Fatal error. Unhandled msi error 1627 when installing NIDAQ 7.3.1
Fresh win2k install. Error off CD or from downloaded zip files.
Hello T.
NI-DAQ 7.4 is out. I would strongly recommend it unless there is a particular reason you need 7.3.1.
Similar Messages
-
Fatal msi error mp.msi could not be installed
Good morning,
I have SCCM 2012 R2 running on Server 2012 R2. I've got a primary site and two secondary sites, all of them with identical hardware and software. I've set them all up the exact same way, but on one of my secondary servers I can not get the MP
role to start. Looking at the MPSetup.log I see the following:
<10/10/14 08:17:31> ====================================================================
<10/10/14 08:17:31> SMSMP Setup Started....
<10/10/14 08:17:31> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:ILCBPSCCM1 SMSMP 0
<10/10/14 08:17:31> Installing Pre Reqs for SMSMP
<10/10/14 08:17:31> ======== Installing Pre Reqs for Role SMSMP ========
<10/10/14 08:17:31> Found 2 Pre Reqs for Role SMSMP
<10/10/14 08:17:31> Pre Req MSXML60 found.
<10/10/14 08:17:31> No versions of MSXML60 are installed. Would install new MSXML60.
<10/10/14 08:17:31> Enabling MSI logging. msxml6_x64.msi will log to C:\Program Files\Microsoft Configuration Manager\\logs\msxml6_x64MSI.log
<10/10/14 08:17:31> Installing C:\Program Files\Microsoft Configuration Manager\\bin\x64\00000409\msxml6_x64.msi
<10/10/14 08:17:35> msxml6_x64.msi exited with return code: 0
<10/10/14 08:17:35> msxml6_x64.msi Installation was successful.
<10/10/14 08:17:35> Pre Req SqlNativeClient found.
<10/10/14 08:17:35> SqlNativeClient already installed (Product Code: {49D665A2-4C2A-476E-9AB8-FCC425F526FC}). Would not install again.
<10/10/14 08:17:35> Pre Req SqlNativeClient is already installed. Skipping it.
<10/10/14 08:17:35> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<10/10/14 08:17:35> Installing the SMSMP
<10/10/14 08:17:35> Passed OS version check.
<10/10/14 08:17:35> IIS Service is installed.
<10/10/14 08:17:35> No versions of SMSMP are installed. Installing new SMSMP.
<10/10/14 08:17:35> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<10/10/14 08:17:35> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<10/10/14 08:18:16> mp.msi exited with return code: 1603
<10/10/14 08:18:16> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<10/10/14 08:18:16> Fatal MSI Error - mp.msi could not be installed.
<10/10/14 08:18:16> ~RoleSetup().
I also found this in my mpMSI.log file
MSI (s) (0C!AC) [08:18:00:125]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Does anyone have any ideas why I would be receiving this error? These SCCM servers are brand new servers that are replacing our current SCCM 2007 servers and I did notice that somehow the old 2007 SCCM client had gotten installed on this server automatically
so I used ccmsetup /uninstall and also used ccmclean to remove it because I read that might be the issue, but it hasn't resolved the issue. Any help would be appreciated. ThanksWOOT, WOOT! Actually I just got it. I ended up doing the following:
Ran ccmsetup.exe /uninstall and rebooted
Ran ccmclean.exe /all and rebooted
Removed IIS role from server and rebooted
Added IIS role back to server and rebooted
Checked my MPSetup and MPMsi logs and they both show success. Finally!
<10/10/14 09:01:12> ====================================================================
<10/10/14 09:01:13> SMSMP Setup Started....
<10/10/14 09:01:13> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:ILCBPSCCM1 SMSMP 0
<10/10/14 09:01:13> Installing Pre Reqs for SMSMP
<10/10/14 09:01:13> ======== Installing Pre Reqs for Role SMSMP ========
<10/10/14 09:01:13> Found 2 Pre Reqs for Role SMSMP
<10/10/14 09:01:13> Pre Req MSXML60 found.
<10/10/14 09:01:13> No versions of MSXML60 are installed. Would install new MSXML60.
