"Fatal Installation error" when invoking "File Info"

When I invoke "File Info" from Bridge or Photoshop, I get the following error. I reinstalled PShop twice, once even as root, and the problem remains. I've tried CS3 as well and bridge just crashes (log file attached). It also happens with a newly created user account. N

I reinstalled PShop twice, once even as root, and the problem remains.
With 'even in root' you mean you did not so before?
Ideally all applications should be installed in the default applications
folder on root level, every user account has access to them in this way.
It seems to me you have made a bit of a mess of the installation procedure
(don't want to make you angry BTW).
The best way in my opinion would be to back up all your custom settings like
actions, workspaces, tools, brushes etc. And after this go to the PS help
menu and choose deactivate, if necessary repeat this for all the Adobe suite
versions you have on your system (assuming you have all the serial numbers
also backed up in a safe place).
Visit also the clean tool page for CS5 and download the tool after having
read the instructions.
http://www.adobe.com/support/contact/cs5clean.html
Then use the uninstaller from one of the suite applications that can be
found in the application folder where you installed it. Also repeat this for
every suite version.
Use the clean tool to remove everything of CS versions from your system.
Then do system maintenance using the Apple disk Utility and choose check
and repair permissions. (also check your disk)
Also check if you have the latest OS software with using Apple Software
update
Now reinstall your main suite version again on root level and use the Adobe
auto update to gain all the latest updates.
You can have multiple version of most suite applications on your system and
even active together but you can only use Bridge version at the time. Bridge
has been improved significant for each new version of CS so use the latest.
Try again.

Similar Messages

Error when building File Info Panel

I'm trying to rebuild my custom XMP File Info panel so that it will work in CS5, but am getting the following error:
Description     Resource     Path     Location     Type
1046: Type was not found or was not a compile-time constant: XMPComboBox.     DKimageXMP.as     /dkphoto/as     line 223     Flex Problem
The line causing the problem is:
private function updateComboBox(comboBox:XMPComboBox, xmpPath:String): void
     //blah blah blah
Near the top of my actionscript file I have
import com.adobe.xmp.*;
So I don't understand why XMPComboBox is not a valid type?
Dave

Hi Stefan
Thanks for your help, that fixed the problem.
I'm now having trouble with a TextInputMRU - when I give it a dataProvider the panel builds okay, but appears empty when viewing it in Photoshop.
My panel code looks like this:
<?xml version="1.0" encoding="utf-8"?>
<fi:XMPForm
          xmlns:mx="http://www.adobe.com/2006/mxml"
          xmlns:fi="com.adobe.xmp.components.*" width="100%" height="100%"
          label="dkphoto" >
     <mx:Script>
          [Bindable]
          private var CountryList:Array = new Array("Afghanistan",
               "Åland Islands",
               "Albania",
               "Zimbabwe");
     </mx:Script>
     <fi:XMPNamespaces>
          <fi:XMPNamespace prefix="Iptc4xmpExt" value="http://iptc.org/std/Iptc4xmpExt/2008-02-29/" />
     </fi:XMPNamespaces>
     <fi:XMPFormItem label="$$$/xmp/Iptc4xmpExt/CountryName=Country Name" labelTooltip="$$$/xmp/Iptc4xmpExt/CountryName_tooltip=The name of a country of a location. This element is at the second level of a top-down geographical hierarchy." >
          <fi:XMPTextInputMRU id="LocationCreatedCountryName1" xmpPath="Iptc4xmpExt:LocationCreated[1]/Iptc4xmpExt:CountryName" width="300" dataProvider="{CountryList}" />
     </fi:XMPFormItem>
</fi:XMPForm>
Any idea what the problem would be there?
Thanks
Dave

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Installation error when installing CS6 on Mac?

I keep getting an installation error when I try to install CS6 on my Macbook Pro. It says "installer failed to initialize, this could be due to a missing file". It also shows troubleshooting tips. I have tried them and none of them work. I also tried disc repair and multiple other troubleshooting advice from this site. Nothing has worked yet. Help!

does your macbook meet the system requirements:
Mac OS
Multicore Intel processor with 64-bit support.
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems. Refer to the CS6 FAQ for more information about Mac OS X Mountain Lion support.**
4GB of RAM (8GB recommended)
15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required and second professionally calibrated viewing display recommended for Adobe SpeedGrade
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java Runtime Environment 1.6
Eclipse 3.7 Cocoa version (for plug-in installation of Adobe Flash Builder; the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
Dedicated GPU card recommended (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
if so, attach a screenshot of the error.

