Fastethernet hardware status down

I have a 1400 Bridge connected to 1300 AP using 2940 switch. Things were working fine. When I reveiwed the IOS the fastethernet hardware status was DOWN. What some things to resolve this and bring back UP?

WHICH Fastethernet port is down (AP, Switch, or Bridge)?
Check the cabling, check the power injector / brick, try doing a shut / no shut on the affected interface, try another port of the switch (for both bridge and AP) ...
Some details would help a lot
Let us know
Scott

Similar Messages

  • Concurrent processing status down in OAM

    Hi ,
    From OAM->Applications Dashboard ->Overview
    the status for concurrent processing shows down but infact it is up
    I also checked from OAM->Hosts->view configuration
    whereas here the status for concurrent processing is up.
    thanks all in advance..
    applications version: 11.5.10.2

    Hi,
    Please see if these documents help.
    Note: 405375.1 - OAM Reports 'Internal Concurrent Manager Found Node To Be Down.' When Node is Up
    Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
    Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
    Note: 434569.1 - OAM application dashbord shows all the web components with status down whereas they are up
    Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
    Regards,
    Hussein

  • Monitoring Hardware Status HP ESXi with HP SIM, Get information by SNMP

    Hi.
    Check out to tring this steps http://h30507.www3.hp.com/t5/Technical-Support-Services-Blog/6-Simple-Steps-to-Monitoring-ESXi-with-...
    It's ok, I having health hardware  status for the server in the HP SIM 7.3 by wbem with Custom HP Image ESXi 5.5 onboard by wbem .
    Did any solution to get health status from hp server ESXi or from HP SIM 7.3 by SNMP to another monitoring software?

    Have now solved it myself:
    1) Create system restore point
    2) Uninstall mobile broadband driver and centrino ultimate-N in device manager, but keep files
    3) Reboot
    4) Lenovo access connections automatically connects to mobile broadband. It's then just a matter of going in there and connecting to wifi also.
    Everything is working beautifully now, and switching between wifi and mobile automatically. I think it was just corrupted TCP/IP settings in one or both adaptors.
    X230, Core i7, 16GB memory, 512GB Samsung 830 SSD

  • IDSM-2(5.0)inline mode- Pair Status=down??

    I have trouble with configuring idsm-2 inline mode(5.0).
    it seems that traffic doesn't go through idsm.
    I chechked it on command: sh interfac gi0/7(idsm mode)
    the 'pair Status=down'(below) shows that, i think.
    moreover, total packet received doesn't increase.
    how do i solve it?
    Please help!
    xxsystems# sh int gigabitEthernet0/7
    MAC statistics from interface GigabitEthernet0/7
    Media Type = backplane
    Missed Packet Percentage = 0
    Inline Mode = Paired with interface GigabitEthernet0/8
    Pair Status = Down
    Link Status = Up
    Link Speed = Auto_1000
    Link Duplex = Auto_Full
    Total Packets Received = 38
    Total Bytes Received = 2584
    Total Multicast Packets Received = 38
    Total Broadcast Packets Received = 0
    Total Jumbo Packets Received = 0
    Total Undersize Packets Received = 0
    Total Receive Errors = 0
    Total Receive FIFO Overruns = 0
    Total Packets Transmitted = 12
    Total Bytes Transmitted = 1152
    Total Multicast Packets Transmitted = 0
    Total Broadcast Packets Transmitted = 12
    Total Jumbo Packets Transmitted = 0
    Total Undersize Packets Transmitted = 0
    Total Transmit Errors = 0
    Total Transmit FIFO Overruns = 0

    You can only pair interfaces on your sensor if your sensor is capable of inline monitoring.
    http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_installation_and_configuration_guide_chapter09186a00803eb069.html

  • Monitoring CAN hardware status.

    I am trying to display the status of each CAN (network and frame) object that I have configured in a C++ application. We are required to support both Series 1 and Series 2 cards.
    I tried to extract the status from the NC_ATTR_STATE attribute. It displays the correct state most of the time. Unfortunately, the returned state does not seem to be returning consistent values. I have two CAN channels connected with terminating resistors. I start transmitting on both channels. I disconnect the cable. The state that is returned is mostly 0x20 (NC_ST_WARNING) but occasionally the state 0x02 NC_ST_WRITE_SUCCESS is returned. How can a write be successful if there is no communication?
    Is there any other way to monitor the hardware status that works on both Series 1 and Series 2 cards?
    Thanks in advance.