<10/10/14 09:01:13> Enabling MSI logging. msxml6_x64.msi will log to C:\Program Files\Microsoft Configuration Manager\\logs\msxml6_x64MSI.log
<10/10/14 09:01:13> Installing C:\Program Files\Microsoft Configuration Manager\\bin\x64\00000409\msxml6_x64.msi
<10/10/14 09:01:16> msxml6_x64.msi exited with return code: 0
<10/10/14 09:01:16> msxml6_x64.msi Installation was successful.
<10/10/14 09:01:16> Pre Req SqlNativeClient found.
<10/10/14 09:01:16> SqlNativeClient already installed (Product Code: {49D665A2-4C2A-476E-9AB8-FCC425F526FC}). Would not install again.
<10/10/14 09:01:16> Pre Req SqlNativeClient is already installed. Skipping it.
<10/10/14 09:01:16> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<10/10/14 09:01:16> Installing the SMSMP
<10/10/14 09:01:16> Passed OS version check.
<10/10/14 09:01:16> IIS Service is installed.
<10/10/14 09:01:16> No versions of SMSMP are installed. Installing new SMSMP.
<10/10/14 09:01:16> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<10/10/14 09:01:16> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<10/10/14 09:01:56> mp.msi exited with return code: 0
<10/10/14 09:01:56> Installation was successful.
<10/10/14 09:01:56> ~RoleSetup(). -
Why do I get Error 1627 when installing NI-488.2 ver 2.2SW on WinXP?
when installing NI-488.2 on a win XP laptop I get the following error what do I need to do?
MsiError 1627: 1: 2707 2: WindowsFolder.47899608_E211_483A_A7CE_0FDFB1FC04F3
Exception code: E06D7363 ()
Fault address: 7C81EB33 0001:0001DB33 C:\WINDOWS\system32\kernel32.dll
Registers:
EAX:00D9FA4C
EBX:0046A160
ECX:00000000
EDX:0051ED38
ESI:00D9FADC
EDI:00D9FADC
CS:EIP:001B7C81EB33
SS:ESP:002300D9FA48 EBP:00D9FA9C
DS:0023 ES:0023 FS:003B GS:0000
Flags:00000206
Stack Trace
Address Frame LogicalAddr Module SymbolName + Offset
7C81EB33 00D9FA9C 0001:0001DB33 C:\WINDOWS\system32\kernel32.dll RaiseException + 82
004D0E5F 00D9FADC 0001:000CFE5F E:\NI-488.2\Setup.exe
00479A63 00D
9FBBC 0001:00078A63 E:\NI-488.2\Setup.exe
004272F7 00D9FCC4 0001:000262F7 E:\NI-488.2\Setup.exe
00469FEC 00D9FD78 0001:00068FEC E:\NI-488.2\Setup.exe
0046A0E6 00D9FD9C 0001:000690E6 E:\NI-488.2\Setup.exe
00472121 00D9FDE4 0001:00071121 E:\NI-488.2\Setup.exe
004721DE 00D9FF18 0001:000711DE E:\NI-488.2\Setup.exe
004F7119 00D9FF80 0001:000F6119 E:\NI-488.2\Setup.exe
004D69AE 00D9FFB4 0001:000D59AE E:\NI-488.2\Setup.exe
7C80B50B 00D9FFEC 0001:0000A50B C:\WINDOWS\system32\kernel32.dll GetModuleFileNameA + 436Hi,
First make sure that you are installing the software as an Administrator so that you have access to all the registries. Now, if logged in as an Administrator and you are still having this error, check the following link.
How Do I Install LabVIEW if I Receive an Error During the Installation?
This document is valid for any software that installs from a CD. Basically is copying the content of the CD into the Hard Disk and running the install from the HD.
If that doesn't fix the problem then try installing the driver in a different machine just to make sure that it is not the software in the CD that is corrupted. If it is corrupted then you can
download the driver from the GPIB Drivers page.
Make sure that every time you want to install or reinstall the driver, that you uninstall the previous version and reboot the computer before installing the new one.
Hope this helps.
Ricardo S.
National Instruments. -
Error in writing to directory when installing
Hi, I encounter an error when installing Oracle 9.2.0.6 client on Window 2000 Professional machine. After I execute setup.exe about 3-5 secs, an error message is showed which displays "Error in writing to directory c:\docume~1\....\Temp\OraInstall2009-04-18_01_08_20PM. Please ensure that this directory is writable and has atleast 32MB of disk space.Installation can not continue.".
