Fatal Error - version Cue- no updates PS -CS 4 Extended

Get A "Fatal Error Message" Photoshop CS 4 Extended- something about Version Cue. When I check for updates there are none available.
Any Help solving this?
Thanks!!

Hi Chris
The exact wording is: Fatal Error -missing component

Similar Messages

Fatal Error while trying to update device software

I have recently purchased my first blackberry (the storm). I have added the desktop manager to my computer and when I connect my device, it automatically checks for updates. It shows that I have have software updates to download, it gives me a summary of applications to update. Then it asks to click finish. When I do that, it goes to an Error message: Fatal error has occured while updating your devices software. Please try again. I have tried many times, and I even removed the desktop manager and reloaded it, with the same results. Any ideas?

What version of the desktop manager are you using? Do you have enough free memory? and what version are you using now, options/status
If someone helped you give them kudos. Research all info!

A fatal error has occurred while updating your device's software. Please try again.

when the installation process is finished.. the reboot comes nxt and my BB device working now,, after a few minutes, it was appear that "A fatal error has occurred while updating your device's software. Please try again" and i disconnected my device.. my question is.. is this error affect the stability or working of my DEVICE?
I need your answer
Solved!
Go to Solution.

Hi pasakaw
Have you intrepted the update process in anyway .. maybe something gone wrong while doing this software update.Currently what is the status of your BlackBerry is it working properly ?
If you feel any problem then you should try an OS reload using desktop software which will fix any software glitchs.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

A fatal error has occured while updating your device's software

I have a problem I hope you guys can help me.
Blackberry Model: 8820
Device Software version: 4.5.0.55
Desktop Software version: 4.7.0.37
Carrier: Singapore Telecom Mobile Pte Ltd(https://www.blackberry.com/Downloads/browseSoftware.do)
Everytime I start up my desktop software, it would prompt me that there are newer versions for some of the applications in my blackberry such as my browser, brickbreaker etc. So I followed through their instructions to install these updates. When it reached step 3/11, an error would occur while it say it was trying to turn on my radio
Here's the screenshot of the error:
[URL=http://img199.imageshack.us/i/errortac.jpg/][IMG]http://img199.imageshack.us/img199/761/errortac.th.jpg[/IMG][/URL]
But I do observed that @ task 1/11, it switched off my radio. @ task 3/11 it tried to switch back on again. thats when the error occured.
when I unplugged my device after the error, I saw that my mobile connection was off and my blackberry had to re-connect again. I do admit that my area has pretty bad reception, but that cant be the problem right?
On top of that, maybe I also like to pop another 2 questions:
1) Why is it I cant set up my email? I followed the instructions here:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
but my setup wizard dont have the option to select "I want to create or add an email address"
I only gives me the option of the enterprise mail
2) I tried to browse to to te blackberry website using my blackberry, but its says my device is not supported. Any way to solve this?
Message Edited by howb21 on 07-09-2009 12:44 AM

does this help ?
http://www.blackberry.com/btsc/KB02696
Unable to complete loading operation. Fatal error occurred when updating handheld
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Help - Fatal Error When Loading New Updates of System Software

Help please!!
I have a 8120 and just logged in to sync ( as I do weekly) and was alerted to a Latest Update of Software, so I clicked yes etc. and it all started well, then when the software was part way through the install - suddenly it issued me with a Fatal Error Please try to reload the software message .
Now I have no way of connectining to the BB as it appears I am now without any software (just a circle with a line through and the numbers 507 on the screen)
Can anyone suggest what to do please?
thanks
Gavin

Hi and Welcome to the Forums!
Ouch...that sounds not so good. Here is a KB concerning the 507 code:
KB02792 Error message "507" appears on the BlackBerry smartphone while upgrading BlackBerry Device Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Fatal Error when trying to update BB

Ok, trying to keep short. System worked. Running 4.7 on desktop with outlook 07 on Vista. UPdated desktop to V.6. Would no longer recognize any of my 200+ media files. So I reinstalled 4.7. Now I can upload my media, but it will not sync with the rest of my data. All I get is a fatal error.
I know the problem is that the BB Curve 8900 is working on V.6 and the Desktop is running on V4.7, but how do I fix this. I have rebooted and reinstall computer and desktop software. Did not work. I tried to limit the updated modules to try and narrow the error down to a module. After two hours of trying one at a time. They all Fatal errored.
I am to the point that the only solution is to do a hard reset on the BB. The problem with that is that I have registered media on the BB that can not be reinstalled. Am I going to have to Pay for the Media again just because BlackBerry can't write software that works?
Any input and advice would be appreciated. Thanks.

