Fatal Errors with SOAP and BingAds PHP Library

I am using the BingAds library for PHP.
I often get long periods of time where the API eventually fails.
The error messages I get are usually:
Fatal error: Uncaught SoapFault exception: [WSDL] SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/V9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/V9/CampaignManagementService.svc?singleWsdl" in [...] bingads/ClientProxy.php:183 Stack trace: #0 [...] bingads/ClientProxy.php(183): SoapClient->SoapClient('https://api.bin...', Array) #1 [...] bingads/ClientProxy.php(66): BingAds\Proxy\ClientProxy->GetProxy('https://api.bin...') #2 [...] BingAds\Proxy\ClientProxy::ConstructWithAccountId('https://api.bin...', '[...]', '[...]', '[...]', '[...]', NULL) [...]
Warning: DOMDocument::load(https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/V9/CampaignManagementService.svc?singleWsdl) [domdocument.load]: failed to open stream: HTTP request failed! HTTP/1.1 500 Internal Server Error in [...]/bingads/ClientProxy.php on line 98
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]/bingads/ClientProxy.php on line 128
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]/bingads/ClientProxy.php on line 134
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]bingads/ClientProxy.php on line 140
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]/bingads/ClientProxy.php on line 146
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]bingads/ClientProxy.php on line 152
Warning: SoapHeader::SoapHeader() [soapheader.soapheader]: Invalid namespace in [...]/bingads/ClientProxy.php on line 158
Fatal error: Uncaught SoapFault exception: [s:Server] Invalid client data. Check the SOAP fault details for more information
The second series of warnings and fatal error comes after 6 or 7 successful API calls to retrieve AdGroup and Ad data for a series of AdGroups. Eventually it fails.
Then it will work for several days, then have several days of getting errors again.
Any ideas?

Hi there,
I hope your day is going well. From your description it looks like you are loading the WSDL for every call. This is what you say:
"The second series of warnings and fatal error comes after 6 or 7 successful API calls to retrieve AdGroup and Ad data for a series of AdGroups. Eventually it fails."
Best practice is to load your WSDL once cache it, and then use it for all calls. This is different from loading the WSDL for every call. Please try that and let me know if you have any issues.
Thanks,
Itai

Similar Messages

Fatal Error has occured and the application is being terminated

It seems that Captivate is eating my projects. I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files. It set me back at least a few hours worth of work. So I started creating backup files every 10mins, regardless of how much work i've done. Everything was going fine, until I took an hour break and went to resume my work.
When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files. Please restart Adobe Captivate."
I can click on the program workspace and not click ok on the error message to keep the file open. I see my slides and objects, but all the text is missing.
I'm using Captivate 5.5 and windows 7 64. Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images. I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue. That was before this last stint of errors.
I tried opening a backup that was like 10 saves ago, but it displays the same message.
I'm not sure what to do next.

Failed to back up the data. A fatal error has occured and the application is being terminated.
This question is Not Answered.(Mark as assumed answered)
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files. Please restart Adobe Captivate.

I was trying to capture a simulation when a pop-up window came with this error:
"A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.Please restart Adobe Captivate."
I tried every possible solution but i am getting the same error. Even now, i am not able to open a blank project. I cleared Preferences and Cache, Restarted the system, uninstalled and re-installed captivate but the error occurs.
Please help.

Having admin rights is not the same as 'Run Captivate as administrator'. For the last, right-click on the start icon for Captivate and check 'Run as administrator'. Or click on Advanced, where you can check the option to always run as administrator.
Another possibility could be a corrupt font somewhere. I forgot to ask which version you are using (exact number).

HELP! Fatal error with Installation

I keep getting a fatal error with installation of version 7.6. I've uninstalled and installed it several times with the same problem. I have tried installing a older version again and now I'm getting the same error. Help!!

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Failed to back up the data. A fatal error has occured and the application is being terminated.

hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content.

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library. The library does not show up even when my iPad is connected to my PC. My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well. Help?

Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

HT203167 I set up a pc with iTunes and have my library but cannot get to new purchases, I get a pop up that says "computer not authorized" How do I authourize?

