Fatal error when trying to execute a dml-command with OLAP API
Hi,
when I created an OracleConnection using the jdbc thin driver. The connection works fine.
But when I try to execute any dml-command with an SPLExecutor the following fatal error occurs:
oracle.express.idl.util.OlapiException: ORA-37118: Message 37118 not found; product=RDBMS; facility=ORA
ORA-06512: at "SYS.GENCONNECTIONINTERFACE", line 66
ORA-06512: at line 1
Any Suggestions ?
Hi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar
Similar Messages
-
Fatal error when trying to install AIR app on OSX
A user of my application is getting a fatal error when trying to install on OSX. Most installs seem to go fine so I was surprised at this one.
A portion of the OSX error report is below. Has anybody experienced anything similar? If so, were you able to identify the core problem?
Thanks in advance for any thoughts!
Daniel
Date/Time: 2013-06-13 15:50:24.666 -0700
OS Version: Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report: 1414734 sec
Crashes Since Last Report: 30
Per-App Crashes Since Last Report: 5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
VM Regions Near 0x8:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
__TEXT 0000000000001000-0000000000007000 [ 24K] r-x/rwx SM=COW /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.adobe.AIR 0x02b43f72 0x2800000 + 3424114
1 com.adobe.AIR 0x02909628 0x2800000 + 1087016
2 com.adobe.AIR 0x02909853 0x2800000 + 1087571
3 com.apple.AppKit 0x95544970 -[NSApplication(NSAppleEventHandling) _handleAEReopen:] + 255
4 com.apple.AppKit 0x952ec824 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 378
5 libobjc.A.dylib 0x9a3c9628 -[NSObject performSelector:withObject:withObject:] + 77
6 com.apple.Foundation 0x94e4473a __76-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_0 + 121
7 com.apple.Foundation 0x94e44291 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 430
8 com.apple.Foundation 0x94e4408e _NSAppleEventManagerGenericHandler + 173
9 com.apple.AE 0x97aeda35 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 331
10 com.apple.AE 0x97ac2fbe dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
11 com.apple.AE 0x97ac2e7d aeProcessAppleEvent + 318
12 com.apple.HIToolbox 0x9222fc58 AEProcessAppleEvent + 100
13 com.apple.AppKit 0x952e8d4d _DPSNextEvent + 1655
14 com.apple.AppKit 0x952e81dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
15 com.apple.AppKit 0x952de63c -[NSApplication run] + 855
16 com.adobe.AIR 0x0280a772 0x2800000 + 42866
17 com.adobe.AIR 0x0280aab8 0x2800000 + 43704
18 libobjc.A.dylib 0x9a3c95d3 -[NSObject performSelector:withObject:] + 70
19 com.simplediagrams2 0x00002f97 start + 2567
20 com.simplediagrams2 0x000025c5 start + 53
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x9263d9ae kevent + 10
1 libdispatch.dylib 0x97b75c71 _dispatch_mgr_invoke + 993
2 libdispatch.dylib 0x97b757a9 _dispatch_mgr_thread + 53
Thread 2:
0 libsystem_kernel.dylib 0x9263c8e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x996fb280 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x99781095 pthread_cond_wait$UNIX2003 + 71
3 com.adobe.AIR 0x02d1b113 0x2800000 + 5353747
4 com.adobe.AIR 0x02b4d5dc 0x2800000 + 3462620
5 com.adobe.AIR 0x02d1b22d 0x2800000 + 5354029
6 com.adobe.AIR 0x02d1b2a7 0x2800000 + 5354151
7 com.adobe.AIR 0x02d1b342 0x2800000 + 5354306
8 libsystem_c.dylib 0x996f65b7 _pthread_start + 344
9 libsystem_c.dylib 0x996e0d4e thread_start + 34
Thread 3:
0 libsystem_kernel.dylib 0x9263c8e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x996fb280 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x99781095 pthread_cond_wait$UNIX2003 + 71
3 com.adobe.AIR 0x02d1b113 0x2800000 + 5353747
