Fatal error at printing report

When i add a table with records more than 500 rows to the report and print it to pdf with FreePdfXP, an Error-Dialog shew up with the note " Error: -2147352567 occurred at failed to open printer". After clicking on the button "Stop" an other dialog shew up with "Fatal Internal Error: "drawmgr.cpp", line 3504 LabVIEW Version 7.1". Then the complete Labview programme was shut down.
When the number of the rows doesn't exceed 500, the printing report works without error. But by the second time of printing report the error shew up again when the total rows of records at first and second time of printing report are more than 500.
Can anyone give me some suggestion,  thank you in advance.

Sorry, i have just wanted to change the message subject. but i can't find the edit link.
i guess, this problem would be due to the FreePdfXP-Driver or the Print Report.vi .

Similar Messages

  • Error in Print Report.vi

    I get "Unknown Error in Print Report.vi", error code -2147352567 when I run Text Report Example.vi in LabVIEW 6.1. My own code that ran OK in LabVIEW 6.0.2 also produces this same result in V6.1. I have not changed printers. Help.

    Hi.
    I don't have exact solution for your problem, but it is very familiar to what I experienced.
    I install 6.1 and Report Generation toolkit included with new package. I had all my programs written in 6.0.2 with Report Generation from version 1.0.
    Almost every other VI from Report Generation did not work after I recompiled my VI into Labview 6.1. I spent several days trying to understand what is going on, made several calls to NI tech support, but nobody could help me. Finally I found solution:
    Uninstall New Report Generation toolkit Version 1.0a included into latest package of Labview 6.1 and install the very first version (I have it distributed as separate CD).
    After such maneuver everything works fine.
    I had another problem with this tool and especially Pri
    nt report.vi:
    I have PDS package, and Print report.vi works excellent on my computer printing Standard Report. However when I create stand-alone application and distribute it together with run-time engine on user computers, it gives me error and I can only print creating Excel or Word type of report.
    So, that is my experience. I think NI still has several bugs to work on. And if you find any other solutions, please let me know.
    Good luck.

  • Error when printing reports from forms in Linux

    Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
    The error, in the log from the reports server is:
    [2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
    f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=62204,
    java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
    ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
    java.lang.String moduleName="REP"
    at oracle.reports.utility.Utility.newRWException(Utility.java:604)
    at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
    at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
    at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
    at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
    at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
    at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
    at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
    at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
    at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
    at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
    at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
    at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
    at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
    at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
    [2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
    REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
    ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
    [2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
    [2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
    [2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
    [2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
    [2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
    [2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
    [2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=50125,
    If anyone could help me, is important !
    Thx in advance
    Bruno Santos                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Raise a TAR I reckon

  • Receiving an error in Print Report.vi in the Text Report Example.vi

    I am trying to run the "Text Report Example.vi" example under Windows XP Professional, MS Office 2003 and LV 6.1 and I get an error in the "Print Report.vi" saying that there is an unknown error (-2147452567). I have searched through the Knowledgebase and found a couple of things to try but none of them worked (namely this solution). Is there a known problem with Office 2003 and LabVIEW 6.1? I can run the same example on another computer that is running the same setup except that it has MS Office 2002 SP3 and it prints properly.

    There are several reasons why you could get this error. There was a problem with a DLL change that caused either an invoke node or a property node (sorry, I don't remember which) to need to be replaced or relinked. I think that this is the problem that you linked to.
    The other potential problem is that you could be calling a font that you have on one of the computers but not on the other.
    I hope that this helps,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Error when print report from apex using apex listener 2

    Hi
    Apex 4.2
    I want print report to pdf from apex using apex listener 2.
    The print server 'Oracle APEX listener' has been defined at the instance-level.
    ACL has been configured.
    I attempt to download a report in PDF mode, it appears that it downloads,
    but when I go to open it up I get an error that the file is of the wrong type or possibly corrupt.
    Upon opening the file in Text editor, there is an error as below
    %PDF-1.4
    1 瀛楄妭鐨?UTF-8 搴忓垪鐨勫瓧鑺?1 鏃犳晥銆?

