"fatal execution engine" error when launching labview--I just installed it?

I just installed Labview (I still have the CD in my computer) but when I double click the icon to start the program it starts the splash screen, but then issues an "internal execution engine fatal error." The only option to enter is into the JIT debugger. I have XP/SP2 and I have uninstalled my C/C++ compiler and my Ada Compiler, but I am still receiving the error. I have uninstalled Labview twice and reinstalled it, but still the same. The disk that I am installing is labeled 7.1, so I went to the website and downloaded 7.1.1 and installed it but still the same error. I tried to install Labview barebones (without drivers, CVI, etc...) but this didn't fix my problem either. I am out of ideas.
Ronnie_b

Hey Ronnie,
I know Marni personally, and I'm sure she's done her homework on this one. Unfortunately with this being an issue specific to your PC, it does sound like it might be one of those issues that is unidentifiable and seemingly "incurable" without reformatting. However, I'll double check with Marni tomorrow to make sure we've exhausted all possibilities before having you reformat.
I'll get back with you via this post.
Take care,
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

Similar Messages

  • MS Visual C++ error when launching LabVIEW 8.6

    I'm using a PC (running Windows XP) which has LabVIEW 8.6, 2009, and 2010 installed on it.  When trying to launch 8.6, I receive this runtime error:
    If I click OK on this window before the Getting Started screen initializes, I close LabVIEW.  However, If I wait until after the Getting Started screen appears, the window above becomes inactive and unusable.  I haven't tried much programming or poking around, but as far as I can tell LabVIEW behaves normally (I can open and create projects and VIs).
    Has anyone run into this before?  Any insight would be great.
    Thanks,
    Adam Fern
    Adam Fern
    Systems Engineer, CLD
    Cyth Systems, Inc.
    Solved!
    Go to Solution.

    so this Runtime error doesn't stop or effect LabVIEW if you ignore it, and if you click ok it will close LV down. Are the other versions of LV working?
    National Instruments
    Applications Engineer

  • Satellite P100: Fatal Execution Engine Error code Ox7927e03e

    The above error message (code Ox7927e03e) appears every time I restart my Satellite P100.
    Various suggestions on the Microsoft XP website to update/repair Net.Framework don't work.
    Any ideas? The computer works normally except for Media Centre which generates the same message.

    You could firstly use the Windows own system restore tool. This tool will turn back the OS to the early point. If it does not work you could use the Toshiba recovery CD. On this CD everything was preinstalled and this installation will set the notebook back to the factory settings

  • Error when launching Crystal XIR2 report ..."Table could not be found."

    We have a customer that sees an error when launching any report in InfoView for Crystal Server XIR2:
    Description: Error in File E:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\slvnsb41.pageserver\slvnsb41.pageserver\child.2\temp\procReportTemp\mgrTemp\ps_13ec5b68e6bfbc0.rpt: The table could not be found.
    These steps have been taken:
    1) The Crystal Server Business View install and BIAR file imports are successful.
    2) Database connection has been configured and tested.
    3) All the tables are browseable in the Business View Manager and contain data.
    4) All the required tables exist in the database.
    Options or suggestions anyone?

    Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve? 
    Sorry to say but I don't find these forums of much use.

  • Error when launching Photoshop CS5

    Photoshop CS5 bring up the following error when launching the application
    "The program can't start because MSVCP110.dll is missing from your computer"
    Uninstalling and resintalling the application does not resolve this problem

    http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
    Mylenium

  • Error when launching a BPF

    Hi
    I receive the following error when launching af BPF:
    System.Exception: Index was outside the bounds of the array.
       at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
       at OSoft.Services.Webservice.BPFProxy.BPFProxy.GetBPFContents(String strAppSet, String strApp, String strBPFID, String strDataRegion)
    We are running BPC 5.1 SP09-2 and accessing Excel via Citrix.
    I did work before we applied SP09-2.
    Any suggestions?
    Jesper

    After upgrading the client installation on Citrix was not correctly upgraden. Re-installing the client fils solved the problem.

  • Error when launching Key figure monitor iview in portal

    Hi all,
    I get an error when launching a key figure monitor iview in portal ; the error is RABAX-STATE
    In r/3 under transaction ST22 i got following :
    "UNCAUGHT_EXCEPTION" "CX_WDR_RT_EXCEPTION"
    "CL_WDR_INTERNAL_WINDOW========CP" or "CL_WDR_INTERNAL_WINDOW========CM00B"
    "IF_WD_WINDOW~SUBSCRIBE_TO_BUTTON_EVENT"
    Anybody knows how to resolve the problem?
    Regards
    Gwen

    Hey was your problem resolved ???
    I am facing the same problem..
    please help!!!
    reply asap.
    ~Veena.

  • Error when launching promoted app from RemoteAPP

    Hi:
    We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
    "Personalization:
    This theme can't be applied to the desktop.
    Try clicking a different theme"
    Help!
    Thank you,
    Stangride

    If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
    are manipulating themes.

  • Error when launching Acrobat XI Pro

    I get an error when launching Acrobat XI Pro:
    Adobe License Utility has stopped working.
    A problem has caused the program to stop working
    correctly.  Please close the program.

