Fatal, unrecoverable error in FM and RH after spell-checking
I have TCS 2.5. Last month, a few hours before our product release, I was spell-checking my RoboHelp HTML 8 project and had FrameMaker 9 open at the same time. Suddenly, Frame crashed with the dreaded internal error message, and I could not get it to start again. Soon after, RH also crashed and I couldn't get it to run again, either. Fighting back panic as I tried uninstalling and reinstalling to no avail, I finally installed trial versions of Frame 10 and RH 9, and I was able to at least get my docs out for the release. But it wasn't until today that I finally figured out what was causing the problem. I noticed that the programs were crashing after loading the fonts and right when it got to the localization part, so I figured it had something to do with my dictionaries, but I couldn't find any files in my TCS folder that been updated that day. Finally, I found files here: C:\Users\myUserName\AppData\Roaming\Adobe\Linguistics\Dictionaries. I found an "added.clam" file that was last updated right before the crash. I deleted all the directories in the Dictionaries directory, and now Frame and RH are working again.
Hopefully this will save someone the stress I endured, as I couldn't find anything about this on the forums at the time, and it was only by chance that I finally found these folders.
Solved
Similar Messages
-
After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.
... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Sending e mails after Spell Check
My e mails do not send after spell check is complete. The e mail goes through spell check and when I am done and close the spell check window it doesn't automatically send. I then have to click the send button again. Any suggestions?
It is working as I wanted now. In Mail I did the following: Mail>Preferences>Composing, then in the top dialogue box Composing I chose Check Spelling> When I click Send. Not a very complicated solution but it works for me. When I finish an e mail and click send it now goes through the spell check and then automatically sends once I finish the spell check. I hope that is what you were asking.
B -
I have slight Dyslexia and find the spell check on all mac products far inferior to microsoft, any advice on any way to improve spell check. I have an Iphone, Ipad and mac bookpro and I find the spell check terrible, I miss typed grammar and wrote grammer, my mac said it had no spelling suggestions, both google and micro soft word corrected the spelling but not my Mac book pro. Any surgestions?
Not very many Outlook users here. You'll to better asking in Microsoft's Office:Mac forums here:
Office for Mac forums -
ERROR CODE 50 AND 54 AFTER UPDATING TO IOS 5
I updated my iPhone 4 to ios5 and when it was restoring iTunes said the restore was interrupted and error code 50 and 54. I lost current photos and some apps although iTunes had reported that my phone was backed up. Has anyone else received these errors and how can I fix it?
Not sure why, but have you taken the troubleshooting steps recommended in the User Guide (restart, reset, restore)?
-
halfway through downloading an album from the Itunes store, i've got the error message 8003. This talks about checking my connection (which is fine and always has been). It downloaded fine onto my Iphone and Ipad. I trawled through the support pages and they just suggested you needed the latest version of Itunes on my system (11.1.5) which I've got. Any ideas?
You've tried the troubleshooting for that error on the TS3297 page that you posted from ?
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory. -
How to add support both English and Portuguese in spell checking?
In my research work, I often have to write documents both in English and Portuguese. How should I add support for both languages in spell checking? I'd want to switch between both when writing my stuff and, for now, all I have available on Pages is my Mac OS X Lion's native language: English. How to add support for both languages in Pages?
You can use Styles. The default language in your Pages Styles is set to the computer language which you said is english, right.
If you want Portuguese for some body text select some text >
in the Inspector palette > T tab > More > language > select Portuguese >
now click on the style Body text triangle > choose Create new paragraph style from selection > name it so you know it has this language.
When writing you have to tell Pages which paragraph to be in Portuguese and which in English. -
Replication Error between DC and PDC after a reboot.
Hi,
We have a very small server environment and having one DC and one ADC. Last week ADC got a sudden restart. After booting it shown one service failed error. Since then the ADC is not replicating with DC. Giving below the diagnosis
results of Dcdiag and FSMO check.
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC
Starting test: Connectivity
......................... DC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : bannaridc
Running enterprise tests on : bannaridc.com
Starting test: DNS
......................... bannaridc.com passed test DNS
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine backupdc, is a DC.
* Connecting to directory service on server backupdc.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BACKUPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Replications
* Replications Check
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=ForestDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:27.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=DomainDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:33:40.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Schema,CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:42.
The last success occurred at 2014-05-12 09:42:25.
