[FATAL] [INS-30001] The ASMSNMP password is empty.

I'm receiving the following error during an 11.2.0.3 install on RedHat 5.5. There is no value to pass a password for ASMSNMP in the response file.
INFO: Validating state <ASMInstanceCredentialsGUI>
SEVERE: [FATAL] [INS-30001] The ASMSNMP password is empty.
CAUSE: The ASMSNMP password should not be empty.
ACTION: Provide a non-empty password.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <ASMInstanceCredentialsGUI>
Any help would be appreciated. Thank you

try this
# oracle.install.asm.monitorPassword=password
oracle.install.asm.monitorPassword=

Similar Messages

ASMSNMP password change

I am trying to change the ASMSNMP password on 2 Node RAC 11 g r2 on windows 2008.
I am getting the following error any idea why ?
ASMCMD> orapwusr --modify --password ASMSNMP
Enter password: Your vendor has not defined POSIX macro ECHO, used at C:\app\11.2.0\grid\lib/asmcmdshare.pm line 2623
C:\>
Regards,

Hi,
I believe orapwusr --modify --password utility is only valid for sys user , you can change the ASMSNMP using alter user command..

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.

How do I end requirement to enter a password to empty the trash on my MacMini?

How do I end the requirement to enter a password to empty the trash on my MacMini?

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

I have tried all of the suggestions -passwords and logins are not saving. The lists are empty. Please help.

I imported my profile from my other pc and my bookmarks are there but my pws and logins were not imported. I figured I would just reset up a master and start over but no matter what I do the logins and passwords do not show up in the list.

What Firefox version is used on the other PC?
Did you use an extension like FEBE or did you manually copy files?
Firefox 32 and later builds store the passwords in the logins.json file in the profile folder and no longer use the signons.sqlite file that has been used before (the matching key3.db file is still needed).
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
The "Remember Password" extension has been reported to cause issues with the passwords disappearing, so if you have this extension then remove (uninstall) it.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

FATAL [INS-41311] One or more Oracle Cluster Registry (OCR) locations spec

I'm installing 11.2.0.3 Grid Infrastructure on Red Hat 5.7. I'm receiving the following error that I pasted below. There isn't a whole lot of information regarding it. It seems that the install sees an existing CRS install, but the NFS volumes are empty. This is a fresh install. I ran cleanup, but there's nothing to remove. Any help or insight will be appreciated.
Thank you
INFO: Checking path: /u02/udev/devices/ocr1
INFO: Checking path: /u03/udev/devices/ocr2
INFO: Checking path: /u04/udev/devices/ocr3
INFO: Validating for writability
INFO: Validating for valid OCR locations
INFO: Validating OCR locations.
INFO: validating if it is an existing directory.
INFO: Validating for free space
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
SEVERE: [FATAL] [INS-41311] One or more Oracle Cluster Registry (OCR) locations specified are in an existing OCR directory.
CAUSE: One or more Oracle Cluster Registry (OCR) locations specified were in directories with existing OCR files.
ACTION: Specify locations for Oracle Cluster Registry that are not in use.
INFO: Advice is ABORT

user12006502 wrote:
These are NFS mounts off of NetApp NAS. They are volumes that don't contain anything else but an empty .snapshot subdirectory. This is my first NFS RAC implementation. We followed NetApps best practices for the NFS mount options as well as the export options on the NAS. I'm sort of lost as to what the problem could be. Ran the installer with debug and strace, but I'm still not getting any insight into the issue. Thanks for trying to help.
My first reaction to the failed CRS install is to clean it up. I ran the cleanup steps, but the installer didn't get far enough to generate any files.
I'm using the following NFS mount options:
rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,vers=3,timeo=600,noac,suidUse rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,noac,actimeo=0,vers=3,timeo=600 for Mount points for CRS voting disk and OCR
Doc id - Mount Options for Oracle files when used with NFS on NAS devices [ID 359515.1]

