Fatal error 70: Cannot open calendar database

When I try to start my iPlanet Calendar Server(iCS) 5.0, the following error
occurs:
<P>
Fatal error 70: Cannot open calendar database
When this error occurs, first try to recover the database using the
"csdb" command line
utility. For more information on the
csdb utility, please
refer to the iCS 5.0 documentation at the following URL:
<P>
http://docs.iplanet.com/docs/manuals/calendar/ics50/ag/calagxa.htm#13586
<P>
If you are unable to recover the database using the
csdb utility, use the
following steps:
<OL>
<LI>Completely shut down the calendar server to ensure that there are no
stray calendar processes still running.
<P>
<LI>Change directory to your iCS database directory (the default directory
on Solaris is
/var/opt/SUNWics5/csdb/).
<P>
cd /var/opt/SUNWics5/csdb/
<P>
<LI>Create a temp
directory.
<P>
mkdir temp
<P>
<LI>Move all of the
*.share files to the
temp directory.
<P>
mv *.share temp/
<P>
<LI>Restart the calendar server.
<P>
<B>Note:</B> The *.share
files will be rebuilt upon startup.
</OL>
<P>

theFatal error 70: Cannot open calendar database error can occur after a migration from Netscape calendar server, using the ncs4migrate utility.
The problem can be that the log* files in the csdb folder (or wherever you put the calendar database) are not owned by the same user that runs the calendar server - commonly called icsuser.
ie.
-rw-r----- 1 root other 5499425 Jun 25 14:17 log.0000000142
will cause fatal error 70:
change the owner, thus
-rw-r----- 1 icsuser2 icsgroup2 5499425 Jun 25 14:17 log.0000000142
and it should work!
Regards,
- jd

Similar Messages

  • Fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory

    Hi Folks:
    I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
    Could anyone help me out of that ??
    Thanks in advance !

    This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
    #import tlbid(2)
    In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
    #import "TsAdpApi.tlb"

  • Error     1     fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory     C

    Newbie to VC++
    Getting the below error in VC++ 2005, Indesign CS4
    1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
    1>Performing Custom Build Step
    1>Compiling...
    1>WFPNoStrip.cpp
    1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
    1>WFPID.cpp
    1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
    1>VCPlugInHeaders.cpp
    1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
    1>TriggerResourceDeps.cpp
    1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
    1>SDKPlugInEntrypoint.cpp
    1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
    1>Generating Code...
    1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
    1>WriteFishPrice - 5 error(s), 0 warning(s)
    ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
    I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
    Regards,
    Suresh

    Neither the first not the second one:
    am using the following path:
    C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
    Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
    Getting the following error:
    fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
    Don't understand the concept one error leading to the other error.
    How to come out of these kind of problem.
    Regards,
    Suresh

  • Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB

    Hi,
    May be it is because it appears twice on your script :
    OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    At 18:40 18/12/98 +0100, Herv&eacute; Depoorter wrote:
    Hello, everybody.
    My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
    Somebody can help me?
    Thanks a lot for your assistance.
    >
    I tried to passe a C structure between Forte and C.
    I taked the exemple of fort&eacute; : technote ID : 10637.
    We use Forte 3.0.j.1 and I try the example on a NT4 server.
    There are several projects that make up this application. They are asfollows:
    StructExampleGUI - This is this project. It is the GUI front
    (File: StructGu.Pex) end that calls the C wrapper.
    StructSharedObjects - This project defines the Employee object
    (File: StructSh.Pex) that is needed for both the GUI and
    for the StructExampleServices project.
    StructExampleServices - This project defines the StructExample
    (File: StructSO.Pex) services object. This is a restricted
    project whose purpose is to actually call
    the C project.
    StructExampleProject - This is the External C Project that defines
    (File: Struct.Pex) the interface necessary for Forte to generate
    the wrapper code needed to call the C file.
    StructEX.c - This is the C code that is being wrappered. It
    has one function getemployee that modifies an
    input output structure. The memory allocation is
    done by Forte in the StructExampleServices
    project.
    >
    First of all, I compile the StructEx.C
    After, in the Struct.pex, I set the parameter :
    HAS PROPERTY
    CompatibilityLevel = 0;
    ProjectType = LIBRARY;
    Restricted = TRUE;
    MultiThreaded = TRUE;
    LibraryName = 'struct';
    extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
    e:/Pgmprod/cpp/50/lib',
    ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
    I load the struct.pex.
    Double click on the StructExampleProject
    File:Configure As:Library
    Make distibution and select Full make, Install in current Environment & Auto
    Compile
    When I tried this in the first time, I has a probleme with struct.bom. I
    resolved
    that. (technote 11431:Autocompile on NT fails to build the compiled
    partition)
    >
    But now, I'm another problem (see below) and I don't find the solution.
    Somebody can help me? Thanks a lot for your assistance.
    The problem : Fort&eacute; say 'fatal error LNK1181: cannot open input file
    "OLDNAMES.LIB"'
    BEGIN FILE
    Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
    Processing BOM file: struct.bom
    Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
    Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
    struct.cc
    Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
    Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
    /DLL /NOD
    /OUT:struct.dll
    /DEF:struct.nti
    struct.obj
    O:\Herve\ForteAPI\structex.obj
    e:\pgmprod\forte\30J1\install\lib\qqsm.lib
    e:\pgmprod\forte\30J1\install\lib\qqfo.lib
    e:\pgmprod\forte\30J1\install\lib\qqdo.lib
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    e:\pgmprod\forte\30J1\install\lib\qqcm.lib
    e:\pgmprod\forte\30J1\install\lib\qqkn.lib
    e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
    COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
    LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
    cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
    /DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
    /Ie:\pgmprod\forte\30J1\install\inc\os
    /Ie:\pgmprod\forte\30J1\install\inc\ds
    /Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
    /Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
    link @linkopt.lrf
    Error during compilation, aborting.
    END FILE
    Completed compilation for PC NT.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
    Lauren Foutz

  • Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply

    The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
    Regards
    Mark Carruthers
    20th Century Fox
    Herv&eacute; Depoorter <[email protected]> 12/18/98 09:40am >>>
    Hello, everybody.
    My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
    Somebody can help me?
    Thanks a lot for your assistance.
    I tried to passe a C structure between Forte and C.
    I taked the exemple of fort&eacute; : technote ID : 10637.
    We use Forte 3.0.j.1 and I try the example on a NT4 server.
    There are several projects that make up this application. They are as follows:
    StructExampleGUI - This is this project. It is the GUI front
    (File: StructGu.Pex) end that calls the C wrapper.
    StructSharedObjects - This project defines the Employee object
    (File: StructSh.Pex) that is needed for both the GUI and
    for the StructExampleServices project.
    StructExampleServices - This project defines the StructExample
    (File: StructSO.Pex) services object. This is a restricted
    project whose purpose is to actually call
    the C project.
    StructExampleProject - This is the External C Project that defines
    (File: Struct.Pex) the interface necessary for Forte to generate
    the wrapper code needed to call the C file.
    StructEX.c - This is the C code that is being wrappered. It
    has one function getemployee that modifies an
    input output structure. The memory allocation is
    done by Forte in the StructExampleServices
    project.
    First of all, I compile the StructEx.C
    After, in the Struct.pex, I set the parameter :
    HAS PROPERTY
    CompatibilityLevel = 0;
    ProjectType = LIBRARY;
    Restricted = TRUE;
    MultiThreaded = TRUE;
    LibraryName = 'struct';
    extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
    e:/Pgmprod/cpp/50/lib',
    ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
    I load the struct.pex.
    Double click on the StructExampleProject
    File:Configure As:Library
    Make distibution and select Full make, Install in current Environment & Auto
    Compile
    When I tried this in the first time, I has a probleme with struct.bom. I
    resolved
    that. (technote 11431:Autocompile on NT fails to build the compiled partition)
    But now, I'm another problem (see below) and I don't find the solution.
    Somebody can help me? Thanks a lot for your assistance.
    The problem : Fort&eacute; say 'fatal error LNK1181: cannot open input file
    "OLDNAMES.LIB"'
    BEGIN FILE
    Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
    Processing BOM file: struct.bom
    Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
    Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
    struct.cc
    Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
    Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
    /DLL /NOD
    /OUT:struct.dll
    /DEF:struct.nti
    struct.obj
    O:\Herve\ForteAPI\structex.obj
    e:\pgmprod\forte\30J1\install\lib\qqsm.lib
    e:\pgmprod\forte\30J1\install\lib\qqfo.lib
    e:\pgmprod\forte\30J1\install\lib\qqdo.lib
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    e:\pgmprod\forte\30J1\install\lib\qqcm.lib
    e:\pgmprod\forte\30J1\install\lib\qqkn.lib
    e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
    COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
    LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
    cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
    /DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
    /Ie:\pgmprod\forte\30J1\install\inc\os
    /Ie:\pgmprod\forte\30J1\install\inc\ds
    /Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
    /Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
    link @linkopt.lrf
    Error during compilation, aborting.
    END FILE
    Completed compilation for PC NT.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
    Lauren Foutz