    Hi scottw,
    take a look a the description of the desired state: NC_ST_WRITE_SUCCESS
    "When communication starts, the NC_ST_WRITE_SUCCESS state is true by default."
    and
    "The state is set when the last frame in the write queue is transmitted successfully. The state is cleared when a write function is called."
    Thus, you could see a NC_ST_WRITE_SUCCESS state, even though there is/was no communication.
    -B2k

  • 1300 Bridge fa0 port status down

    I have a remote 1300 bridge whose fa0 port consistently goes down after working well for over a week. It shows the port as admin up but line status down - no carrier. It plugs directly into a 1200 ap. I have tried to hard code the speed and duplex but the option to hard code the speed is not available. Any ideas?

    Hi
    yes the console port on the power injector is is console port for the AP. probably the best way to recover the bridge is to connect the 1310 to a laptops etherernet port and use the console port to learn the IP of the 1310 then manage the 1310 with the GUI it can be done with the CLI but if you have not done a wireless bridge before stick with the GUI. Both 1310's need to be on the same subnet, this is for management not for bridging. the bridging is at level 2 unless you use VLANS but with the routers that should not be an issue. once you have configured the Root router save the config and use it to to congigure the non-root router changing the IP address and the role to Non Root. plug the network cables into the the apropriate router ports and you should be set.
    this is assuming you know the userid/passwords for the AP's  the default was Cisco/Cisco.
    if the antennas are alinged your bridge should be reliable.
    based on the signal level between the AP's i would disable the B data rates use the G data rates and possibley disable the higher data rates if the radio stats show to many retrys, mor than 10%.
    Bill

  • WIPS service status down

    Cant get my wIPS service running...
    Running 24 controllers( 4400s and wisms) , ver 6.0.188 using WCS ver 6.0.170  with 800+ 1140 access points
    Just installed an MSE 3310, WCS sees it and knows what it is.
    I cant seem to get the wIPS service to come up... status on WCS ( and MSE) is   "admin status enabled" .."operational  status down"
    Is there another step/trick to get it running ?
    Thanx

    Thanks Nael,
    MSE ver = 5.2.91
    WCS ver = 6.0.170
    stopped service via msed stop
    grep for any msed processes.... none shown
    started service via msed start
    echos back with the attached file output
    Starting MSE Platform
    Type: NAME Value: Chassis
    Type: DESCR Vlaue: Cisco 3310 Mobility Services Engine
    Type: PID Value: AIR-MSE-3310-K9
    Type: VID Vlaue: V01
    Type: SN Value: < removed>
    Starting MSE Platform, waiting to check the status
    Starting MSE Platform, waiting to check the status
    Starting MSE Platform, waiting to check the status
    MSE Platform is up, getting the status
    Unable to get MSE status.      Retrying status fetch -
    Unable to get MSE status.      Retrying status fetch -
    Unable to get MSE status.      Retrying status fetch -
    "getserverinfo" returns the same output

  • Fastethernet port showing down down

    Hi guys,
    I have a port on my switch that always shows down.
    #show interfaces fastEthernet 1/0/19
    FastEthernet1/0/19 is down, line protocol is down (notconnect)
      Hardware is Fast Ethernet, address is 001e.f686.dd15 (bia 001e.f686.dd15)
      Description: IP Phone & PC Port
      MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Auto-duplex, Auto-speed, media type is 10/100BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 6w3d, output 00:10:24, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 15
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         11189035 packets input, 8414542539 bytes, 0 no buffer
         Received 103348 broadcasts (27165 multicasts)
         0 runts, 0 giants, 0 throttles
         1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 27165 multicast, 0 pause input
         0 input packets with dribble condition detected
    Regards,
    Norman D.

    Hello Norman
    This is saying it even nothing is attached to that port or something physical is wrong -Please check your connections - cabling/sfp's/ ports.
    res
    Paul
    Please don't forget to rate this post if it has been helpful.