    If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
    LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

  • Fatal Error when exporting Report to Excel

    Hi Everyone, I've been trying to export my report to excel.  But I have exhausted all possible reasons and I just couldn't figure it out.  Can someone please help me.  Thanks in advance.
    PROGRAM NAME :   ZADC_PAYSUMNEW
    REPORT ZADC_PAYSUMNEW
    NO STANDARD PAGE HEADING
                      LINE-SIZE 450
                      LINE-COUNT 65 MESSAGE-ID zmes.
    TABLE DECLARATION                                                   *
    TABLES: cskt,
            csks,
            pa0009,
            pcl1,
            pcl2,
            pernr,
            t512t,
            t549a,
            t527x,
            zhrprtype.
       INFOTYPES DECLARATION
    INFOTYPES: 0001, 0002.
       INCLUDE DECLARATION
    INCLUDE: rpc2rx00.
    INCLUDE: rpc2rxx0.
    INCLUDE: rpppxd00.
       INTERNAL TABLE DECLARATION
    DATA: BEGIN OF itab OCCURS 0,
            khinr LIKE csks-khinr,
            kostl LIKE p0001-kostl,
            ltext(40),
            p_date LIKE pc261-inper,
            basic(7) TYPE p DECIMALS 2,
            pera(7) TYPE p DECIMALS 2,
            longp(7) TYPE p DECIMALS 2,
            trall(6) type p decimals 2,
            srvaw(6) TYPE p DECIMALS 2,
            chall(7) TYPE p DECIMALS 2,
            leave(7) TYPE p DECIMALS 2,
            meal(7) TYPE p DECIMALS 2,
            saldf(7) TYPE p DECIMALS 2,
            sipps(7) TYPE p DECIMALS 2,
            sipgs(7) TYPE p DECIMALS 2,
            subs(7) TYPE p DECIMALS 2,
            hzard(7) TYPE p DECIMALS 2,
            lallw(7) TYPE p DECIMALS 2,
            medps(7) TYPE p DECIMALS 2,
            medgs(7) TYPE p DECIMALS 2,
            pcontps(7) TYPE p DECIMALS 2,
            pcontgs(7) TYPE p DECIMALS 2,
            pagibps(6) TYPE p DECIMALS 2,
            pagibgs(6) TYPE p DECIMALS 2,
            lwop(7) TYPE p DECIMALS 2,
            npay(7) TYPE p DECIMALS 2,
            otime(7) TYPE p DECIMALS 2,
            ec(7) TYPE p DECIMALS 2,
            fr_date like sy-datum,
            to_date like sy-datum,
          END OF itab.
    DATA: BEGIN OF jtab OCCURS 0,
            khinr LIKE csks-khinr,
            kostl LIKE p0001-kostl,
            ltext(40),
            basic(7) TYPE p DECIMALS 2,
            pera(7) TYPE p DECIMALS 2,
            longp(7) TYPE p DECIMALS 2,
            trall(6) type p decimals 2,
            srvaw(6) TYPE p DECIMALS 2,
            chall(7) TYPE p DECIMALS 2,
            leave(7) TYPE p DECIMALS 2,
            meal(7) TYPE p DECIMALS 2,
            saldf(7) TYPE p DECIMALS 2,
            sipps(7) TYPE p DECIMALS 2,
            sipgs(7) TYPE p DECIMALS 2,
            subs(7) TYPE p DECIMALS 2,
            hzard(7) TYPE p DECIMALS 2,
            lallw(7) TYPE p DECIMALS 2,
            medps(7) TYPE p DECIMALS 2,
            medgs(7) TYPE p DECIMALS 2,
            pcontps(7) TYPE p DECIMALS 2,
            pcontgs(7) TYPE p DECIMALS 2,
            pagibps(6) TYPE p DECIMALS 2,
            pagibgs(6) TYPE p DECIMALS 2,
            lwop(7) TYPE p DECIMALS 2,
            npay(7) TYPE p DECIMALS 2,
            otime(7) TYPE p DECIMALS 2,
            ec(7) TYPE p DECIMALS 2,
          END OF jtab.
    DATA: it_list TYPE STANDARD TABLE OF itab   WITH HEADER LINE.
       CONSTANTS DECLARATION
    CONSTANTS: basic  TYPE pc207-lgart VALUE '0401',
               basic2 TYPE pc207-lgart VALUE '0402',
               basic3 TYPE pc207-lgart VALUE '0403',
               PERA   TYPE pc207-lgart VALUE '3104',
               PERA2 TYPE pc207-lgart VALUE '3110',
               longp  TYPE pc207-lgart VALUE '1601',
               longp2 TYPE pc207-lgart VALUE '1603',
               trall  TYPE pc207-lgart VALUE '3109',
               srvaw TYPE pc207-lgart VALUE '2117',
               leave TYPE pc207-lgart VALUE '2118',
               chall  TYPE pc207-lgart VALUE '3105',
               chall2 TYPE pc207-lgart VALUE '3111',
               chall3 TYPE pc207-lgart VALUE '3112',
               meal   TYPE pc207-lgart VALUE '3102',
               saldf  TYPE pc207-lgart VALUE '4103',
               sipps  TYPE pc207-lgart VALUE '/090',
               sipps2 TYPE pc207-lgart VALUE '1121',