I tried a number of testings and am sure that the cause of this error is not like the surface desription of the message. The error is no reaseon triggerred by permission or disk space. In addition, the timing of the error happens is when the installation copy temp files to my OS temp directory. I have further googled much information and did some tries but still have no idea how to solve it. Can anyone give instrcution to solve this problem?
Thank in advance.I find a document describing the problem I have in installation. The reference is
https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=433612.1&blackframe=1.
It says 2 work-arounds for the problem.
----------Extraced from the doc----------------------------------------------------------------------------------
As of 05-25-2007, this BUG is still unresolved. Two potential work-arounds exist:
Workaround #1
============
Keep 9.2.0.5 (or greater) patchset staging area, and use the runInstaller from the 9.2.0.5 (or greater) patchset staging area.
Workaround #2
============
To fix this in the $ORACLE_HOME, you can just edit the file $ORACLE_HOME/oui/oraparam.ini and update the value of the "JRE_LOCATION" with the actual value of <ORACLE_HOME>/jdk directory (upto and including the "jdk" directory).
About the first work-around, I don't know how to do. About the second one, I am confused, because the "$ORACLE_HOME/oui" path will be created after the installation is done. But I encounter error in installation. So, how can i edit the file "$ORACLE_HOME/oui/oraparam.ini."? In addition, I find oraparam.ini in the "disk1\install" path. And change the value of "JRE_LOCATION" to "C:\orahome\jdk" (My $ORACLE_HOME is "C:\orahome"). Howere, it doesn't work. I don't understand the meanings of the two work-arounds. Can anyone explain these to me or tell me where to get fruther information?
Thank in advance. -
Error opening file for writing when installing
I cannot install Flash on my Vista X64. I have tried running
the downloadable install and the online install. Any time I try to
run the install I get "error opening file for writing" when trying
to write C:\Windows\SysWOW64\Macromed\Flash\Flash9d.ocx.
I have uninstalled Fash first (it never worked anyway) and I
have rebooted. I even tried rebooting in Safe Mode but no matter
what I try, I cannot remove the existing Flash9d.ocx and installing
will not overwrite the existing file.
Even after uninstalling Flash and rebooting to safe mode,
Windows reports that flash9d.ocx is in use. So why is the file in
use after uninstalling?
Any help is appreciated.
DaleWell, I finally figured out the problem with mine today. Of
course, I'd still like to know what nefarious purpose might be
involved with the Flash activeX file being loaded in memory even
after uninstall and reboot such that it cannot be removed from my
PC even in Safe Mode.
At least I got Flash working. I discovered that Flash was
disabled in IE.
In IE, go to Tools->Options->Programs and then Manage
Add-Ons. In my case, the ShockWave Flash Object was set to
disabled. I changed it to Enabled and I was able to install and use
Flash properly. Now I am just not sure I want to.
With the questionable practices of using the ActiveX control
even after uninstall, and making the file un-removable, along with
the extremely (in my opinion) dishonest practice of installing
Google Toolbar with Flash, I am hoping that Microsoft's Silverlight
puts Flash out of the market - and I'm no huge fan of Microsoft
either. With the new practices from Adobe, they are, in my opinion,
no better than any other spyware and malware purveyor on the market
- right up there with Napster and the dozens of follow-on products
that tricked users into installing unwanted software. -
BusinessObjects.msi not found when installing BOE R3 FixPack 1
I'm building a new R3 environment on a windows box. I can successfully install the base R3 package without error. Everything works, deploys, etc. When I try to run the installation for FixPack1, I get prompted to browse to the BusinessObjects.msi file. I think the install tries to find the msi from the base install in a temp folder, but it is no longer there...cleaned up for some reason.
Has anyone come across this? Any ideas on how to perform the FP1 installation without the BusinessObjects.msi file being available? Is there a local security policy that might be controlling the purge of the temp folder after the base install is complete?
Any ideas would help.
Thanks!Just curious can you extract the file with winrar and then install. I haven't run across your particular error but that has resolved other issues for me.
Regards,
Tim -
MSI errror 2203 when installing the new 7.1
Hello gurus,
Trying to install the PI7.1 while in the sapinst pahse "install common system files" it tries to run the patch from the NTPATCH directory, called: vcredist_x64.msi.
I get window with:
Running msiexec failed with return code 1603: Fatal error during installation.