4 com.adobe.AIR 0x02b4d5dc 0x2800000 + 3462620
5 com.adobe.AIR 0x02d1b22d 0x2800000 + 5354029
6 com.adobe.AIR 0x02d1b2a7 0x2800000 + 5354151
7 com.adobe.AIR 0x02d1b342 0x2800000 + 5354306
8 libsystem_c.dylib 0x996f65b7 _pthread_start + 344
9 libsystem_c.dylib 0x996e0d4e thread_start + 34
Thread 4:
0 libsystem_kernel.dylib 0x9263c8e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x996fb280 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x99781095 pthread_cond_wait$UNIX2003 + 71
3 com.adobe.AIR 0x02d1b113 0x2800000 + 5353747
4 com.adobe.AIR 0x02b4d5dc 0x2800000 + 3462620
5 com.adobe.AIR 0x02d1b22d 0x2800000 + 5354029
6 com.adobe.AIR 0x02d1b2a7 0x2800000 + 5354151
7 com.adobe.AIR 0x02d1b342 0x2800000 + 5354306
8 libsystem_c.dylib 0x996f65b7 _pthread_start + 344
9 libsystem_c.dylib 0x996e0d4e thread_start + 34
Thread 5:
0 libsystem_kernel.dylib 0x9263c8e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x996fb280 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x99781095 pthread_cond_wait$UNIX2003 + 71
3 com.adobe.AIR 0x02d1b113 0x2800000 + 5353747
4 com.adobe.AIR 0x02b4d5dc 0x2800000 + 3462620
5 com.adobe.AIR 0x02d1b22d 0x2800000 + 5354029
6 com.adobe.AIR 0x02d1b2a7 0x2800000 + 5354151
7 com.adobe.AIR 0x02d1b342 0x2800000 + 5354306
8 libsystem_c.dylib 0x996f65b7 _pthread_start + 344
9 libsystem_c.dylib 0x996e0d4e thread_start + 34
Thread 6:
0 libsystem_kernel.dylib 0x9263c8e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x996fb280 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x997810e0 pthread_cond_timedwait$UNIX2003 + 70
3 com.adobe.AIR 0x02d1b13f 0x2800000 + 5353791
4 com.adobe.AIR 0x02d60c0e 0x2800000 + 5639182
5 com.adobe.AIR 0x02d1b22d 0x2800000 + 5354029
6 com.adobe.AIR 0x02d1b2a7 0x2800000 + 5354151
7 com.adobe.AIR 0x02d1b342 0x2800000 + 5354306
8 libsystem_c.dylib 0x996f65b7 _pthread_start + 344
9 libsystem_c.dylib 0x996e0d4e thread_start + 34
Thread 7:
0 libsystem_kernel.dylib 0x9263d0ee __workq_kernreturn + 10
1 libsystem_c.dylib 0x996f90ac _pthread_workq_return + 45
2 libsystem_c.dylib 0x996f8e79 _pthread_wqthread + 448
3 libsystem_c.dylib 0x996e0d2a start_wqthread + 30
Thread 8:
0 libsystem_kernel.dylib 0x9263d0ee __workq_kernreturn + 10
1 libsystem_c.dylib 0x996f90ac _pthread_workq_return + 45
2 libsystem_c.dylib 0x996f8e79 _pthread_wqthread + 448
3 libsystem_c.dylib 0x996e0d2a start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x02b43f55 ecx: 0x95b40466 edx: 0x00000000
edi: 0x00000000 esi: 0xbfffef18 ebp: 0xbfffee58 esp: 0xbfffeda0
ss: 0x00000023 efl: 0x00210282 eip: 0x02b43f72 cs: 0x0000001b
ds: 0x00000023 es: 0x00000023 fs: 0x00000000 gs: 0x0000000f
cr2: 0x00000008
Logical CPU: 1Hi Daniel,
Could you post or send me ([email protected]) the entire crash log? I'll at least need the binaries section so I can properly symbolicate the log.
Thanks,
Chris -
Fatal error when trying to add derived table
Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PMHi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik -
Oracle Fatal error when trying to connect through sqlplus
Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
MannuHave you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel -
I am getting a -50 error when trying to sync my IPOD Classic with XP.
I am getting a -50 error message when trying to sync my IPOD Classic with ITunes. My computer is running WIndows XP.
Given that you're on XP, we'd better try the following document:
iTunes displays -50 error message when syncing iPod on Windows XP -
Getting errors when trying to execute CRUD programs
Hi All
I am trying to execute one of the CRUD programs for creating , updatying or deleting data in MDM server and a m getting a few errors .Could anybody advise.