  • IDSM data port status down

    Dear all,
    I am facing strange problem with 6500 IDS module.Management port of IDSM is up and Data port 2 Operational Mode: down.When i check traffic on this port it is one way only.I can able to ping IDSM management IP but when i try to telnet it given only banner after that it hang.
    Will i need to reset IDS module to solve this problem.Is there any other way to solve this problem.
    THanks & Regards
    SAM

    Thanks for your reply,
    Actually we did not make any changes in configuration.This is working configuration.We can able to ping IDS IP , but when try to telnet i got banner of IDS but does not allow me to give any commands.
    I am little bit confused about data port of IDS.Operation mode of IDSM is down.
    MSFC_SW#sh intrusion-detection module 8 data-port 2 sta
    Intrusion-detection module 8 data-port 2:
    Switchport: Enabled
    Administrative Mode: trunk
    Operational Mode: down
    Administrative Trunking Encapsulation: dot1q
    Negotiation of Trunking: Off
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Trunking VLANs Enabled: NONE
    Pruning VLANs Enabled: 2-1001
    Capture Mode Enabled
    Capture VLANs Allowed: 1-150
    Vlans allowed on trunk:none
    Vlans allowed and active in management domain: none
    Vlans in spanning tree forwarding state and not pruned:
    none
    Administrative Capture Mode: Enabled
    Administrative Capture Allowed-vlans: 1-150
    MSFC_SW#
    MSFC_SW#sh intrusion-detection module 8 data-port 2 traffic
    Intrusion-detection module 8 data-port 2:
    Specified interface is up line protocol is down (monitoring)
    Hardware is C6k 1000Mb 802.3, address is 000f.905c.6407 (bia 000f.905c.6407)
    MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
    Encapsulation ARPA, loopback not set
    Keepalive set (10 sec)
    Full-duplex, 1000Mb/s
    input flow-control is off, output flow-control is unsupported
    Last input never, output never, output hang never
    Last clearing of "show interface" counters never
    Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: fifo
    Output queue: 0/40 (size/max)
    5 minute input rate 0 bits/sec, 0 packets/sec
    5 minute output rate 2350000 bits/sec, 2355 packets/sec
    0 packets input, 0 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
    0 input packets with dribble condition detected
    21555252761 packets output, 3201907351815 bytes, 0 underruns
    0 output errors, 0 collisions, 3 interface resets
    0 babbles, 0 late collision, 0 deferred
    0 lost carrier, 0 no carrier
    0 output buffer failures, 0 output buffers swapped out
    MSFC_SW#
    This is interface status in MSFC.
    Hope now you can understand my problem.
    TIA
    SAM

  • Cisco Wireless AP radio interface shutdown/Operation Status Down

    Hi,
    I am trying to troubleshoot the cause of the wireless AP 1142 radio shutdown; I was wondering where may be a good place to start on it/possibility of the radio shutting down. Once the radio is shown as down; I would just need to re-enable (disable/enable) it and the status changes to up status. I have attached a screen catpure of the radio interface showning down.
    The AP radios shutting down is intermittent; some APs has their "A/N" radio interface shutdown while others has their "G/N" radio interface shutdown. Not too sure what may most likely be causing it to shutdown?
    Any input is appreciated.
    Thanks.

    Do you have controller ?? if yes then posts out put of sh sysinfo commad.
    Paste the output of sh version command from AP.
    Also check: 
    1. Choose Wireless > 802.11a/n or 802.11b/g/n > Network
    Select the 802.11a (or 802.11b/g) Network Status check box to enable the 802.11a or 802.11b/g band.
    2. Wireless > Access Points > All APs then click on specific AP and make sure admin status is enable.
    Reagrds

  • Single Sign-On:orasso Status Down After Enabling SSL

    The status of Single Sign-On:orasso is listed as down in Enterprise Manager after enabling SSL. The same problem existed in with the Portal component, but this was fixed by adding a certificate to the certdb.txt file and by changing some URLs in the targets.xml file.
    Does anyone know how to correct this issue with Enterprise Manager? It has no effect on the behavior of our application, but it is causing problems with administration because some people use the Enterprise Manager console to monintor the state of our environment.

    Hi,
    Did U try this the following steps;
    When the configuration is finished, take the following steps:
    1.
    In the Application Server Control Console Confirmation page, click OK. The Application Server Home page appears.
    2.
    If you did not have an OC4J_SECURITY instance before, you will have one now. The OC4J_SECURITY instance will have a status of Down. You will also have a Single Sign-On:orasso instance with a status of Down. Select the check box next to OC4J_SECURITY and click Start.
    Note: You cannot start the Single Sign-On:orasso instance. This feature is started and stopped when you start and stop HTTP_Server and OC4J_SECURITY.
    3.
    When the operation completes, verify that OC4J_SECURITY has a status of Up.
    Note: The Single Sign-On:orasso status may be displayed as Down. This is normal. The status should be updated approximately five minutes after configuration.
    4.
    Select HTTP_Server and click Restart.
    5.
    Verify that you can access OracleAS Single Sign-On at the following URL:
    http://hostname.domain:port/pls/orasso
    In the URL, hostname.domain is the host on which OracleAS Single Sign-On is installed and port is the Infrastructure HTTP Server port.
    You can log in as orcladmin with the orcladmin password.
    Also try to check Oracle Application Server Single Sign-On Administrator's Guide
    Hear from U & regards,
    Hamdy

  • Portal status DOWN on EM but details show UP?