Commandline was msiexec.exe /norestart /L vcredist_x64.log /i Y:\PI7.1_installation\master7.1\IM_WINDOWS_X86_64_ORA\NTPATCH\vcredist_x64.msi /qn
while in the log directory I get:
DEBUG: Error 2203: Database: C:\WINDOWS\Installer\3347f671.ipi. Cannot open database file. System error -2147024629
MSI (s) (84:7C) [08:18:19:860]: Product: Microsoft redistributable runtime DLLs VS2005 SP1(x86_x64) -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2203. The arguments are: C:\WINDOWS\Installer\3347f671.ipi, -2147024629,
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2203. The arguments are: C:\WINDOWS\Installer\3347f671.ipi, -2147024629,
Action ended 8:18:19: InstallInitialize. Return value 3.
Action ended 8:18:19: INSTALL. Return value 3.
Any ideas ?
Please advice,
Dimitry HaritonovError 1603 usually says some kind of access denied or permission problem.
1. check that you have local administrator rights on the server.
2. check the the installation folder is locally on the computer (and you are not trying to install from a share on the network).
3. check that you don't have anything else running msiexec.exe (some other installation) - maybe a different installation.
4. install from an interactive console session, not from Terminal. -
Hi,
I have LabVIEW 2013 SP1 (32-bit) installed on 64bit machine everything was fine untill i tried to create an installer for my LV application the install build finishes with no error but when i try to test the installer i get the following error:
My installer includes the NI LabVIEW Run-Time Engine 2013 SP1, and my application excutalbe runs fine with no errors. at this point i have no idea what is causing this error and i couldn't find any asnwer in the forum that can help so any hint will be appreciated.
Samir F
Electrical/Software Engineer
Transtechnik-USA CorpHi muks thanks for the reply
I already went thru that post before and i already tried the following:
1. I created a new fresh project and added the files to to it and built the executable and installed from it.
2. I reinstalled the windows installed as it was suggested here
3. I also tried editing the project file using Notepad by removing the build informaiton and started fresh with new build.
none of the obove solved my problem. -
Unhandle msi error 1615 at install
Dear Sir / Madam,
I am trying to install the LabView7.0 to Linux using a emulator called "wine". But when I start to install it just show me this error message and stop the installation.
MsiError 1615: <Unable to format error record.>
Exception code: E06D7363()
Fault address: 3740FA14 0001:0001EA14 c:\windows\system32\kernel32.dll
Registers:
EAX:373FCE71
EBX:37469C9C
ECX:00000000
EDX:E06D7363
ESI:204A6444
EDI:204A63BC
CS:EIP:00733740FA7B
SS:ESP:007B204A6390 EBP:204A6404
DS:007B ES:007B FS:003B GS:0033
Flags:00200206
Stack Trace
Address Frame LogicalAddr Module SymbolName + Offset
7340FA7B 204A6404 0001:0001EA7B C:\windows\system32kernel32.dll RaiseException + 103
004BFD20 204A6444 0001:000BED20 Z:\home\cora\Desktop\lab\setup.exe
0047010E 0000064F 0001:0006F10E Z:\home\cora\Desktop\lab\setup.exe
Are there is anybody help me to solve this problem? Thanks in advance.
Gddy
Attachments:
Screenshot-1.png 119 KBHi,
I am not a Linux expert but see if this thread helps.
Ankita -
Error in writing to directory when installing Oracle9i
Hi, i am installing Oracle9i 64bit on a 64bit processor and when i run the installer and i get the following error:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2006-12-07_02-38-41PM. Please wait ...
Error in writing to directory /tmp/OraInstall2006-12-07_02-38-41PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the tmp directory and it has enough space and the directory is drwxrwxrwx
thanksCheck similiar discussion in Problem installing Oracle HTTP Server on Red Hat Enterprise Linux4 for APEX
-
Error Codes 1630 and 1722 when installing FSX in Windows 8.1
Multiple efforts to install Flight Simulator X Gold on my new 8.1 system always results in error codes 1630 and 1722 at the end of the installation process. Lots of searching the net suggests that this not an uncommon problem. After trying a
number of possible fixes suggested by a Microsoft Support Engineer in a thread on the Microsoft Community Forum without success, he referred me to this forum.