Created on Jun 6, 2007
package com.sap.nw.mdm.rig;
import com.sap.nw.mdm.rig.programs.data.blobs.BLOBDataProgram;
import com.sap.nw.mdm.rig.programs.data.checkout_checkin_rollback.CheckOutCheckInRecordsProgram;
import com.sap.nw.mdm.rig.programs.data.crud.CRUDDataProgram;
import com.sap.nw.mdm.rig.programs.data.crud.bulk.BulkCRUDDataProgram;
import com.sap.nw.mdm.rig.programs.data.keymapping.KeyMappingProgram;
import com.sap.nw.mdm.rig.programs.data.search.SearchProgram;
import com.sap.nw.mdm.rig.programs.data.search.attribute.AttributeSearchProgram;
import com.sap.nw.mdm.rig.programs.data.search.field.FieldSearchProgram;
import com.sap.nw.mdm.rig.programs.data.syndication.SyndicationProgram;
import com.sap.nw.mdm.rig.programs.data.workflow.WorkflowProgram;
import com.sap.mdm.data.RegionProperties;
import com.sap.nw.mdm.rig.repository.Repository;
import com.sap.nw.mdm.rig.server.Server;
This class is the starting point to execute all sample programs.
To see a description of the various programs you can execute, please have a look at the
documentation for the following classes. There are static variables in each of these
classes that point to the various programs that can be executed with a description of
what the program does.
<ul>
<li>{@link com.sap.nw.mdm.rig.programs.data.blobs.BLOBDataProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.checkout_checkin_rollback.CheckOutCheckInRecordsProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.crud.CRUDDataProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.crud.bulk.BulkCRUDDataProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.keymapping.KeyMappingProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.search.SearchProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.search.attribute.AttributeSearchProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.search.field.FieldSearchProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.syndication.SyndicationProgram}
<li>{@link com.sap.nw.mdm.rig.programs.data.workflow.WorkflowProgram}
</ul>
@author Richard LeBlanc
public class Application {
private Application() {
Starts the application and executes a program
@param args - not required
static public void main(String[] args) {
System.out.println("876876");
Application app = new Application();
System.out.println("11111");
Program program = null;
System.out.println("22222");
Simply uncomment the line that contains the program you wish to execute and run this class.
Blob Programs
// program = BLOBDataProgram.RETRIEVE_AND_WRITE_IMAGE_TO_FILE;
// program = BLOBDataProgram.RETRIEVE_AND_WRITE_PDF_TO_FILE;
Checkout/Checkin Data Programs
// program = CheckOutCheckInRecordsProgram.CHECK_OUT_NEW_CHECK_IN;
// program = CheckOutCheckInRecordsProgram.CHECK_OUT_NEW_ROLLBACK;
// program = CheckOutCheckInRecordsProgram.CHECK_OUT_EXISTING_CHECK_IN;
// program = CheckOutCheckInRecordsProgram.CHECK_OUT_EXISTING_ROLLBACK;
Create Read Update Delete (CRUD) Data Programs
// program = CRUDDataProgram.CRUD_HIERARCHY_TABLE;
program = CRUDDataProgram.CRUD_MAIN_TABLE;
// program = CRUDDataProgram.CRUD_MAIN_TABLE_WITH_FLAT_AND_HIERARCHY_LOOKUP_FIELDS;
// program = CRUDDataProgram.CRUD_MAIN_TABLE_WITH_QUALIFIED_LOOKUP_FIELD;
// program = CRUDDataProgram.CRUD_MAIN_TABLE_WITH_TAXONOMY_LOOKUP_FIELD;
// program = CRUDDataProgram.CRUD_TAXONOMY_TABLE_WITH_ATTRIBUTES;
System.out.println("333333");
Bulk Create Read Update Delete (CRUD) data programs
(many records at once)
// program = BulkCRUDDataProgram.BULK_CRUD_MAIN_TABLE;
KeyMapping Programs
// program = KeyMappingProgram.RETRIEVE;
Search Programs
// program = SearchProgram.DRILL_DOWN_SEARCH;
// program = SearchProgram.KEYWORD;
// program = SearchProgram.MASK;
// program = SearchProgram.NAMED_SEARCH;
// program = SearchProgram.QUALIFIER;
Attribute Search Programs
// program = AttributeSearchProgram.COUPLED_NUMERIC;
// program = AttributeSearchProgram.NUMERIC;
// program = AttributeSearchProgram.TEXT;
Field Search Programs
// program = FieldSearchProgram.BOOLEAN;
// program = FieldSearchProgram.CURRENCY;
// program = FieldSearchProgram.LITERAL_DATE;
// program = FieldSearchProgram.LOOKUP;
// program = FieldSearchProgram.TEXT;
Syndication Programs
// program = SyndicationProgram.SYNDICATE_PORT;
Workflow Programs
// program = WorkflowProgram.EXECUTE;
//TODO enter MDS name
String mdsName = "172.18.139.200"; //the name of the Master Data Server
String repositoryName = "GDS_1"; //make sure this is the name you use when unarchiving
//the repository otherwise change it to reflect the name
//of your repository
String regionName = "English [US]";
String userName = "Admin"; //there is an admin user with no password in the provided repository
