Fatal Slapd Missing configuration file during ds5.2 install

I am still trying to install ds 5.2 on Solaris 8. idsktune reports no errors.
During install I get the following error message:
Your new directory server has been started.
Created new Directory Server
Start Slapd Starting Slapd server configuration.
Fatal Slapd Missing configuration file /exports/iplanet/setup/slapd/slapd.inf
Configuration of the Directory Server failed.
Error Directory Server configuration failure
although, the file /exports/iplanet/setup/slapd/slapd.inf is there!!!
any help? Thanks

Same problem. I ended up going to 9. Let me know if you figure it out. I even put a support call in w/ no luck.
Solaris 8 s28_38shwp2 SPARC

Similar Messages

Failed to read the configuration file. Fresh install on windows 7

I have just downloaded and installed firefox on my windows 7 computer. No errors on the install. When I try to launch Firefox I get this dialog box. Configuration Error - Failed to read the configuration file. Please contact your system
administrator.

Check for the presence of a mozilla.cfg file in the Firefox program folder to initialize some prefs.
This also involves the presence of a .js (JScript) file, probably in "defaults\pref" folder, that specifies to process this mozilla.cfg file.
If you have .js files apart from the channel-prefs.js file, that sets app.update.channel, in the defaults\pref folder then open this file in an editor like Notepad and please post its content.
Also please post the content of the mozilla.cfg file.
There shouldn't be a mozilla.fcg file present unless you've created it yourself to initialize some prefs.
If you have this mozilla.cfg file then best is to do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Preferences_not_saved#Other_solutions

Missing make files during install

During install on Slackware Linux
recievd error message that it could not
find ins_oemagent.mk and ins_odg.mk

Never mind. I misinterpreted the process. I was thinking there were multiple source rpms.
There is only one src file currently and you just compile that:
rpmbuild --rebuild /rpmbuild/SRPMS/R-3.0.1-2.el6.src.rpm
that creates a number of RPMS. But you only install one of those:
such as:
rpm -i /root/rpmbuild/RPMS/x86_64/R-core-3.0.1-2.el6.x86_64.rpm

Missing PSEMHUB files in Windows install

Hi -
I'm installing PeopleTools 8.52.09 on a Windows 2007 server, that has had several PS installs before, which may or may not have been successfully cleaned up. This is to support a PS 9.1 installation. At any rate, I have PeopleTools installed BUT when I go into my $PS_HOME directory, I am missing files. Specifically PSEMHUB files - all the folders are empty and the PsCA doesn't exist. I tried reinstalling PT 8.52 and PT patch in another directory to get the files but they don't exist there either.
I need to get Change Assistant up and running asap.
Any advice appreciated.

The issue may because your system OS is not supported.
For PeopleTools8.52, certified windows OS : Client OS : Vista/7/8 server OS : Windows 2008/2008R2/2012
Please check the certifications from Oracle support site.

Itunes missing required files - even after installing quick time 7

PLEASE help- i have been having so much trouble with itunes lately.
first of all, i can't open itunes because " some of its required files are missing."
so, i reinstall itines with newest version of quick time 7.
when setting up itunes after this installation, a pop up box tells me that "Quick Time installation failed. Error Code: -3"
so, i go to click on itunes 'just to check' and the same "missing files' message appears yet AGAIN.
someone please tlel me what do to next.
i'd greatly appreciate your help!

Hi there,
I have exactly this problem, and I have tried to reinstall the standalong QT, it still does not work. But nevertheless, try this:
http://www.apple.com/quicktime/download/standalone.html
cheers,
Ipodrc

O2cb_ctl : unable to load cluster configuration file while RAC setup.