               subs   TYPE pc207-lgart VALUE '3101',
               hzard  TYPE pc207-lgart VALUE '1602',
               lallw  TYPE pc207-lgart VALUE '3103',
               medps  TYPE pc207-lgart VALUE '/313',
               medgs  TYPE pc207-lgart VALUE '/314',
               pcontps  TYPE pc207-lgart VALUE '/093',
               pcontps2 TYPE pc207-lgart VALUE '1327',
               pcontps3 TYPE pc207-lgart VALUE '1120',
               pagibps  TYPE pc207-lgart VALUE '/326',
               pagibps2 TYPE pc207-lgart VALUE '1326',
               lwop   TYPE pc207-lgart VALUE '1102',
               otime  TYPE pc207-lgart VALUE '0101',
               otime2 TYPE pc207-lgart VALUE '0102',
               otime3 TYPE pc207-lgart VALUE '0103',
               otime4 TYPE pc207-lgart VALUE '0104',
               npay   TYPE pc207-lgart VALUE '/559'.
       DATA DECLARATION
    DATA: BEGIN OF COMMON PART buffer.
    INCLUDE: rpppxd10.
    DATA: END OF COMMON PART buffer.
    *Table data containing directory to PCL2 payroll results file DATA:
    DATA: BEGIN OF rgdir OCCURS 100.
            INCLUDE STRUCTURE pc261.
    DATA: END OF rgdir.
    DATA: BEGIN OF evpdir OCCURS 100.
            INCLUDE STRUCTURE pc261.
    DATA: END OF evpdir.
    DATA: country LIKE t001p-molga,
          lname LIKE t527x-orgtx,
          filename2(128),
          p_date LIKE pc261-inper,
          w_basic  LIKE pc207-lgart,
          w_basic2 LIKE pc207-lgart,
          w_basic3 LIKE pc207-lgart,
          w_pera LIKE pc207-lgart,
          w_pera2 LIKE pc207-lgart,
          w_longp LIKE pc207-lgart,
          w_longp2 LIKE pc207-lgart,
          w_trall LIKE pc207-lgart,
          w_srvaw LIKE pc207-lgart,
          w_leave LIKE pc207-lgart,
          w_chall LIKE pc207-lgart,
          w_chall2 LIKE pc207-lgart,
          w_chall3 LIKE pc207-lgart,
          w_meal LIKE pc207-lgart,
          w_saldf LIKE pc207-lgart,
          w_sipps LIKE pc207-lgart,
          w_sipps2 LIKE pc207-lgart,
          w_subs LIKE pc207-lgart,
          w_hzard LIKE pc207-lgart,
          w_lallw LIKE pc207-lgart,
          w_medps LIKE pc207-lgart,
          w_medgs LIKE pc207-lgart,
          w_pcontps LIKE pc207-lgart,
          w_pcontps2 LIKE pc207-lgart,
          w_pcontps3 LIKE pc207-lgart,
          w_pagibps LIKE pc207-lgart,
          w_pagibps2 LIKE pc207-lgart,
          w_lwop LIKE pc207-lgart,
          w_otime LIKE pc207-lgart,
          w_otime2 LIKE pc207-lgart,
          w_otime3 LIKE pc207-lgart,
          w_otime4 LIKE pc207-lgart,
          w_npay LIKE pc207-lgart,
          tempgs(7) TYPE p DECIMALS 2,
          ctr-basic(7) TYPE p DECIMALS 2,
          ctr-pera(7) TYPE p DECIMALS 2,
          ctr-longp(7) TYPE p DECIMALS 2,
          ctr-trall(6) TYPE p DECIMALS 2,
          ctr-srvaw(6) TYPE p DECIMALS 2,
          ctr-leave(7) TYPE p DECIMALS 2,
          ctr-chall(7) TYPE p DECIMALS 2,
          ctr-meal(7) TYPE p DECIMALS 2,
          ctr-saldf(7) TYPE p DECIMALS 2,
          ctr-sipps(7) TYPE p DECIMALS 2,
          ctr-sipgs(7) TYPE p DECIMALS 2,
          ctr-subs(7) TYPE p DECIMALS 2,
          ctr-hzard(7) TYPE p DECIMALS 2,
          ctr-lallw(7) TYPE p DECIMALS 2,
          ctr-medps(7) TYPE p DECIMALS 2,
          ctr-medgs(7) TYPE p DECIMALS 2,
          ctr-pcontps(7) TYPE p DECIMALS 2,
          ctr-pcontgs(7) TYPE p DECIMALS 2,
          ctr-pagibps(6) TYPE p DECIMALS 2,
          ctr-pagibgs(6) TYPE p DECIMALS 2,
          ctr-lwop(7) TYPE p DECIMALS 2,
          ctr-otime(7) TYPE p DECIMALS 2,
          ctr-npay(7) TYPE p DECIMALS 2,
          ctr-ec(7) TYPE p DECIMALS 2.
    DATA: BEGIN OF  ph-version.
            INCLUDE STRUCTURE pc201_pay.   "XTWPH9K008656
    DATA: END OF  ph-version.
    DATA: fr_date LIKE sy-datum,
          to_date LIKE sy-datum.
       SELECT-OPTIONS and PARAMETERS
    SELECT-OPTIONS: p_status FOR rgdir-srtza DEFAULT 'A'.
    DATA: DATE1(15),
          mon(9).
       DEFINITION
    DEFINE rp-imp-c2-rx2.
      clear:
        orx-version,                       "OBJECTS_FOR_CLEAR
        rt, rt[].
      import
        ph-version to orx-version          "OBJECTS_FOR_IMPORT
        rt
      from database pcl2(ph) id rx-key using pcl2_exp_imp.
      rp-imp-rx-subrc = sy-subrc.
      if sy-subrc eq 0 and orx-version-number ne ph-version-number.
