Fastpath and other request regarding 21CN.

First of I'll just post my stats to get it out the way.
*Regarding the screenshot I'm not sure why it's saying I've been connected for 2 hours? I've been playing an MMO for the past 4-5 hours and never had any break in connection or disconnections?*
I'd like to change to fastpath and if so is there any way to stick the connection to fastpath permanently? As I prefer the 10-15ms ping rather than the 30-40ms.
Also here's the BTW Test thing.
Also I've noticed I'm only syncing on ADSL1 or Max or whatever it's called. Is there anyway to change this without buying another router? I know my download speed won't benefit at all and will probably decrease slightly but I currently have another Phonline into my property that's on ADSL2 (Not 2+) and is getting 700-800kbps upload instead of the 448kbps that I'm capped at on this line.
Any information, advice, help would be nice.
Cheers.
If you felt my post was informative and helpful then please click the star below my name/avatar.
Cheers!
Solved!
Go to Solution.

your conenction has dropped hence why the 2hrs connection time - it may have been quick in reconnecting but it has dropped. you need to show a longer conenction period to show how stable conenction before you will get manually moved to fast. if the exchange saw your line that good it would move you automatically
you cannot get fixed on fast
check your exchange and see if 21CN enabled - there is no need to change router normally to get adsl 2/2+
check exchange here
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

How to disappear location request in camera and other apps, how to disappear location request in camera and other apps

I had turn off location service for some apps and turn off cellular and wifi location for camera too, but when eveytime I turn on camera and other apps it keep appear:
1. turn on location service for camera for better location
2. cellular date is turn off for " xxxx apps"
Press "Setting" or "Done"
which is very annoying, did anyone have any idea how to fix it/ make the notification disappear?
thx very much

There is no way to turn it off at this time. Please submit your feature request to Apple at this link: http://www.apple.com/feedback

Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I bought iphone 4 in US and i and other person not able to listen properly because on the time of conversation voice cracking and difficult to understand each others.so i would like to request you that please solve the above problem.i love my iphone.

Sir,
I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
waiting for your earliest reply.
thanks
Rajeev Gupta

Hello sir
As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
I will be thankful to you
Rajeev Gupta

My daughter's ipod is on my itunes account. Now we're getting each others messages and facetime requests. How do I change that?

My daughters iPod is on my iTunes account. Now we're "linked" so that I get most of her text messages and facetime requests and she gets some of my text messages. Is there any way to make sure this doesn't happen? It's very annoying!!

Welcome to the Apple Community gr8leakes.
You could simply ensure that only the numbers and addresses you wish to use on each device are checked at Settings > Messages > Send & Receive. However this isn’t an ideal solution because the other person can always change these settings from their device and have some fun with you and your contacts.
You’d be far better getting them to delete your account from their device and have them create one of their own. If you are sharing an ID for some other service such as iTunes, you can continue to do so, you only need change the ID for messages.

Difference between task request and change request

What is the difference between task request and change request during sap implementation. In general how many tasks will generate during a normal company inmplementation by any functional consultant?

Hi,
Change request and task request are same.But generally change request is generated during newly created objects or reports that are transported and task request is used when u regenerate the change request by modifying that object again and transporting it in new change request.
A particular change request may contain multiple number of task request but that number depends upon number of objects u transfer during generation and transportation.
Pls do reward points if ans is useful.
Regards,
Suhas.

DBI Initial and Incremental request sets

Dear All,
We have installed EBS R12 vision instance as well as Blank instance(2 different instances)
As we have one utility in EBS R12 i.e DBI (Daily Business Intelligence) and there are so many Initial and Incremental request sets to populate the materilized views and summary tables for fiancials, HRMS, procurment etc.
We can see these request sets in EBS R12 vision instance however we are not able to see these request sets in blank instance.
So my question is that do we have to enable or is there any configuration or setup to view those request sets in DBI or we have to create all the request sets manually in blank instance.
Thanks in advance.
Regards,
Tarang Jain

Tarang,
Please refer to [Oracle Daily Business Intelligence Implementation Guide|http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120dbiig.zip], Page 2-74 -- Create Initial and Incremental Request Sets.
Regards,
Hussein

Service Desk and Change Request Config document

Hi SolMan Experts,
Could you please help in getting Service Desk and Change Request Management Configuration document please !!!
Thanks in advance.
- Ignacio.