I set up an PC with iTunes and have my library but cannot get it to transfer new purchases, I get a pop up that states "computer not authorized" how do I authorize computer? account originated on a Mac

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

Fatal Error with Java ME Device Manager and SDK Updates

I recently installed the Java ME 3 EA SDK Platform which looks promising. Everything seem to work fine. In the process of new updates and the desire to remove some older versions of Java, I installed a new Java versions (1.6.0_11) and removed some old ones (1.6_0_04 and 1.6_0_10).
Following this whenever I startup my machine, following the attempted start of the Java ME Device Manager, I get a "Fatal Error: Cannot start child. Error code: 0" dialog.
Following this I get an exception indicating:
java.net.ConnectException: Connection refused: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
 at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
 at java.net.Socket.connect(Socket.java:519)
 at java.net.Socket.connect(Socket.java:469)
 at java.net.Socket.<init>(Socket.java:366)
 at java.net.Socket.<init>(Socket.java:180)
 at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
 at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
 at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
 java.net.ConnectException: Connection refused: connect
 at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
 at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
 at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
 at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
 at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
 at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
 java.net.ConnectException: Connection refused: connect]
 at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
 at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
 at javax.naming.InitialContext.lookup(InitialContext.java:392)
 at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1871)
 at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1841)
 at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
 at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:323)
 at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
 at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
 at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
 at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
 at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
 at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:56)
 at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:73)
 at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:228)
 at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:65)
 at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
 at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
 at org.netbeans.ModuleManager.enable(ModuleManager.java:888)
 at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
 at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
 at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
 at org.netbeans.core.startup.Main.getModuleSystem(Main.java:163)
 at org.netbeans.core.startup.Main.start(Main.java:315)
 at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
[catch] at java.lang.Thread.run(Thread.java:619)
When I try to start the SDK itself, I also get "Cannot find java.exe in specified jdkhome. Neither E:\java\jdk1.6.0_10\jre\bin\java.exe or E:\java\jdk11.6.0.0_10\bin\java.exe exists. Do you want to try to use default version?". This also happens with I try starting Netbeans as well.
When I say No, it appears to not start at all. When I say Yes, it appears to try to start but I continually get errors as listed above for the Java ME Device Manager startup error.
After reinstalling the _10 version, things started to work again, so I suspect this is due to my removal of the an older version of the JDK.
How is the proper way to "update" without causing similar errors? Are the environment variable JAVA_HOME, JAVA2_HOME, or some other variable used to specify the JDK/JRE in use? I would rather not be forced to change my startup each time to specify a -jdkhome related parameter.
Should I install the new version, find install the "Java Platform" in the SDK/Netbeans, set it as
Also...
How do you set the default version from within the SDK/Netbeans?
And is there a way to prevent the Device Manager from starting?
Eric

You can try this link to see if it solves your problem.
[http://java.lillegutt.com/?p=3]
Cheers,

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

"NO_RECEIVER_CASE_BE" error with SOAP Sender assigned to a Business Service

Hi all,
we have a strange error with XI3.0
We created a configuration scenario where the initial step is done by a Business System, that uses a SOAP Sender communication channel to send its request. And this works great when testing it with XMLSpy.
But we then needed to shift from a Business System to a Business Service, as the machine sending the SOAP request changed and was not anymore part of the landscape, but elsewhere.
Hence we recreated a SOAP sender which we assigned to this new business service, doing absolutely the same configuration work as for the other soap sender of the former business system.
Yet when testing it through XMLSpy, we everytime get a NO_RECEIVER_CASE_BE error back, stating that "No receiver could be determined". Yet when checking in sxi_cache, receiver determination is clearly there. All the blogs I went into are only refering to Business System for a SOAP sender, so I was wondering if any of you already managed to assign a SOAP sender to a business Service.
Regards,
Cedric

hi,
so you sue SOAP to make a query ? (sync)
or to send the data to XI ? (async)?
if async then make sure
you use Quality of Service other then BE
in your soap adapter channel
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Oracle 9.2.0.3, fatal error with DBMS_AQADM.CREATE_QUEUE_TABLE