  • Fatal error LNK1181: cannot open input file"OLDNAMES.LIB

    Hello, everybody.
    My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
    Somebody can help me?
    Thanks a lot for your assistance.
    I tried to passe a C structure between Forte and C.
    I taked the exemple of fort&eacute; : technote ID : 10637.
    We use Forte 3.0.j.1 and I try the example on a NT4 server.
    There are several projects that make up this application. They are as follows:
    StructExampleGUI - This is this project. It is the GUI front
    (File: StructGu.Pex) end that calls the C wrapper.
    StructSharedObjects - This project defines the Employee object
    (File: StructSh.Pex) that is needed for both the GUI and
    for the StructExampleServices project.
    StructExampleServices - This project defines the StructExample
    (File: StructSO.Pex) services object. This is a restricted
    project whose purpose is to actually call
    the C project.
    StructExampleProject - This is the External C Project that defines
    (File: Struct.Pex) the interface necessary for Forte to generate
    the wrapper code needed to call the C file.
    StructEX.c - This is the C code that is being wrappered. It
    has one function getemployee that modifies an
    input output structure. The memory allocation is
    done by Forte in the StructExampleServices
    project.
    First of all, I compile the StructEx.C
    After, in the Struct.pex, I set the parameter :
    HAS PROPERTY
    CompatibilityLevel = 0;
    ProjectType = LIBRARY;
    Restricted = TRUE;
    MultiThreaded = TRUE;
    LibraryName = 'struct';
    extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
    e:/Pgmprod/cpp/50/lib',
    ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
    I load the struct.pex.
    Double click on the StructExampleProject
    File:Configure As:Library
    Make distibution and select Full make, Install in current Environment & Auto
    Compile
    When I tried this in the first time, I has a probleme with struct.bom. I
    resolved
    that. (technote 11431:Autocompile on NT fails to build the compiled partition)
    But now, I'm another problem (see below) and I don't find the solution.
    Somebody can help me? Thanks a lot for your assistance.
    The problem : Fort&eacute; say 'fatal error LNK1181: cannot open input file
    "OLDNAMES.LIB"'
    BEGIN FILE
    Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
    Processing BOM file: struct.bom
    Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
    Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
    struct.cc
    Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
    Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
    /DLL /NOD
    /OUT:struct.dll
    /DEF:struct.nti
    struct.obj
    O:\Herve\ForteAPI\structex.obj
    e:\pgmprod\forte\30J1\install\lib\qqsm.lib
    e:\pgmprod\forte\30J1\install\lib\qqfo.lib
    e:\pgmprod\forte\30J1\install\lib\qqdo.lib
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    e:\pgmprod\forte\30J1\install\lib\qqcm.lib
    e:\pgmprod\forte\30J1\install\lib\qqkn.lib
    e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
    e:\pgmprod\forte\30J1\install\lib\qqsh.lib
    OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
    COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
    LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
    cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
    /DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
    /Ie:\pgmprod\forte\30J1\install\inc\os
    /Ie:\pgmprod\forte\30J1\install\inc\ds
    /Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
    /Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
    link @linkopt.lrf
    Error during compilation, aborting.
    END FILE
    Completed compilation for PC NT.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hussein,
    Please find below the requested information,
    1. Path variable value after sourcing the apps env file,
    D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
    ECHO is off.
    ECHO is off.
    Tue 11/23/2010 02:36 PM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual Studio 2008 x86 tools.
    APPSORA.cmd exiting with status 0
    D:\oracle\VIS\apps\apps_st\appl>
    D:\oracle\VIS\apps\apps_st\appl>echo %path%
    C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
    oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
    C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
    ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
    oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
    sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
    ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
    \tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
    \VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
    util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
    \tech_st\10.1.3\ant\bin
    D:\oracle\VIS\apps\apps_st\appl>
    2. gnumake version is as follows,
    D:\oracle\VIS\apps\apps_st\appl>gnumake --version
    GNU Make 3.81
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
    PARTICULAR PURPOSE.
    This program built for i386-pc-mingw32
    D:\oracle\VIS\apps\apps_st\appl>
    Thanks,
    Rajesh.

  • Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

    I am having a application in Visual Studio 2003 on Windows XP  , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
    In my Development PC , I was install Measurement Studio 2009 ,  NI DAQ 7.01 and Field Point 6.05.
    my application is Showing following error:
    Linking...
    LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
    Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
    NICfpDAQDll - 1 error(s), 0 warning(s)
    When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
    my application is Showing following error:
    1>Linking...
    1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
    1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
    1>   Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
    1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
    I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
    In the project Setting I am done following setting:
    "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
    C:\Program Files\National Instruments\NI-DAQ\Lib"
    Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
    Please provide some solution.
    Thanks
    Nityanand

    You posted this in the LabVIEW forum.
    Are you programming in LabVIEW?
    There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

  • Unable to Build VC++ applicatio​n it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPo​int71D.lib​' but I am Using Measuremen​t Studio 2009

    I am Migrating a application in Visual Studio 2005.
    In my development PC I was install the Measurement Studio 2009
    my application is Showing following error:
    1>Linking...
    1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
    1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
    1>NICfpDAQDll - 1 error(s), 0 warning(s)
    In the project Setting I am done following setting
    "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
    C:\Program Files\National Instruments\NI-DAQ\Lib"
    but in  "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"  directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
    Please provide some solution.
    Thanks
    Nityanand

    You posted this in the LabVIEW forum.
    Are you programming in LabVIEW?
    There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

  • Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

    I am Migrating a application in Visual Studio 2005.
    In my development PC I install the Measurement Studio 2005.
    my application is Showing following error:
    1>Linking...
    1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
    1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
    1>NICfpDAQDll - 1 error(s), 0 warning(s)
    In the project Setting I am done following setting
    "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
    C:\Program Files\National Instruments\NI-DAQ\Lib"
    but in  "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"  directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
    Please provide some solution.
    Thanks
    Nityanand

    You posted this in the LabVIEW forum.
    Are you programming in LabVIEW?
    There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

  • Fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory

    I have a old source code that are using Measurement Studio I try to compile to do some modifications to the old source code but I have the next Compiler error "C:\Program Files\National Instruments\MeasurementStudio\VC\Include\NiColorVector.h(24) : fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory" I install the Measurement Studio 2015 try to fixed the error but I can't If I search the NiVector.h I can't find it something can help me please I need the NIVector.h file
    Thank you.

    In Visual C++ you have to go to the Tools menu and select Options... then on the Directories tab you have to add for Include files both the jdk\include AND jdk\include\win to the list of directories and then there will be no problem finding the header files.

  • Plugin development for premiere, adobe example  error LNK1104: cannot open file 'C:\Program Files\Ad

    Hello,
    I downloaded the Premiere Pro CS 5.5 Win SDK, i open the project SDK_Exporter in Visual Studio 2008, when i hit debug i get the following error
    Error
    1
    fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\ExporterSDK.prm'
    How can i resolve ?

    RESOLVED LOOKING AT THE PAST
    1.Zac Lam,01-dic-2013 10:43   in reply to Alex B MartinReport 
    Hi Alex, Are you launching Visual Studio with administrative privileges?  If not, you won’t be able to generate the .aex in certain protected folders because of a Windows security restriction.
    Was this helpful? Yes   No
    Reply 
    |Mark as:
    Unmark as Correct 
    |Translate
    7 posts
    03-ene-2013 
    2.Alex B Martin,01-dic-2013 12:34   in reply to Zac Lam 
    Yes it works, thanks Note: For CS 5.5 Administrative privileges are not need, so thats only with visual studio 2010 and premiere cs6 where i need to run vs2010 as admin.

  • Warning D4024: unrecognized source file type ' ■/', object file assumed and error LNK1181: cannot open input file 'ÿþ/.obj'

    Hi, i just installed the Visual Studio Community 2013 update 4 and after i began making a class i got this error. 
    Any ideas as to how i could fix this problem?

