Fatal Error when starting Power Saver on Tecra M9

When I try to start Power Saver on a Tecra M9 (21), I get a Fatal error; code: 0X51A.
I've tried various combinations of uninstalling, cleaning registry, rebooting, etc., but everytime I reinstall (version 7), I get the same fatal error.

Hi
You are speaking about the Power saver for XP? Am I right?
Please note that you have to install all drivers, tools and utilities in the right order!!!
The installation instruction should be checked and you should follow the guide lines.
Very important;
The common modules is a necessary tool to get all other Toshiba tools running properly. Furthermore there is a power saver driver and utility. The driver must be installed before the utility!!!
Please dont forget this!!!

Similar Messages

Captivate fatal error when trying to save.

I've been recording successfully in Captivate. All of a sudden, I get an error when I try and save screen changes. The message displays "fatal error has ocurred and the application is being terminated. Adobe Captivate has tried to save the work in respective project folders a cpbackup files. Please restart Captivate. The error keeps occuring on a particular project that I am working on. Please advise - why is this happening?

It sounds like you either have a corrupt slide, or some element of a slide in your project has become corrupted.
The easiest way I've found to locate the issue and resolve it is to open the project, and then create another project of the same dimensions. Once you have two projects showing in Captivate tabs, paste a few slides from the suspect one into the new one and try saving each time.
If the corruption stems from some object ID conflict (where two objects are fighting over the same ID) then pasting slides into a new project should get rid of that issue because Captivate renames all elements when copying and pasting. If the corruption is not elminated this way, then you will locate the issue as soon as you try to paste and save the corrupted slide/s into the new project.
Remember to always have the preference set to save project backups. Captivate 5x rarely corrupts, but it is still possible.

[OSS 4] Fatal error when starting oss-linux-free

I receive the following error when attempting to start this daemon as the thread title states. I've tried running the command as root with no difference. OSS was installed from PKGBUILD. I did not receive any strange (to me, anyway) errors/warnings during compiling. Arch64 install.
sudo /etc/rc.d/oss-linux-free start
:: Starting OSS/Open source driver [BUSY]
Relinking OSS kernel modules for "2.6.24-ARCH SMP preempt mod_unload "
This may take few moments - please stand by...
OSS build environment set up for REGPARM kernels
Building module osscore
Failed to compile OSS
make -C /lib/modules/2.6.24-ARCH/build M=/usr/lib/oss/build modules
make[1]: Entering directory `/usr/src/linux-2.6.24-ARCH'
Building modules, stage 2.
MODPOST 1 modules
FATAL: section header offset=8737600 in file 'vmlinux' is bigger then filesize=3174400
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.24-ARCH'
make: *** [default] Error 2
Relinking the OSS kernel modules failed
[FAIL]
Any insight into the problem would be a huge help and very appreciated.

Topic started on the 4Front OSS forums.
http://4front-tech.com/forum/viewtopic.php?t=2602

Error when starting Power shell on Windows 2112 r2

Using Windows 2012 r2 and trying to start Power Shell and it keeps shutting down with will advise once we find a solution to error.
In the event log I get two errors. How can I fix this error?
Thanks
Event error #1
- System
- Provider
   [ Name] .NET Runtime
   - EventID 1023
   [ Qualifiers] 0
   Level 2
    Task 0
    Keywords 0x80000000000000
   - TimeCreated
   [ SystemTime] 2014-08-25T19:39:25.000000000Z
   EventRecordID 12193
   Channel Application
    Computer webserver
    Security
- EventData
   Application: powershell.exe Framework Version: v4.0.30319 Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FFAAB411DF1 (00007FFAAB210000) with exit code 80131506.
Event error # 2
- System
- Provider
   [ Name] Application Error
   - EventID 1000
   [ Qualifiers] 0
    Level 2
    Task 100
    Keywords 0x80000000000000
   - TimeCreated
   [ SystemTime] 2014-08-25T19:39:25.000000000Z
    EventRecordID 12194
    Channel Application
    Computer webserver
    Security
- EventData
   powershell.exe
   6.3.9600.16384
   5215ef23
   clr.dll
   4.0.30319.34014
   52e0b86c
   c0000005
   0000000000201df1
   dec
   01cfc09c4202d5d8
   C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
   C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
   84e53e8d-2c8f-11e4-80f6-00155d140b06
cjb

Hi Cjb,
I’m writing to just check in to see if the suggestions were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Security Error when starting the server - WPLS 7.0

Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]

Looks like you cannot connect to LDAP. Are you configured correctly?