95 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
* Replication Latency Check
REPLICATION-RECEIVED LATENCY WARNING
BACKUPDC: Current time is 2014-05-15 13:24:11.
DC=ForestDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:27.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:33:40.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:42:25.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BACKUPDC passed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BACKUPDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=bannaridc,DC=com
(Configuration,Version 2)
* Security Permissions Check for
DC=bannaridc,DC=com
(Domain,Version 2)
......................... BACKUPDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BACKUPDC\netlogon
Verified share \\BACKUPDC\sysvol
......................... BACKUPDC passed test NetLogons
Starting test: Advertising
The DC BACKUPDC is advertising itself as a DC and having a DS.
The DC BACKUPDC is advertising as an LDAP server
The DC BACKUPDC is advertising as having a writeable directory
The DC BACKUPDC is advertising as a Key Distribution Center
Warning: BACKUPDC is not advertising as a time server.
......................... BACKUPDC failed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
......................... BACKUPDC passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 3107 to 1073741823
* DC.bannaridc.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2607 to 3106
* rIDPreviousAllocationPool is 2607 to 3106
* rIDNextRID: 2771
......................... BACKUPDC passed test RidManager
Starting test: MachineAccount
Checking machine account for DC BACKUPDC on DC BACKUPDC.
* SPN found :LDAP/backupdc.bannaridc.com/bannaridc.com
* SPN found :LDAP/backupdc.bannaridc.com
* SPN found :LDAP/BACKUPDC
* SPN found :LDAP/backupdc.bannaridc.com/BANNARIDC
* SPN found :LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/bcbf105f-e755-4c24-b846-01d447834480/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com
* SPN found :HOST/BACKUPDC
* SPN found :HOST/backupdc.bannaridc.com/BANNARIDC
* SPN found :GC/backupdc.bannaridc.com/bannaridc.com
......................... BACKUPDC passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BACKUPDC passed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
BACKUPDC is in domain DC=bannaridc,DC=com
Checking for CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com in domain DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com in domain CN=Configuration,DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
......................... BACKUPDC passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BACKUPDC passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BACKUPDC passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BACKUPDC passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:30:20
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:49:04
(Event String could not be retrieved)
An Error Event occured. EventID: 0x40000004
Time Generated: 05/15/2014 12:53:20
Event String: The kerberos client received a
KRB_AP_ERR_MODIFIED error from the server
host/backupdc.bannaridc.com. The target name
used was
LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com.
This indicates that the password used to encrypt
the kerberos service ticket is different than
that on the target server. Commonly, this is due
to identically named machine accounts in the
target realm (BANNARIDC.COM), and the client
realm. Please contact your system
administrator.
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 13:12:19
(Event String could not be retrieved)
......................... BACKUPDC failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com and backlink on
CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on
CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
......................... BACKUPDC passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : bannaridc
Starting test: CrossRefValidation
......................... bannaridc passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... bannaridc passed test CheckSDRefDom
Running enterprise tests on : bannaridc.com
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... bannaridc.com passed test Intersite
Starting test: FsmoCheck
GC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
PDC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
KDC Name: \\backupdc.bannaridc.com
Locator Flags: 0xe00001b8
......................... bannaridc.com passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS
Please help me to resolve this issue.
Regards,
surenHi suren,
Error 1256 is logged as the replication status per partition as a result of the destination DC cancelling the sync request from the source DC due to a connectivity failure previously encountered.
Please refer to the articles below to troubleshoot the issue:
Troubleshooting AD Replication error 1256: The remote system is not available.
http://support.microsoft.com/kb/2200187
Troubleshooting AD Replication error 5: Access is denied
http://support.microsoft.com/kb/2002013
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi all;
Suppose I have created a two-node Hyper-V cluster with a fibre channel shared storage in Windows Server 2012. Everything work fine except some issues. One of the is that when I want to configure the cluster to add a VM as its cluster resource, the following
error message appears:
An error occurred while determining the state of this clustered role in the cluster. The remote procedure call failed with error 800706BE.
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.Thanks for your reply…
I have tested many possible solutions without any success. The actions that I have done so far are mentioned in the following and the results of them have been said, too.
When I restart the servers, everything are good but after some times when I reopen Failover Cluster Manager on one of the servers, the snap-in related to my cluster name does not load. Please look at the following figure:
And when I want to connect to my cluster name, the following error message appears:
Note: The above problem appears randomly regarding to servers. In the other hand, after the restart, one of the servers acts as the above statement.