        rp-imp-rx-subrc = 8.
      endif.
    END-OF-DEFINITION.
    TYPE-POOLS: slis.
    DATA: g_repid LIKE sy-repid,
          gt_fieldcat TYPE slis_t_fieldcat_alv,
          gt_events TYPE slis_t_event,
          gt_top TYPE slis_t_listheader,
          gt_eol TYPE slis_t_listheader,
          gt_list_top_of_page TYPE slis_t_listheader,
          gt_list_end_of_list TYPE slis_t_listheader,
          gs_layout TYPE slis_layout_alv,
          d_f2code LIKE sy-ucomm              VALUE  '&ETA'.
    CONSTANTS: fn_top TYPE slis_formname VALUE 'TOP_OF_PAGE',
               fn_eol TYPE slis_formname VALUE 'END_OF_LIST'.
    DATA: it_alv_out TYPE STANDARD TABLE OF itab WITH HEADER LINE.
    INITIALIZATION.
    g_repid = sy-repid.
    PERFORM f_fieldcat_init USING gt_fieldcat[].
    PERFORM eventtab_build USING gt_events[].
       START-OF-SELECTION.
    START-OF-SELECTION.
    fr_date = to_date = pn-endda.
    fr_date+6(2) = '01'.
      SELECT SINGLE * FROM t549a
         WHERE abkrs = pnpxabkr.
      GET PERNR.
        CLEAR: itab, lname.
        PERFORM get_rt_tab.
    END-OF-SELECTION.
      PERFORM display_grid.
      INCLUDE rpppxm00.
    USING DATM
          FORM get_rt_tab                                               *
    FORM get_rt_tab.
      rp_provide_from_last p0001 space pn-begda pn-endda.
      rp_provide_from_last p0002 space pn-begda pn-endda.
      CALL FUNCTION 'CU_READ_RGDIR'
           EXPORTING
                persnr          = p0001-pernr
           IMPORTING
                molga           = country
           TABLES
                in_rgdir        = rgdir
           EXCEPTIONS
                no_record_found = 1
                OTHERS          = 2.
      IF sy-subrc = 0.
      SELECT single ltext FROM cskt
        INTO itab-ltext
        WHERE kostl = p0001-kostl
          AND datbi = '99991231'.
      SELECT SINGLE * FROM csks
        WHERE kostl = p0001-kostl
          AND kokrs = 'GSIS'
          AND datbi = '99991231'.
      IF sy-subrc = 0.
        MOVE: csks-kostl TO itab-kostl,
              csks-khinr TO itab-khinr.
      ENDIF.
        p_date = pn-paper.
      regular payroll run.
        CALL FUNCTION 'CD_EVALUATION_PERIODS'
             EXPORTING
                  bonus_date      = '00000000'
                  inper_modif     = t549a-permo
                  inper           = p_date
                  pay_type        = ' '
                  pay_ident       = ' '
             TABLES
                  rgdir           = rgdir
                  evpdir          = evpdir
             EXCEPTIONS
                  no_record_found = 1
                  OTHERS          = 2.
        IF sy-subrc = 0.
          LOOP AT evpdir WHERE srtza IN p_status and FPPER eq pn-begda+(6).
            rx-key-pernr = p0001-pernr.
            rx-key-seqno = evpdir-seqnr.
            rp-imp-c2-rx2.
            IF rp-imp-rx-subrc = 0.
              PERFORM rt_to_itab.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDFORM.
          FORM PRINT_RX                                                 *
    FORM print_rx.
      LOOP AT rt.
        PERFORM re512t USING country rt-lgart.
      ENDLOOP.
    ENDFORM.
          FORM RE512T                                                   *
    -->  VALUE(COUNTRY_GROUPING)                                       *
    -->  VALUE(WTYPE)                                                  *
    FORM re512t USING value(country_grouping)
                      value(wtype).
      CHECK t512t-sprsl NE sy-langu
         OR t512t-molga NE country_grouping
         OR t512t-lgart NE wtype.
      SELECT SINGLE * FROM t512t
           WHERE sprsl EQ sy-langu
           AND molga EQ country_grouping
           AND lgart EQ wtype.
      IF sy-subrc NE 0.
        CLEAR t512t.
      ENDIF.
    ENDFORM.
          FORM rt_to_itab                                               *
    FORM rt_to_itab.
      MOVE: basic TO w_basic,
            basic2 TO w_basic2,
            basic3 TO w_basic3,
            pera  TO w_pera,
            pera2 TO w_pera2,
            longp TO w_longp,
            longp2 TO w_longp2,
            srvaw TO w_srvaw,
            leave TO w_leave,
            trall TO w_trall,
            chall TO w_chall,
            chall2 TO w_chall2,
            chall3 TO w_chall3,
            meal  TO w_meal,
            saldf TO w_saldf,