    Hi,
    I just installed 9iAS v2 (9.0.2.0.1) and used all default configuration. Infrastructure and mid_tier are installed on seperate unix box. Right after the installation all components are show status UP except unified message (down) and discoverer (? mark).
    After I made change to ORACLE_HOME/reports/conf/rwservelet.properties and rep_reports.conf files (following Note 210224.1) AND re started all on the mid_tier (follow note 200475.1), the status of portal:7777 on EM is DOWN, but the deails shows (click on the poratl link ) UP.
    other info on this detailed page are:
    left side:
    monitoring down
    database (on infrastructure) down (I can login scott/tiger@discodemo)
    on right side:
    mod_plsql_services down
    parallel_page_engine_services down
    syndication_server down
    Does anybody knows what these means and how can I fix it ?
    Thanks

    Happens all of the time. Bottom line is that the portal is up and running (assuming you can access it via /pls/portal). Oracle says this is due to underlying network issues, but I've seen this on every install I've done. I have noticed if you drill down further into the portal instance and then return to the main instance page, EM will show that it is up.
    Sure it is a bug...

  • 3702E-Operational Status DOWN

    Hi All,
    When we tried connecting ap, its registering to the WLC 5508 with version 7.6.120.0. But it shows operational status as DOWN in WLC and blinking in red,green continuously. If i admin disable it, then it is coming UP and instantly goes DOWN. 
    Any Suggestion.

    see whether you have correct country code configured on your WLC & connected AP is in the right regulatory domain.
    Wireless LAN Compliance Status
    Post the AP console output to see what's exactly happening.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Oper status down

    HI,
    I recently bought a Cisco 2504 Wireless Controller and a couple of access points (Cisco 1600 Series). Initially the controller had the 7.0.x.x firmware and from what i read on Cisco website it seems that this version is incompatible with my access points, so I updated the firmware on the controller to the latest version (7.4.110.0.). The access points were intially autonomous, so I installed the latest conversion to lightweight iOS image (ap1g2-rcvk9w8-tar.152-4.JA1). All work beautiful and I was happy until i discovered that after  the acces points succesfully join the controller the radio interfaces won't come up. On the controller i get the following messages:
    AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:7c:95:f3:6c:c6:30 Cause=Unknown Reset Status:NA
    AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:7c:95:f3:6c:c6:30 Cause=Unknown Reset Status:NA
    And here's what the acces point displays in logging mode:
    *Sep 27 06:35:01.169: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.10.1, mask 255.255.255.0, hostname APc08c.601f.260d
    Translating "CISCO-CAPWAP-CONTROLLER.xxx.local"...domain server (10.0.0.1) [OK]
    *Sep 27 06:35:03.605: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Sep 27 06:35:13.609: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Sep 27 06:35:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.5 peer_port: 5246
    *Sep 27 06:35:02.491: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.5 peer_port: 5246
    *Sep 27 06:35:02.491: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.5
    *Sep 27 06:35:02.495: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Sep 27 06:35:02.495: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Sep 27 06:35:02.495: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Sep 27 06:35:02.495: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.10.10.5
    *Sep 27 06:35:03.131: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Sep 27 06:35:03.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Sep 27 06:35:03.259: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller WLC_Intranet
    *Sep 27 06:35:03.311: ac_first_hop_mac - IP:10.10.10.5 Hop IP:10.10.10.5 IDB:BVI1
    *Sep 27 06:35:03.311: Setting AC first hop MAC: 4c00.8259.4ee0
    *Sep 27 06:35:03.311: ac_first_hop_mac - IP:10.10.10.5 Hop IP:10.10.10.5 IDB:BVI1
    *Sep 27 06:35:03.311: Setting AC first hop MAC: 4c00.8259.4ee0
    *Sep 27 06:35:03.683: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
    *Sep 27 06:35:04.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Sep 27 06:35:04.203: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    I must metion that all settings on the controller are fine (the access points interfaces are set to enable), but they just don't want to come up. I'm completely baffled by this problem and I don't know what to do next ? Can someone explain what's happeining ?
    PS: The access point are powered by their standard AC-DC power supply (not over PoE).

