Fatality Headset HS 1000 Microphone help

I just bought a new fatality headset. I am trying to figure out how to use the microphone. Is there a way to make the microphone work? Is there a way to troubleshoot this problem? Please reply to this. I have windows xp if that helps.
Message Edited by Reyno28 on 11-02-2008 07:11 PM

If you had tried all the steps and your headset is still not working then I suggest returning the headset to the store where you purchased it and asked for replacement if your are still within the store's return period or you can contact support for further assistance.
Message Edited by Loi-CL on 11-03-2008 10:36 PM

Similar Messages

  • How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." Please help it's urgent!

    How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    You can also post in your installed os section of the message board.

  • Is the Fatal1ty USB Gaming Headset HS-1000 for Mac compatible with a PC?

    Hi,
    I mistakenly purchased the Fatal1ty USB Gaming Headset HS-1000 for Mac instead of the PC version.
    Are these still compatible with my PC even though they say "for Mac"? They have a USB connector just like my headphones and I have had people say that they "should" work, but I wanted to verify this.
    I already had one pair that I purchased a while back for my PC and they work great but my wife wanted these also and I didn't realize there were two versions. If they will still work with a PC, I will just keep them. I just didn't want to open them up and find out that they don't.
    Any help is greatly appreciated.
    Thanks.

    I found something else out , the MIC is recoginized at startup when i have the problem , but not the headphones .

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Will using a microphone help my ICD-AX412 in this occasion?

    So I understand that using a lavalier microphone helps improve the quality of the sound, mostly because you can attach it to your collar to better capture the voice. However, would it improve the quality of my voice recording if both the recorder and the microphone are together in an enclosed space?
    I ask this because I need to record while having my recorder in my backpack, for reasons. It works decently enough but I am wondering if a microphone in there would improve the quality or not.

    Just take note of these general guidelines in order to get audio quality recordings from the IC Recorder:
    Verify that nothing is rubbing up against the microphone when recording.
    Verify that the unit is not placed near an AC power source, fluorescent lamp or a cellular telephone when recording.
    Ensure fresh batteries are installed.
    Use a can of compressed air to blow into the built-in microphone to remove any built up dust or dirt.
    If an external microphone is being used, verify that the microphone is clean by wiping it with a dry, lint free cloth.
    Reset the unit by removing the batteries for at least 1 minute.
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • My Creative Fatality Headset, the microphone does not work!! please help

    Hi..
    I just received my Creative Fatality Gaming Headset last night, it's not the USB, so it's the straight plug in..And my microphone does not seem to be working, it is detected by my computer as "working" but I can't hear $hit to tell you the truth..I called Tech service a couple times and it was , i notice that a lot of people seem to be sharing the same issue, any help? It would be awesome to get my microphone working. Thanks

    Hey mate.
    Could you please say what soundcard you're using?

  • MICROPHONE HELP! plea

    Hello,.... I dont even know what to ask or?type in so..... here it goes
    I have a Creative SB X-Fi sound card(Creative X-Fi Audio Processor (WDM).. whatever that means. My headset is a Zalman Theatre 6m plus a microphone, 6 speaker headphone.. anyways... The microphone is in the optical jack. It works on my laptop just fine.
    I am running Vista 64bit. I do have onboard sound.. um crap i dunno... give me some questions so i can answer please. I need help! heh
    Thank you very much!
    -Bro -_-

    Try the suggestions in this article.
    If this does not help, it would be advisable to get in touch with support for further assistance.

  • Can I use a bluetooth headset as a microphone in iTunes?