            sipps TO w_sipps,
            sipps2 TO w_sipps2,
            subs  TO w_subs,
            hzard TO w_hzard,
            lallw TO w_lallw,
            medps TO w_medps,
            medgs TO w_medgs,
            pcontps TO w_pcontps,
            pcontps2 TO w_pcontps2,
            pcontps3 TO w_pcontps3,
            pagibps TO w_pagibps,
            pagibps2 TO w_pagibps2,
            LWOP  TO w_lwop,
            otime TO w_otime,
            otime2 TO w_otime2,
            otime3 TO w_otime3,
            otime4 TO w_otime4,
            npay  TO w_npay.
      LOOP AT rt WHERE lgart = w_basic or lgart = w_basic2
                                        or lgart = w_basic3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-basic.
        itab-ec = rt-betrg / 100.
        if itab-ec > 100.
            itab-ec = 100.
        ENDIF.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pera.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pera.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pera2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pera.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_longp or lgart = w_longp2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-longp.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_trall.
        if rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        endif.
        ADD: rt-betrg TO itab-trall.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_srvaw.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-srvaw.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_leave.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-leave.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_chall or
                       lgart = w_chall2 or
                       lgart = w_chall3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-chall.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_meal.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-meal.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_saldf.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-saldf.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_sipps or
                       lgart = w_sipps2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-sipps.
        itab-sipgs = itab-sipps / 9 * 12.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_subs.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-subs.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_hzard.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-hzard.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_lallw.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-lallw.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_medps.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-medps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_medgs.
          IF rt-betrg < 0.
            rt-betrg = abs( rt-betrg ).
          ENDIF.
          MOVE: rt-betrg TO tempgs.
          itab-medgs = itab-medps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pcontps OR
                       lgart = w_pcontps2 OR
                       lgart = w_pcontps3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pcontps.
      ENDLOOP.
      itab-pcontgs = itab-pcontps * 9.
      LOOP AT rt WHERE lgart = w_pagibps OR
                       lgart = w_pagibps2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pagibps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pagibps.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pagibgs.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_lwop.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-lwop.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_otime or
                       lgart = w_otime2 or
                       lgart = w_otime3 or
                       lgart = w_otime4.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-otime.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_npay.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-npay.
      ENDLOOP.
      COLLECT itab.
      CLEAR: itab.
      REFRESH rt.
    ENDFORM.                               " rt_to_itab
    *&      Form  f_fieldcat_init
          text
         -->P_GT_FIELDCAT[]  text
    FORM f_fieldcat_init USING rt_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: ls_fieldcat TYPE slis_fieldcat_alv.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   1.