String password = ""; //there is an admin user with no password in the provided repository
System.out.println("67r86587");
app.start(mdsName, repositoryName, regionName, userName, password, program);
Establishes a connection to the given server and logs in to the given repository
with the given logon information and executes the given program
private void start(String serverName, String repositoryName, String regionName,
String user, String password, Program program) {
//Create an instance of the MDS
Server server = Server.getInstance(serverName);
System.out.println("444444");
//Get the list of running repositories from the server
Repository[] repositories = server.getRepositories();
System.out.println("5555");
Repository repository = null;
//Go through the list of repositories and see if any match the
//given repository name
for(int i=0, j=repositories.length; i<j; i++){
System.out.println("666666bbye");
if(repositories<i>.getIdentifier().getName().equals(repositoryName)) {
System.out.println(" hello" +repositoryName);
repository = repositories<i>;
System.out.println(" hi" + repository);
//Get the list of regions for the repository
RegionProperties[] regions = repository.getRegions();
RegionProperties region = null;
//Go through the list of regions and see if any match the given
//repository name
for(int i=0, j=regions.length; i<j; i++){
System.out.println(" hello");
if(regions<i>.getName().equals(regionName)) {
region = regions<i>;
System.out.println(" 99999" +region);
//Login to the repository as you would using the Data Manager
//This creates a user and repository session that are available using
//repository.getSession()
repository.login(region, user, password);
//execute the program from the list above
program.execute(repository);
System.out.println(" finally");
//destroy the session (destroys the repository and user sessions)
repository.getSession().destroy();
//close the connection to the MDS
repository.getServer().closeConnection();
I am getting the following errors:
Exception in thread "main" java.lang.IllegalArgumentException: Table with Code 'Products' does not exist in the repository 'GDS_1'
at com.sap.mdm.internal.schema.RepositorySchemaImpl.getTableSchema(RepositorySchemaImpl.java:136)
at com.sap.nw.mdm.rig.programs.data.crud.CRUDMainTableRecordProgram.execute(CRUDMainTableRecordProgram.java:33)
at com.sap.nw.mdm.rig.Application.start(Application.java:211)
at com.sap.nw.mdm.rig.Application.main(Application.java:157)Hi Stephen,
I assume that a super admin user does not get these error messages, right? If so, this behaviour might come due to missing permissions on PCD objects for the user rubinmd. Please apply note 792370 which explains how to set end user permission on the pcd folder com.sap.ip.collaboration/Rooms
Kind regards,
Roland -
Error when trying to execute ODI Interface
Hello,
I receive the following error when I try to execute an ODI interface. The interface contains two models trying to load a .csv file into an Oracle table. The models seem to be working and I can right click on the source file and "View Data". I have specifed LKM File To Oracle (SQLLDR), IKM Oracle Incremental Update, and CKM Oracle. But still receive this error on the fourth step of the execution "Loading - SS_0 - call sqlldr via Jython"
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?
OS command has signalled errors
at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Thank you for your helpAlmost...
You need the sql loader where the "OS command" will execute it means where the agent is installed (once you will execute it from an agent when at production).
AND that machine where the agent is, need to "see" the target database through the Oracle Listener (tnsnames)....
Is just like to execute a Sql Loader from you own machine, but who write the command will be ODI.
Does it make any sense to you?
Message was edited by:
Cezar Santos -
Runtime error when trying to execute transaction OB58
Hi all,
We have upgraded from SAP system 4.6c to ECC 6.0 . We are facing one error in the FI transaction OB58.
When trying to delete any finanicial version or trying to create any new financial version , we are getting a runtime error which
states that " Error when attempting to IMPORT object "X011F". and its giving short dump at this point .The description of the error is :
Short text
Error when attempting to IMPORT object "X011F".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "FSV_POSITIONS_CONVERT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "X011F", the component 1 in the dataset
had a different length from the corresponding component of the
target object in the program "SAPLFAGL_FSV".
The length is 4 in the dataset, but 32 in the program.