Fatal error when importing Photoshop PSD files in Captivate 5.5 MAC

Hello,
I'm running Captivate 5.5 Trial on MAC OS X Snow Leopard. All of a sudden one of my PSD files started causing a fatal error when I try to import it into Captivate.
I tried resaving both captivate and PSD file, saving them under different names, restarting, etc.
What I get is "Fatal error occured, ... Restart Adobe Captivate..."
I've tried removing Preferences folder as well as clearing the cache.
Any help would be greatly appreciated...
Thanks

You can only open Cp 5.5 files with Cp 5.5.
There is no solution for opening these files in Cp 5 version.
May I ask, why did you not get a license of Cp 5.5? It's been around for over 6 months now.

Fatal error when trying to install AIR app on OSX

A user of my application is getting a fatal error when trying to install on OSX. Most installs seem to go fine so I was surprised at this one.
A portion of the OSX error report is below. Has anybody experienced anything similar? If so, were you able to identify the core problem?
Thanks in advance for any thoughts!
Daniel
Date/Time:       2013-06-13 15:50:24.666 -0700
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          1414734 sec
Crashes Since Last Report:           30
Per-App Crashes Since Last Report:   5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
VM Regions Near 0x8:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
    __TEXT                 0000000000001000-0000000000007000 [   24K] r-x/rwx SM=COW /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.AIR                      0x02b43f72 0x2800000 + 3424114
1   com.adobe.AIR                      0x02909628 0x2800000 + 1087016
2   com.adobe.AIR                      0x02909853 0x2800000 + 1087571
3   com.apple.AppKit                   0x95544970 -[NSApplication(NSAppleEventHandling) _handleAEReopen:] + 255
4   com.apple.AppKit                   0x952ec824 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 378
5   libobjc.A.dylib                    0x9a3c9628 -[NSObject performSelector:withObject:withObject:] + 77
6   com.apple.Foundation               0x94e4473a __76-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_0 + 121
7   com.apple.Foundation               0x94e44291 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 430
8   com.apple.Foundation               0x94e4408e _NSAppleEventManagerGenericHandler + 173
9   com.apple.AE                       0x97aeda35 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 331
10 com.apple.AE                       0x97ac2fbe dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
11 com.apple.AE                       0x97ac2e7d aeProcessAppleEvent + 318
12 com.apple.HIToolbox                0x9222fc58 AEProcessAppleEvent + 100
13 com.apple.AppKit                   0x952e8d4d _DPSNextEvent + 1655
14 com.apple.AppKit                   0x952e81dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
15 com.apple.AppKit                   0x952de63c -[NSApplication run] + 855
16 com.adobe.AIR                      0x0280a772 0x2800000 + 42866
17 com.adobe.AIR                      0x0280aab8 0x2800000 + 43704
18 libobjc.A.dylib                    0x9a3c95d3 -[NSObject performSelector:withObject:] + 70
19 com.simplediagrams2                0x00002f97 start + 2567
20 com.simplediagrams2                0x000025c5 start + 53
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib             0x9263d9ae kevent + 10
1   libdispatch.dylib                  0x97b75c71 _dispatch_mgr_invoke + 993
2   libdispatch.dylib                  0x97b757a9 _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 3:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 4:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 5:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 6:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x997810e0 pthread_cond_timedwait$UNIX2003 + 70
3   com.adobe.AIR                      0x02d1b13f 0x2800000 + 5353791
4   com.adobe.AIR                      0x02d60c0e 0x2800000 + 5639182
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 7:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 8:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x02b43f55 ecx: 0x95b40466 edx: 0x00000000
edi: 0x00000000 esi: 0xbfffef18 ebp: 0xbfffee58 esp: 0xbfffeda0
   ss: 0x00000023 efl: 0x00210282 eip: 0x02b43f72   cs: 0x0000001b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x00000008
Logical CPU: 1