Hi All,
I installed Oracle 9.2.0.1 and patched it with 9.2.0.3 on a Solaris 10 Sun 280R machine. I deleted the initially created database instance and created a new one using dbca after the patch installation.
However, when I am tring to install the application schema, I get a "not connected to Oracle" error in the sqlplus session and it exits. When i checked the
/opt/oracle/admin/rc1/udump/rc1_ora_7022.trc, I see
*** 2008-03-28 14:26:37.551
*** SESSION ID:(9.25) 2008-03-28 14:26:37.550
Exception signal: 10 (SIGBUS), code: 1 (Invalid address alignment), addr: 0x1, PC: [0x100d99d8c, 0000000100D99D8C]
*** 2008-03-28 14:26:37.553
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0000000100D99D8C] [SIGBUS] [Invalid address alignment] [0x000000001] [] []
Current SQL statement for this session:
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE (
QUEUE_TABLE => 'AQ_REU_TABLE',
STORAGE_CLAUSE => 'tablespace USERS',
MULTIPLE_CONSUMERS => TRUE,
QUEUE_PAYLOAD_TYPE => 'RAW',
MESSAGE_GROUPING => DBMS_AQADM.TRANSACTIONAL
END;
Could anybody give me an idea how to tackle this problem ?
Cheers,
Ulvi

ORA-7445 is very similar to ORA-600 and also the next steps to solution are the same.
You need to contact Oracle Support.
This error could be caused by some bug that may be fixed in one of later patchsets, so I agree with Daniel, you should be on 9.2.0.8 wich is the last patchset (and also terminal pathset for 9i R2).
And is it very prossible that if you will contact Oracle Support they will tell you the same - apply patchset 9.2.0.8 :-)

Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Hi all,
I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box:
Installation of these packages generated errors: SUNWiiimr
Installation of these packages generated warnings: SUNWcnetr
The zone creation log shows:
*** package -SUNWiiimr- failed to install with fatal errors:
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postin stall: /export/zones/newzone/root/lib/postrun: not found
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postinstall: /export/zones/newzone/root/lib/postrun: not found
pkgadd: ERROR: postinstall script did not complete successfully
Installation of -SUNWiiimr- on zone -newzone- failed.
*** package -SUNWcnetr- installed with warnings:
pkgadd: ERROR: unable to create package object -/export/zones/newzone/root/etc/dladm-.
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/aggregation.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/linkprop.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/secobj.conf- failed
owner name -dladm- not found in passwd table(s)
Installation of -SUNWcnetr- on zone -newzone- partially failed.
-newzone- was configured to be a whole root zone. Are there any ways to solve these installation errors?
Thanks in advance.

This problem seems some strange - this time with Solaris 10u4, from 10 containers installed on a brand new X2200 (2x cpu) only one do not output those errors, but just this one cannot install the dsee or proxy. This time the errors were from:
Installation of <SUNWxwplr> on zone <dsee-proxy> partially failed.
Installation of <SUNWdtdmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWmconr> on zone <dsee-proxy> partially failed.
Installation of <SUNWrmwbr> on zone <dsee-proxy> partially failed.
Installation of <SUNWlvmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWzebrar> on zone <dsee-proxy> partially failed.
So the machine was, too, just installed. After several hours, anoter atempt to install a zone, this time just this one, returned no errors - and the dsee installed without any complains. All configurations were for whole root zones. Used was Solaris 10u4 with the most recent patch cluster applied.

CANNOT_READ_PALOAD error with SOAP to PROXY Synchronous interface

Hi,
Problem with SOAP to PROXY Synchronous interface.
In Production client, some times we are getting the below shown error in SXMB_MONI. There is no Inbound payload also.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">CANNOT_READ_PAYLOAD</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to read payload from the message object</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please suggest me to resolve this.
Thanks in advance,
Hari.

Hi Hari,
In your case, check SAP Notes: 1082111 and 1060723.
Regards,
P.Rajesh

Fatal Errors with SOAP and BingAds PHP Library

Similar Messages

Maybe you are looking for