FastRes 600 and FastRes 1200

I have HP LaserJet P1102. Why my FastRes 1200 is paler/whiter than my FastRes 600? Is there something wrong with my printer configuration? Does anyone experiencing the same?

Hi whitefences,
If you have uninstalled and reinstalled the software and drivers try following the steps in this document for Troubleshooting Print Quality Issues. Then follow step one in the Configuration Page document from above. If it prints properly its not a toner or software issue with the unit, it would be driver related. Try Uninstalling the Printer Software and then download the HP LaserJet Full Feature Software and Driver and install this.
Let me know how it goes.
Thank you,
I worked on behalf of HP.

Similar Messages

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I have a backup from about 4-5 months ago avaiable. Can I add/update contacts from the back up rather than restore which i assume will literally delete any new contacts added...?

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable. I have a backup from about 4-5 months ago available on an external hdd as a time machine backup. Can I add/update contacts from the back up rather than restore? The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings. They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with. Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts. This is the work of facebook not mac/ios6 isnt it...? Any help here would be greatly apprecaited. I am about 2 days from flying to canada and having those contacts would make life a lot easier.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

Hi everyone, i got my 5S in Macedonia for 600 € and someone who lives in Germany tell me about my iPhone that is not as good as 5S's that have been produced for Germany or in any state like Germany , does it mean that is not original someone to help me ?

Hi everyone, i got my iPhone 5S in Macedonia for 600 € and someone who lives in Germany tells me that my iPhone is not as good as 5S's that have been produced for Germany or in any state like Germany , does it mean that is not original someone to help me ?

All iPhones are manufactured in the same factory in China, all are the same quality for every country of sale.
But the LTE/4G bands are different for different countries so may not work back in Germany. In addition, the warranty is only valid in the country of sale, so you will not have warranty support in Germany...unless Macedonia is part of the EU and then the warranty is valid for all EU states.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7. before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section in the recording tab it is written that microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

Try to disable transparency in Windows, see:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency" 
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

600 and 600e modem problem, and BIOS update

I hope I can find the answers to my 600 and 600e problems here. I've looked over the whole community and can't find the answer to my problems.
BIOS Problem: For some reason I can't update the bios on either machine. I am upgrading from 98 to 2000. I believe I need spsdib54 as a BIOS update. I find IBM laptops rather difficult to update. I have worked on a few computers in my day, but never IBM until now, and the learning curve is hell. I have a floppy drive but can't get the laptop to allow the spsdib54 file to open. I get a remove media message and then hit any key to continue. I'm lost here.and theIBM instructions are no help
MODEM Problem. I am trying to use AOL dialup. I install 2000, and can test my modem on both machines. I install AOL with no problems. Both laptops will dial out and get the correct Phone numbers. When I let AOL use smart connect and try to proceed, I loose all modem activity, and can't get it back even with the Modem upgrade which I have done. ....help

Thomasrwahl wrote:
I hope I can find the answers to my 600 and 600e problems here. I've looked over the whole community and can't find the answer to my problems.
BIOS Problem: For some reason I can't update the bios on either machine. I am upgrading from 98 to 2000. I believe I need spsdib54 as a BIOS update. I find IBM laptops rather difficult to update. I have worked on a few computers in my day, but never IBM until now, and the learning curve is hell. I have a floppy drive but can't get the laptop to allow the spsdib54 file to open. I get a remove media message and then hit any key to continue. I'm lost here.and theIBM instructions are no help
I. Create a System Program Service Diskette:
Download spsdib54.exe (TP 600E: spsdih47.exe or spsdin36.exe - find out here) to your desktop.
Insert a high density floppy disk into the diskette drive.
Double-click the downloaded exe and follow the instructions on the screen.
II. Follow the "Installation Instructions" in spsdib54.txt to update the BIOS:
Installation Instructions
Notes: - You need an AC adapter and a charged battery pack to update
              the system program.
          - If your computer is attached to any kinds of Docking station
             or port replicator, turn off the computer and detach it
            before proceeding.
            - Make sure the SPSD diskette is write protected.
1. Print these instructions or display on another computer.
2. Firmly connect the AC adapter to the computer.
3. Insert the System Program Service Diskette into the diskette drive
    and turn on the computer.
4. Select Read this first from the menu and carefully read the
    information that appears.
5. Press the Esc key to return to the menu.
6. Select Update system program and follow the instruction on
    the screen.
    Warning: Do not turn off or suspend the computer until the update
                   has been completed. IF YOU TURN OFF OR SUSPEND THE
                  COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE
                  SYSTEM BOARD MAY HAVE TO BE REPLACED.
After the update has been completed, do the following to make the
changes effective.
7. Make sure the System Program Service Diskette is removed from
     the diskette drive, then turn off the computer.
8. Press and hold the F1 key, then turn on the computer. Hold the F1
     key until the Easy-Setup menu appears.
9. If a password prompt appears, type the correct password.
10. Select Config, then select Initialize.
11. Select OK to initialize the system.
Run the diagnostics to make sure that the computer runs with no
errors:
12. Turn off the computer, press and hold the F1 key, then turn on
     the computer. Hold the F1 key until the Easy-Setup menu appears.
13. Select Test, then select Start to run all the basic tests.
    Various test patterns will appear on the screen.
     An OK will appear for each device that passes the test.
14. Verify that OK appears for all of the devices tested.
15. Press the Esc key to exit Test and turn off the computer.