Hi Daniel,
Could you post or send me ([email protected]) the entire crash log? I'll at least need the binaries section so I can properly symbolicate the log.
Thanks,
Chris

Errors when Starting Agents in PCo 15.0 SP3

We are in the process of upgrading to PCo 15.0 and are getting the following error when starting an agent. We used the same configuration and setup using PCo 2.3 with no issue but we are having issues with PCo 15.0 SP3. This issue is happening on both DA and HDA agents. Has anyone see this before:
1910     Manufacturing Fault: REASON = FileNotFoundException
Could not load file or assembly 'WebSocket, Version=15.0.3.2284, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.; SEVERITY = Fatal
STACK TRACE:
    at SAP.Manufacturing.Connectivity.Protocol.Custom.PCoQueryListener.Start()
   at SAP.Manufacturing.Connectivity.AgentBase.InitializeProtocol()
   at SAP.Manufacturing.Connectivity.AgentBase.Start()
Thanks,
George

HI George,
Re-apply the PCo Installer, expand the list of installation items, and scroll down to Additional Components to select Websockets, and deploy. That should correct your issue.
Regards, Steve
Message was edited by: Steve Stubbs

Error message while Power Saver installation on Satellite A200

Hello,
I have an error message when installing Power Saver on PSAECE A200 -14D: 1612 error the installation source for this product is not available. Verify that the source exists and you can access it.
What could be the problem?
Thanks.

OK, reinstalled XP, and problem solved.

Error when trying to save/apply in OAM Console (credential store / wallet)

So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
And in the log files this also appears:
<Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
Any help would be greatly appreciated!
Thanks,
Chris
Edited by: ch**** on Mar 29, 2013 12:29 PM

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

My X61 freezes when in Power Saver mode

My X61 freezes when in Power Saver mode. I do a little work and it freezes. Any ideas?

Hello,
please tell us your operating system and model, not S/N number.
Also take a look into your event manager/viewer.
You´ll find it under start-->control panel>administration
Message Edited by Agotthelf on 05-11-2008 03:41 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Unknown file error when try to save project

We are experiencing a problem with some of our Final Cut Pro edit suites. An editor opens, or starts a new, project and makes some changes. When they try to save the project they get an error - File Error: Unknown file.
This doesn't happen often, but it usually happens at the worst possible times.
Does anyone have any ideas on what might be causing this?

I have the same problem. I get the following error when trying to save:
operation not allowed
I'm usually aware of this when working along and then that pops up. It happens when autosave cannot save. When I try to manually save I get the same error message.
This has happened twice after working for a couple hours. If I wait, it still will not save. The only solution is to shut down FCP without saving, restart, and the restore from the last autosave before the problem. I usually use about 45 minutes to an hour's worth of work.
I have no idea what causes this.

Error when starting work item

Hi
We are having SRM5.0.
Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
Contract is created and getting message Contract created.
But when tried to release the contract it shows "Awaiting approval".
In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
What could be the reason. Please let me know the solution if anyone of you come across such error.
Thanks in advance
Jagadish

Masa
It is maintained as General task already.
It seems the workflow task WS14000085 does not have definition.
When checked in SWDD for the above teask there are no steps defined for that workflow.
SAP says that we need to define and action for workflow WS14000085.
But what is the procedure to define the workflow.
I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
Anyone of you know how to define the workflow and activate the same?
Regards
Jagadish

Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngA

Hi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

Fatal Error when starting Power Saver on Tecra M9

Similar Messages

Maybe you are looking for