      ls_fieldcat-reptext_ddic    =  ' FXNAL Group'.
      ls_fieldcat-fieldname       =  'KHINR'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  12.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   2.
      ls_fieldcat-reptext_ddic    =  ' OFFICE'.
      ls_fieldcat-fieldname       =  'LTEXT'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  40.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   3.
      ls_fieldcat-reptext_ddic    =  ' RC #'.
      ls_fieldcat-fieldname       =  'KOSTL'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  5.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos           =   4.
      ls_fieldcat-reptext_ddic      =  'Basic Salary'.
      ls_fieldcat-tabname           =  'ITAB'.
      ls_fieldcat-fieldname         =  'BASIC'.
      ls_fieldcat-datatype          = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   5.
      ls_fieldcat-reptext_ddic      =  'PERA Allow'.
      ls_fieldcat-tabname           =  'ITAB'.
      ls_fieldcat-fieldname         =  'PERA'.
      ls_fieldcat-datatype          =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   6.
      ls_fieldcat-reptext_ddic    =  'Longevity Pay'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LONGP'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   7.
      ls_fieldcat-reptext_ddic    =  'Service Award'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SRVAW'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   8.
      ls_fieldcat-reptext_ddic    =  'Child Allowance'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'CHALL'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   9.
      ls_fieldcat-reptext_ddic    =  'Leave Mone'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LEAVE'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   10.
      ls_fieldcat-reptext_ddic    =  'Over-time'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'OTIME'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   11.
      ls_fieldcat-reptext_ddic    =  'Meal Subsidy'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'MEAL'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   12.
      ls_fieldcat-reptext_ddic    =  'Salary Diff.'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SALDF'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   13.
      ls_fieldcat-reptext_ddic    =  'Subsistence'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SUBS'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   14.
      ls_fieldcat-reptext_ddic    =  'Hazard Pay'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'HZARD'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   15.
      ls_fieldcat-reptext_ddic    =  'Laundry Allow'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LALLW'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
    ENDFORM.                    " f_fieldcat_init
    *&      Form  display_grid
          text
    -->  p1        text
    <--  p2        text
    FORM display_grid.
      SORT itab BY kostl khinr.
      LOOP AT itab.
        AT NEW khinr.
          MOVE-CORRESPONDING itab TO jtab.
          APPEND jtab.
        ENDAT.
      ENDLOOP.
      PERFORM my_top USING gt_top[].
      PERFORM build_layout USING gs_layout.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = g_repid
          is_layout          = gs_layout
          it_fieldcat        = gt_fieldcat[]
          it_events          = gt_events[]
        TABLES
          t_outtab           = itab.
    ENDFORM.                    " display_grid
    *&      Form  eventtab_build
          text
         -->P_GT_EVENTS[]  text
    FORM EVENTTAB_BUILD USING my_events TYPE SLIS_T_EVENT.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                i_list_type = 1
           IMPORTING
                et_events   = my_events.
    *TOP OF PAGE
      READ TABLE my_events
           WITH KEY NAME = slis_ev_top_of_page
           INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE fn_top TO ls_event-form.
        APPEND ls_event TO my_events.
      ENDIF.
      CLEAR ls_event.
    *END OF LIST
      READ TABLE my_events
            WITH KEY name = slis_ev_end_of_list
            INTO ls_event.
      IF sy-subrc = 0.
        MOVE   fn_eol TO ls_event-form.