Thanks,
SumitHi Sumit,
We Upgraded our system from 4.6C to ECC 6.0 and
I am facing same error. We applied note 1544367. After applying not also we are facing issue during
import x011p to lt_x011p
i011z to lt_x011z
x011v to lt_x011v
x011s to lt_x011s
x011f to lt_x011f
from database rfdt(bs) client p_mandt
id p_versn
accepting padding
ignoring conversion errors.
You faced same issue after applying note or if you have any solution please let me know.
Regards,
Mahesh -
URGENT: ERROR when trying to execute ssoexp.csh script
Hello,
I am trying to execute the ssoexp.csh script and I keep getting an error. Here is some background info:
I am running the ssoexp.csh (UNIX) script from the production server.
Steps:
- Set the environment to the source <Portal_home>
- cd to the directory where the script is located
- set the ORACLE_SID to my development database (because I previously received an error that indicated to set the ORACLE_SID)
- ssoexp.csh -s portal30_sso -p ****** -d sspexp.dmp -c oracle.database
I get the following error:
SP2-0642: SQL*Plus internal error state 2165, context 4294967295:0:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:2:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:2:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:8:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:3:0
Unable to proceed
SP2-0152: ORACLE may not be functioning properly
LRM-00109: could not open parameter file 'so_export.par'
LRM-00113: error when processing file 'so_export.par'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
PLEASE HELP!!!
Thank you,
Claudia ZanniHi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar -
Fatal Error when trying to update BB
Ok, trying to keep short. System worked. Running 4.7 on desktop with outlook 07 on Vista. UPdated desktop to V.6. Would no longer recognize any of my 200+ media files. So I reinstalled 4.7. Now I can upload my media, but it will not sync with the rest of my data. All I get is a fatal error.
I know the problem is that the BB Curve 8900 is working on V.6 and the Desktop is running on V4.7, but how do I fix this. I have rebooted and reinstall computer and desktop software. Did not work. I tried to limit the updated modules to try and narrow the error down to a module. After two hours of trying one at a time. They all Fatal errored.
I am to the point that the only solution is to do a hard reset on the BB. The problem with that is that I have registered media on the BB that can not be reinstalled. Am I going to have to Pay for the Media again just because BlackBerry can't write software that works?
Any input and advice would be appreciated. Thanks.Hiya!
Hard reset has been know to cause some issues with content... but in rare cases and usually only if you have that file open when you pull the battery.
So a battery pull shouldnt affect it.
Or were you referring to a wipe handheld?
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on -
Captivate fatal error when trying to save.
I've been recording successfully in Captivate. All of a sudden, I get an error when I try and save screen changes. The message displays "fatal error has ocurred and the application is being terminated. Adobe Captivate has tried to save the work in respective project folders a cpbackup files. Please restart Captivate. The error keeps occuring on a particular project that I am working on. Please advise - why is this happening?
It sounds like you either have a corrupt slide, or some element of a slide in your project has become corrupted.
The easiest way I've found to locate the issue and resolve it is to open the project, and then create another project of the same dimensions. Once you have two projects showing in Captivate tabs, paste a few slides from the suspect one into the new one and try saving each time.
If the corruption stems from some object ID conflict (where two objects are fighting over the same ID) then pasting slides into a new project should get rid of that issue because Captivate renames all elements when copying and pasting. If the corruption is not elminated this way, then you will locate the issue as soon as you try to paste and save the corrupted slide/s into the new project.
Remember to always have the preference set to save project backups. Captivate 5x rarely corrupts, but it is still possible. -
Why the Fatal Error when trying to preview or edit audio in Cp 8?
I installed Cp 8 last week. (Been using Cp 3 for years, finally made the leap). Made a presentation on Cp 8 just fine -- everything worked wonderfully. Preview ... audio edits ... everything was fine.
This week I'm working on another presentation and suddenly the program goes into a fatal error EVERY TIME I try to preview it.
So --- I continued creating my presentation without previewing anything, and then recorded audio for the project. But when I went to edit the audio, BAM - another fatal error.
This is not good. :-)
Anyone else have this problem? Any known solutions?Sorry -- not much geek in my blood, so I forget to provide that info. :-)
OS: Win 7
The program is installed on my desktop, and there is no network. It's only my computer.
Yes, there is PLENTY of space.
I downloaded the program last week with the help of Adobe Tech support, because the program would not install. An error kept appearing saying it was missing a file. Spent 7 hours on Christmas Eve working with tech support in New Delhi, 1.5 hours of which was on the phone with the tech support having remote control of my computer. We finally figured out that AVG was preventing the install, so we deactivated AVG and then the program installed just fine.