Hiya!
Hard reset has been know to cause some issues with content... but in rare cases and usually only if you have that file open when you pull the battery.
So a battery pull shouldnt affect it.
Or were you referring to a wipe handheld?
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Fatal Error Message C0000034 Applying Update

Toshiba Satellite L655-S5058 15 months old. Tried setting up a wireless router and kept getting message "could not connect". Gave up and at end of session, ran windows updates. Hours later still trying to complete update. Closed and rebooted computer and got message "fatal error C0000034 applying update, operation 288 of 121401 (00000...)"
Computer down and out. Tried restoring to a previous date unsuccessfully. Any idea of cause??

Not good news when Windows is not located. Enter these at the command prompt.
   bcdedit /export C:\BCD_Backup
   c:    cd boot
   attrib bcd -s -h -r
   ren c:\boot\bcd bcd.old
   bootrec /RebuildBcd
See KB927392.
Do you have important files that were not backed up?
-Jerry

Desktop manager- fatal error when updating OS BOLD 9000

Hi guys a few days back my girlfriend entered my password wrong and my blackberry wiped itself, I downloaded bbsak and wiped the phone, and wiped it again with JL_Cmder, it says reload software 507, when I go onto application manager and select update it tells me "fatal error has occurred while updating devices software. Please try again", bbsak also wont load the OS it tells me "the application loader wizard requires that the blackberry device manager needs to be installed", but it is installed on my PC, and when I go to C:\Program Files\Common Files\Research In Motion\AppLoader and select loader it gives me the same error as when I try loading the OS from bbsak, I am running windows XP service pack 2 and desktop manager v5.0.1, and I have OS 4.6 and the latest version 5.0 please help guys, thanks, I will appreciate any help possible

Hey Varushen,
Welcome to the BlackBerry Support Community Forums.
I would suggest try to reload the software by going to www.blackberry.com/update
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Desktop Manager generates 0x00000043 fatal error

I was directed to upgrade the latest version of Desktop manager (5.1.0.28).
When loading the Desktop manager and updating my programs the process of updating works smoothly if I only select the application I want to update (example GOTag).
When I select to update to the latest System software (4.6.1.313) and Core Applications then during the process of updating when Desktop Manager displays that it is "load jvm and system software".
Device Manager then generates and "Error" message:
"A fatal error has occurred while updating your device's software. Please try again.
this system software is not designed for the connected device[A:0x00000043]"
The device is a Sprint/nextel 8350i.
Can I get around this error or should I just not update the BB System Software?
Any help is appreciated.

I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Fatal Error" uploading apps to 7100g

I'm trying to upload a 3 MB application to my 7100g with Desktop Manager 4.7. The Manager is able to see all installed applications on the device, but when start application upload or update, the process starts and runs for a few seconds, showing a slightly progressing progress bar, but then stops and displays the following error message:
"A fatal error has ocurred while updating your device's software. Please try again."
Trying again leads to the same result. What can I do differently? Please help!

I had this problem and I used the last version SDK-15
adobe AIR SDK & Compiler (version 15.0.0.302)
Download Adobe AIR SDK
then I solved this problem.
but now I have another problem when I compile for iphone:
Your binary is not optimized for iPhone 5 - - New iPhone apps and app updates submitted must support the 4-inch display on iPhone 5 and must include a launch image with the -568h size modifier immediately following the <basename> portion of the launch image's....

Fatal error during OS 2 upgrade

Error Message: A fatal error has occurred while updating your BlackBerry® Tablet OS. Please try again.
According to my tablet "About" information, I currently have version 2.0.0.7971 installed but when conncected to Blackberry Desktop Software I am alerted with a message that an upgrade is available. I choose to "update" and it downloads completely and begins install but after several seconds (maybe about 15) it stops with this fatal error. It is attempting to install version 2.0 Bundle 7971.
I realize you're probably wanting to tell me that I do not need the upgrade and to ignore that message, however... When I initially upgraded to 2.0 back in February it went smooth as silk but shortly thereafter, problems insued. I contacted tech support over the phone and basically it boiled down to me having to wipe the tablet and reinstalling everything.
BUT once the tablet was wiped the new 2.0 OS seemed to be what was remaining without having to upgrade to it. So in other words, it was as though when I wiped it, not everything got wiped. It did not go back to factory settings (which would include a lessor OS version), it simply wiped the applications I had installed from App World and my transferred files of course.
Is it possible that this anomaly of not being restored back to factory settings the reason this upgrade prompt is coming up and then also why the "upgrade" ends in a fatal error? It's as though my current tablet OS is literally a phantom OS and that it really doesn't entirely exist as stated.
The reason I suggest something this bizarre is because it would certainly explain several other oddities in my efforts to use the tablet and especially when reading any files that I transfer from PC to tablet. Most of them are said to be unknown formats and I know good and well that's not the case.
Any ideas?? Before suggesting I wipe and reinstall again, please include advice as to what to do should the next wipe result in the same problem (not restoring to factory settings).