The following error message is the result of the DTCPing utility:
++++++++++++hosts
++++++++++++
06-11, 10:02:15.346-->Error(0x424) at clutil.cpp @256
06-11, 10:02:15.346-->-->OpenCluster
06-11, 10:02:15.356-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:02:20.428-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:02:32.448-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
06-11, 10:26:10.837-->Error(0x424) at clutil.cpp @256
06-11, 10:26:10.837-->-->OpenCluster
06-11, 10:26:10.837-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:26:14.947-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:26:26.967-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
++++++++++++hosts
++++++++++++
06-11, 10:47:51.510-->Error(0x424) at clutil.cpp @256
06-11, 10:47:51.510-->-->OpenCluster
06-11, 10:47:51.510-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:47:55.020-->Start DTC connection test
Name Resolution:
SRV03-->172.16.140.10-->SRV03
06-11, 10:48:06.830-->Start RPC test (ADMINISTRATOR1-->SRV03)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
The following output is the result of running PortQuery on port 135 on both servers:
=============================================
Starting portqry.exe -n srv03 -e 135 -p TCP ...
Querying target system called:
srv03
Attempting to resolve name to IP address...
Name resolved to 172.16.140.10
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv03[49152]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv03[49159]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv03[49156]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv03[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49157]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv03[\\PIPE\\wkssvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:srv03[\\PIPE\\W32TIME_ALT]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv03[49154]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv03[49154]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv03[49154]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv03[49154]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv03[49154]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv03[49154]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv03[49154]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv03[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv03[49153]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv03[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv03[\\PIPE\\InitShutdown]
Total endpoints found: 51
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv03 -e 135 -p TCP exits with return code 0x00000000.
And
=============================================
Starting portqry.exe -n srv04 -e 135 -p TCP ...
Querying target system called:
srv04
Attempting to resolve name to IP address...
Name resolved to 172.16.140.11
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv04[1025]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv04[1065]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv04[1057]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv04[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1084]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv04[\\PIPE\\wkssvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv04[1027]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv04[1027]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv04[1027]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv04[1027]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv04[1027]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv04[1027]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv04[1027]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv04[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv04[1026]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv04[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv04[\\PIPE\\InitShutdown]
Total endpoints found: 50
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv04 -e 135 -p TCP exits with return code 0x00000000.
I have read the KB197814 and did the steps in it, restarted both servers, but the problem did not resolved.
I have check both servers for RPC Service status and in both servers it has started.
The both servers are alive and can ping each other by their IP address and name.
The firewall of both servers is off and I stopped the Windows Firewall service COMPLETELY.
Any services and applications that are depending on RPC have problems. For example when I want o remotely manages the services on these servers by using Services.msc console, the following error message appears:
Error 1726: The remote procedure call failed.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Fatal internal error: I/EX
I am developing an application, it will read out data in an olite db(5.0.2.7) using jdbc call, then it will write these data into an oracle 9i db using bc4j.
my system runs in win xp, I am using JDeveloper 9.0.3.1035.
when I run my class as a plain java application, everything is ok.
but when I call my class from a servlet as a web applicaiton, the web application terminate unexpected with an popup error message:
I/EX 311, and I can find this error in log:
Fatal internal error: I/EX
When I debug my program, I found that the error occured in rs.getString() statement :
ResultSet rs = ... ;
String s;
s = rs.getString("...");
Any one can help?
thanks.Hello ! I am working with Oracle lite :
Connected to: Oracle9i Lite ORDBMS
Database Name: POLITE (Read Write)
Database Version: 4.0.2.0.0
Auto Commit: off
Driver Name: oracle.lite.poljdbc.POLJDBCDriver (OLite 4.0)
and Jdeveloper 9i
JDK 1.3 of the Jdeveloper and W2K Professional
I was searching for an answer cause I have the same problem but I realized that the problem is not directly related with BC4J or OC4J.