Itunes 9.2.1.5 "Error when writing file C:\program files\apple software....

Got an error message when installing itues 9.2.1.5 "Error when writing file C:\program files\apple software update\softwareupdate.exe you do not have admin right to read/write the menu." "寫入檔案時發生錯誤 C:\program files\apple software update\softwareupdate.exe 你沒有權限存取目錄"
There is no "apple software update" folder in my C:\program files\
I tried to uninstalled all apple related software, restart the computer and reinstall the itunes, I still get this error message.
It appears that the installation of quicktime was successful.

After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files"

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files". I use a PC and have made the purchase of that service. What's the problem?

Hi ampsanru,
We would need some information regarding the error, could you please post a screenshot moreover your system information i.e. OS, RAM & Graphics card.
-Ankit

Epson scanner error message: missing file info.plist

I've been wrestling with an epson scanner/printer I got free with my mbp a year ago. The printer worked fine, but every time I tried installing the scanner drivers, I was foiled by the error message "missing file: info.plist..." I was reduced to scanning on my sloooow dell desktop at work. After a few rounds with epson support, they suggested I install the drivers on a different user account on my computer. Problem solved! It works, even on the original user account.

I've been wrestling with an epson scanner/printer I got free with my mbp a year ago. The printer worked fine, but every time I tried installing the scanner drivers, I was foiled by the error message "missing file: info.plist..." I was reduced to scanning on my sloooow dell desktop at work. After a few rounds with epson support, they suggested I install the drivers on a different user account on my computer. Problem solved! It works, even on the original user account.

Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Sims 3 - Fatal Installation Error

My Macbook is about 2 weeks old now, and I tried to install Sims 3 the other day and I got a response upon installation saying that there was a fatal installation error, I was wondering if anyone else has had this problem, and if/how they have resolved it?
Thanks!

Hi @JLMD
What brand of computer do you have? I don't want to make any suggestions until I know if this is an HP computer or another Brand. I look forward to hearing from you, and working with you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Alchemy installation error when running alchemy-setup file

I went through all the setup steps to install Adobe Alchemy but when my .bashrc file ran alchemy-setup I got errors. I tried to keep going through the steps, but I got more errors when I got to the compile step.
Here's the error I got when it ran alchemy-setup
bash: $'\r': command not found
':not a valid identifier
':not a valid identifier
':not a valid identifier
':not a valid identifier
bash: $'\r': command not found
bash: $'\r': command not found
bash: $'\r': command not found
bash: $'\r': command not found
bash: $'\r': command not found
bash: $'\r': command not found
Here's the uncommented portions of my alchemy-setup file
export ALCHEMY_HOME=/cygdrive/c/alchemy
export ALCHEMY_VER=0.4a
export PATH=$ALCHEMY_HOME/bin:$PATH
export ASC=$(cygpath -m -s -p $ALCHEMY_HOME/bin/asc.jar)
export SWFBRIDGE=$ALCHEMY_HOME/bin/swfbridge.exe
export ADL=/cygdrive/c/flex/bin/adl.exe
I have flex sdk 4.5.1 in my c:/flex directory and alchemy in my c:\alchemy directory
when I tried compiling a file I got errors saying gcc: unrecognized option '-03'
when I type which gcc command I get the return /usr/bin/gcc which I'm guessing is the default gcc and not the correct one for alchemy, but I'm not well versed in Cygwin and could figure out how to change the settings to use the alchemy gcc
Any feedback on how to eliminate these errors would be greatly appreciated.
Thanks,
Daniel

Hi Daniel,
Just use text editor supporting Unix-style line endings. (only \n). Windows notepad and similar tools use 2 symbols - \r\n for line ending.
I'm using Crimson Editor, for example.

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

"Fatal Installation error" when invoking "File Info"

Similar Messages

Maybe you are looking for