    Thanks for replies! One of the first thing that I did was to configure a NTP server, so the controller is time synchronized. Aslo I manually enable each radio interface.
    Here is the output for "show ap config 802.1b" (partial output):
    Cisco AP Identifier.............................. 14
    Cisco AP Name.................................... APc08c.601f.260d
    Country code..................................... RO  - Romania
    Regulatory Domain allowed by Country............. 802.11bg:-E     802.11a:-E
    AP Country code.................................. RO  - Romania
    AP Regulatory Domain............................. -E
    Switch Port Number .............................. 1
    MAC Address...................................... c0:8c:60:1f:26:0d
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.10.10.7
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 10.10.10.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ default location
    Cisco AP Floor Label............................. 0
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W  Version .................................... 7.4.110.0
    Boot  Version ................................... 15.2.2.0
    Mini IOS Version ................................ 7.5.1.73
    Stats Reporting Period .......................... 180
    Stats Collection Mode ........................... normal
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Enabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-CAP1602E-E-K9
    AP Image......................................... C1600-K9W8-M
    IOS Version...................................... 15.2(2)JB2$
    Reset Button..................................... Enabled
    AP Serial Number................................. FGL1735X02L
    AP Certificate Type.............................. Manufacture Installed
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    For the 802.11a interface things are almost the same.
    Output for show sysinfo:
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.4.110.0
    Bootloader Version............................... 1.0.16
    Field Recovery Image Version..................... 1.0.0
    Firmware Version................................. PIC 16.0
    Build Type....................................... DATA + WPS
    System Name...................................... WLC_Intranet
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
    IP Address....................................... 10.10.10.4
    Last Reset....................................... Software reset
    System Up Time................................... 3 days 5 hrs 33 mins 41 secs
    System Timezone Location.........................
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Output from "show time":
    Time............................................. Sun Sep 29 19:22:01 2013
    Timezone delta................................... 0:0
    Timezone location................................
    NTP Servers
        NTP Polling Interval.........................     3600
         Index     NTP Key Index     NTP Server      NTP Msg Auth Status
           1              0        x.x.x.x       AUTH DISABLED
    Output from "show verion" on one of the APs:
    Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 29-Jul-13 12:35 by prod_rel_team
    ROM: Bootstrap program is C1600 boot loader
    BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)
    APc08c.601f.260d uptime is 30 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap1g2-k9w8-mx.152-2.JB2/ap1g2-k9w8-mx.152-2.JB2"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP1602E-E-K9    (PowerPC) processor (revision B0) with 98294K/32768K bytes of memory.
    Processor board ID FGL1735X02L
    PowerPC CPU at 533Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.4.110.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: C0:8C:60:1F:26:0D
    Part Number                          : 73-14508-04
    PCA Assembly Number                  : 000-00000-00
    PCA Revision Number                  :
    PCB Serial Number                    : FOC17292D61
    Top Assembly Part Number             : 800-38553-01
    Top Assembly Serial Number           : FGL1735X02L
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-SAP1602E-E-K9
    Configuration register is 0xF
    Output from "show inventory " on one of the APs:
    NAME: "AP1600", DESCR: "Cisco Aironet 1600 Series (IEEE 802.11n) Access Point"
    PID: AIR-SAP1602E-E-K9 , VID: V01, SN: FGL1735X02L
    Output from "show inventory " on one of the APs:
    Interface                  IP-Address      OK?  Method  Status                Protocol
    BVI1                       10.10.10.7     YES  DHCP     up                    up
    Dot11Radio0                unassigned     NO  unset     administratively down    down
    Dot11Radio1                unassigned     NO  unset     administratively down    down
    GigabitEthernet0             unassigned     NO  unset     up                    up
    GigabitEthernet0.1           unassigned      YES  unset     up                    up

  • Why 12C Grid Control shows Target status down/Unavailable?

    Hello,
    The grid control 12.0.2 on Oracle Linux 5.9 shows that status of target /EMGC_GCDomain/GCDomain/EMGC_ADMINSERVER as down where as it is up and running and I can log into admin console.
    Please note that repository, OMS, weblogic all components are on same server.
    It is also showing that following are unreachable where as these are up on same server
    EM Website System
    Management Services and Repository
    How can I diagnose and fix this? Where to start?
    Thanks.

    Have you checked the agent status with emctl status agent? Is the OMS available there and when was the last upload time?
    You can also try emctl upload agent and see if this helps.
    Is the dbsnmp account unlocked with correct password in the target database?
    rgds
    Kjell

Maybe you are looking for