As I said, I've been using Cp 3 for YEARS, so I'm familiar with what Cp is capable of doing. I created a project two days after Christmas and everything worked just find. Was able to preview anytime I wanted, and had no problem editing my audio.
Then without making any other changes to my computer's configuration, two days ago I was working on another presentation and went to preview the slide. The program reached 58% and then gave a fatal error, forcing shutdown. I thought I might be a hiccup, so I closed everything down and rebooted the computer, but still the same problem every time I tried to preview. I had half a dozen attempts, and each time a fatal error, always at the place where it says 58% complete (for the preview).
So --- I went ahead and completed the slide layouts without previewing anything, and figured I would add the audio, edit it, and publish the presentation. I recorded the audio (my voice) just fine, but when I tried to edit it (audio > edit > project), the system experienced a fatal error, again at the 58% mark of preparation.
My presentations are saved and backed up ... I've been thinking that I need to uninstall / reinstall the program, but after spending 7 hours doing that on Christmas Eve, I was hoping there might be an alternative solution. -
Adobe Captivate 6.0 fatal error when trying to publish
Currently working on Adobe Captivate 6.0 and recently have experienced a fatal error message when trying to publish my project. The fatal error message creates a backup and requests to restart Adobe Captivate.
Hello ,
Welcome to Adobe Forums!
Could you please check the exact version of Adobe Captivate you are using (Go to help > About Adobe Captivate)?
Are you having the same issue with other projects as well ?
Please make sure the project files and published folder should be on local computer and not on any network location.
Thanks
Himanshu -
Error when tried to execute ODI interface for Essbase
Hi,
I am trying to load metadata from a file to Essbase. Bur when i am trying to execute the interface, i am getting an error. It reads as follows
Cannot start execution
The sourcedatatype is null for the column : ParentName and the technology: Hyperion essbase.Hi John,
I have gone ahead and deleted the Hyperion essbase technology and imported it similar to Hyperion Planning. Now i am able to see only 3 datatypes. Date, String and Numeric.
I have setup all the connections and created the interface also.
But when i executed it i got the following error
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 35, in ?
AttributeError: class 'com.hyperion.odi.common.ODIConstants' has no attribute 'READER_TYPE'
at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)
What is the mistake i have done. Please let me know -
Fatal error when trying to load illustrator on windows 8.1.
I deactivated cs5 on my windows xp and loaded the cs5 disk onto new windows 8 computer. But illustrator will not load, shows fatal error, does not even show in the menu of programs on disk, but if I stick the disk back into the xp machine, it loads fine back onto old computer. What gives?
Hi Jacob, I really don't understand this answer. My new computer is way more powerful than the xp. And the CS5 illustrator that I am loading is part of the whole CS5 Suite, which have the same system requirements as Illustrator and the rest of the the programs, Photoshop, acrobat, dreamweaver, indesign, etc. loaded fine.
So just to reclarify. This is the CS5 Design suite that I deactivated on the XP Machine and loaded to a new computer that runs on Windows 8 and 8.1 and all the programs load and show in the menu when you first put the disk in so you can choose how and what to load. Now when I put the disk in on the Windows 8....illustrator is not showing on the list of programs, but when you load all....I get this fatal error that illustrator could not load. So it sees it somehow....Now when I go back to the XP computer. Put the disk in. Illustrator shows in the menu as does the other programs, and it loads fine on the xp machine. I want to eventually get rid of the xp computer because, well it will be part of the dead past soon enough. So any ideas.
Maybe you are looking for
-
Want to transfer in read only mode
Hi All I had created one form and one report.i want when user enter the data in form that time data will save in intereactive report which already in same page.And the data which i fill in the form that would be reamin in form but in read only mode.A
-
I have a brand new IPad Air 2. My operating system is 8.2. I am not able to send iMessages (texts) to non Apple devices. When I attempt to, the name is in red not green. What can I do to fix this?
-
Can Ipad2 be restored and still keep some apps?
I just purchased an Ipad2 from a friend. Is it possible to restore to factory settings but still keep some of his purchased apps? I assume if I restore and sync to my itunes that i will lose his apps.
-
Dear, My client has a retail business but same as trading business means we purchased finished goods from the manufacturer and directly sell it in the market. Directly we don't care for the raw material. Client don't purchased raw material but provid
-
After Effects Compositions Duplicating over other comps in Adobe Premiere.
Hi all, My issue revolves around Adobe Premiere and After Effects, in particular the feature in Premiere which gives you the option to 'Replace with After Effects Composition'. I had severail clips I wanted to do some frame painting on in my timeline