An update. I found the way to properly wipe and set up PB for the upgrade is to power off the tablet and then connect the pc. Desktop Manager will sense the tablet but pop up a notice indicating it can't connect. Options of Retry, Upgrade and Cancel are offered. Select Upgrade. Desktop Manager will perform a factory reseton the PB. Once completed and tablet goes through set up, it will also find the update to 2.0.0.7971.
Once complete, DM will see the PB with correct software.Restore can now complete.

Skype Installation fatal error 1603

My skype spontaneously stopped working and I counldnt figure out why. Skype No longer said it was a program on my computer, so I completely deleted it. BUT when i went to reinstall it on my pc (windows 7) it gave the the message "Object already exists" then "Installing Skype failed; code 1603
A fatal error occured". Ive updated my computer and tryed the microsoft fixit install/uninstall. Also Ive watched youtube and read comments by others with the error but nothing is working! PLEASE HELP
Solved!
Go to Solution.

The objfix program that was linked won't run for me? I've tried to open it multiple times and I'm starting to get distressed.
I feel as if I'm doing something incorrectly, although the only thing I have done so far was simply download the program.

Fatal Error Message (no code)

I get this message "A fatal error has occurred while updating your device's software. Please try again," everytime I remove an application.
The application is removed and I don't have any problems (that I know of) with my BB.
It just worries me that every single time I do this, I get this message. Anyone know why? Do I need to upgrade/update something?
Thanks in advance.

It looks to me like it is a problem on your Windows computer not being able to start an application. See the following link to Microsoft Community support (although the specifics of the problem in that case may not be applicable) and also note all of the "Related Content" at the upper right side of that link (and there may be others if you search that forum). http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-applicatio n-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17
It may help if you know or can determine which program Windows is trying to open when you upload photos -- there can be many different ones and it can be set by the user. If you are using Windows 7, you may need to check your Autoplay settings. There are some instructions in the following link that may help and that discuss how you can use Windows Explorer to manually transfer the photos: http://support.apple.com/kb/HT4083

Fatal Error: iBA crashes every 2 hours

I have lots of crashes with iBookAuthor. During typing, the app suddenly closes without saving. Have lost lots of work because - there is not Autosave and when I'm in the flow I dont save for half an hour...
This is what the console app says about it:
03.02.14 14:47:20,329 iBooks Author[3900]: CGContextSetShouldSmoothFonts: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Does this make any sense to anybody?
What should I do? I have some JPGs in the text. Should I throw them out? The book already has about 250 pages. I'm about to migrate to Pages.
Any ideas? Suggestions? Pity?
Jochen
www.jochenschmidt.de

Do you have other application and folder windows open or application minimised and not in use? If so they are taking up memory and its better to close anything and everything you do not really need available.
Its no good blaming iBooks Author for not saving your work, if you know your machine crashes, its a simple mattter to save every paragraph or so. Its also wise to save a copy on a separate storage drive.
.jpg and .png are OK to use - but remember they have to be an acceptable size, full details in the Asset guide and in Media in the help files. 1024 x 768 or 2048 x 1536 maximum.
Not sure if the console report is saying the application as a problem or if the problem is due to the content in current use.
I suggect you save everything in two places and using "Appdelete" or similar, unintsall iBA check the library to ensure all entries are removed and shut your maching down. After too many years with Windows, I also remove the power plug so everything drains and after a minute re-boot and download iBA from the store.
You lose nothing by doing so.

Safari[454] error: clip:invalid context 0x0 serious error will become a fatal error

I keep getting a repetitive message in Console about Safari (even after the Mac OS X 10.9.3 Update). Can someone please tell me how to make this go away? I have only installed Safari from the Mac App Store with Mac OS X updates or Safari updates. Therefore, how can I fix this problem, as the error message states? This is an Apple software problem ...
5/15/14 8:13:16.787 PM Safari[454]: clip: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.

I am getting spinning wheels on launching Apple apps (Mail, iPhoto, Finder etc). At log in my dock is taking literally one to two minutes to appear, instead of seconds. Launchpad icons take forever to actually display the icons (they come up empty until the dock finally appears). Apps are not updating automatically in the App Store, even though all settings are set for them to update automatically (and have been forever). Stuff like that.
The only thing showing up in System Preferences under StartUp Disk is Macinstosh HD:

Fatal Error - version Cue- no updates PS -CS 4 Extended

Similar Messages

Maybe you are looking for