Hi,
Please get the stuff from the following sites.
1. http://help.sap.com/ -> SAP NetWeaver -> SAP Solution Manager
2. http://service.sap.com/solutionmanager
3. use tcode SPRO--> search for service desk and follow the steps.
4. use tcode SPRO--> search for Change Request management and follow the steps
Regards,
Srini Nookala

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Attaching Package and transport request for existing SAPScript

Hi!
I require to attach development class and transport request in one existing SAPScript. Can anyone please suggest how to do?
Thanks and regards,
Atanu

Hi Atanu,
   You can try following two methods -
   1. Display SAPSCRIPT and use option goto -> Object directory entry and change the "Package".
   2. If that is not allowed, try using Txn. SE03 and try changing Object directory entry from there.
If you assign a package which is transportable, system will prompt you for a transportable request.
Cheers,
Sanjeev

What do the wait events 'gc cr failure' and 'cr request retry' mean?

I'm trying to troubleshoot an issue for a customer. Environment is Oracle 10.2.0.4 (64-bit) on Redhat 5. Two node RAC cluster. The 10046 trace file shows lots of 'gc current block 2-way' waits but also a few 'gc cr failure' and 'cr request retry' waits. The 'cr request retry' waits take about 0.9 seconds each. I cannot find much if any information on these two wait events. Any help is much appreciated.
Thanks!

Hi,
Also, you might need to check the protocol is being used for the interconnect communication.
here are the steps just in case:
$ORACLE_HOME/bin/sqlplus / as sysdba
oradebug setmypid
oradebug unlimit
oradebug ipc
oradebug TRACEFILE_NAME
Review the file that the last oradebug gave you back.
Metalink note 181489.1 provides some handy steps to analyze your situation. (also contains the latest supported protocols for IPC)
Hope this helps
Regards,
Jozsef

Confirmation of Support notification and Change request.

Hi Guru's,
In my clinets landscape we are using ChaRM for Change requests and Urgent correction. We have two situation here to handle.
1. I (Change Manager) should only be able to confirm a support notification if all the dependent/subsequent change requests have been confirmed
2. I (Change Manger) should only be able to confirm a change request if all the dependent/subsequent urgent corrections have been confirmed.
Request your help.
Vinod

Hi,
you can customize that your change request will automatically get a new status if the linked urgent correction reached a specific satus.
You can then do the same with support message and change request. This will lead to a chain where your support message is confirmed automatically if your urgent correction is confirmed.
Check SPRO - Make Setting for Change Transaction Types - Assign Actions "SET_PREDOC"
Best Regards
Daniel

Move from one request number to other request number

hi,
i created one tcode and saved it in one request number. but i want to save it in other request number.
what i did ....i deleted that tcode and again created but its saving on the same request number...
can any one help me...

Hi,
Follow these steps
go to se09. select the request in which TCODE is save - expand it. select the TCODE select DELETE.
Note : This will delete LOCK object associated and not the object i.e. TCode itself.
Assign TCODE to another request. There are various ways :
1. Go to SE80 --> Enter the package in which Tcode is assigned. Right click on TCODE -- Other Functions - Write Transport Entry . Specify new transport you want to assign to your Tcode
2. Another way is to directly make entry in Request object. Goto se09 - double click on Request in which you want to save your Tcode-- goto Objects Tab - Create new entry with program ID R3TR and Object type = TRAN.Give your tcode name in Object name. press Enter. Save the Request
Regards,
Mohaiyuddin

What is meant by change pointer and change request

hi,
what is meant by change pointer and change request in sap r3
plz can u any one notes or link on this , or if possible briefly tell about this..
i am looking for clear idea on this..
thanks
Ruban