OCFS2: unable to load cluster configuration file
Hi,
I installed OCFS2 successfully.
I successfully install 3 RPMs.
I am getting error while running ocfs2console to do cluster configuration.
I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
this commnd. but getting error as
"o2cb_ctl: Unable to access cluster service while creating node Could not add node "
Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
# /etc/init.d/o2cb offline ocfs2
# /etc/init.d/o2cb unload
# /etc/init.d/o2cb configure
Configuring the O2CB driver.
Next, I configure /etc/ocfs2/cluster.conf:
cluster:
node_count = 2
name = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 1
name = ocvmrh2053
cluster = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 2
name = ocvmrh2051
cluster = oracle
Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
Starting cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
Stopping cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
Thanks.
Please anyone can help me to resolve this.
Message was edited by:
user596035

provide output of this command from all OCFS2 nodes:
ls -l /etc/ocfs2/cluster.conf
Regards,
Martin

Sapgui 720 Path of Local configuration files location

Does anyone know how to set the "Path Local Configuration Files" during the installation of the sapgui? Either variable name of registry setting?
Thanks,
Daniel

Please have a look at notes 1409494 and 1426178.
The Path Local Configuration Files (except saplogon.ini and sapshortcut.ini) cannot be changed, because they are used by other applications than the SAP GUI, too.
Regards,
Jann

How to enforce a different configuration file while invoking SAPShcut.exe

I'm using sapshcut.exe to logon to SAP. Following is syntax of command that Iu2019m using for that prupose:
sapshcut.exe /sysname=IDES /client=800 /user=xxxx /pwd=yyyy
By default, the configuration file (saplogon.ini) that is being used during this process by sapshcut.exe is located in user directory (SAP GUI 7.2). However, Iu2019d like to use a different configuration file that is located at other location (e.g., h:/test/saplogon.ini). SAP has mentioned to use additional parameter "INI_FILE" for that purposes so Iu2019m using following command:
sapshcut.exe /sysname=IDES /client=800 /user=xxxx /pwd=yyyy /INI_FILE=h:/test/saplogon.ini
No matter what value I defined for the u2018INI_FILEu2019 parameter, SAP ignores it and always uses default configuration file located in the user directory and if given SAP system does not exist in that configuration file then I report an error. Interestingly, I found that if use 'saplogon.exe' instead of 'sapshcut.exe' and provide same parameter value for 'INI_FILE' parameter then SAP overwrite the default configuration file and uses saplogon.ini defined there. But i cannot use saplogon.exe as I must have to use sapchcut.exe to directly log into SAP system for automation testing.
I've also found out that the only way sapshcut.exe can overwrite the default ini file is through the use of environment variable "SAPLOGON_INI_FILE". But rather than using environment variable I'd like to define configuration file during the command line.
Any help would be really appreciated.

We stumbled upon the same problem. Thank you for mentioning that using the environment variable works.
This leads to the following single command line as a workaround.
First set the needed saplogon.ini and then execute in a nested command shell the call to sapshcut.exe
cmd /c set SAPLOGON_INI_FILE=C:\config\saplogon.ini & cmd /c "%ProgramFiles%\SAP\FrontEnd\SAPgui\sapshcut.exe" -user= -pw= -language=E -system=XXX -client=100
This works, but only if there is not already an instance of saplogon.exe running with a different saplogon.ini.
Best regards,
Axel.

BP &C upgrade to version 7 failing, server configuration file missing.

Anyone,
When I run the version 7 Startup.exe, the only options are to Prepare or Other. I think the server configuration file is missing. Is there a way to create/recreate one without using the insight export feature (that appset is not installed or enabled).
Thanks in advance.

Your flame is not at all helpful. After digging into the problem for a couple hours I was able to discover EXACTLY what had happened.
Thank you
For everyone else, here is what the upgrade has done:
Under the "iTunes\iTunes Music" folder there used to be a "Downloads" folder that was deleted by the 7.0 upgrade.
It looks like this folder was used for the recovery of failed downloads, but the previous versions of iTunes were not managing this folder very well. There were several folders containing just 1 media file. Most of the media files were 0 bytes long, except for the 2 files that I had lost during the upgrade. Apparently, iTunes was using these 2 files. The upgrade to version 7.0 caused this folder to be deleted; thus the links were broken. Anyone else who had a failed download, in particular a video download, may have the same issue.