Got String= "100 600" and want to get out (length of first number not const

Ive got String= "100 600" and want to get out
the value 600 into int.
Length of first number is not const : it can be 100 or 3000
How can how do it ?
10x for the help

It would depend on the format of your string. If you can gurantee that the format will always be "number number" then you can use the StringTokenizer to split the two numbers and take the second one. The code would look similar to this:
String s = "100 600";
StringTokenizer st = new StringTokenizer(s, " ");
//--- This "scrolls" past the first number.
st.nextToken();
String num = st.nextToken();
The variable num will always have the second number.
Hope this helps.

Difference between SAP ESS 600 and BP ERP05 ESS 1.0

Hello,
could someone explain me the difference between SAP ESS 600 and BP ERP05 ESS 1.0, please?
Thank you, Maximilian

Hi,
BP ERP05 ESS 1.0 ->
Each Business Package (BP) has its own subfolder that contains the required file. Independently of the Business Package you want to implement, you must also implement the Business Package BP ERP05 Common parts
SAP ESS 600
This component is used for XSS self Services
Regards
Vijay

(Linecard image not present) at WS-SSC-600 and 7600-SIP-400

i install two modules WS-SSC-600 and 7600-SIP-400 in slot 5 and 6 in 13-slot chassis and give this output from show power (Linecard image not present)
for both cards.
supervisor engine is : VS-S720-10G with sub-module VS-F6K-PFC3CXL and VS-F6K-MSFC3
IOS : s72033-advipservicesk9-mz.122-33.SXI9
what that mean and how to fix it ?

Ok problem solved by upgrade ios to another version but the new image must contains (_wan) in image name for example (
s72033-advipservicesk9_wan-mz.122-33.SXJ6 ) otherwise the two modules will not powered up.

Environments for Roland G-600 and G-70 arrangers

I just want to figure out how can I send each track from my arrangers to different tracks in Logic pro.
I am able to send midi, but when I play it back the sounds are way different than the sound I hear when I recorded it.
Looks like midi map issue. I dont mind if I dont have the names of the sounds (for now) but I want to be able to send all the instruments I used (base, drums and melody) and play them back the way I recorded. That way I can edit them using the midi window.
Thank you.

Anyone Please...
I know G-600 and G-70 are not a very known keyboards, but some one should have done what I need. I am not an expert on midi, but doing what I want with these 2 keyboard will help me do my projects quicker. Thank you in advance.

SNP Optimizer Read Error Error id : 600 and Error id : 812

Hi All,
I am rebuilding my SNP in a new SCM environment. I have transfered my PDS's and WorkCenters/Capacity via the CIF. These appear fine when I display and have performed the LC Check for the resouces using the TOOLS at /n/sapapo/res01 tcode but all appeared green. I am using standard Hierachies and think they are fine and assigned to the Planning area correctly.
When I press the "oprimizer" ...It runns until it gets to the "Loading Planning Data" then it fails with a "Error when Reading Planning Data" and "Optimizer: an internal error occured". This error occurs very quick once it starts this process and complexity does not seem to matter.
When lookinjg at the Trace File of the log I see the below activity that seems to be the cause but I do not know what the errors mean or where to reference them? Has anyone else encountered this previousluy or know where can investigate this further. Any help or directions on Error id : 600 and Error id : 812 would be great!
Thanks in advance for all your assistance in this!
===
 19.04.2011 19:04:39 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 801 to OutputInterface from []
 19.04.2011 19:04:40 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 19.04.2011 19:04:41 snpopsvr_script.cpp(176) 'SuperVisor' Running in 700 data version mode...
 19.04.2011 19:04:41 snpopsvr_script.cpp(862) 'SuperVisor' Interpreted run time limitation as minimum run time (300 sec.), set run time limitation to 900 seconds.
 19.04.2011 19:04:41 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 803 to OutputInterface from []
 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->init
 19.04.2011 19:04:43 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'SNPRModelGenerator' [6]->init = success [ctx size : 0]
 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->download
 19.04.2011 19:04:43 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/MSDP_OPT_UPLOAD
<e> 19.04.2011 19:04:53 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
 RFC_RC (RFC_EXCEPTION) Exception raised
 RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
 key=ERROR
 message=ERROR
 exception=ERROR
 19.04.2011 19:04:53 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
 19.04.2011 19:04:55 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
 19.04.2011 19:04:56 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_linuxx86_64 = 79488
[CHECK_LOWERBOUND]
 19.04.2011 19:04:56 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
SNP BuildMode Release
SNP Runtime requested 900
tracefile optsvr_trace20110419_190439_2e12.log
 19.04.2011 19:04:56 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
 19.04.2011 19:04:56 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 19.04.2011 19:04:56 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...