I suspect that is involve with the driver olite40.jar I hope you can validate this. I can reproduce the problem and it happen when you run a program in an application Server , I tried with OC4J and Tomcat the code like Weijun Tian explain I show two examples :
1st case : Supouse that I run a query to database like that : select name, price from tableTest ;
Statement stm = con.createStatement();
ResultSet rs = stm.executeQuery(�select name, price from tableTest�);
If the column �name� doesn�t exist or is incorrect writed I expect a SQLException well , that is right if I run a simple program with main method. But if I run the same query into a servlet , I have the problem of Fatal Internal Error I/EX without any explanation. This is running in OC4J now, if I run in Tomcat the same code I obtain :
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6d442b44
Function name=JVM_DisableCompiler
Library=C:\jdk1.3.1_09\jre\bin\hotspot\jvm.dll
Current Java thread:
at oracle.lite.poljdbc.LiteEmbStatement.jniExecDirect(Native Method)
at oracle.lite.poljdbc.LiteEmbStatement.executeDirect(Unknown Source)
at oracle.lite.poljdbc.POLJDBCStatement.executeQuery(Unknown Source)
at com.next.jsptest.Product.getDetail(Producto.java:59)
at com.next.servlets.ControlServlet.doPost(ControlServlet.java:163)
�.
�.
In both of them (OC4J and Tomcat) the server is shut down after the problem.
2nd Case : Now, suppose another situation , imagine a field in the database that is null , well, after the rs.getString(�THE_FIELD�), I expected that the answer will be null ok, if I run this in a simple class with main method there is no problem but if I run the same in a servlet , well, the same problem! I/EX and server shutdown again with OC4J or Tomcat, the same problem.
I think that something like that happen with you Weijun Tian.
Well , what I think is that there is a problem with Oracle Lite to work with application servers, I don�t understand why works fine in simple programs with main method but when I run in a server the same query have these kind of errors , I really hope you can help me because I don�t want to tell that Oracle Lite doesn�t work with an application server or is not a good Database for web applications.
Thanks a lot!!!
PD . I also put here my posts to the metalink and forums.
21 / 10 / 2003
Hi there, I have the same problem but I found that there is not directed relation with the getString(),the problem is in general. Apparently the driver does not work with SQLException , for example I try to make update and I put a column that not exist I expected a SQLException but get the error Fatal internal error: I/EX and the server shut down (?).
I think that it dependes of the driver, I am using OLITE4.jar in windows 2000 and works fine but when I have a simple error (talking about JDBC) get the error I/EX and shut down the server. Could you help me with some advice around this??
21 / 10 / 2003
Also I found that when I use the driver in a simple program the SQLException is captured for the try-catch block but when the same query for example is running in the JDeveloper from a servlet using the server for test of JDeveloper the same exception produce the problem of Fatal internal error:I/EX , I tried the same code in a Tomcat server and this is what I get :
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6d442b44
Function name=JVM_DisableCompiler
Library=C:\jdk1.3.1_09\jre\bin\hotspot\jvm.dll
Current Java thread:
at oracle.lite.poljdbc.LiteEmbStatement.jniExecDirect(Native Method)
at oracle.lite.poljdbc.LiteEmbStatement.executeDirect(Unknown Source)
at oracle.lite.poljdbc.POLJDBCStatement.executeQuery(Unknown Source)
at com.next.jsptest.Producto.getDetail(Producto.java:59)
at com.next.servlets.ControlServlet.doPost(ControlServlet.java:163)
at com.next.servlets.ControlServlet.doGet(ControlServlet.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at
and my server shut down as far as I know the driver olite40.jar is a JDBC-ODBC driver I think that this is the reason for the problem maybe if I use a driver type 4 I can work better but, is there other driver for Oracle Lite in windows 32??? type 4 could be a solution. -
Constant errors from Time Machine with error code 36 and 8062
Hi chaps,
I have trawled the internet and spent a huge amount of time on this problem and can't seem to fix it.
This is the first backup on to a brand new external USB hard disk, formatted correctly.
It starts the backup fine and then stops and a random point normally before 5GB with the same error every time but on different files.
First it was failing on garageband so I excluded that, then it failed on a strange pdf that I can't find in User Templates which I excluded with no joy.
I've turned off spotlight for the external disk and tried several different formats, again with no success.
It first errors with 36 and then after 8062
Can any suggest what is going on please?Japtastic wrote:
Hi chaps,
I have trawled the internet and spent a huge amount of time on this problem and can't seem to fix it.
This is the first backup on to a brand new external USB hard disk, formatted correctly.