Decrypt the encrypted password

Hi there,
I have been scratching my head for some time to fix one issue. We are planning to change the plateform/technology and we need to bring over existing login to new system. In order to have the same password I need to decrypt the password before I send it to new system. When we stored the password, it encrypts them and stores it in database. I am using following code to decrypt it. it's not worlking . This is error I am getting.
Given final block not properly padded
Here is some more information:
Key is :javax.crypto.spec.SecretKeySpec@18f3a
Format is :RAW
getAlgorithm() is :DES
String encrypted = abcdefgh
Provider is: com.sun.crypto.provider.SunJCE()
This is my code to decrypt which throws error " Given final block not properly padded" :
public String decrypt(String encrypted){
 Cipher ci = null;
 byte [] result = null;
 try {
 ci = Cipher.getInstance("DES");
 ci.init(Cipher.DECRYPT_MODE, key);
 System.out.println("CryptoUtil()" +"before hexToByteArray. Byte Data: "+encrypted);
 byte [] encryptedData = hexToByteArray(encrypted, false);
 //Log.out("CryptoUtil()" +"after hexToByteArray. lenth: "+ encryptedData.length);
 result = ci.doFinal(encryptedData);
 catch (Exception e) {
 System.out.println("CryptoUtil()" +"ERROR: "+ e.getMessage());
 return encrypted;
 String strResult = new String(result);
 return strResult;
Please help.
Thank you.

These are the two values I am getting for encrypted password:
97654de7857cd9aab331995cba044fc6
a125a6b2a71e23adc002ac7fbe1a1042
Is this a hex code?
I think the key is: abcdefgh
This is my code to encrypt and decrypt:
 * empty constructor
 * @param keydata
 public CryptoUtil(String keydata){
 if (keydata.trim().equals("")){
 logDebug("CryptoUtil()" +" Constructor didn't get a valid key!");
 usage();
 System.exit(0);
 }else{
 keyBytes = keydata.getBytes();
 key = new SecretKeySpec(keyBytes, 0, keyBytes.length, "DES");
 try {
 Provider sp = new com.sun.crypto.provider.SunJCE();
 //logDebug("CryptoUtil() " + sp.getInfo());
 Security.addProvider(sp);
 }catch (Exception ex) {
 logDebug("CryptoUtil() " +"Problem loading crypto provider \n error:"+ex.getMessage());
 usage();
 System.exit(0);
 * Encrypt
 * @param s
 public String encrypt(String s){
 Cipher ci = null;
 byte [] result = null;
 try {
 ci = Cipher.getInstance("DES");
 ci.init(Cipher.ENCRYPT_MODE, key);
 result = ci.doFinal(s.getBytes());
 }catch (Exception e) {
 logDebug("CryptoUtil()" +"ERROR: "+ e.getMessage());
 String strResult = byteArrayToHex(result);
 return strResult;
 * decrypt a card number
 * @param encrypted
 public String decrypt(String encrypted){
 Cipher ci = null;
 byte [] result = null;
 try {
 ci = Cipher.getInstance("DES");
 ci.init(Cipher.DECRYPT_MODE, key);
 //Log.out("CryptoUtil()" +"before hexToByteArray. Byte Data: "+encrypted);
 byte [] encryptedData = hexToByteArray(encrypted, false);
 //Log.out("CryptoUtil()" +"after hexToByteArray. lenth: "+ encryptedData.length);
 result = ci.doFinal(encryptedData);
 catch (Exception e) {
 logError("CryptoUtil()" +"ERROR: "+ e.getMessage());
 return encrypted;
 String strResult = new String(result);
 return strResult;
 static final String hexDigitChars = "0123456789abcdef";
 * @param a
 public static final String byteArrayToHex(byte [] a) {
 int hn, ln, cx;
 StringBuffer buf = new StringBuffer(a.length * 2);
 for(cx = 0; cx < a.length; cx++) {
 hn = ((int)(a[cx]) & 0x00ff) / 16;
 ln = ((int)(a[cx]) & 0x000f);
 buf.append(hexDigitChars.charAt(hn));
 buf.append(hexDigitChars.charAt(ln));
 buf.append(' ');
 return buf.toString();
 * @param str
 * @param rev
 public static final byte [] hexToByteArray(String str, boolean rev) {
 StringBuffer acc = new StringBuffer(str.length() + 1);
 int cx, rp, ff, val;
 char [] s = new char[str.length()];
 str.toLowerCase().getChars(0, str.length(), s, 0);
 for(cx = str.length() - 1, ff = 0; cx >= 0; cx--) {
 if (hexDigitChars.indexOf(s[cx]) >= 0) {
 acc.append(s[cx]);
 ff++;
 }else {
 if ((ff % 2) > 0) acc.append('0');
 ff = 0;
 if ((ff % 2) > 0) acc.append('0');
 byte [] ret = new byte[acc.length() / 2];
 for(cx = 0, rp = ret.length - 1; cx < acc.length(); cx++, rp--) {
 val = hexDigitChars.indexOf(acc.charAt(cx));
 cx++;
 val += 16 * hexDigitChars.indexOf(acc.charAt(cx));
 ret[rp] = (byte)val;
 if (rev) {
 byte tmp;
 int fx, bx;
 for(fx = 0, bx = ret.length - 1; fx < (ret.length / 2); fx++, bx--) {
 tmp = ret[bx];
 ret[bx] = ret[fx];
 ret[fx] = tmp;
 return ret;
Will that give you any more information to help me?

