Fatal error on hpzprl40.exe windows 7 D100 all in one printer

getting fatal error on setup of printer windows 7 using wireless

Yes... it worked perfectly and saved the extreme hassle of a reformat... if it wouldn't have worked or messed up... I could then follow through with the reformat.. but.. turned out to be very slick and easy...

Similar Messages

I keep getting an error number oxc19a0035 on my c7250 all in one printer

i keep getting an error number oxc19a0035 on my c7250 all in one printer, does anyone kn ow the fix?

I solved the problem on mine by opening the cartridge door and extracting each color cartridge and wiping the heads which had gummy ink deposits on them. Once reseated, the machine returned to its old shiny former self.

How can I fix a check paper error on the HP psc 1210 all in one printer?

Product name/number: HP PSC 1210 all-in-one
OS: Windows 7
Error Msg: Check Paper light flashes
I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean. Is there a a paper out switch that can fail?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

E error light was on my F4280 all-in-one printer recently. Then it would print

For a few weeks on my f 4280 printer an E error light came on after I put in new black ink and I couldn't print anything--the low ink light came on even after I changed the color and black cartridges. Then yesterday I turned the printer on and was able to print 18 pages--but the cartridge fell out when I opened the front after a paper jam occurred and printer stopped. After returning the cartridge, the error message says that it is an incompatible cartridge--yet it's the same #60 that I've always used. I've never seen the cartridge fall out of place before, either, and I kinow that it clicked into place properly when I first installed it in April. When I reinstalled another new ink cartridge, the E light came on again and I can't print again. Thanks for your solution in advance. Julie

I solved the problem on mine by opening the cartridge door and extracting each color cartridge and wiping the heads which had gummy ink deposits on them. Once reseated, the machine returned to its old shiny former self.

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Can't Install C5200 All-in-One Printer Full Feature Software- Runtime error Prevents Installation

I am running Windows 7 64-bit and I am unable to install the HP Photosmart C5200 All-in-One Printer series Full Feature Software that I downloaded from the website.
After extraction, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: c:\Users\MyUsername~1\AppData\Local\Temp\7zS7526\Setop.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information
Can anyone help me solve this problem?
The actual printer and all associated drivers are installed and working correctly.

Hey cmsciulli,
I would first like to welcome you to the HP Support Forums!
When getting the Microsoft Visual C++ Runtime error message. The first step that I would suggest doing, is to make sure that you do have the latest update. I have included a link to the latest available download from Microsoft for 'Visual C++ Redistributable for Visual Studio 2012 Update 4'. Along with this update, I would also suggest completing any other Windows updates that are available to you.
After you have installed all the necessary updates, I would suggest restarting your computer, if you have not already. Then try installing the printer software again.
If you are still experiencing the same error message when trying to install the printer, please let me know the version of Windows that you are currently running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
Looking forward to your reply!
I worked on behalf of HP

Printer Error - HP All-in-One Printer App

I have the HP Photosmart B210 and have been using the HP Printer Control app on my Lenovo laptop. It has worked successfully until a few weeks ago. When I read some of the reviews on the updated app - which is now HP All-in-One Printer Remote, I realized upgrading to Windows 8.1 may help. Once updated to Windows 8.1 I did start printing! However, my documents would only print half-way through and then I receive an error message and the printing stops. So, I will get one or two pages out of a 4 to 5 page document with the same Error message half-way through. No description about the error - just error - printing has to be cancelled. Suggestions? Pleeeeaaaassssseeee!

Hello Seahorse1305,
Welcome to the forums!
I am here to assist you with the printing issue you are having with your Photosmart B210. The first thing I do recommend, is running the HP Print and Scan Doctor to find and fix printing and scanning problems. If there is more of an issue that the tool cannot fix, it will let you know what the problem is.
Please let me know how this turns out for you!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

The drivers for this do not seem to work on Windows 8.1. Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan. It gives me the message No scan options refer to device documentation to troubleshoot. It works fine on my old laptop which has Windows XP installed.
NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1. Help please I am getting very frustrated.

Hi amp229,
Welcome to the HP Forums!
I see that your are getting the specified file cannot be found error, during the installation.
Please try the following:
1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
Then try the install.
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
Then try the install.
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Then try the install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twice since i have owned it. Can you help me out as to what I should do with the printer

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

6280 All-in-One printer - changing from USB to Ethernet connection - error - can't find the printer

I am trying to reinstall my C6280 All-in-One printer from the product CD - my original installation was for a USB connection, I would now like to reinstall to an Ethernet connection for use on our wireless nework. I have gone through the HP -Installing the Product Software in Windows XP for a Wired (Ethernet) Network Connection - instructions but keep getting the error message - Can't locate the Printer. I have connected the ethernet cable in the ethernet port of the computer and the router (Airlink 101). Any suggestions on what I might be doing wrong?
This question was solved.
View Solution.

Hi,
You can use the following link to setup the printer over a wired n/w.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01708573&tmp_task=setupCategory&lc=en&dlc=en&cc...
Just to confirm..Make sure that you connect the "Printer and Router using the ethernet cable"
To make sure that your printer is found during the installation, after connecting the ethernet cable, make sure that your printer is getting a valid IP address.
Setup Menu--Network--View Settings--Display Wired Summary.
Although I am an HP employee, I am speaking for myself and not for HP.

Why can't i install all in one printer 4200 series on my windows 7 home premium?

I can't install my 4200 series all in one printer on windows 7 home premium 64 bit ? Help please?

Sharon,
Welcome to the HP Community Forum.
sharond6941 wrote:
I can't install my 4200 series all in one printer on windows 7 home premium 64 bit ? Help please?
It would help a great deal if you could help explain a bit why you cannot install the software.
Does the software not download?
Can you not find your printer? Do you not know what kind of printer you have?
Are there errors during the installation?
Can you provide any information to help us understand the situation?
========================================================
Help and Instructions to Install the Full Feature Software for the Printer:
Install Full Feature Software – Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

HP All-in-One Printer Remote App For Windows Phone 8.1 Troubleshoot

Dear HP,
Device Nokia Lumia 520
OS Windows Phone 8.1
Printer HP Officejet Pro 8600 All in One Printer
I have installed HP All-in-One Printer Remote on my smartphone as well as on my PC having Microsoft Windows 8.1. The PC app is running
fine but on my smartphone, app can't find my HP Wireless printer. All Devices(PC, Smartphone, Printer) are connected to same wireless LAN Network.
Regards
Sahyog Vishwakarma
Mob.: +91-7206369455
Yamuna Nagar
Haryana

Hi,
The app for Windows phone is a BETA version. In my case (also a Nokia) it can find my printer but when sending something to printer, printer won't print. Again, it's only a BETA version.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Fatal error on hpzprl40.exe windows 7 D100 all in one printer

Similar Messages

Maybe you are looking for