    Hi toeneez,
    Please try repairing Acrobat and check.
    Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
    Regards,
    Rave

  • After Effects Plugin Error when launching

    I recently installed Red Giant Knoll Light Magic Pro plugin and get the following error when launching AE CS4 9.02 on a 2.53Ghz Intel Macbook Pro with 4Gb Ram and Snow Leopard.
    After Effects has encountered an error.
    [/Chincillada/pro/ext/adobe/MediaCore/MediaLayer/VideoFilterHost/Make/Mac/../../Src/AEPlug inVideoFilterModule.cpp-107]
    then I get:
    After Effects can't continue: An output contract violation has occured!
    then:
    After Effects warning: Failed to initialize mediacore
    I have also lodged a support ticket with Red Giant but wanted to see if anyone had experienced, or could shed any light on this error code.
    Thanks

    As a start, move the KLF plug-in out of the shared MediaCore folder (Library:Apllication Support:Adobe and something; not on my Mac ATM) to the conventional AE plug-in folder (Applications:Adobe After Effects CS4:Support Files:Plug-Ins) I've reminded my friends at RG a hundred times, but their installer stil luses bad default locations. If that doesn't fix it, then indeed you have a problem. Which version of the plug-in are you using? Most complaints revolve around v2.5's GPU usage, which is on by default and causes a lot of trouble. Older versions do not do this, so they are more stable....
    Mylenium

  • Java Error when launching BLS

    Using xMII 11.5 SP3, one of our other xMII developers is getting the following Java error when launching the BLS editor:
    Unable to load resource: http://xmiid.oxy.com/Lighthammer/CMSLogicEditor/activation.jar
    His computer was reimaged a couple of days ago with our standard image (Windows XP SP2, IE6 SP2).  It worked fine on his computer prior to the re-image.  He's reloaded Sun Java 1.4.2_01 on his computer (our company default is 1.4.1_01.)
    I can't duplicate the error on any of our test computers - one of which was also recently re-imaged.
    Any ideas?
    David

    David,
    So other standard imaged machines are running 1.4.2_01 and have no issues?  I would expect to see problems with the webstart cookie handling for that version, but I'm running _15....
    Try clearing the Java WS cache on the problematic client instance to watch it try to download all the libraries fresh.
    File...Preferences, reconfirm that the None radio button is selected on the General tab, and then on the Advanced tab, press the Clear Folder button.
    You could also make sure before hitting the editor link in the Menu.jsp that there are no dead or leftover javaws processes running in the task manager.
    Regards,
    Jeremy

  • Adobe Premiere Pro error when launching software...

    I am getting the following error when launching Adobe Premiere Pro CS6:
    Adobe Premiere Pro could not find any capable video play modules. Please update your video display  drivers and start again.
    I checked my drivers and they are up-to-date. I am using Core I7 Windows 7. I did have Adobe Premiere CS5 installed and it worked fine. When I subscribed to the Creative Cloud I uninstalled the CS5 installation and downloaded the CS6.

    Try http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  • I am receiving the following error when launching Adobe Premiere Elements 13

    I am receiving the following error when launching Adobe Premiere Elements 13: Premiere Elements Debug Event Preferences.cpp-353 . I am running this on a Win 7 64 bit device on a Windows domain.  The user is not a network/local administrator.  Any ideas?

    RogerCHS
    Are you running the program from a Domain or Local Administrative type User Account? Apparently not Local Administrative by your description in the introduction?
    Last time we had this type of issue, the user was coming from a Domain type of account. The issue remains in that thread unresolved although there was some intervention
    by Adobe Staff.
    https://forums.adobe.com/thread/1638947?start=0&tstart=0
    Is yours a separate matter or are you related to the user in the other thread?
    Please review and consider, supply more details, and then we can decide what next.
    Thank you.
    ATR

  • HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

    I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

    First, turn off your CAPS lock.  Typing in all CAPS is considered screaming/yelling and many will simply ignore your posting.
    Are you currently having issues?  Is it when trying to purchase only on the device?  Are you able to complete purchases via iTunes on your computer?

Maybe you are looking for

  • Why can't I enable disk use on my Ipod touch?

    I wish to use my ipod touch as an external hard-drive. I have watched videos on how to go about it and they show that there is a greyed out check box that must be checked. This check box does not exist for me. Why not? and is it possible to enable di

  • Mirroring vs Closed Lid Processing Used

    Greetings, Is mirroring to an external display the same as using an external display with the lid closed? I am assuming mirroring takes more graphics processing power. What about with the lid closed? Is that the same as using just the built in displa

  • Number Ranges - Best Practise

    Can anyone advise what's the best approach if a particular number range is being used up for a sales order type? Do we assign another number range?  What if we really run of number ranges, is there anyway to reuse the number range by archiving docume

  • Accessing a method from another class

    Ok, so this is a massively simplified version of what I need to do but using the following classes, what do I need to put in the second class to call the function from the first? This class contains what I want to call: package code      public class

  • R12 AP Invoice update process after import

    Hi All, Can anyone let me know what is the process of updating the AP invoices after those are being imported. Thanks