In summary: After initially transfering a working version of FSX from my XP machine to the new 8.1 machine with LapLink it worked flawlessly. A subsequent misdiagnosed printer issue by Dell tech support resulted in a refresh of 8.1 wiping out FSX (and
many other apps). Efforts to reinstall FSX from the either the original disks or a newly purchased set of disks both resulted in the error codes at the end of the installation process. Failed resolution efforts include so far include:
- All recommendations in kb/258496 (including Xcopy which appears not to work on 8.1 at all)
- Clean startup procedure from kb/331796 (8.1 froze up hard in trying it)
- System File Checker per kb/929833 showed "did not find any integrity violations".
- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
Bottom line seems to be that this is recurring issue with 8.1 and FSX but neither I or the Community Forum have been unable to find an effective solution. Any advice/help/recommendations would be appreciated. Will be glad to provide needed additional
info as needed.
Mark Davis- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
try this solution replied by Colin Vincent
http://www.justanswer.com/computer/7b2g4-using-fsx-years-when-loading-receive.html
you should post in this support forum
http://www.microsoft.com/Products/Games/FSInsider/community/Pages/ -
Error in invoking target 'client_sharedlib' when installing Oracle on Linux
Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!user11309581 wrote:
Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
10gR2 is de-supported - plus CentOS is not a certified distro, so things may or may not work - http://download.oracle.com/docs/cd/B19306_01/install.102/b15668/toc.htm#BABIAECC
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!Try installing on a certified distro such as Oracle Enterprise Linux - free download at http://linux.oracle.com
HTH
Srini -
ORA-01017 error in Database Configuration Assistant when installing Oracle
I am installing Oracle 9i, 9.0.1.1, on an NT Workstation.
When I get to the Database Configuration Assistant step, after the software has been installed, I get an error when the database is being created:
ORA-01017 Invalid Username/Password; Login denied
I have tried several times with different database creations. The first time I got the error was when I did a custom database creation, the other time was when I created a general purpose database, which clones an existing database onto the NT workstation.
The NT system that I am using had an earlier version of Oracle installed on it, which I completely uninstalled.
Any ideas what might be wrong?Deepak_DBA wrote:
hi,
you might have deleted the instance manually..
oradim -delete -sidHence,
ebrian wrote:
Did you already remove the Windows service associated with the database? -
Error Creating Reports Server Components when installing 11.1.1.2
Hi There
I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
Executing Task: Creating Reports Server Components
ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
progress in calculate progress4
Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
GJS: About to call startOpmn
GJS: Entered startOpmn
*************** Trying to Start OPMN **************
*************** Executing Command **************
/home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
And how do I prvent it from happens again.
Note: "fd-red03.in.fd.dk" is the full hostname
Regards Hans SHello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo -
Error 1327. Invalid Drive when Installing 502-06-07-2013
When I'm trying to install the systemupdate502-06-07-2013 fails with "Error 1327. Invalid Drive: m:\"
This drive is a network drive that I have My Documents mapped to. I tried to install from the Downloads directory as well as the root of the C drive and also attempted to install as the admin. Is this a known bug? Is there a way to get it to ignore the network drives without unmapping them?Forgot to mention that I am running Windows 8.
Maybe you are looking for
-
One Apple ID, Multiple devices
Getting married soon and joining two Apple households. We will have an iMac, iPad, MacBook and two iPhones. Is it possible to have one apple Id for all of these computers/devices? Thanks in advance.
-
Inactive (or broken) reset button on my Ze
Hello! I recently tried using the recovery tool on my zen V to diagnose any issues. The player had been charging on the computer for some time but was not being recognized by the computer itself (not unusual). So when I tried to use the recovery tool
-
3 Harddrives + 2 Optical's
Hello, I had 1 CDRW drive and 2 WD HDD's.. but I found a old computer in someone garbage :p and it had a DVD-ROM and a 27 GB HD so i put the DVDROM in and now i have no more IDE space.. I was just wondering is it possible for me to use that 3rd 27 gb
-
I did a search on this forum for can't sync and got over 500 results. NONE of which has fixed my problem, and many many others are having the same problems. And no, my phone has not been hacked, altered, dropped or anything else. It all started the d
-
N95 shuts down, been to repair 3 times can anyone ...
ive had the n95 a month now i bought it from ebay. its been to an authourised dealer twice and then to nokia . it is still shutting down usually when i try to answer a call. occasionally it will close down without touching it, i love the phone can an