    Don't know if this is te right forum but its about iTunes!
    I am very new to all this "wireless" tech being of the old school where everything had a wire attached but thanks to Alexander Traud I now have a phone, headset and two computers all conversing nicely wirelesly.
    So, to the question. I am the aging DJ for our ex-pats club here in Spain and use my white iBook as an iTunes jukebox at home and as the player at the club for my 50's to 70's disco. Its great not having to throw around disks of vinyl anymore and a lot lighter and smaller to carry the record collection too! I was wondering if I could use the BT Motorola H500 headset instead of the wired microphone. I have tried but despite being able to play the iTunes output through the headset (not what I want to do) and the Sound preferences indicate that when I speak I am registering on the input bar I can't get my voice out the headphone output ie. where the main disco amplifier is plugged in.
    Can I do this and if so how please. It seem a shame if you can't.
    TIA
    Mike

    Hi Robert
    Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
    Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
    It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
    Mike

  • I restored my iphone and i am not getting all of my photo stream photos  i am missing about 900 photos out of 1000 please help

    i restored my iphone and i am not getting the rest of my photos from my photo stream  i am missing about 900 out of 1000 photos  it only shows 147 photos  it is not downloading for more   i was sure i backed it up to icloud i had 1.7 free gb and it still says 1.7 gb free but i am not getting it still

    With respect, there is no way that upgrading your iPhone will erase the photos on your computer. WHy not tell us what happened exactly, nd how it relates to iPhoto. If, along the way, you can tell us what version of iPhoto, that might help to.
    Regards
    TD

  • USB Microphone help

    I have a Blue Snowball Mic that I can't get to work with Logic Express (and I want to think it worked before). It works wonderfully in Garageband. I plug it in and then go to Audio Preferences, and the mic doesn't show up. The only devices that show up are Built-In Microphone and Built-in input. Please help as I don't get a good sound out of the built-in mic.
    Thanks,
    KellyNelly

    hi,
    I have the exact same problem you had
    and from your post it looks like you solved it
    could you please help
    me I would be extremley gratefull.
    Had the problem before agragated my device
    etc.
    worked at one time and now it is not.
    this is racking my brain please help.
    This seems to be a on going problem
    so i would like to post the solution with a video on itube
    so everyone could benifit
    thank
    you

  • Drive has reported a fatal error to Disk Utility, HELP ME PLEASE!!!

    I'm a little worried my Macbook Pro has become an overpriced paperweight.
    Here's what happened:
    I had a spare 512MB RAM, which was taken out of my 24" iMac Intel Core 2 Duo when I replced it with a 1GB RAM and, after checking several sources on the web, successfully installed the extra RAM in the MBP.
    I restarted the MBP and the new RAM was registered after checking in About this Mac. I then began using the MBP as normal and wrote and saved a Word document. I clicked on the email and Safari icons in the dock and they just kept bouncing in the dock without launching. Pressed Power button - nothing. Took out the battery and replaced it after 30secs and pressed power button. All I got was the grey screen with the Apple logo and the winding circle which stayed like that for 20 minutes.
    First reaction was to remove the RAM and restart. Same endless grey screen and winding circle.
    Rebooted from CD, checked disk and repaired and said everything was OK. Restarted without CD still nothing.
    Tried Archive and Install and came back with an error during installation.
    Tried Erase and Install - same error.
    Tried to select startup disk and it no longer could find my HD yet Disk Utility could find it and told me everything was OK. Tried resetting PRAM nothing.
    Tried to erase the HD and nothing happened. Erasing a HD takes some time, but everytime I hit erase 10 seconds later it was back to the same point where I began
    Next tried to create one single partition and struck the message Drive has reported a fatal hardware error to disk utility. Even the lettering for the main drive is now in red.
    Do I need to replace the hard drive altogether or is there a solution to this problem. Was it the RAM that brought me undone or was that just a coincidence?
    PLEASE HELP ME!!!

    make sure that you haven't used it yet as RAM can only be used in one machine, not transferred to another one (like you did).
    Sorry, but that's completely untrue, and I don't know where you might have read or heard such a fallacy. RAM has no registration that even tells a system that it's been used, much less a key that would make it work only in one system. As long as the RAM is properly compatible and precautions are taken not to shock a system with static electricity while removing or inserting the component or causing mechanical damage, a RAM module can be swapped between systems as often as desired.