Thanks for the reply...
I was able to manually enter and save an SNP planned order via the planning book.
I have failures where my Input material is UOM=TON and Output is UOM=TON and also where input is UOM=TON and output is UOM=KG. I am able to switch between these UOM's in the planning book and product view.
When I have DEBUG2 on via OPT10 I see:
Message Log:
Input parameters
Customizing Settings
Active BAdI Implementations
Step 1: Data read and model creation started at 16:36:35 on 04/22/2011
Runtime 00:00:00 to measuring point Step_1_Start
Runtime 00:00:01 to measuring point Initializations
Runtime 00:00:00 to measuring point Arc_Read
Runtime 00:00:01 to measuring point SNP_Planed_Order_Deletion
Runtime 00:00:00 to measuring point Procurment_and_Transport_Order_Deletion
Runtime 00:00:00 to measuring point Arcmat_Read
Error occurred when reading data
Trace File:
<1> 22.04.2011 16:36:36 rfc_connection.cpp(631) 'MsgMgr' <rfc> RfcCall for /SAPAPO/MSDP_OPT_UPLOAD
<1> 22.04.2011 16:36:36 rfc_connection.cpp(640) 'MsgMgr' <rfc> RfcReceive for /SAPAPO/MSDP_OPT_UPLOAD
<2> 22.04.2011 16:36:38 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:40 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:42 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<e> 22.04.2011 16:36:43 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
 RFC_RC (RFC_EXCEPTION) Exception raised
 RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
 key=ERROR
 message=ERROR
 exception=ERROR
 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
 22.04.2011 16:36:43 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
Thanks again!

Upgrading to Windows 8.1 and Laserjet 1200 becomes an unknown device

Here at work we still have some "old" printers working locally on some laptops.
Recently we performed an upgrade of all our 8.0 devices to 8.1.
After the upgrade none of the HP Laserjet 1200 printers is functioning.
In the device and printers pane the printer is marked as unkonw, drivers can't be found while using te troubleshooter.
When i search on the hp website, it is suggested to use HP Universal Drivers PCL6 or PS6. I downloaded them both, installed each one after the other followed up with a test. None of the drivers worked. When the installer suggests to connect the printer through USB (normaly it would open a plug&play wizard) nothing happens.
I removed the installations and followed the instruction of someone who claimed to have a working Laserjet1200 on a Win8.1 installation. He suggested to install te DOT4 drivers first, I took the driver from this (http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=fp_109468_2&swEnvOid=4158) page. On that page it's said that the installation is compatible with an 8.1 installation, but when i try to run the .msi a pop-up warns me that it's only win8.0 supported.
So is there anyone who has a working Laserjet 1200 printer through USB on a Windows 8.1 installation?
And how did you realise that?
Thanks in advance,
M.

Hi m0n0cl3,
I looked for the driver for your printer with Windows 8.1 using a USB connection and found this:
http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58928&swLangOid=8&swEnvOid=4158
It looks like Windows 8.1 should be compatible with your printer. Let me know if this solves your problem.
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

Hi! My HP TouchSmart 600 and 610 pc are not working.

Can someone help me? My HP touchsmart 600 wont start then my HP touchsmart 610 is having some failures in its hard drive. Thanks in advance.

Hello RichardRosal,
You’re having some problems with your touch smart computers.
Do a hard reset.
Power off the computer.
Remove the power cable.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
This will test all the hardware in the system and detect any problems.
Let me know how everything goes.
Have a good day.

HP TouchSmart 600 and HP psc 2210 all-in-one printer

Hi SiobhanF,
I just registered and this is my first post.
I recently bought a new PC...an HP TouchSmart 600. My printer is a HP psc 2210 all-in-one. I need advice on whether the two are compatible and if so how to get them working together.
Thank you,
waj

This is likely caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

FastRes 600 and FastRes 1200

Similar Messages

Maybe you are looking for