        APPEND ls_event TO my_events.
      ENDIF. " SY-SUBRC for READ TABLE
    ENDFORM.                    " eventtab_build
    *&      Form  top_comment
          text
         -->P_MYTOP[]  text
    FORM top_comment USING my_top_of_page TYPE slis_t_listheader.
      DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
      DATA: ls_line     TYPE slis_listheader,
            li_recs     TYPE i,
            lc_name(60) TYPE c,
            lc_from(30) TYPE c,
            lc_to(30) TYPE c.
      CALL FUNCTION 'MONTH_NAMES_GET'
           TABLES
                month_names = it_t247.
    Company Name
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = TEXT-001.
      APPEND ls_line TO my_top_of_page.
      CLEAR ls_line.
      ls_line-typ  = 'S'.
      ls_line-info  = TEXT-002.
      APPEND ls_line TO my_top_of_page.
    Date
      CLEAR lc_name.
      CONCATENATE sy-datum+6(2) ',' INTO lc_name.
      READ TABLE it_t247 WITH KEY mnr = sy-datum+4(2).
      CONCATENATE text-003 it_t247-ltx lc_name sy-datum(4)
             INTO lc_name SEPARATED BY space.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO my_top_of_page.
    ENDFORM.                    " top_comment
    *&      Form  build_layout
          text
         -->P_GS_LAYOUT  text
    FORM build_layout USING my_layout TYPE slis_layout_alv.
      my_layout-f2code              = d_f2code.
      my_layout-reprep              = 'X'.
      my_layout-confirmation_prompt = 'X'.
      my_layout-flexible_key        = 'X'.
    ENDFORM.                    " build_layout
    *&      Form  TOP_OF_PAGE
          Writes comments on top of page
    FORM top_of_page.
      DATA: ls_line     TYPE slis_listheader,
            lc_name(60) TYPE c.
      IF sy-ucomm = '&RNT_PREV'.
        READ TABLE gt_top INTO ls_line INDEX 2.
        lc_name = ls_line-info.
        WRITE 'Page:' TO lc_name+45(5).
        WRITE sy-pagno TO lc_name+52(5).
        ls_line-typ  = 'H'.
        ls_line-info = lc_name.
        MODIFY  gt_top FROM ls_line INDEX 2.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = gt_top.
    ENDFORM. " TOP_OF_PAGE
    *&      Form  my_top
          text
         -->P_GT_TOP[]  text
    FORM my_top USING top TYPE slis_t_listheader.
      DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
      DATA: ls_line     TYPE slis_listheader,
            li_recs     TYPE i,
            lc_name(60) TYPE c,
            lc_from(30) TYPE c,
            lc_to(30) TYPE c.
      CALL FUNCTION 'MONTH_NAMES_GET'
           TABLES
                month_names = it_t247.
    Company Name
      CLEAR lc_name.
      WRITE text-001 TO lc_name.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    **Report Name
      CLEAR lc_name.
      WRITE text-002 TO lc_name.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    Range of date
      CLEAR lc_name.
      lc_name = p_date+4(2).
      READ TABLE it_t247 WITH KEY mnr = p_date+4(2).
      CONCATENATE: text-003 it_t247-ltx sy-datum(4)
                   INTO lc_name SEPARATED BY SPACE.
      ls_line-typ = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    ENDFORM.                    " my_top
    *&      Form  END_OF_LIST
          Writes signature line at end of list
    FORM end_of_list.
      IF sy-ucomm = '&RNT_PREV' OR sy-ucomm = 'AUSW'.
        REFRESH gt_eol.
        PERFORM my_eol USING gt_eol[].
      ELSE.
        REFRESH gt_eol.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = gt_eol
                i_end_of_list_grid = 'X'.
    ENDFORM. " END_OF_LIST
    *&      Form  my_eol
          text
         -->P_GT_EOL[]  text
    FORM my_eol USING eol TYPE slis_t_listheader.
      DATA: ls_line     TYPE slis_listheader,
            lc_name(60) TYPE c.
    Signature Line
      CLEAR lc_name.
      lc_name = '.'.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR lc_name.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      WRITE 'Submitted By:' TO lc_name(28).
      WRITE 'Noted By:' TO lc_name+30(28).
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR: lc_name, ls_line-key.
      lc_name = '.'.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR lc_name.   CLEAR ls_line.
      WRITE sy-uline(28) TO lc_name(28).
      WRITE sy-uline(28) TO lc_name+30(28).
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
    ENDFORM.                    " my_eol