    Hi runy385,
    Do you get any error when you install vs 2013? Do you have any version vs installed on your machine? Does VS install in C: or D: ? Please first try to repair and re-install VS 2013. If this is not working , Please refer to this thread.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/829bf89b-8693-409e-9907-d5debef42a9f/link-fatal-error-lnk1181-cannot-open-input-file-obj?forum=vcgeneral
    Read this thread, I guess this issue may because the VS uses the wrong version cl.exe. Please try the solution in above thread and remember to make a backup.
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Fatal error : can not open file 'msvcrt.lib'

    Hello dudes !
    I am using windows and jdk1.6. I want to develop one application using JNI. As steps for JNI, i have created Helloworld java class and compiled it, then created header file using jnh. After that i have created HelloWorld.c file.
    To build dll file, i am executing the below command
    "cl -Ic:\java\include -Ic:\java\include\win32 -MD -LD HelloWorld.c -FeHelloWorld.dll".
    Command giving the output as follows:
    HelloWorld.c
    Microsoft (R) Incremental Linker Version 8.00.50727.42
    Copyright (C) Microsoft Corporation. All rights reserved.
    /dll
    /implib:HelloWorld.lib
    /out:HelloWorld.dll
    HelloWorld.obj
    LINK : fatal error LNK1104: cannot open file 'MSVCRT.lib'
    Can anybody say why it is giving this problem.
    Also i tried giving the msvcrt.lib path as the value for -MD option,
    cl -Ic:\java\include -Ic:\java\include\win32 -MD"c:\Microsoft Visual Studio 8\VC\lib" -LD HelloWorld.c -FeHelloWorld.dll
    Then it is giving "can not open file LIBCMT.lib" .
    Note : ...\VC\lib and ....\VC\include are added in the path.
    Can anybody tell the solution for this ?
    Thanks in advance!!

    Hi,
    I was with the same problem. You have set the your VCC environment.
    Path, Include and Lib.
    In your directory VCC (2003 toolkit), you have a .bat file (vcvars32.bat)
    Run the bat, or copy and past this command in your command prompt.
    In my compilation, I run the code, wihtout -MD and -LF. In your, just:
    cl -Ic:\java\include -Ic:\java\include\win32 HelloWorld.c -FeHelloWorld.dll
    thanks,
    Fabio Pinheiro
    Brasil.

  • Am getting an error when I open Entourage:  "Database Daemon Fatal Error".  Now what?

    Am getting an error when I open Entourage:  "Database Daemon Fatal Error".   Now what?

    Post your question on Microsoft's own forums for their Mac software, as Apple Communities only provide support for Apple products:
    http://answers.microsoft.com/en-us/mac

  • Fatal error 78: Cannot connect to User Group LDAP Server

    After configuring Calendar server when trying to start:
    give following error:
    # ./start-cal
    Restarting calendar services
    Stopping all calendar services
    Starting all calendar services
    # enpd is started
    csnotifyd is started
    csadmind is started
    Fatal error 78: Cannot connect to User Group LDAP Server
    cshttpd is not started
    Calendar service(s) not started
    cshttpd is not started
    Calendar service(s) not started
    Following logs are from http logs of calendar server
    [13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Information: Log created (1095109367)
    [13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: Sun Java System Calendar Server 6 2004Q2 (built Apr 28 2004) cshttpd starting up
    [13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd attempting to open Counters Database
    [13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd successfully opened the Counters Database
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module is refreshing
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshing
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshed
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module has refreshed
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd: argc=3 argv[0]=/opt/SUNWics5/cal/lib/cshttpd
    [13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: attempting to open session database for cshttpd
    [13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: session database open completed for cshttpd
    [13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: Store Critical: Error checking session database: DB->set_alloc: method not permitted in shared environment
    [13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: LdapCacheInit: Ldap Cache not enabled.
    [13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd_parse_commandline: successfully bind process 17916 to processor 0
    [13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Critical: Fatal error 78: Cannot connect to User Group LDAP Server
    Have any body seen this before.
    Regards

    The server was running fine for few months until i restarted the calendar server. i started to see the same error and the problem was the machine name got changed at some point.
    I added the old hostname to the /etc/hosts file and restarted the calender server and it started to work fine.

Maybe you are looking for