Are you certain? That's the most common cause of initial backups failing on a new disk (since most new disks come set up for Windoze), and has exactly your symptoms. See #C1 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum, and/or this Apple article: http://support.apple.com/kb/TS1550?viewlocale=en_US
It starts the backup fine and then stops and a random point normally before 5GB with the same error every time but on different files.
First it was failing on garageband so I excluded that, then it failed on a strange pdf that I can't find in User Templates which I excluded with no joy.
Are you getting the messages shown in #C3 of the Troubleshooting Tip?
If so, do the things in the pink box there. -
Zoom to error on spell checker
Hi all,
If zoomed in to an area in Illustrator CS5 and run the spell checker it would pan around the job showing where each spelling error instance was. This function seems to have gone in CC v17 the spell checker works but does not show where the error is. Any ideas or suggestions please?HI I have submitted your request to the amo team. Please keep track of updates there as well. However I am sorry I do not have an ETA on this request at this time.
[https://bugzilla.mozilla.org/show_bug.cgi?id=1101967]
Note: please keep in mind the etiquette before making comments on bugs [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette] -
Auto correct on my desktop Mac is making me look like an idiot. After I type it's changing words into other words I never typed and it even pushes words together that I'd typed a space in between in order to create new words that I never typed which make absolutley no sense.
Now after I type a document I have to go back and psychically spell check my entire document the old fashioned way to make sure auto-correct isn't making me look like a clown who can't spell.
Is there any way to disable "auto correct" on the desktop MAC and still keep spell check running?
The amount of messages I've sent out with horribly misspselled words or errrors as a result is maddening.
HELP!!!
Running OSX 10.9.1I had turned off auto-correct in the keyboard preferences, but in Mail all my spelling and grammer choices were grayed out. The key for me — as Kingoftypos points out — was "For Mail, open a new message/reply/forward. Then go to the Edit menu and scroll down to the Spelling/Grammar."
It would never have occurred to me to open a new message to be able to change the settings.
Thanks, King -
I can't gte spell check to work it just says
Most browsers check for spelling mistakes automatically. Look for the words that are flagged by red lines and right-click them to see suggestions. Note that with some browsers, you may need to download a dictionary.
I have done thisNot all locales come with a dictionary installed for licensing reasons.<br />
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.<br />
<br />
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.<br />
You can also try to toggle the "Check Spelling" item off and on again.<br />
<br />
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]<br />
See also http://kb.mozillazine.org/Dictionaries -
Despite my spell check being set, it does not work in Hotmail and some other websites.
I have the setting for spell check set up but it does not work on some sites like hotmail. I go to the spell check button in hotmail and it tells me that my browser will automatically check as I type but it doesn't. I've searched to override this or to get the spelling checked independently but without any luck, Any suggestions?
Not all locales come with a dictionary installed for licensing reasons.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions).
You can see which dictionary is selected if you right-click in a text area and open the ''Languages'' submenu.
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.
You can also try to toggle the "Check Spelling" item off and on again.
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]
See also http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries:
https://addons.mozilla.org/firefox/browse/type:3
https://addons.mozilla.org/en-US/firefox/addon/3366 (English (British))
Maybe you are looking for
-
My Wife and I both have an iPad (with different iCloud/Apple IDs and Accounts), however we share a Macbook Pro for iCal. My iPad syncs fine with iCal- all of the information appears and I can update information on either the iPad or iCal successfully
-
Calculation of Purchase Order TAX in Smart Form
Hi All ! I am facing problem in purchase Order, how to calculate the value of tax in Purchase order . in KONV Table, I am getting the value of condition type which r maintained on pricing procedure but, we r not getting the condition type for particu
-
Can't get sound from USB input device
I've got an Alesis iMultiMix 8 USB mixer plugged into my shiny new MacBook Pro (running Leopard). The Mac properly recognizes the USB Audio Codec as a sound input device, and in fact shows a signal being received from the mixer. However, I don't actu
-
dear expert all parameter from date to to date , project code one of my client requriment i have need project code wise aging report . send me the query.
-
Multiple vLans with Multiple Gateways
HI. Got a SF500 in layer3 mode, operating 5 vlans all with their own subnet. Vlan 10 = 192.168.10.0/24 Vlan 100 = 192.168.100.0/24 Vlan 200 = 192.168.200.0/24 Vlan 201 = 192.168.201.0/24 Vlan 202 = 192.168.202.0/24 We have a gateway on Vlan 10 (192.1