.
    There should be some sort of iPod
    icon/menu selection in iTunes...
    Am I miss something????'
    I am running iTunes 7.0.2, 5th gen. 30g, video iPod

    Have you tried closing iTunes and opening it again? That works for me when the iPod is connected to the USB port.

  • Can I activate the camera within a form and take an image?

    Can someone tell me if I can activate a camera within a form or a DPS product that contains a form. I wish to record the image of the person filling in the form.
    Thanks  Mike

    Hi miketaillie,
    Unfortunately, this option is not available in Adobe FormsCentral.

  • Is there a way to download the camera software without Windows XP?

    My temp pc is stuck on the old XP, cannot update it, so when I try to download the camera software, it freezes.
    Is there another way around it, like a wizard?

    checkin wrote:
    My temp pc is stuck on the old XP, cannot update it, so when I try to download the camera software, it freezes.
    Is there another way around it, like a wizard?
    I downloaded Canon's software for years using XP. It's much more likely that the problem is in your browser. If you're using IE, make sure you're at the latest rev the OS will support; and if that doesn't work, try another browser (e.g., Firefox or Chrome).
    Bob
    Boston, Massachusetts USA

  • Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

    Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task?  It seems that would be very useful, yet I can't find an easily available setting for it.  I would prefer to
    accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered.  I thought setting "CopyPrimaryKeys"
    to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table. 
    I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

    IIRW there is FastLoadKeepIdentity specifies
    whether to keep an identity in OLEDB destination 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Is there a way to activate the WiFi sync option without my device connected (iTunes/ PC cannot see my iPad 2)?

    When I connect my device (iPad 2) to my PC via USB it isn't seen by both my PC and iTunes, it just charges so I know my USB isn't broke. I want to activate the WiFi sync option to sync my data on my iPad because I can't anymore. Earlier I had the option checked but I wanted to compare the speeds of syncing and I couldn't reactivate the setting.
    I have looked around and I have seen not one helpful forum or thread, they all lead to this link: http://support.apple.com/kb/HT1386
    Any useful information would be great!

    Howdy CalSeedy,
    The following article contains tips that can help get iTunes to recognize your phone again.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

Maybe you are looking for