    1.U are not getting the data into Excel when u client Excel Buttton from the ALV display ?
    2.if yes then u will get one message stating that templet is Missing like this ?
    Regards
    prabhu

  • How to remove Fatal Error in Reports 3.0

    How to eliminate Fatal Error in the Reports,
    I created Formula column and in that i am writing query for
    retreiving values and storing that value in other variable which
    i declared in the formula columns PL/SQL and in that I didn't
    find any compilation errors but when i run the report i am
    getting the fatal error. Please give me the solution for that
    fatal error.

    Hi ,
    first goto the properties sheet of formula column.
    in the properties sheet
    increse the widht property by 200.
    still u have the same problem again increase by 100.
    repeat like that.
    at certain level u r error fixed.
    bye
    srini

  • What does the error code -41004 mean in print report.vi?

    I am getting the following error in the Print report.vi.
    Error Code : -41004
    Error Scource : Print Report.viPrint_VI_Image.vi

    Hi
    I have attached the main vi which is using the NI-Print Report.vi.
    I have also attached the image of the error desciption I got.
    Attachments:
    OPG_Print_to_PDF.llb ‏94 KB
    error.bmp ‏273 KB

  • Error 97 when running built application and printing report.

    I get the following message:
    Error 97 occurred at Unknown System Error in Print Report.vi->PM Workorder.vi->NEW PM main.vi
    Null Refnum was passed in as input
    when I try to run my built application, but it will run fine as a vi. I am using the Report Generation Toolkit with the Excel functions. I am opening an Excel template, adding data, and then printing. When I run the built application it looks like Excel is not opening up, but when I run the vi, I can see excel open and the report is sent out to the printer. I am running both the built application and the vi on the same computer.

    Hello,
    I found a similar problem some month ago. I solved including in the application the excel vi's library, that you will find in the labview directory addons.
    I hope this info will help you!
    Regards
    Neon

  • Fatal error in java1.2

    Hi..
    Here i written a program to read the .PDF file form java using java Etymon project. My program is compiled very well..When i run the program it will the error..."Fatal error...Report to sun.java.com for bug"..
    Why the error is produced?If you anybody knows the result plz reply me..
    Thanx a lot

    When i run the program it will
    the error..."Fatal error...Report to sun.java.com for
    bug"..Did it print out 216 characters? They'll obviously kill you if you report in. I think they're tracking this thread right now.
    run.

  • Purchase Order Print Report Compilation Error

    Hi,
    While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
    identifier GET_PRECISION must be declared.
    Where as this is a seeded function inbuild in the Program Units.
    Also while compiling on server we get the error.
    Cannot convert rdf to rep.
    Thanks,
    Angelica.

    Couldn't find how to copy the PO layout over using copy express.
    I did compare the RDOC fields for POR20002 in both databases and they are Identical. 
    In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing.  Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places.  When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
    Again, SBODemoUS works correctly and AAA_TEST give the error.

  • Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

    I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
    Error 7 occurred at Get LV Class Default Value.vi
    With the following text:
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Non-existent board.
    Complete call chain:
         Get LV Class Default Value.vi
         NI_report.lvclass:New Report.vi
         print report.vi
         EMS V3.0 streamline.vi
    LabVIEW attempted to load the class at this path:
    H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
    "EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
    Any help would be appreciated. Thanks.
    Garrett Herning

    Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
    Error:
    An error has occurred. Expand the Details section for more information.
    Details:
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Non-existent board.
    Method Name: Linker:Write Info To File

  • How to print only fatal error in log file in tomcat4.1

    Hi all ,i m using tomcat4.1
    1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
    assume below ip address is corect:
    this is exact printing in my log file
    .12.2.3.3  - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
    12.2.3.3  - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
    12.2.3.3  - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
    12.2.3.3  - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
    123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
    12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
    12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
    12.2.3.3  - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
    112.23.3  - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
    112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
    12.2.3.3  - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
    12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
    12.2.3.3  - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
    <Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
    Edited by: Deepak23 on Oct 24, 2007 11:16 PM

    One of my standard answers (which will explain the use of Directory Objects)...
    The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
    The correct thing to do is to create a directory object e.g.:
    CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
    Then, grant permission to the users who require access e.g....
    GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
    fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

  • Error While Printing the Report

    Post Author: saqib
    CA Forum: .NET
    HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.  

    Try the following if your printer is a network printer
    1. Add Printers - select Local Printer
    2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
    3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
    4. Select the printer and printer type in "Add Printer" wizard.
    5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
    Hope this helps..
    Yogesh
    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

  • Error when sending report output to printer from Forms 10g

    Hi,
    I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
    terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
    Thanks,
    Anna
    PROCEDURE SEND_TO_PRINTER IS
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(50);
    rep_server system_variables.reports_server%type;
    alldone          exception;
    BEGIN
         select reports_server
         into rep_server
         from system_variables;
         if rep_server is null then
              msg_alert('Error getting the reports server name', 'I', FALSE);                
              raise alldone;
         end if;
         :ctrl.run_report_errors := 'N';                    
         repid := find_report_object('REP_OBJ1');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
         IF :ctrl.rg_print = 'P' THEN
              --Send the output to printer.
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
         ELSIF :ctrl.rg_print = 'R' THEN
              --Rich Text Format
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
         END IF;
         v_rep := RUN_REPORT_OBJECT(repid);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
         LOOP
              rep_status := report_object_status(v_rep);
         END LOOP;
         IF rep_status = 'FINISHED' THEN
              null;
         ELSE
              :ctrl.run_report_errors := 'Y';
              msg_alert('Error when running report.' || rep_status, 'I', FALSE);           
         END IF;
    EXCEPTION
         when no_data_found then
              msg_alert('Error getting the reports server name', 'I', FALSE);      
         when alldone then
              null;     
    END;

    If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
    LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

Maybe you are looking for