  • Using BT headset as a microphone?

    I am very new to all this "wireless" tech being of the old school where everything had a wire attached but thanks to Alexander Traud I now have a phone, headset and two computers all conversing nicely wirelesly.
    So, to the question. I am the aging DJ for our ex-pats club here in Spain and use my white iBook as an iTunes jukebox at home and as the player at the club for my 50's to 70's disco. Its great not having to throw around disks of vinyl anymore and a lot lighter and smaller to carry the record collection too! I was wondering if I could use the BT Motorola H500 headset instead of the wired microphone. I have tried but despite being able to play the iTunes output through the headset (not what I want to do) and the Sound preferences indicate that when I speak I am registering on the input bar I can't get my voice out the headphone output ie. where the main disco amplifier is plugged in.
    Can I do this and if so how please. It seem a shame if you can't.
    TIA
    Mike

    Using a headset needs several steps even needed if you have the latest computer or Mac OS X release. Please make sure to follow them in order.
    Download the Apple Bluetooth Firmware Updater
    Install it
    Launch it from Applications > Utilities > Bluetooth Updater
    Apply it to your adapter (takes very long).
    Start the Apple Bluetooth Assistant and select Headset. Do not use anything else!
    Make your headset Bluetooth visible. Look up the manual of your headset how to do that.
    Now select the headset in System Preferences > Sound.
    In most cases step 3 is missed. You have to start the already installed updater yourself (do not ask me why). Step 4 fails if your Bluetooth USB adapter is not supported by Apple and you have to go for a D-Link DBT-120 USB adapter.

  • Fatal problem.. Please help me..

    Hi all
    I have a fatal problem when executing any Java based application.
    when running an webApplication I get this error:
    Null pointer exception Internal error 500
    When running a server-client application I get this one:
    java.io.exception No output file could be built
    Please help me

    Hi!
    It seems to me that you are writing something somwhere. If you are writing to disk make sure that you
    have the necessary permissions to write.
    What does the application do? Does it log something, write or what?
    Regards,
    Mario Udina

  • I bought a Samson R10S microphone to use in garageband on my imac, and i can't seem to get it to record through the microphone, help?

    Need help recording on Garageband with a mic I bought.

    How are you connecting the mic to your iMac?
    Is it a USB microphone or does it need an audio port? The newer iMacs don't have a line-in port, so you'll need an audio interface to turn a USB port into an audio port, eg., the iMic as the most simple solution:
    See:   Recording with iMic in GarageBand

  • HP mini 1000 Audio Help!

    *Sigh* I was so stupid and I acted without thinking.
    I have a HP mini 1030nr and as you know, the audio or speakers suck on it. Well I was trying to fix it with a driver fix on this website  http://www.ehow.com/how_4817909_audio-problem-hp-mini-notebooks.htm and I was going through the steps and I deleted the "IDT audio" program to dowload the new one more down on that page and the link to the new program or whatever isnt working so now I dont know what to do. I'm thinking about returning the computer to the factory settings but I dont know how to do that and I cant find a program to replace it or the old program. 
    Thanks for the Help,
    Kevin.

    Go to HP's download center and download the Mini 1000 sound driver for VISTA...
     http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&dlc=en&lc=en&softwareitem=ob-6...
    My mini sounded like CRAP (tone was really thin & tinny, no bass). I play guitar here in Vegas (1-man-band, rock, blues, country, smooth jazz) and I bought my mini to play my backup music. When I heard the S**TTY sound I was ready to "return to sender", but THANX TO THE HP FORUM... I found out about downloading the sound driver for vista... now the sound is AMAAAAZING... Quick & Easy... but like the other guy said, create a restore point before you remove the existing IDT sound driver, remove the old one, and install the vista driver. WHY DOESN'T HP INSTALL THIS IN ALL THEIR MINI'S ??? GOOD LUCK...

Maybe you are looking for