I just upgraded to Lion. I was trying to set up the iCloud and it asked for my "login" keychain password. I've never been asked for that before. I've tried every password I can think of and nothing works. Is there a way to reset the keychain password?

I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???

Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

I have recently changed my admin password on my mac and now I cant remember it, to re change it in admin I need the old password, what can I do ?

Have forgotten administrators password, what can I do?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

How do I change the admin password on my MacBook pro

I have forgotten my password and I don't want to wipe my hard drive how do I change the password?
I have done the following:
Rebooted selected a language, it then went right back to the installer but there was no change password as an option.
Under disk utility it was not high lighted.

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Why can't I log in immediately after resetting my password? (using the new password)

Hi,
I can't find the proper forum for this so I'm posting it here.
It is a problem with logging in to this very support board.
It's not your basic "I lost my password" problem.
I have an Apple ID. I try to log in and it says "wrong username or password" (even though the same username-password combination will log me in to iTunes).
So I go through the process of restting my password, aswering security questions, which I do successfully and I reset my password. Then I go to log-in to the support boards, with my new just-changed password, and it comes up with the same response "wrong username or password".
Over and over again. So in order to even seek any assistance, I need to make a whole new profile just to ask the question on this support board.
I thought that apple ids and their passwords worked across all apple programs. As I said, the Apple ID/password combination that I use for iTunes will be rejected on the support boards, and even the ID/password combination that I've just reset will not allow me access to the support boards.
Any help please?
Thanks,
Phelps

You may be accessing a cached Apple Support Communites page.
Assuming your are using Safari to access ASC ...
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click Details
Type Apple in the search field top right corner of that window. When you see the results, click Remove All.
Now empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit then relaunch Safari then try signing here > Your Homepage : Apple Support Communities

TS1544 I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get

I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...

First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

My hp mini 1000 asks me for the current password

Hi I'm having a problem with my laptop it is blocked and asks me for the current password after attempting for three times it says "password check failed
fatal error... System halted
CNU9321ZHJ

Hi,
Try entering: e9lof730zw ( Note that the 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I enter username and password to login into a website, use the site and then logoff. When I open the site again the username & password are alread filled in,

The only way to prevent to from happening that I've found so far is to close Firefox. When I open back up, go to the site the username and password are empty. This hasn't happened with previous versions of Firefox.

You can set the Boolean pref signon.autofillForms to false on the about:config page.
*http://kb.mozillazine.org/signon.autofillForms
*http://kb.mozillazine.org/about:config
This can also be caused by cookies that weren't removed properly when you logged off.

Can you add an Add Password to the Saved Password window?

There are some sites that do not prompt Firefox to save my password.
Is it impossible to add an Add Password to the saved passwords screen for times when I revisit the site?

Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
*https://support.mozilla.org/kb/Private+Browsing
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use private browsing mode"
The website might be using autocomplete=off to prevent Firefox from saving form data like name and password.
*You can toggle the signon.overrideAutocomplete pref to true on the about:config page.
*You can remove autocomplete=off with a bookmarklet to make Firefox store form data like names and passwords.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
Note that Firefox won't auto-fill saved form data automatically when autocomplete=off is used, so double-click the empty name field to get a drop-down list.
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

[FATAL] [INS-30001] The ASMSNMP password is empty.

Similar Messages

Maybe you are looking for