With respect to Dictionary Change pointers means all the changes done to dictionary objects.
All the change logs with respect to tables are stored in CDHDR and CDPOS table
Change Pointers in broad sense are used with respect to IDOC
Change Pointers & Reduction of IDOCs.
Applications, which write change documents, will also try to write change
pointers for ALE operations. These are log entries to remember all modified
data records relevant for ALE.
Following Steps must be followed in case of Change Pointer.
1) Goto Transaction BD60.
Note down the Details of the Message Type for which change pointer has to activate. Details like Function Module, Classification Object, ALE object Type etc.
E.g. ZDEBP3
2) Next step is goto transaction BD53
Click on change button.
First select the segment for which the fields has to modified (either remove or
add ).
It will show the fields in a pop-up window where the user can select, deselect the respective fields.
Save the settings for the Message type. Dont forget to activate the change pointers by clicking Activate Change pointers button on the main screen.
3) Once the activation is done system will reset the settings for the Message type in Change pointers (BD60). Maintained the old settings for the Message type.
Check this FAQ
. Do you really need change pointers?
You need change pointers to distribute changes with the ALE SMD tool. If you do not use this tool, you do not need to write change pointers.
You can deactivate change pointers and activate them again with the transaction BD61.
2. Do you really need to activate change pointers for this messages type?
If some messages types are no longer to be distributed by change pointers, you can deactivate change pointers for this messages type.
You can deactivate change pointers for the message type
and reactivate them again.
For reduced message types, deactivate the change pointer with the
Reduction tool (transaction BD53).
3. Are there still too many change pointers to be processed?
The change pointers are analyzed with the transaction BD21 or the report RBDMIDOC in ALE and flagged as processed. If the change pointers are created periodically, this report should also run periodically.
4. Are no longer required change pointers reorganized in time?
The report RBDCPCLR (transaction BD22) to reorganize the change pointer should run periodically. Depending on how many change pointers are created or processed, you can schedule the background job hourly, daily or weekly. You should delete all obsolete and processed change pointers. You can also use this report for specified message types.
We come across change pointer technique while dealing with master data distribution thru ALE/IDOCs
When we want to reflect changes made to master data(i.e customer master, vendor master, material master ...) visible to other clients listed in customer distribution model, we follow change pointer technique.
What is customer distribution model?
A customer model depicts various messages (master data, transactional data) exchanged between the systems and establishes a sender and receiver of data
A customer model is always maintained on any system for the entire distributed network of SAP systems, so it must be distributed to various systems in the distributed network.
These r some details regarding change pointer technique which u may find it usefull.............
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master, vendor master & sales orders. changes made to a document are recorded in the change document header table CHDHR, and additional change pointers are written in the BDCP table for changes relevant to ALE. BDCPS table stores the status of changed documents processed or not.
The process for distributing master data using change pointers involves the following steps.
The application writes change documents. SAP maintains change documents for
several objects in the system, such as materials, customers, invoices, and bank data, to provide an audit trail for changes made to an object. A change document object represents a set of tables for which changes are recorded. For example, the change document for the material master is named MATERIAL and it contains the various tables of the material master object, such as MARA and MARC.
When an application transaction makes changes to an object, the application writes change documents, which are stored in the CDHDR and CDPOS tables for each change made to an object.
Tip
Execute transaction SCDO to see a list of change document objects and
their tables.
The SMD (Shared Master Data) tool writes change pointers. When changes are made to an object, the SMD tool checks the ALE settings and consults the ALE distribution model to determine whether a receiver is interested in the object that was changed. If the system finds an appropriate receiver, the system creates change pointers in the BDCP table that point to change documents in the CDHDR table.
The ALE programs analyze change pointers and generate IDocs. SAP provides
standard function modules that read the change pointer table and generate IDocs for the objects that were changed. These programs are designed to ignore multiple changes and create only one IDoc. For example, if a material is changed four times before the function module is invoked, only one IDoc with the latest data from the material master data is created. The function modules are invoked by a standard report, RBDMIDOC. The selection parameters of this report allow you to specify the message type for which change pointers are to be analyzed. Configuration
you must carry out the following configuration steps to enable master data
distribution based on changes to the object.
Step 1: Enable Change Pointers Globally
Transaction: BD61
This option enables the change pointer process globally. Make sure that the flag is checked.
Step 2 :Enable Change Pointers for a Message Type
Transaction: BD50
This setting is required for activating change pointers for a specific message type.
make sure that the Active flag is checked for your message type.
Step 3 :Specify the Fields for Which Change Pointers Are to Be Written
Transaction: BD52
For standard master data objects such as the material, customer, and vendor objects, SAP already provides a list of fields for which change pointers are written. If you are satisfied with the standard set of fields, you can skip this step. If you want to add new fields, you must add entries for the required fields. If you are not interested in IDocs being generated for changes to a particular field, you can remove it from the list. For example, if you do not want to distribute the
material master for changes made to the Catalog Profile (RBNRM) field, you can delete this entry from the table.
Step 4: Changing a Field in the Master Data
Change a field in the master data object for which the change pointer is enabled. For example, if you change the net weight of a material in the material master data, a change pointer is written.
Tip : You can verify a change document and change pointer by viewing entries in
tables CDHDR and BDCP, respectively.
Step 5 :Executing Program RBDMIDOC to Process Change Pointers
Execute program RBDMIDOC to initiate the process of generating an IDoc. On the selection screen, specify the message type. For example, you can specify MATMAS. After you execute the process, it displays the number of entries processed.
Note :
Normally, you schedule this program to run frequently and start IDoc
generation for different message types.
Step 6 : View the idocs in WE02/05

Fastpath and other request regarding 21CN.

Similar Messages

Maybe you are looking for