ERROR INSTALLING OC4J CONFIGURATION FILES

Hi,
Steps:
1. Downloaded Oracle11g Rel2 from download.oracle
2.Installed Software only option and completed installation on my laptop Windows7 ultimate. Selected Enterprise Version, unchecked OLAP,DATA MINING.
Error message during installation, some files missing .jar files. I have opted to ignore and continue and finally got success installation message.
3.Configured DB using DBCA.
4.Able to connect as SYS, SYSTEM.
Problem.
I tried to reconfigure DB using DBCA for OEM, received the msg
ERROR INSTALLING OC4J CONFIGURATION FILES. The summary error log is here. Appreciate any help.
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMConfig perform
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
thanks
Ram

Hi,
Seems you have not extracted downloaded zip files into same directory. In that case you get error like
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup12.jar (A file or directory in the path name does not exist.)
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup5.jar (A file or directory in the path name does not exist.)
Also after installation dbca will throw error.
Try the below
For AIX platform:
unzip in the same folder
$ mkdir 1120
$ mv aix.ppc64_11g_database_1of2.zip 1120
$ mv aix.ppc64_11g_database_2of2.zip 1120
$ cd 1120
$ unzip aix.ppc64_11g_database_1of2.zip
$ unzip aix.ppc64_11g_database_2of2.zip
$ cd database
$ ./runInstaller
This is true for all platforms on which you get two .zip files to download
For Windows 64 bit example on 11.2.0.1 you can do the following :
- create a directory C:\tmp\1120
- copy winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zip under C:\tmp\1120
- unzip winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zipunder C:\tmp\1120
Thanks,
Krishna

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Bad or missing storyboard configuration file ( studio.ini)

hi
i have installed EP 6.0 SP09 sneak preview
i would be interested in starting the VC applications
i have already installed Adobe SVG viewer and Microsoft XML Praser
but till i m getting en error "bad or missing storyboard configuration file ( studio.ini)"
how should i resolve this error
Regards
JM

Hello all Experts,
We can use all the version of IE(Internet Explorer),
I got the solution of this particular error, so please follow the this steps:-
Install the "IE6SP2" in your system Registry..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/ie70
After that you can use the any version of IE(Internet Explorer).
and also please check the version of these softwares:
SVGView
MSXML Parser 4.0
This will help you Definately.
Thankyou
Regards
Kshitij D.

Error during accessing VC - Storyboard configuration file

Hi.
When I try to use VC on my desktop (winXP sp2 - Internet Explorer browser v.6.0.2900.2180 sp2) show me a popup with the following message:
"bad or missing storyboard configuration file ( studio.ini)"
If I try to use Firefox (latest release) I have only a black page.
Please help me.
Thanks.
Alex

Hi Alex,
Keep using IE and as Prachi Bijlani said try to download Adobe SVG Viewer from
http://www.adobe.com/svg/viewer/install/
Regards,
Gilson

VC: bad or missing storyboard configuration file ( studio.ini)

Hi Experts
When I try to use VC on my desktop (winXP sp2 - Internet Explorer browser v.6.0.2900.2180 sp2) show me a popup with the following message: "bad or missing storyboard configuration file ( studio.ini)"
i have SVG 3.0 & MSXML 4.0 and MSXML 6.0 files on my client machine....what could be the issue??

Hello all Experts,
We can use all the version of IE(Internet Explorer),
I got the solution of this particular error, so please follow the this steps:-
Install the "IE6SP2" in your system Registry..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/ie70
After that you can use the any version of IE(Internet Explorer).
and also please check the version of these softwares:
SVGView
MSXML Parser 4.0
This will help you Definately.
Thankyou
Regards
Kshitij D.

I keep on getting the message "missing .dll file" when I try to install Itunes on Windows 7 what is wrong ?

I am using Windows 7 (64) and keep on getting the message of "missing .dll files" after I attempt to install the latest version of ITunes. I attempted to install an earlier version and had the same results. I have uninstalled and reinstalled ITunes to no avail. I have queried this message on Google and found little to go by.
Can anyone help from here ?

This has just happened to me - again. Can't think what caused it. I uninstalled Quicktime a little while ago, maybe connected? I don't know. Uninstalling iTunes, or repairing, or a fresh iTunes install does not help
Even if you keep downloading and putting the dll files it keeps asking for in the sysWOW64 and/or System 32 folder, Apple Mobile Device Support will not not 'start' from Services.
Anyway, as well as itunes, you need to also un-install Apple Software Update, Apple Mobile Device Support, and Bonjour, then reinstall the latest iTunes to get it all working again

Fatal Slapd Missing configuration file during ds5.2 install

Similar Messages

Maybe you are looking for